british flag
Resale Logo

Category 103: milling machines

back back back
 banner advertisement information used machine tools  ZOMA Maschinenhandel  http://www.zoma.de 
banner logo
start page > metal working machines > all milling machines > results
 
2379 offers order by
post used machinery: registration     
No. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
page 1 > 2 3 4 5 6
121614952
CME FC1100
CNC Universal Milling Machines

Universal CNC milling machine. CNC Fagor 800M. Table: 1700x550mm. Longitudinal travel: 1100mm. Cross travel: 700mm. Vertical travel: 485mm. ISO50. CE.
used machine
 
Universal CNC milling machine.
CNC Fagor 800M.
Table: 1700x550mm.
Longitudinal travel: 1100mm.
Cross travel: 700mm.
Vertical travel: 485mm.
ISO50.
CE.
1998
14,000 €  
  ES   request
121596515
TOYODA FV1165

Axis X: 1092 mm Axis Y: 609 mm Axis Z: 558 mm CNC control: FANUC 0i-MD Number of tool pockets: 40 pos Spindle taper: SK40 Max. spindle speed: 12.000 rpm Spindle motor power Coolant through spindle Toolpreseter ...
used machine
 
Axis X: 1092 mm
Axis Y: 609 mm
Axis Z: 558 mm
CNC control: FANUC 0i-MD
Number of tool pockets: 40 pos
Spindle taper: SK40
Max. spindle speed: 12.000 rpm
Spindle motor power

Coolant through spindle
Toolpreseter M&H TS35
2011
Price  
  DE   request
121596464
MTE K15
Milling machine

CNC type: HEIDENHAIN X Axis: 1500 mm Y Axis: 800 Z Axis: 800 Table length: 1700 mm Table width: 750 mm Max load on table: 3000 kg Spindle taper: ISO50 Max. spindle speed: 40 - 3000 rpm Spindle motor power: 20 kW ...
used machine
 
CNC type: HEIDENHAIN
X Axis: 1500 mm
Y Axis: 800
Z Axis: 800
Table length: 1700 mm
Table width: 750 mm
Max load on table: 3000 kg
Spindle taper: ISO50
Max. spindle speed: 40 - 3000 rpm
Spindle motor power: 20 kW

Length x width x height: 4650 x 3775 x 2665 mm (without chip conveyor)
Weight: 13000 kg
2008
Price  
  DE   request
121596459
OKUMA MX45 VAE
Vertical center machine

Year of manufacture: 2000 Type of CNC control: OSP U 10 M Spindle speed: 50 - 7,000 rpm X axis: 762 mm Y axis: 460 mm Z axis: 450 mm Spindle power: 16 kW Cone Type: ISO 40 Table dimensions: 1,000 x 460 mm Maximu ...
used machine
 
Year of manufacture: 2000
Type of CNC control: OSP U 10 M
Spindle speed: 50 - 7,000 rpm
X axis: 762 mm
Y axis: 460 mm
Z axis: 450 mm
Spindle power: 16 kW
Cone Type: ISO 40
Table dimensions: 1,000 x 460 mm
Maximum table weight: 500 kg
Charger Capacity tools: 32
Fast movements: 20/20/15 m / min








2000
Price  
  ES   request
121596457
TOS FRPD 16
Plano Miller

Table dimensions: 1600 x 6500 mm Spindle: 15-1500 rpm Distance of spindles: 1220 - 1710 mm Distance between spindles from the table: 110 - 1685 mm Removal of columns: 2020 mm Height of table: 900 mm Engine po ...
used machine
 
Table dimensions: 1600 x 6500 mm
Spindle: 15-1500 rpm
Distance of spindles: 1220 - 1710 mm
Distance between spindles from the table: 110 - 1685 mm
Removal of columns: 2020 mm
Height of table: 900 mm
Engine power: 7.5 kW
Machine dimensions:
(L x W x H) 14780 x 5000 x 4700 mm
Machine weight: 72000 kg
1967
Price  
    request
121596394
DMG MORI LASERTEC 65
Milling Centers

OVERVIEW: Brand: DMG MORI Model: LASERTEC 65 Application type: Milling Machine type: Machining Center Availability: Immediately Production year: 2014 Production hours: 4089 Spindle hours: 762 Laser hours: 3169  ...
used machine
 
OVERVIEW:
Brand: DMG MORI
Model: LASERTEC 65
Application type: Milling
Machine type: Machining Center
Availability: Immediately
Production year: 2014
Production hours: 4089
Spindle hours: 762
Laser hours: 3169
Beam hours: 2316
Location: Germany

GENERAL DATA:
Measurements width: 4180 mm
Measurements depth: 3487 mm
Measurements height: 2884 mm
Machine weight: 11500 kg

MAIN DRIVE:
Number of spindles: 1
Spindle speed range: 20-18000 1/min
Spindle motor power: 13 kW
Tool taper: HSK-A 63
Laser type: Ytterbium
Laserpower: 2000 W

CONTROL UNIT:
Brand: Siemens
Model: SINUMERIK 840D
Interface: USB. Ethernet
Remote control: yes

MOVEMENT:
X-AXIS:
Movement: 735 mm
Working feed: 0 - 40000 mm/min
Feed force: 7 kN
Rapid traverse: 40 m/min
Backlash: 0.02 mm

Y-AXIS:
Movement: 650 mm
Working feed: 0 - 40000 mm/min
Feed force: 13 kN
Rapid traverse: 40 m/min
Backlash: 0.02 mm

Z-AXIS:
Movement: 560 mm
Working feed: 0 - 40000 mm/min
Feed force: 10 kN
Rapid traverse: 40 m/min

A-AXIS:
Movement: ±120°
Working feed: 7200 °/min
Rapid traverse: 20 1/min
Backlash: <0,01°

C-AXIS:
Movement: 360°
Working feed: 14400 °/min
Rapid traverse: 40 1/min
Backlash: 0,01°

WORKPIECE:
Workpiece weight: 600 kg

TABLE:
Outer length: 650 mm
Outer width: 800 mm
T-Slots size: 14 mm
Number of T-Slots: 9

TOOLS:
Slots in storage: 60
Max weight: 8 kg
Max tool diameter: 160 mm
Max tool length: 315 mm

MEDIA:
Main electronic connection: 2x 400V / 50 Hz
Power consumption: 66 kVA
Air pressure: 6 bar
Lubrication tank: 500 L
Oil/water separator: yes
Chip conveyer: yes
Internal cooling: yes
Cooling pressure: 40 bar


ADDITIONAL EQUIPMENT:
1 - New Toolholders
2 - Workpiece measuring system
3 - Renishaw PP60 optical
4 - Bluhm tool measuring system
5 - Air cooling through spindle
6 - 3D quickset Toolkit
7 - Lasersoft 3D-Texture software
2014
Price  
  DE   request
121595044
BUTLER TE-4000
CNC bed milling machine

Make BUTLER NEWALL,. Built in approximately 1983, control SINUMERIK 810 M, with automatically adjustable universal milling head. The machine is only sporadically in use since the year 2000. 4360 x 1000 mm table size  ...
used machine
 
Make BUTLER NEWALL,.
Built in approximately 1983, control SINUMERIK 810 M, with automatically adjustable universal milling head.
The machine is only sporadically in use since the year 2000.
4360 x 1000 mm table size
Table X-axis 4000 mm
Headstock Y-axis (increased) 1600 mm
Headstock Z axis 1000 mm
Max permissible weight on table 10500 kg
Tool holder ISO 50
Speeds of approximately 15-2000 RPM.
Rapid traverse x axis 6 m / min.
Tool changer 30-fach
20 kW
Total weight approx. 20 t
Overall height approx. 3.60 m

Accessories:
Coolant system, separate hydraulic unit, separate control cabinet.
 
Price  
    request
121578484
WALDRICH WR2
Plano-milling machines

ONLINE AUCTION of HEAVY DUTY EQUIPMENT (France) Bidding only on the Troostwijk Auction website Planer milling machine with 2 uprights Waldrich WR2. For more information please visit our website Reference: Auctio ...

 
ONLINE AUCTION of HEAVY DUTY EQUIPMENT (France)
Bidding only on the Troostwijk Auction website

Planer milling machine with 2 uprights Waldrich WR2.

For more information please visit our website
Reference:
Auction name : HEAVY DUTY EQUIPMENT
Auction number: 25489
 
used machinery auction RESALE Price  
  FR   request
121578474
WALDRICH WR4
Plano-milling machines

ONLINE AUCTION of HEAVY DUTY EQUIPMENT (France) Bidding only on the Troostwijk Auction website Planer milling machine Waldrich. For more information please visit our website Reference: Auction name : HEAVY DUTY  ...

 
ONLINE AUCTION of HEAVY DUTY EQUIPMENT (France)
Bidding only on the Troostwijk Auction website

Planer milling machine Waldrich.

For more information please visit our website
Reference:
Auction name : HEAVY DUTY EQUIPMENT
Auction number: 25489
 
used machinery auction RESALE Price  
  FR   request
121560100
ANAYAK HVM 12000
Moving-Stand-Milling Maschine

Anayak HVM 12000 x trail 11.300 mm y way 2,000 mm z-way 2,600 mm Control: CNC HEIDENHAIN iTNC 530 a-axis + 45 / - 225° (1°) ° b-axis (1°) +165 /-180° ° Milling head boom, rigid 1800 mm Tool holder 50  ...
used machine
 
Anayak HVM 12000

x trail 11.300 mm
y way 2,000 mm
z-way 2,600 mm
Control: CNC HEIDENHAIN iTNC 530

a-axis + 45 / - 225° (1°) °
b-axis (1°) +165 /-180° °

Milling head boom, rigid 1800 mm
Tool holder 50 SK
Speed range 60-4000 RPM
Spindle motor 38 / 28 (S2 / S1) kW
Gr. Torque 1994 / 1469 (S1 / S2) NM
Spindle outer diameter in front bearing 140 mm
Feed range 10-6000 mm
Rapid traverse rate 15 / 10 m
Number of tools in magazine 60
Gr. Tool diameter 125 / 200 mm
Gr. Tool length 400 mm
Gr. Tool weight 25 kg

Total power consumption 60 KVA

FACILITIES
NC orthogonal milling A + B 1°
60 x tool changer
RENISHAW - infrared - measuring probe preparation without button
Spindle exhaust device
Spindle chiller
Transmission oil cooler
Hydr. Weight balance
closed cabin driving with
Internal coolant system
Chip conveyor
Spindle hours: 14.241 hours, machine hours: approx. 36.837 h

NO PLATE BOX

Complete documentation available as well as full foundations and reinforcement plans.

The machine comes from a bankruptcy, is dismantled and properly stored.

Repairs (head, Y-axis, etc). Very good basis for retrofit or repair.

We used purchased two identical machine and erected one at us.

The newly formed us and already repaired machine is on the photos.

Very good contacts to the repair and installation available.
2005
79,000 €  
    request
121505327
CINICINNATI Arrow 1500
Milling Centers

Vertical machining centre with 3 axle control, little used vertical machining center with 3 axis control, little used Type: ARROW 1500 Serial / make: Cincinnati Milacron Year / year: 1998 Control / control: HEIDENH ...
used machine
 
Vertical machining centre with 3 axle control, little used vertical machining center with 3 axis control, little used

Type: ARROW 1500
Serial / make: Cincinnati Milacron
Year / year: 1998
Control / control: HEIDENHAIN TNC 410

x / x way: 1524mm, y axis / y way: 762mm, Z-axis / z way: 770mm, distance spindle - table / dist.
Spindle to table: 175-945 mm, throat / throat: 773mm, Arbor. / spindle diam: 140mm, spindle carrier / taper: SK 40
Spindle length / spindle length: 110 mm, spindle drive / drive spindle: 21 kW size of table / table: 1778x765mm, load table load: 2.5 t, speed / spindle speeds: 60-6000/min, feed / feed: 3-15000mm / min, rapid feed rate / rapid travel: 24 m / min, tool places / number tools: 21
Tool weight / weight of tool: 6, 8 kg, Max tool length / tool length: 385 mm max.
Machine dimensions / do. dimensions: Length / length: 4200mm, width / width: 3500mm
Height / height: 3600mm, weight / weight: 9, 5T
Power consumption / connected load: appr. 52 kW

Specification / specification:

Measuring probe Renishaw T.S. 27
Electron. Handwheel / electronic 20603j
Spindle coolant / spindle internal coolant
TNC EXE software
1998
Price  
    request
121505317
MAHO MH 800 W
Universal Tool-Milling Machines

Traverse paths: X 800 mm, Y-axis 500 mm, Z axis clamping surface 1.100 x 600 mm, 550 mm, max. work piece weight 500 kg, control HEIDENHAIN TNC 415
used machine
 
Traverse paths: X 800 mm, Y-axis 500 mm, Z axis clamping surface 1.100 x 600 mm, 550 mm, max. work piece weight 500 kg, control HEIDENHAIN TNC 415
1992
used machinery auction RESALE Price  
    request
121488441
MAZAK Integrex E 650 H
CNC Milling Centers

Swing over bed Ø 920 mm Control Tower Mazatrol Matrix NEXUS Distance between centres 4000 mm Spindle bore 170 mm Spindle speeds/1600 Rpm ranges Power 30 Kw
used machine
 
Swing over bed Ø 920 mm
Control Tower Mazatrol Matrix NEXUS
Distance between centres 4000 mm
Spindle bore 170 mm
Spindle speeds/1600 Rpm ranges
Power 30 Kw

2002
Price  
  NL   request
121488399
REICHENBACHER
CNC Milling Machines

Built in 1983, control 2M. 8 k memory capacity, 3 Achen X 1000 Y1300 Z130mm, portal design with Supernatants, all 3 engines can reach the entire work area. The machine has only 8281 hours of operation, but is not ready f ...
used machine
 
Built in 1983, control 2M. 8 k memory capacity, 3 Achen X 1000 Y1300 Z130mm, portal design with Supernatants, all 3 engines can reach the entire work area. The machine has only 8281 hours of operation, but is not ready for use in the current state (TV card is defective). A refit with new control is recommended.
1983
Price  
    request
121470990
DECKEL FP1
Lathe

X-travel: 300mm, y-travel: 150mm, z-travel: 340mm, quill stroke: 60mm, feed rate: 5-500mm/min, rapid traverse: 1200mm/min, table load: 300kg max., motor power: 0.59kW, rotational speed: 40-2000/min, spindle power: 1.5-1. ...
used machine
 
X-travel: 300mm, y-travel: 150mm, z-travel: 340mm, quill stroke: 60mm, feed rate: 5-500mm/min, rapid traverse: 1200mm/min, table load: 300kg max., motor power: 0.59kW, rotational speed: 40-2000/min, spindle power: 1.5-1.9kW, clamping surface: 195x600mm, clamping bolts: 2x12mm, T-bolt distance: 90mm, voltage: 380V, connected laod: 9.5kVA, length: 1700mm, width: 1800mm, height: 1360mm, weight: 800kg.
 
Price  
  DE   request
121468528
DECKEL FP 2 A
CNC universal milling and boring machine

3 D contouring GRUNDIG contour 3, fixed angle table. X axis 300 mm Y axis 300 mm Z axis (vertical) 400 mm Quill stroke 80 mm Toolholder SK 40 Speed range approx. 40 - 4000 RPM. power 2 kW Weight approx. 1,3 t  ...
used machine
 
3 D contouring GRUNDIG contour 3, fixed angle table.
X axis 300 mm
Y axis 300 mm
Z axis (vertical) 400 mm
Quill stroke 80 mm
Toolholder SK 40
Speed range approx. 40 - 4000 RPM.
power 2 kW
Weight approx. 1,3 t

Accessories: separate coolant system.
1987
Price  
    request
121451120
MAZAK VTC-30C
CNC Milling Machines

STOCK NUMBER: 3128 CNC-VERT. MACHINING CENTER BRAND: MAZAK, TYPE: VTC-30C M +. MACHINE NUMBER: 128064, YEAR OF CONSTRUCTION: 1997 Specifications: table size 2000 x 760 mm Size table load 1000 kg Longitudinal move ...
used machine
 
STOCK NUMBER: 3128
CNC-VERT. MACHINING CENTER
BRAND: MAZAK, TYPE: VTC-30C M +.
MACHINE NUMBER: 128064, YEAR OF CONSTRUCTION: 1997

Specifications: table size 2000 x 760 mm
Size table load 1000 kg
Longitudinal movement (x) 1660 mm
Cross movement (Y) 760 mm
Vertical movement (Z) 660 mm
Spindle taper ISO 40
Spindle speeds 40-7000 RPM
Total power of 11 kW
Accessories: Cooling through spindle coolant system.
Chip promotion.
Tool changer / number Stati 48 stations
Control Mazatrol M plus

Length 4320mm, height 2850 mm, width 3380 mm, weight 8700 kg
1997
Price  
    request
121434185
SANDVIK Freeskop T-MAX 45 Coromat
CNC Milling Centers

Auction name Machinefabriek Heerlen in Hoensbroek Public online auction. Start of auction: 31 October 2017 17:00 GMT +0200 (Western Europe (DST) Closing time: 21 November 2017 16:00 GMT +0200 (Western Europe ...
used machine
 
Auction name Machinefabriek Heerlen in Hoensbroek


Public online auction.


Start of auction: 31 October 2017 17:00 GMT +0200 (Western Europe (DST)
Closing time: 21 November 2017 16:00 GMT +0200 (Western Europe (DST)


The price listed is an opening bid.


To participate in the auction and for more information go to: Bva-Auctions
 
used machinery auction RESALE 10 €  
  NL   request
121434163
RECKERMAN KOMBI Kombi 1000
Milling Machines

Auction name Machinefabriek Heerlen in Hoensbroek Public online auction. Start of auction: 31 October 2017 17:00 GMT +0200 (Western Europe (DST) Closing time: 21 November 2017 16:00 GMT +0200 (Western Europe ...
used machine
 
Auction name Machinefabriek Heerlen in Hoensbroek


Public online auction.


Start of auction: 31 October 2017 17:00 GMT +0200 (Western Europe (DST)
Closing time: 21 November 2017 16:00 GMT +0200 (Western Europe (DST)


The price listed is an opening bid.


To participate in the auction and for more information go to: Bva-Auctions
 
used machinery auction RESALE 600 €  
  NL   request
121434144
MAHO MH 800 W
CNC Universal Milling Machine

X-travel: 800mm, y-travel: 500mm, z-travel: 550mm, clamping table dimensions: 1095x600mm, control: Heidenhain CNC 234.
used machine
 
X-travel: 800mm, y-travel: 500mm, z-travel: 550mm, clamping table dimensions: 1095x600mm, control: Heidenhain CNC 234.
1994
Price  
  DE   request
page 1 >
You didn't find your wanted machine? to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Find used machinery dealers in your country