other metal working machines used for sale

Inv. Num. : 7490 Type: Roundscan 555 Producer: Hommel Generated: Parameters: Maximum workpiece weight: 60 kg Maximum measurable diameter: 430 mm Maximum measurable height: 550 mm Table diameter: 330 mm

GeneralTravelling column machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal3000 mmCross1100 mmVertical1050 mmFeed drives:Feed rate X / Y / Z80000/80000/80000 mm/minRapid feed X / Y / Z80/80/80 m/minNC-swivel head (B-axis)Controlled NC-swivel milling head (B-axis) with clamping in position. Continuously positioning NC swivel milling head with integrated motor spindle for 4/5 axes positioning and simultaneous machining. Swivel torque: 3,300 / 2,300 Nm // 2,433 / 1,696 ftDynamic package for DMF 300|11 linearDynamic package for DMF 300|11 linear Linear motor X-axis with 80 m/min // 262.48 ft/min Rapid speed XYZ 80 m/min // 262.48 ft/min Acceleration XYZ 8 m/s² // 26.25 ft/s² Active cooling for Linear motorPackage Mill / Turn 12,000 rpm, HSK-A100Package Mill / Turn, 12,000 rpm HSK-A100 (Only available for Siemens 840D solutionline) NC-Mill-Turn-table d 1,050 ...

Inv. Num. : 7501 Type: PNR 92 Producer: EGO a.s Created: 1995 Parameters: Number of shelves: 34 pieces Power consumption: 5 kW

General2-Turret Shaft Lathe; Control: Control F32iB CharacteristicsMax machining diameter120 mmDimensions (L x W x H)1,65 x 1,67 x 1,5 mDrive power main spindle5,5/3,7/3,7 kWRapid feed X / Z20 / 30 m/minMovements X / Z60 / 580 mmLower Turret6 PositionsRapid feed X / Z20 / 30 m/minMovements X / Z60 / 580 mmUpper Turret6 PositionsSpeed max.-3500 rpmMax. Turning Length535 mmWeight approx.3000 KgTailstock spindle travel check (4 positions)Tailstock Spindle Travel Check (4 Positions) The tailstock spindle stroke range can be detected by connecting the tailstock spindle and air cylinder with scale function.Foot switch for tailstockFoot switch for tailstock The tailstock spindle is moved in and out with a foot switch.Coolant gunCoolant Gun The magnet type coolant gun is attached to the machine front. Pressing the coolant gun button on the operation panel activates the coolant pump, and depre ...

Inv. Num. : 7512 Type: H 30 BU Producer: SCHENCK Created: 1994 Parameters: Maximum load capacity: 700 kg Max. speed: 2300 1/min Maximum distance between tailstock tips: 1330 mm

General2-Turret Shaft Lathe; Control: Control F32iB CharacteristicsMax machining diameter120 mmDimensions (L x W x H)1,65 x 1,67 x 1,5 mDrive power main spindle5,5/3,7/3,7 kWRapid feed X / Z20 / 30 m/minMovements X / Z60 / 580 mmLower Turret6 PositionsRapid feed X / Z20 / 30 m/minMovements X / Z60 / 580 mmUpper Turret6 PositionsSpeed max.-3500 rpmMax. Turning Length535 mmWeight approx.3000 KgTailstock spindle travel check (4 positions)Tailstock Spindle Travel Check (4 Positions) The tailstock spindle stroke range can be detected by connecting the tailstock spindle and air cylinder with scale function.Foot switch for tailstockFoot switch for tailstock The tailstock spindle is moved in and out with a foot switch.Coolant gunCoolant Gun The magnet type coolant gun is attached to the machine front. Pressing the coolant gun button on the operation panel activates the coolant pump, and depre ...

Inv. Num. : 7402 Type: Euroμ Producer: Mora Created: 2015 Parameters: Software: Metrosoft Quartis Geo Axis X: 600 mm Axis Y: 1000 mm Z axis: 400 mm Number of axles: 3 Equipment: Computer Control panel Renishaw PH10M motorized turret Renishaw PH10M Measuring Probe Renishaw TP200 Probe 2019: Overhaul of the drives

GeneralTwo spindle turning centre with - partial hollow clamping device for main spindle and counter spindle internal diameter of draw tube Ø67 mm (2.63 in) x 700 mm (27.55 in) deep - 2 C-axes and spindle brakes (hydr.) - 2 12 fold Sauter star turrets reception VDI 40, DIN 69880-40 with precision interface (Trifix) and tool drive connection/drive acc. DIN 5480 - Y-axis, slide I - Counter spindle slide with NC-cross stroke and tailstock; Control: CELOS with Siemens 840D sl Operate Headstock, leftClamping chuck Ø315 mmSpindle nose diameter170h5 mmSpindle diametre on front bearing130 mmSpindle bore87 mmDrive power (100% DC)25 kWTorque (100% DC)280 NmC-Axis Speed2000 rpmSpeed range0-5000 rpmHeadstock, rightClamping chuck Ø315 mmSpindle bore87 mmSpindle nose diameter170h5 mmSpindle diametre on front bearing130 mmDrive power (100% DC)25 kWC-Axis Speed2000 rpmTorque (100% ...

Inv. Num. : 7155 Type: UR4-4DD-UF6 Producer: HMP Created: 2000 Parameters: Max. diameter: 25 mm Components: Reducing hammers with 4 segments 6-segment roll forming hammers

Generalin travelling column construction NEW DMG MORI Design swivel head (B-axis) speed range 20 up to 10,000 rpm motor spindle with 52/42 kW (40/100%DC) tool taper HSK-A100 DIN 69893 tool clamping according to DIN 69872; Control: CELOS with Siemens 840D sl Operate Working area 1Cross1100 mmLongitudinal2600 mmVertical900 mmTechnical DataFeed rate longitudinal/transverse/vertical80000/80000/80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight12 KgMax. tool length500 mmMax. tool diameter with occupied adjacent pockets115 mmMax. tool dia. with free neighbouring pockets160 mmDirect measuring systemDirect path measuring systemCabineFull protection cabinDynamic package for DMF 260 linear (Y1100)Dynamic package for DMF 260 linear (Y1,100 mm) linear drive X-axis with 80 m/min  ...

Inv. Num. : 4567 Type: 300-50 Producer: DEMAT Created: 2016 Parameters: Power consumption: 4.5 kVA Control cabinet / socket cover: IP 54 / IP 44 Length of conveyor: 2400 mm Conveying speed: 2 m/min Belt width: 250 mm Coil window size: 320 x 320 mm Weight: 180 kg

GeneralTravelling column machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal3000 mmCross1100 mmVertical1050 mmFeed drives:Feed rate X / Y / Z42000/42000/42000 mm/minRapid feed X / Y / Z42/42/42 m/minNC-swivel head (B-axis)Controlled NC-swivel milling head (B-axis) with clamping in position. Continuously positioning NC swivel milling head with integrated motor spindle for 4/5 axes positioning and simultaneous machining. Swivel torque: 3,300 / 2,300 Nm // 2,433 / 1,696 ftCabineFull protection cabinSpindle speed 15,000 rpm, 200NmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle)Rigid table with integrated rotary axis (leftside)Rigid table with integrated round table Ø 1050 mm // 41.3 in located left side of table table load max. 1,200 ...

Inv. Num. : 4634 Type: Producer: GOUDSMIT Created: 2015 Parameters: Magnetic field strength in the middle of coil H: 28 A Power: 11200 VA Weight: 370 kg

Generalin travelling column construction NEW DMG MORI Design swivel head (B-axis) tool clamping according to DIN 69872; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal2600 mmCross1100 mmVertical900 mmTechnical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical80/60/60 m/minTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight15 KgMax. tool length500 mmMax. tool diameter with occupied adjacent pockets115 mmMax. tool dia. with free neighbouring pockets160 mmDirect measuring systemDirect path measuring systemCabineFull protection cabinDynamic package for DMF 260 linear (Y1100)Dynamic package for DMF 260 linear (Y1,100 mm) linear drive X-axis with 80 m/min // 262.48 ft/min rapid move XYZ 80/60/60 m/min // 262.48/196.86 ft/min, Acceleration XYZ 5/6/6 m/s² / ...

Inv. Num. : 5122 Type: Tornado Producer: BMF Created: 2018 Parameters: Hours: 2964 h Switch-on hours: 1485 h Throwing wheel: 231 h Max. workpiece diameter: 250 mm Maximum filling volume: 30 l Throw wheel force: 2.2 kW Maximum spindle speed: 9000 1/min Quantity: 12-15 pieces Maximum workpiece weight: 90 kg Machine dimensions: 1500x1500x2000 mm Weight: 900 kg Equipment: Filter system with separation Universal Tool Holder 14 positions of planetary gears Components - Impellers

Generalin travelling column construction NEW DMG MORI Design swivel head (B-axis) tool clamping according to DIN 69872; Control: CELOS with Heidenhain TNC 640 Working area 1Longitudinal2600 mmCross1100 mmVertical900 mmTechnical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical80/60/60 m/minTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight15 KgMax. tool length500 mmMax. tool diameter with occupied adjacent pockets115 mmMax. tool dia. with free neighbouring pockets160 mmDirect measuring systemDirect path measuring systemCabineFull protection cabinDynamic package for DMF 260 linear (Y1100)Dynamic package for DMF 260 linear (Y1,100 mm) linear drive X-axis with 80 m/min // 262.48 ft/min rapid move XYZ 80/60/60 m/min // 262.48/196.86 ft/min, Acceleration XYZ 5/6/6 m/s² // 16. ...

Inv. Num. : 7171 Type: TZB 1-5.5/700 Producer: Kovo Staněk Generated: Parameters: Max. workpiece diameter: 345 mm Maximum filling volume: 165 dm³ Throw wheel force: 7.5 kW Blasting chamber internal dimensions: 720 x 800 mm Maximum load: 350 kg Max. weight of the part: 15 kg

Description: Serial number: 150013270 Operating voltage: 220 - 230 V Frequency: 50 Hz Connection: 0.71 kW Rated current: 10 AApprox. Onsite Dimension. (l x w x h): 700 x 480 x 800 mm, weight approx.: 80 kg

Inv. Num. : 7154 Type: SPV Producer: Bongard Created: 1981 Parameters: Wire diameter: 6.5 mm Maximum coil weight: 1000 kg Inner diameter: 520 mm Outer diameter: 970 mm Maximum speed: 0-4 m/s Weight: 2500 kg

Description: Manufacturer number: 42099 Operating voltage: 230 V Frequency: 50 Hz Connection: 18 kW Rated current: 0.2 A Filling capacity: 50 Lweight approx.: 60 kg, Approx. Onsite Dimension. (l x w x h): 630 x 600 x 1,200 mm

Inv. Num. : 1608 Type: MM6-2.5-1.5 Producer: DYNOBEND B.V Created: 2011 Parameters: Specifications: • Measuring range L 6000 x W 2500 x H 1500mm (2500mm is 1250 on both sides of the rail) • Measuring time 6 mtr. 1 min • Calculation time data: 1 min • Machine weight +/- 500kg • Windows XP control incl. PC • Rommer Arm • Control computer Documentation: • Electrical circuit diagrams in paper form and CD • Spare parts list in paper form and CD • Maintenance instructions in paper form and CD • Cleaning instructions in paper form and CD • Instruction manual in paper form CD and "Help" Machine Requirement: • The machine is equipped with a connection • The IP address is available

Description: Machine number: 310060 Power requirement: 30 kW Permissible operating pressure: 10 bar Delivery rate: 4010 L/minApprox. Onsite Dimension. (l x w x h): 1,400 x 800 x 1,300 mm, weight approx.: 500 kg

Inv. Num. : 4368 Type: Comact Scan 2M Producer: ATOS Created: 2013 Parameters: Software: ATOS v7.5 Stack height: 1.8 mm Machine arm: 0.9 mm Swivel head: Foba Superball M-1 Notebook: Dell Precision M4700 Equipment: 1x Silver License Key 1x Remote Control 1x original notebook 1x bag with PC 1x Stand 2x Suitcase 3x Folders

Description: Gas connection, maximum temperature 1500°, serial number 27093 Opening dimensions 550 × 500 mm, depth approx. 630 mmApprox. Onsite Dimension. (l x w x h): 1,200 x 1,600 x 2,500 mm, weight approx.: 760 kg

Inv. Num. : 5360 Type: MS 48 Sp Producer: HS Created: 2008 Parameters: Maximum sheet plate width: 1000 mm Maximum blade weight: 1300 kg Roll diameter: 148-156 mm Coil: 1020 mm Machine weight: 700 kg Equipment: Electrical control panel with control

Description: Serial number: 866070619 Operating voltage: 400 V Frequency: 50 Hz Connection: 16.3 kW Rated current: 31.8 Aweight approx.: 150 kg, Approx. Onsite Dimension. (l x w x h): 780 x 750 x 1,600 mm

Inv. Num. : 4010 Type: RM1 Producer: P/A INDUSTRIES GmbH Created: 2014 Parameters: Maximum sheet plate width: 675 mm Maximum sheet thickness: 1 mm Maximum product length: 10 m Line speed: 50 m/s Al Strip of Thickness: 0 25-0 4 mm

Description: Serial number: G100329 Table dimensions: 1570 x 910 mm Measurement range: 1000 x 600 mm Including calibration ball and a probe from the manufacturer RENISHAW Converted to WENZEL in 2008 Software: CM2015 Capability to measure surface forms, curvesweight approx.: 1,000 kg, Approx. Onsite Dimension. (l x w x h): 2,200 x 1,900 x 2,300 mm

Inv. Num. : 4906 Type: Poli Galaxy SL4 Producer: Wenzel Created: 1996, GO Parameters: Axis X: 1200 mm Axis Y: 1500 mm Z axis: 700 mm Control system: Metrosoft CM 3.9 Sensor head: PH10M Sensor Type: TP20 Touch the diameter: 6 mm Touch length: 25 mm Software: WPC 2010 Machine dimensions: 2700x2200x2900 mm Weight: 4 t Last calibration: 14.12.2018

Description: Machine number: 1009729 Operating voltage: 400 V Frequency: 50 Hz Power requirement: 30 kW Delivery rate: 4810 L/min Permissible operating overpressure: 10 barApprox. Onsite Dimension. (l x w x h): 1,400 x 800 x 1,300 mm, weight approx.: 500 kg