We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Manufacturer:
(Category: 102)
used
General: Year of construction 2007 Control Siemens 840D Power Line ShopTurn Travel X 166.5 mm Z 339 mm Switch-on hours 3,670 h Spindle hours 787 h Spindle: Spindle speed 6,000 rpm Spindle bore 56 mm Power 7.5 kW 72 Nm Circulation over bed 380 mm Tailstock: Stroke 370 mm Quill MK3 Revolver: Number of stations 12-fold Number of driven tools 6 Tool holder VDI30 Dimensions and weight: Dimensions: 2,885 x 1,720 x 1,670 mm Weight approx. 4,200 kg Other equipment and accessories: Tool Measuring Arm C-axis 0.04°
new
turning diameter over bed: 500 mmturning diameter over slide rest: 300 mmturning length: 1000 mmturning diameter in the gap: 710 mmturning speeds: 36 - 1600 U/mincentre height: 250 mmspindle bore: 103 mmtailstock quill taper MT: 5 MKtailstock travel: 150 mmtailstock quill diameter: 75 mmtotal power requirement: 7,5 kWweight of the machine ca.: 2,75 tdimensions of the machine ca.: 2,5 x 1,1 x 1,4 mCenter lathe with- 3-jaw chuck F 315- Fixed tailstock top- Multifix holder- 2-axis digital display- Fixed Lynette 180 mm- Coolant system- rapid traverseThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Key data: 380 mm, 280 mm, 130 mm
Vest bezel range 200-380mm incl pins with rollers
new
turning diameter over bed: 360 mmturning diameter over slide rest: 220 mmturning length: 1000 mmturning diameter in the gap: 506 mmturning speeds: 45 - 1800 U/mincentre height: 180 mmspindle bore: 38 mmtailstock quill taper MT: 3 total power requirement: 2,4 kWweight of the machine ca.: 0,9 tdimensions of the machine ca.: 1,9 x 0,8 x 1,2 mCenter lathe with- 3-jaw chuck F 315- Fixed tailstock top- Multifix holder- 2-axis digital display- Fixed Lynette 180 mm- Coolant system- rapid traverseThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Diameter: 630 mm. The 4-jaw mini lathe chuck body is made of cast iron, Bayonet cone 8.
used
turning diameter over bed: 400 mmturning diameter over slide rest: 200 mmturning length: 1500 mmturning diameter in the gap: mmturning speeds: 28 - 1400 U/mincentre height: 200 mmspindle bore: 50 mmtotal power requirement: 10,4 kWweight of the machine ca.: 2,85 tdimensions of the machine ca.: 3,5 x 1,4 x 1,6 mCenter lathe- Rapid traverse- Faceplate 400mm- Multifix steel holder- Coolant system- Feed protection- chip trays- Chip protection wall- Emergency stop facility- Machine lightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Göltebodt quick-change holder 21 x 300107 € 100,-- 3 x 300114 € 100,-- 1 x 300125 € 150,-- 1 x 300105 € 75,--
used
turning diameter over bed: 500 mmturning diameter over slide rest: 250 mmturning length: 1200 mmturning diameter in the gap: mmturning speeds: 7,1 - 1400 U/mincentre height: 250 mmspindle bore: 49 mmtotal power requirement: 7,5 kWweight of the machine ca.: 3,9 tdimensions of the machine ca.: 2,85 x 1,3 x 1,6 mLead and feed spindle lathe- 3-jaw chuck 260mm- 4-fold steel holder- Coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Clamping claw box made of solid steel GR 9 (new) 4 pieces
new
turning diameter over bed: 250 mmturning diameter over slide rest: 130 mmturning length: 550 mmturning speeds: 50 - 2000 U/mincentre height: 125 mmspindle bore: 20 mmtailstock quill taper MT: 2 tailstock quill stroke: 60 mmmetric threading: 0,4 - 3,0 mmthread - inch: 10 - 44 TPIthread - module: 0,2 - 12,5 mmconnected load frequency: 230 Vtotal power requirement: 1,0 kWweight of the machine ca.: 0,12 tdimensions of the machine ca.: 1,09 x 0,59 x 0,45 mEquipped with- 20 mm spindle passage- adjustable guideways- Powerful 1.0 kW motor- continuously variable speedScope of delivery:- 3-jaw chuck 100 mm,- 4-jaw faceplate chuck 125mm- standing and rotating bezel- Splash guard- Feed protectionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
- Max. Machining Dia. 2630 mm - table dia. 2000 mm - machining height under cross rail 1500 mm - Workpiece weight 12,000 kg - plate speed 1 -140 rpm - right working support (turret) vertical travel (Z axis) 760 mm - left working support vertical travel (Z axis) 1200 mm - Working feed range 0.05-5 mm/red. - machine weight 36 tons Siemens Control SINUMERIK
new
turning diameter over bed: 470 mmturning diameter over slide rest: 300 mmturning length: 1000 mmspindle bore: 58 mmturning speeds: 20-2000 U/mintotal power requirement: 5,5 kWweight of the machine ca.: 1800 tdimensions of the machine ca.: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Lead and Pull Screw Lathe VOEST DA300 Year of construction ca 1980 Turning diameter over bed 600mm Effective turning length: 1850 mm Spindle Passage: 85mm Speeds: 14 - 1000 rpm Tailstock: MK5 Reversal backlash face spindle: 0.5 mm Reversal clearance upper slide: 0.25 mm Rapid traverse bed sledge: in both directions EQUIPMENT - Multifix C - 5 steel brackets - Rotating center tip MK4 - 4 jaw chucks Ø 400mm, plus 3 sets of jaws - 3 jaw chucks Ø 400mm - 3 sets of jaws - Both linings Röhm - Fixed bezel The machine is in good condition. The machine bed is in very good condition.
used
turning diameter over bed: 400 mmturning diameter over slide rest: 220 mmturning length: 1000 mmturning diameter in the gap: mmturning speeds: 31,5 - 1400 U/mincentre height: 205 mmspindle bore: 50 mmtotal power requirement: 5,0 kWweight of the machine ca.: 1,4 tdimensions of the machine ca.: 2,5 x 1,2 x 1,7 mCenter lathe- 3-jaw chuck 210mm- Multifix steel holder- Coolant pump- Chip protection wall- chip tray- Machine lightThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Key data: 210 mm, 400 mm
Okuma LT 2000 EX 2T 2M 2Y Big Bore Steuerung/ Control : OSP P 200 L , kein IGF One Touch Advance Year of manufacture / YOM : 09/ 2011 Power On : approx. 13000 [h] Spindle running time : [h] : Location: Availability /: from stock Sweden Condition / technical condition : 9 / 10 TECHNISCHE DATEN / TECHNICAL DATA: Max. turning length / max turning length : [mm] 700 Hauptspindel / Main Spindle Turning dia : [mm] 210 Max. turning dia over bed : [mm] 400 max. RPM/ spindle speed : [1/min.] 6000 Spindle bore / spindle bore : [mm] full clamping cylinder Drive power / spindle power : [kW] 22/15 max. rotation speed 6000 rpm Travel XA / XB axis : 205 mm Travel ZA / ZB axis : 700 mm Travel W axis : 730 mm Travel YA / axis : 95 mm Travel YB / axle : 95 mm C-axis : 2 x 0.001 degrees/degree Counter spindle / subspindle max. speed/ spindle speed : [1/min.] 6000 S ...
used
turning diameter over bed: 410 mmturning diameter over slide rest: 210 mmturning length: 1500 mmturning diameter in the gap: mmturning speeds: 11 - 2240 U/mincentre height: 205 mmspindle bore: 80 mmtotal power requirement: 7,5 kWweight of the machine ca.: 2,1 tdimensions of the machine ca.: 3,3 x 1,4 x 1,8 mCenter Lathe- Fagor digital display- Röhm 3-jaw chuck 250mm- Multifix steel holder with 4 cassettes- Coolant system- Machine light- Feed protection- Chip protection wall- chip tray- Emergency stop facilityThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Key data: 340 mm, 950 mm
Okuma LU3000 EX-MY 2SC 950 BigBore Year of construction : 08/ 2014 Control : OSP P 300 L Suite Power on : approx. 300 h Spindle run : approx. 100 h Specifications Rotation range up to Ø [mm] 340 Vibration diameter over cross slide / bed [mm] 340/580 Travel X-axis tool carrier "A" [mm] 260 Y-axis travel tool carrier "A" [mm] 120 (+70/-50) Z-axis tool carrier travel "A" [mm] 630 1.030 Travel X-axis tool carrier "B" [mm] 160 Z-axis tool carrier travel "B" [mm] 615 1.015 Spindle: Main spindle - speed [1/min] 42-4200 Main spindle - power [kW] 22 Main spindle - torque [Nm] 427 Main spindle - bore Ø [mm] 80 Main Spindle - Nose A2-8 Feed: Rapid traverse X/Y/Z - axes [m/min] 25/15/30 Rapid traverse C - axis [1/min] 200 Working feed X/Z - axes [mm/rev] 0.001-1.000 Tool carrier "A": Tool system BMT 60 Okuma Tool Slots [pcs] 12 Driven Tools [pcs] 12 Driven tools - sp ...
new
turning diameter over bed: 660 mmturning diameter over slide rest: 420 mmturning length: 2000 mmturning diameter in the gap: 840 mmturning speeds: 36 - 1600 U/mincentre height: 330 mmspindle bore: 103 mmtailstock quill taper MT: 5 MKtailstock travel: 150 mmtailstock quill diameter: 75 mmtotal power requirement: 11 kWweight of the machine ca.: 3,2 tdimensions of the machine ca.: 3,6 x 1,1 x 1,45 mCenter lathe with- 3-jaw chuck F 315- Fixed tailstock top- Multifix holder- 2-axis digital display- Fixed Lynette 180 mm- Coolant system- rapid traverseThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Control Heidenhain CNC Pilot 640 Rotational diameter. [mm] 450 Turning length [mm] 800 Main Spindle: Motor Spindle Technology Speed 5,000 rpm Power (max.) 34 kW Torque (max.) 380 Nm Bar passage 65 mm Workpiece clamping Hainbuch CentroteX with B-TOP 165-43 Counter spindle: Motor Spindle Technology Speed 5,000 rpm Power (max.) 32 kW Torque (max.) 360 Nm Bar passage 65 mm Workpiece clamping I 3-jaw chuck, Schunk ROTA THWplus 215-66 Workpiece Clamping II Differential Compressive Stress Travel in Z 800 mm Tool carrier I (X/Y/Z): Technology turret with 16 stations Tool holder VDI 30 Tool drive 6,000 rpm, 10 kW, 32 Nm Travel in X/Y/Z 300/120/800 mm Rapid traverse in X/Y/Z 30/22.5/30 m/min Equipment/Accessories: Direct displacement measuring system (glass scale) in X Chip Management Chip Conveyor Coolant management IKZ system with paper belt filter and high pr ...
new
turning diameter over bed: 360 mmturning diameter over slide rest: 220 mmturning length: 1000 mmturning diameter in the gap: 380 mmturning speeds: 70 - 2000 U/mincentre height: 180 mmspindle bore: 50 mmtailstock quill taper MT: 3 MKconnected load frequency: 230 Vtotal power requirement: 1,8 kWweight of the machine ca.: 0.65 tdimensions of the machine ca.: 2,0 x 0,8 x 1,56 m3-axis digital display3-jaw chuck 200 mm.4-jaw chuck 200 mm.Faceplate 320mmbezel fixedrunning bezel4-fold steel holder.Halogen machine lightmachine lightfoot brakeremovable chip tray, chip protection wallHardened and ground bed tracksComplete coolant systemlining protectionmachine toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
-Peak height 240mm -Peak width 1000mm -Control Siemens -Circular permes.about bed 490mm -Umlaufdurchmes.ü.Planschlitten 195mm -Crumpling 520mm -Spindeldurchmes.im in front. Bearing 100mm -Spindle bore 63mm -Torque 736Nm
new
turning diameter over bed: 560 mmturning diameter over slide rest: 355 mmturning length: 2000 mmturning diameter in the gap: 790 mmturning speeds: 20 - 1800 U/mincentre height: 380 mmspindle bore: 80 mmtailstock quill taper MT: 2,8 MKtailstock travel: 150 mmtailstock quill diameter: 75 mmtotal power requirement: 5,5 kWweight of the machine ca.: 3,4 tdimensions of the machine ca.: 3,5 x 1,15 x 1,3 m• 80 mm spindle passage• Gears hardened and ground• manual central lubrication• adjustable main spindle bearings• Overload clutch in the lock case• bed bridge• incl. 3 - axis digital displayThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Ladies and gentlemen, below we offer the following machine for sale: from a tool making, single-layer run and very well maintained. Still under power. CNC lathe Voest - Alpin - Weipert WNE 490 X 1000, peak height 240mm, tip width 1000mm, control Siemens, circulating through mes.over bed 490mm, circulating permes.via plan slide 195mm, crimping 520mm, Spindeldurchmes.im front. Bearing 100mm, spindle bore 63mm, torque 736Nm.
used
turning diameter over bed: 520 mmturning diameter over slide rest: 270 mmcentre distance: 1500 mmturning dia. in gap: 780 mmturning speeds: 14 - 1800 U/minspindle passage: 62 mmtotal power requirement: 11,0 kVAweight of the machine ca.: 3,1 tdimensions of the machine ca.: 3,5 x 1,2 x 1,4 mFurnishing:- Feed in the overslide- with Forkardt jaw chuck F250- Multifix steel holder- Emergency stop facility- Coolant pumpThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Cam controlled multi spindle automatic lathe, used 6 main spindles, control: Siemens S5 PLC, electronical trip dog control type „Balluff gear box for thread milling (2 pieces) pick up for rear machining in pos. 6, work piece sorting shute, barloader: IEMCA-PRA 40/33 P -rack type- coolant pump, threading clutches, stock stand and reel, tooling: could be different like pictures partly revised
new
turning diameter over bed: 400 mmturning diameter over slide rest: 264 mmturning length: 1000 mmturning diameter in the gap: 550 mmturning speeds: 44 - 2000 U/mincentre height: 200 mmspindle bore: 52 mmtailstock quill taper MT: 4 MKconnected load frequency: 400 Vtotal power requirement: 1,5 / 2,4 kWweight of the machine ca.: 0,9 tdimensions of the machine ca.: 1,9 x 0,8 x 1,56 m3-axis digital display3-jaw chuck 200 mm.4-jaw chuck 200 mm.Faceplate 320mmbezel fixedrunning bezel4-fold steel holder.Halogen machine lightmachine lightfoot brakeremovable chip tray, chip protection wallHardened and ground bed tracksComplete coolant systemlining protectionmachine toolsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
8 main spindles, Chucker AFH130 for complete machining means front- and back side, Control Siemens Sinumerik 840DI, complete revising and new configuration of this machine in year 2010, loading arm, for loading and disloading, Workpiece turn around station in pos. 4 , position 4 with workpiece length control, CNC compound slide in pos. 5, coolant pump with magnet candle filter, tooling: could be different like pictures option: Ergomat TB42 fot cutting off for half finnishing with FMB-Turbo
new
turning diameter over bed: 250 mmturning diameter over slide rest: 145 mmturning length: 550 mmturning speeds: 50 - 2000 U/mincentre height: 125 mmspindle bore: 26 mmtailstock quill taper MT: 2 MKconnected load frequency: 230 Vtotal power requirement: 0,75 kWweight of the machine ca.: 0,12 tdimensions of the machine ca.: 1,3 x 0,65 x 0,6 m3-axis LCD digital display systemlongitudinal feed.3-jaw chuck 125 mm.4-way steel holder.chip tray, bulkheadHardened bed tracks.Emergency stop switch.lining protectionTool box, instruction manual.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Inv. Num. : 7055 Type: MULTIPLEX 6100 Producer: MAZAK Created: 2006 Parameters: Control system: MAZATROL 640 T Duty cycle: 99006 h Maximum turning length: 700 mm Max. turning diameter: 230 mm Maximum spindle speed: 6000 1/min Spindle power: 7.5 kW Clamping diameter: 6 mm Rod diameter: 51 mm Travel X: 200 mm Travel Z: 365/420 mm Length: 3000 mm Width: 1650 mm Height: 2090 mm Weight: 6400 kg Equipment: Owner
new
turning diameter over bed: 250 mmturning diameter over slide rest: 145 mmturning length: 550 mmturning speeds: 50 - 2000 U/mincentre height: 125 mmspindle bore: 26 mmtailstock quill taper MT: 2 MKconnected load frequency: 230 Vbore capacity in steel: 16 mmthroat: 169 mmquill stroke: 50 mmturning speed range - drilling: 50 - 2250 U/minspindle drive: 0,5 kWtotal power requirement: 0,75 kWweight of the machine ca.: 0,175 tdimensions of the machine ca.: 1,3 x 0,65 x 1,3 m3-axis LCD digital display systemlongitudinal feed.3-jaw chuck 125 mm.4-way steel holder.chip tray, bulkheadHardened bed tracks.Emergency stop switch.lining protectionTool box, instruction manual.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.