309 items ordered by:

item-No.: 126063249
-
10.250 €
country-pl PL
Baler for cans and aluminum waste Used machine, after renovation Price: 10 250 euro’s (netto price) Technical details: - baled aluminum block 28 x 56 cm, the thickness can be regulated - engine 18 kW - oil tank 400 liter - working cycles: automatic or manual - 3 months warranty - the machine is ready for work If you have any another questions, don’t hesitate to contact us! Telephone: +48 783 891 132 or e-mail adress: biuro@bartontech.pl / bartontech.eu@gmail.com Our webpage: abc.bartontech.eu  ...
item-No.: 126124006
Pressure total: 63 ton Stroke: 160 mm Daylight: 400 mm distance between the columns: 670 mm Spindle adjustment: 250 mm Table surface area : 630 x 500 mm Ram surface area: 500 x 400 mm Roll bending adjustment: 850 mm Cushion capacity in table: 160 ton Cushion stroke: 80 mm Cushion area: 125 mm Approach speed: 330 mm / sec Working speed: 36 mm / sec Return speed: 305 mm / sec Oil volume: 250 l Required power: 11 kW Weight of machine approx.: 3,5 ton
item-No.: 126063247
-
23.000 €
country-pl PL
Horizontal semi-automatic bailer MACFAB Used machine, after renovation Production year: 2006 Pressure: 60 tons Price: 23 000 euro’s Technical details: - Engine 22kW - Machine length 7.5m - Bale weight 650kg - Bale dimensions: 80 x 110 x 120cm - Wiring: 4 wires, horizontally - Pressure 60 tons - Oil tank 1000 litre If you have any another questions, don’t hesitate to contact us! Telephone: +48 783 891 132 E-mail adresses: biuro@bartontech.pl / bartontech.eu@gmail.com Our webpage: abc.bart ...
item-No.: 126119457
Manufacturer PresonaTyp LP 80 VH2Year of construction 2002Working hours 62,540 hPress power main press 78,5 tonsSpecific press capacity 97 N/cm² Press power of pre-press 28 tonsVolume of pressing chamber 2,7 m³Feed channel1,500 x 1,100 mmTheoretic throughput rate 1,200 m³/hThroughput rate under operating conditions 560 m³/hBale size 750 x 1,100 mmDriving motor 2 x 45 kWTying system 5 fold vertical, full automaticThroughput rate approx. 13 up to 30 tons/h, depends on materialBale weight 450 up to 600 kg, depen ...
item-No.: 126063245
-
17.000 €
country-pl PL
Horizontal semi-automatic baler Used machine Price: 17 000 euro’s (netto price) Technical details: - Bale dimensions: 110cm x 110cm x 120-150cm - Pressure: 50 tons - The inlet size: 110 x 130cm - Engine: 15kW - Length of the machine: 6m - Width of the machine: 2.2m - Height of the machine: 3m - Wiring: 4 wires, horizontally - The machine works perfect - Available at any moment If you have any another questions, don’t hesitate to contact us! Telephone: +48 783 891 132 or e-mail adress: biuro@ba ...
item-No.: 126119481
Manufacturer MACPRESSETyp 111/1Year of construction 2008Press power main press 170 tonsSpecific press capacity 14 kg/cm²Feed channel 1,800 x 1,020 mmFilling volume 2,5 cm³Theoretic throughput rate 750 m³/hBale size 1,100 x 1,100 mmDriving motor 2 x 75 kWTying system 5 fold horizontal, full automaticThroughput rate at a approx. 30 up to 35 tons/h, depends on materialVolume hydraulic oil tank 3,000 lBaler dimensions built up with hopper 11,460 x 5,945 x 4,055 mm (L x w x h)Machine weight baler approx. 40 tonsComm ...
item-No.: 126063243
-
27.500 €
country-pl PL
Semi-automatic channel baling press Lindemann BLT 614/55 Price: 27 500 euro’s (netto price) The machine is used, but in very good condition. It works perfect, available to be sold every moment. If you have any another questions, don’t hesitate to contact us! Telephone: +48 783 891 132 or e-mail adress: biuro@bartontech.pl / bartontech.eu@gmail.com Our webpage: abc.bartontech.eu
item-No.: 126087551
Manufacturer PaalType Konti 275 GSYear of construction 2012Hours of operation 11,785 h, stand AprilPress power main press 80 tonsSpecific press capacity 97 N/m³Idle volume capacity 590 m³/hourCapacity at 35kg/m³ approx. 360 m³/hourFeed channel 1,750 x 1,020 mmCapacity per cycle time 2 m³Bale size 750 x 1,100 mm, length variableDriving motor 55 kWConnected load 72 kWTotal rated current 130 ABack-up fuse 160 ATying system 5 fold vertical, fully automaticBale weight up to 750 kg, depends on materialVolume hydraul ...
item-No.: 125994762
Manufacturer Europress, Lathen Type EP 120 V5H2 Year of construction 2015 Press power 120 t Motor power 2 x 45 kW Feeding opening 1.000 x 2.000 mm Channel cross-section 750 x 1.100 mm Bale size 750 x 1.100 mm Throughput rate with 35 kg/m³ 22 t/h Throughput rate with 60 kg/m³ 36 t/h Throughput rate with 100 kg/m³ 44 t/h Bale weight 600-900 kg Binding 5-fold vertical, 2-fold horizontal Dimensions Approx 12.655 x 2.580 x 3.505 mm (LxWxH) Machine weight Approx 32.000 kg
item-No.: 126087613
Manufacturer AvermannTyp AVOS 1810S-90/100Year of construction 2005Hours of operation 23,072 hQuantity of pressed bales 16,163 piecePress power main press 100 tonsSpecific press capacity 121,2 N/cm²Feed channel 1,000 x 1,800 mmCapacity per cycle time 1,35 cm³Theoretic cycle time 12,5 sec.Bale size 1,100 x 750 mmDriving motor 2 x 45 kWConnected load 130 kWTying system 5 fold vertical, full automaticThroughput rate at abulk weight of 30 kg/cbm approx. 12,2 tons/hbulk weight of 50 kg/cbm approx. 16,0 tons/hbulk we ...
item-No.: 125994761
Manufacturer Europress, Lathen Type EP 60 V4 Year of construction 2015 Press power 60 t Motor power 2 x 22 kW Feeding opening 1.000 x 1.600 mm Channel cross-section 750 x 1.100 mm Bale size 750 x 1.100 mm Throughput rate with 35 kg/m³ 11 t/h Throughput rate with 60 kg/m³ 13 t/h Throughput rate with 100 kg/m³ 22 t/h Bale weight 400-500 kg Binding 4-fold vertical, fully automated Dimensions Approx 9.920 x 2.580 x 3.465 mm (LxWxH) Machine weight Approx 16.000 kg
item-No.: 126057728
Manufacturer PaalTyp Pacomat 2Year of construction 1979Press power main press 27 tonsFeed channel 1,000 x 650 mm (l x w)Theoretic Troughput 200 cbm/hBale size 700 x 1,000 mm (w x h) length adjustableDriving motor 20 kWTying system 4-fold horizontal, fully automatedBale weight approx. 400 kgTransport dimensions only baler approx. 7,600 x 1,720 x 2,500 mm (l x w x h)Machine weight baler 5 tons Comments: The baler was overhauled in 2017. Inspections are possible after agreement. We will not assume liability for the ...
item-No.: 125994760
Manufacturer: Europress, Lathen Type: EP 3000 V4 Year of construction: 1998 Press power: 60 t Drive power: 22 kW Feed channel: 900 x 1.050 mm Bale size: 730 x 1.050 mm (HxW) Bale weight: min. 450 kg Tying system: 4-fold vertical, automated Machine dimension: 6.450 x 1.970 x 3.120 mm (LxWxH) Machine weight: approx. 11.000 kg
item-No.: 126057732
Manufacturer PaalTyp Konti 700 EYear of construction 2007Hours of operation 22,500 hPress power main press 170 tonsSpecific press capacity 14 kg/cm²Feed channel 2,000 x 1,020 mm (l x w)Capacity per cycle time 3,45 cbmThroughput rate under operating conditions 650 cbm/hBale size 1,100 x 1,100 mm (w x h) length adjustableDriving motor 3 x 75 kWConnected load 255 kWTying system 5-fold vertical, fully automatedThroughput rate bulk weight of 30 kg/cbm approx. 16 tons/hbulk weight of 50 kg/cbm approx. 26 tons/hbulk wei ...
item-No.: 125994748
-
BN 13.399 €
-
All prices are net plus 19% VAT and freight/shipping A pick-up is possible by appointment only. Sale only to professionals. Manufacturer: BRAMIDAN â?¢ Model: X 50 L â?¢ Pressing force [t]: 50 â?¢ Bale weight [kg]: 400bis 600, depending on the material â?¢ Bale size [cm]: 136 x 78 x 120 â?¢ stock: 1 piece â?¢ External dimensions WxDxH [cm]: 209 x 153 x 288 â?¢ Machine weight [kg] 2670 â?¢ Filling opening W x D [cm]: ...
item-No.: 126057734
Manufacturer StrautmannTyp Bale TainerYear of construction 2010Hours of operation 4.100 hoursPress power main press 60 tonsFeed channel 2,815 x 1,085 mm (l x w)Bale size 1,100 x 1,100 x 700 mm (w x d x h)Driving motor 9,2 kWConnected load 15 kWTying system 4 fold vertical, fully automatedBale weight up to 400 kg, depends on materialSPS controller (manuf., type) Siemens S7 1200Operating panel (manuf., type) Siemens Simatic Touch PanelBaler dimensions built up with hopper approx. 8,841 x 3,140 x 3,100 mm (l x w x h)T ...
item-No.: 125994726
-
BN 9.800 €
-
All prices are net plus 19% VAT and freight/shipping A pick-up is possible by appointment only. Sale only to professionals. Technical details of used baler: â?¢ Manufacturer: HSM â?¢ Model: V-press 818 â?¢ Pressing force [kN]: 185 (about 18.87 tonnes) â?¢ Motor power [kW]: 3 â?¢ Voltage: 3 ~ 400 V, 50 Hz â?¢ Bale size WxDxH [cm]: 120 x 78 x max. 70 â?¢ Maximum bale weight depending on the material [kg]: 200 â?¢ dim ...
item-No.: 126057736
Manufacturer BollegraafType HBC 140Year of construction 2003Working hours 39,542 hPress power main press 140 tonsPress power of pre-press 70 tonsFeed channel 1,600 x 1,100 mm (l x w)Capacity per cycle time 4,34 cbmTheoretic cycle time 16 sec.Bale size 1,100 x 1,100 mm (w x h) length adjustableDriving motor 2 x 75 kWConnected load 209 kWTying system 5-fold vertical, fully automatedThroughput rate at a bulk weight of 30 kg/cbm approx. 30 tons/hbulk weight of 50 kg/cbm approx. 46 tons/hbulk weight of 100 kg/cbm appro ...
item-No.: 125983151
Bale press Manufacturer BOA Type 2040 22 KP Year of construction 1996 Press power 70 t Drive power 30 kW Feed channel 1.200 x 1.020 mm (w x l) Throughput rate at 30 kg/m³ 2-5 t/h Throughput rate at 60 kg/m³ 6-9 t/h Throughput rate at 100 kg/³ 8-11 t/h Bale size 1.100 x 720 mm (w x h), at variable length Bale weights 350-500 kg, depending on material Tying system 4-fold vertical, automated Hydraulic tank capacity 800 l Machine dimensions 10.020 x 2.060 x 4.000 mm (l x w x h) Machine weight approx.  ...
item-No.: 126057740
Manufacturer PaalTyp Konti 700 F/KYear of construction 2009Hours of operation approx. 44.000 hPress power main press 170 tonsSpecific press capacity 14 kg/cm²Feed channel 2,000 x 1,020 mm (l x w)Capacity per cycle time 3,45 cbmThroughput rate under operating conditions 650 cbm/hBale size 1,100 x 1,100 mm (w x h) length adjustableDriving motor 3 x 75 kWConnected load 255 kWTying system 5 fold vertical, 4 fold horizontal, fully automatedThroughput rate bulk weight of 30 kg/cbm approx. 16 tons/hbulk weight of 50 kg/ ...
You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)