english language
Resale Logo

Category 305: peripheral equipment (e.g. heating,cooling,drying)

back back

179 used peripheral equipment heating cooling drying

used machinery sale offers sorted by date

Go to the full result list of the category:
with sub-categories, search word input, manufacturer search and more machines
Date Photo Machine Year Price Country No.
page 1 >
19.07.2017
Conveyor belts MULTI TECH GL AM 140
1 x Multi Tech GL AM 010, conveyor 1800 x 600 mm with a support, built in 2013 2 x Multi Tech GL AM 010, conveyor belt 2000 x 600 mm with a support, built in 2013 1 x Multi Tech GL AM 140, conveyor belt 2000 x 600 mm with two supports, year 2013
2013
   
  DE   106845526
17.07.2017  
Spectrophotometer COLORLITE sph860
Measurement geometry: 45°0°. Illuminants: D65, D55, D50, A, C, F11. Standard observer: 2°, 10°, colour scales: XYZ, Yxy, Delta E CIE Lab, Luv, LCh, Hunter Lab. Spectral light source measurement: 400-700nm, spectral resolution: 500nm12h, Memory: 1000 standard colours, 1000 colour values, 300 spektra (400-700nm 3.5nm), dimensions: 180x82x40mm, weight: 370g, climatic conditions: 15-45°C, relative humidity: 85% max., number of photometer: 2, machines are as good as new.  ...
 
ON    
  DE   106797284
20.07.2017
WATER COOLING UNIT TOOL TEMP 5000
M. No.: 22-02995-1 Power : for water temperature from +10°C up to +40°C, Equipment Additional information: Device Category: Water chiller (air cooled) Cooling: indirectly Application area: Plastic industry Temperature range: +10°C up to +40°C Cooling capacity: 4 kW at 25°C Pump power: 0.8 kW Temperature control: MP-888
 
 
offer is possible  
  CH   105318028
19.07.2017
Printer witness purity BATTENFELD Airmould DE 14
Flow rate m3min 450 5.5 kW Operating pressure 350 bar Capacity 100 litres
2000
 
offer is possible  
  DE   105270987
17.07.2017
MTA Minichiller TAEevo M05
1.8 kW, MTA Minichiller, type: TAEevo M05 M.T.A. S.p.a.. TAEevo M05 are small recirculating coolers suitable for indoor installation . Including buffer tank (open system, not a pressure accumulator) and a built-in circulation pump - suitable for thermal regulators Cooling capacity kW 1.8 Watertemp. Exit entry: 7 12 ° C,. Flow rate m³h 0.31 Ambient temperature ° C 32,. Refrigerant R 407c. Electrical data: Voltage V 230 frequency Hz 50, phase pH 1,. Maximum power consumption (kW) 1.6 Max current (A) 7.0  ...
2015
 
offer is possible  
  DE   104962044
20.07.2017
OMAP 16.000 lt
VERTICAL MIXER 16 m3 Dimensions: 2450 × 2150 × 6200 h feeding bunker inner lifting auger Construction year 2008 15 kw motor details attached photo and data sheet attached
2008
 
offer is possible  
  IT   99009498
25.05.2017
Temperature control units HB-THERM Series 4
Power: 8 kW maximum temperature: 140 ° C
2005
BN 1,240 €
offer is possible  
  CH   98670601
25.05.2017
Temperature control units TOOL-TEMP 162 E
Power: 13.1 kW tank capacity: 16 l
 
BN 1,480 €
offer is possible  
  CH   98670118
25.05.2017
Unlubricated air dryer HERAEUS LUT 5050 EK
Power: 2900 Watts Internal dimensions: Height: 50 cm Depth: 45 cm Width: 40 cm External dimensions: Height: 66 cm Depth: 80 cm Width: 80 cm Weight: 85 kg
1988
BN 680 €
offer is possible  
  CH   98669883
25.05.2017
MEMMERT dry oven ULE 600
Made entirely in stainless steel. With 6 shelves. Power: 2400 W Internal dimensions: Height: 64 cm Depth: 50 cm Width: 80 cm External dimensions: Height: 90 cm Depth: 65 cm Width: 95 cm
1992
BN 1,580 €
offer is possible  
  CH   98669405
25.05.2017
Unlubricated air dryer MEMMERT ULE 600
Made entirely in stainless steel. Power: 2400 watts Internal dimensions: Height: 64 cm Depth: 50 cm Width: 80 cm External dimensions: Height: 90 cm Depth: 65 cm Width: 95 cm
1992
BN 1,480 €
offer is possible  
  CH   98668501
19.07.2017
Temperature control units TOOL TEMP TT-180
3 x 380-415 v Watt9'850 Hz 50
 
 
offer is possible  
  DE   96629182
16.05.2017
Microlipid water conveyor SONDERMASCHINENBAU
Microlipid conveyor with dry blower water Total ca 3.6 m length Pool length approx. 3 m Wide basin ca 0.6 m Wide band ca 0, 5m Basin stainless steel
 
3,500 €
offer is possible  
  DE   96370391
17.07.2017
Water Chiller MTA TAE Evo 015 SPECIAL
Used water chiller with a nominal refrigeration capacity of 5 kW TAE Evo 015 SPECIAL are compact cold water chiller that are suitable for outdoor installation. Including crankcase heater, phase monitoring, buffer tank, and built-in P5 circulation pump. With Hotgas-bypass and as NON FERROUS version ideal for processes that allow only minimal temperature variations. Cooling capacity kW 5,06 Cold water temperature exit entry: 7 12 ° C Flow rate m³h 0.868 Ambient temperature ° C 32 Refrigerant R 407c. Electrical dat ...
2015
 
offer is possible  
  DE   96347551
11.05.2017
Granulate dryers LABOTEK DDM 60 HT
Power: 9.5 kW Including conveyor
1991
BN 2,880 €
offer is possible  
  CH   94498908
08.05.2017
Refrigerating machines KRONE RWL-150-HR
Technical description photo see nameplate. Device has with container together € 7.850,-net new cost. Was hardly in use. Price on request
2015
 
offer is possible  
  DE   94241040
20.07.2017
vertical mixer, fountain blender GIOIA 9 m3 blender
VERTICAL MIXER 9 m3 Dimensions: Total height 4510 mm. 1,900 mm diameter barrel. 2,650 x height Cone: 1,900 xx diam. 1,850 x height inner screw 350 mm. diam. discharging side pipe for bags diameter 160 with valve (positioned at 2,700 mm from ground level) loading hopper 550 x 600 mm. can be loaded from top # 2 doors for cleaning purposes 11 kw motor painted steel structure machine is offered overhauled with sworn appraisal
2017
6,000 €
offer is possible  
  IT   93048689
01.06.2017
hot runner systems Feller Engineering FELLER ENGINEERING FP
warehouse no.: 502339 manufacturer: Feller Engineering GmbH Typ: FP 13 - GA 13 year of construction: gebr how to get information FP 13 -GA 13 control systems. Temperature compact control systems for 13 control circuits. voltage 400 Volt
 
 
offer is possible  
  DE   93048688
04.05.2017
CINPRESS CPC3000 MF-4V-A8
GID attachment as peripheral for injection control unit 7zul2let8 It's to a "Cinpress CPC3000 MF-4V-A8" facility of the year 2003. The new price was over 75.000.-€. The facility was used exclusively in the laboratory for prototyping. The State is therefore as good as new.
2003
 
offer is possible  
  DE   92426413
01.06.2017
GWK integat plus itp 80-0
warehouse no.: 502240 manufacturer: GWK Typ: integat plus itp 80-06 year of construction: 2011 The offered gwk temperature control system integrat plus itp 80-06 is equipped with 6 control loops and can be extended by two additional control loops. Keyfeatures handling weight 40,5 kW Heating capacity 6 kW je Heizkreis cooling capacity 47 kW Motor power 0,55 kW Temperatur max. 140 Grad Celsius Circulating fluid Wasser
2011
 
offer is possible  
  DE   91312203
01.06.2017
pressure generator BATTENFELD Airmould DE 11
warehouse no.: 501973 manufacturer: BATTENFELD Typ: Airmould DE 11 year of construction: 2012 Output 100 NImin; 6 Nm³h, drive capacity 2.2 kW, max. operating pressure 330 bar; storage capacity 50 ltr; inclusive to the delivery is the monomodul, three pressure regulator modules and a mobile controller unit with controller UNILOG B4 For many cases is the gas injection sufficient at only one point. The mono modules have been developed for this case. The mono modules offer the same advantages as the pressure control modules. ...
2012
 
offer is possible  
  DE   91028470
01.06.2017
temperature controller REGLOPLAS P120XL-30-CR8-80-1K-RT50
warehouse no.: 501842 manufacturer: regloplas Typ: P120XL-30-CR8-80-1K-RT50 year of construction: 2004 Outlet temperature max. 120 °C Heat transfer fluid: Water Filling quantity: 38 liter Pump type: CR8-80 Flow rate: 200 lmin presure max.: 8,7 bar Heating capacity at 400 V: 30 kW Cooling capacity: 100 kW at outlet temperature 110 °C Controller: RT 50 Operating voltage: 400V50 Hz Connections: Outletinlet 2" - Cooling warer supply 1"
2004
 
offer is possible  
  DE   91028457
01.06.2017
hot runner systems FELLER ENGINEERING FP 13
warehouse no.: 501684 manufacturer: Feller Engineering Typ: FP 13 year of construction: gebr technical referenz: hot run system with 10 control circuits, 230 Volt, FE thermal sensor The control and operating devices of FELLER ENGINEERING be supplied on request with various installation accessories
 
 
offer is possible  
  DE   91028424
19.04.2017
Hot runner controllers ENRIETTI Enrietti 1A
1985
BN 480 €
offer is possible  
  CH   89636559
19.06.2017
Temperature control units REGLOPLAS 300s
Power: 7.5 kW. For use with oil. Was used only in laboratory environment and was used only very rarely. Excellent condition.
2006
BN 3,480 €
offer is possible  
  CH   89636553
11.05.2017
Temperature control units REGLOPLAS P160
Power: 7.5 kW Was only used in laboratory environment and used very little. Excellent condition.
1993
BN 1,880 €
offer is possible  
  CH   89636551
19.04.2017
Granulate conveying devices MATERIAL SILO MOVEABLE 120 L - A
 
BN 540 €
offer is possible  
  CH   89636549
11.05.2017
Temperature control units HB-THERM SERIES 3 HB - W140 - 6A
Power: 6.5 kW Was only used in laboratory environment and used very little. Excellent condition.
1992
BN 1,280 €
offer is possible  
  CH   89636544
11.05.2017
Temperature control units HB-THERM SERIE 3 HB - W140 - 6A
Power: 6.5 kW Was used only in laboratory environment and only rarely used. Excellent condition.
1992
BN 1,280 €
offer is possible  
  CH   89636536
11.05.2017
Granulate conveying devices HELIOS Oktomat Typ XL - 80 / 38
2007
BN 4,200 €
offer is possible  
  CH   88436886

3. machines for plastic:

301 injection moulding machines
302 extruders
303 blow moulding machines
304 thermoforming machines
305 peripheral equipment (e.g. heating,cooling,drying)
306 moulds
307 rubber machines
308 other machines for plastic
309 mills
310 spare parts for plastic machinery
 
all dynamic subcategories of the category machines for plastic (2 or more items)
(Plastic) Injection Moulders (3)
additional equipment (2)
air filtration system (2)
Angle conveyor belts (4)
AUTO BLISTER WELDING MACHINE (2)
AUTOCLAVE (7)
Auxiliary equipment (3)
BAG MAKING (3)
Bagmachine (3)
Banbury Internal Mixer (2)
barrel (5)
BLISTER HAND WELDING MACHINE (2)
Block Mold (3)
blow mould (3)
Blow Moulding Machine (3)
Blow moulding machines (20)
Blowing machines (3)
Blown film lines (4)
Calender lines (6)
Calenders (9)
calibration table (2)
Coating and printing plants (3)
Coextrusion plants (5)
Cold water sets (3)
Colouring equipment for granulate (2)
Column for presure (2)
Compounding line (8)
Control Unit for Injection Moulding Machine (10)
Conveying belts (2)
Conveyor Belts (2)
Coolant pump (3)
cooling compressor (2)
COOLING DE. (3)
Cooling mixers (2)
Cooling spry bath UNICOR (2)
cutting mill (12)
Cutting mill / granulator (2)
Cutting mills (20)
Cylinders (2)
Double Mitre Saw (2)
double screw extruder (2)
Double screw-type extruding machine (8)
Dry Air Generator (5)
drying hopper (2)
Drying Oven (2)
Eckputzmaschine Corner (2)
ELBA BAG MAKING MACHINE (4)
Embossing Calender (2)
Embossing machines (4)
EPS Blockmould (2)
EPS Cutting Line (2)
Extruder (6)
Extruder Line (3)
Extruders (21)
Extruding lines (6)
Extruding lines for pipes (3)
Extrusion blow molding machines (3)
FILM EXTRUSION LINES BLOWN FILM (3)
film lines (3)
filter housing (11)
Fine grinding mills (2)
Flat foil extrusion installations (2)
Glass Frame Saw (2)
Granulat converyor equipment (8)
GRANULAT DRYER (2)
Granulate conveying devices (5)
Granulate dryers (2)
Granulate drying unit (24)
Granulate pigment mixing unit (3)
granulating lines (3)
Granulating mills (5)
Granulating plants (7)
Granulator (30)
Granules loader (2)
Grinder (3)
GUILLOTINE – SHEARS (2)
Haul Off (4)
High pressure compressor (2)
horizontal conveyor (5)
horizontal to incline conveyor (5)
Hot runner controllers (4)
Hydraulic Injection Moulding Machine (6)
Hydraulic Moulding Press (4)
INJECTION MOLDING MACHINE (21)
Injection molding machine - vertical (3)
Injection Molding Machine for PET Preforms (2)
Injection molding machine over 5000 KN (6)
Injection molding machine up to 1000 KN (18)
Injection molding machine up to 5000 KN (11)
Injection molding machines (190)
Injection molding machines - Special (2)
Injection Moulding Machine (64)
Injection moulding tools (2)
Injection moulds (8)
Internal mixer for rubber (2)
IPS Strand drying SA 150 (2)
Laboratory Mill (2)
Laboratory rolling mills (2)
layer foil blowing plants (2)
Linear robots (6)
LUnité Hermétique Refrigeration Unit TFH4540Z HR (3)
Machine-side mills (3)
Mill (5)
Milling Centre (2)
MIXER (6)
Moog valve (2)
mould (3)
Moulds for plant pots / Planters (3)
Multi component injection moulding machines (2)
nh3 plant (3)
Other equipment (3)
parts-removal robot (3)
pelletizer (9)
PET Preforming machines (17)
PET small dryer line (2)
PET Stretching blowing machines (32)
pipes - and profiles (2)
Planetary Mixer (2)
Plastic injection machines (53)
point butt welding machine (2)
Preform Injection machine (2)
Press (8)
pressure filter with heating and agitator (2)
Profile extrusion lines (4)
Profile extrusion lines and extrusion plants (3)
Pulverizer (3)
Pulverizers (2)
Refrigerating machines (4)
Refrigeration machine (8)
Repelletising plants (3)
ROBOT (2)
Robots (2)
Rolling mills (15)
Rotary compression machine (3)
Rubber Extruder (2)
Rubber extruders (9)
Rubber injection presses (6)
Rubber Internal Mixer (5)
RUBBER MILL (4)
Rubber processing machines (4)
Rubber testing devices (2)
Sheet Forming Machines (2)
Single head welding machine (2)
Single screw extruder (3)
Single screw-type extruding machine (6)
Single station machines (4)
Single-screw extruder (4)
Spare parts (8)
Special injection moulding machines (2)
srew (6)
srew and barrel complete (27)
storage containers (2)
Strainer (Extruder) (2)
switch cabinet (3)
tank (b 4012) (2)
TEMP. CONTR U (4)
Temperature control unit (8)
Temperature control units (11)
temperature controller (3)
Thermo forming machines (17)
Thermoforming Machine (4)
tilting table for profiles (2)
twin screw extruder (8)
Twin-Screw extruder (3)
Two Head Welding Machine (2)
Type: 0,5ltr. blow mould (3)
Type: 1775x2-12mm sheet die (2)
Type: 200mm PVC profile line (3)
Type: 2200x2-12mm sheet die (2)
Type: 240mm PVC profile line (3)
Type: 2ltr. blow mould (2)
Type: airdryer (4)
Type: blow moulding machine (5)
Type: chiller (3)
Type: compounding extruder (3)
Type: compounding line (11)
Type: compressor (2)
Type: compressor 40 bar (2)
Type: conical twin screw extruder (2)
Type: dryer (7)
Type: drying funnel (9)
Type: granulator (2)
Type: grinder (2)
Type: hot face cutter (3)
Type: injection moulding machine (16)
Type: melting pump (4)
Type: pelletizer (2)
Type: pelletizing line (5)
Type: PET injection moulding machine (3)
Type: PET machine (2)
Type: PET mould for Tetra Pak DBX 6/LX 6 6 cavitie (4)
Type: PET stretch blow moulder (9)
Type: PET stretch blow moulding machine (4)
Type: PET-dryer (6)
Type: PET-stretch blow moulding machine (6)
Type: profile line downstream (2)
Type: PVC pelletizing line (3)
Type: PVC twin screw extruder (3)
Type: sheet grinder (2)
Type: single screw extruder (14)
Type: twin screw extruder (7)
Type: twinscrew extruder (2)
Type: water cooling unit (4)
uninterruptible power supply (2)
Unlubricated air dryer (17)
UTECO GOLD 612 (2)
UTECO GOLD 612 RR (3)
Vacuum-forming machines (2)
valve (2)
WATER COOLING UNIT (3)
Water slot machine (2)
Wing assembly station (2)
Zweikopfschweissmaschine (2)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Start