1466 results

Category: 110 accessories for machine tools
New in: used
Price 840 €
Location: Land-de DE
Seller: Oeben Werkzeugmaschinen

Technical data: dimensions approx. (Lxwxh min. / max.) 250 x 140 x 80 mm mm Approximate weight per piece 13 kg 1 post consists of 12 items

Category: 110 accessories for machine tools
New in: used
Location: Land-ua UA
Seller: ERS MANAGEMENT LTD

(3500x4000mm) load 80 ton

Category: 110 accessories for machine tools
New in: used
Location: Land-de DE Heilsbronn
Seller: WINKLER Maschinenservice

Area approx. 700 x 400 mm. Hydraulic clamping. Kiepp-swivel rotary table.

Category: 110 accessories for machine tools
New in: used
Location: Land-nl NL Zevenbergen
Seller: Mamach Machinehandel BV

Pallet voor Mazak H 500-50n

Category: 110 accessories for machine tools
New in: used
Price 1.190 €
Location: Land-de DE
Seller: MPS Frank Müller

Used angle Dimensions: approx. 90 x 71 x 71 cm The shipping is free from stock WINS. Scope of delivery: as shown in the photos (only the angle of the plate) Delivery via shipping upon request. Contact person Mr. Mueller see also our over 200 more deals at. (Changes and errors in the technical data, information and prices and subject to prior sale!)

Category: 110 accessories for machine tools
New in: used
Location: Land-nl NL Zevenbergen
Seller: Mamach Machinehandel BV

Pallet for Mazak H 400 N

Category: 110 accessories for machine tools
New in: used
Location: Land-nl NL Zevenbergen
Seller: Mamach Machinehandel BV

Pallet for Mazak FH 880

Category: 110 accessories for machine tools
New in: used
Location: Land-nl NL Zevenbergen
Seller: Mamach Machinehandel BV

Pallet for Mazak FH 480

Category: 110 accessories for machine tools
New in: used
Location: Land-nl NL Zevenbergen
Seller: Mamach Machinehandel BV

Pallet for Mori Seiki MH 40

Category: 110 accessories for machine tools
New in: used
Location: Land-nl NL Zevenbergen
Seller: Mamach Machinehandel BV

Pallet for Mazak H 500-40N

Category: 110 accessories for machine tools
New in: used
Location: Land-de DE
Seller: Gewerbe Dmitri Perfilov

- 3000 ? 1500 - 15 pcs. - 4000 ? 2000 mm. - 3 pcs. - 2000 ? 1300 mm. - 8 pcs.

Category: 110 accessories for machine tools
New in: 1980
Price 5.000 USD
Location: Land-de DE
Seller: ISC Werkzeugmaschinen GmbH

Package sale; total approximately 2500 kg various accessories, clamping device, tool holders, lathe chucks, flanges, face plates , a.s.o.

Category: 110 accessories for machine tools
New in: used
Location: Land-de DE Erfurt
Seller: Oeben Werkzeugmaschinen

Dimensions (Lxwxh) 1000 x 800 x 630 mm

Category: 110 accessories for machine tools
New in: used
Location: Land-de DE Erfurt
Seller: Oeben Werkzeugmaschinen

Dimensions (Lxwxh) 900 x 580 x 630 good condition

Category: 110 accessories for machine tools
New in: used
Location: Land-de DE
Seller: WMH24

pallet size 1400x700 mm

Category: 110 accessories for machine tools
New in: used
Location: Land-de DE
Seller: WMH24

pallet size 700x700 mm

Category: 110 accessories for machine tools
New in: used
Location: Land-de DE Kassel
Seller: RUDOLF BANDMANN WERKZEUGMASCHINEN e.K.

gebr. horizontal rotary table make WALTER Model RT 320 HP no. 6068 for grade separation, manual drive with position indicator of VRZ 166 HEIDENHAIN Table Ã? 320 mm Table height 130 mm External dimensions: Width 600 mm Depth 600 mm Height 130 mm

Category: 110 accessories for machine tools
New in: used
Price 700 €
Location: Land-de DE Sonsbeck
Seller: AVC GmbH

1 piece is offered: Dividing head, rotary table Walter VTW 5 with Forkhardt three-jaw Chuck 250 mm Brand: Walter Type: VTR 5 mint condition, tested, ready for use Features: Forkhardt 3 - jaw Chuck 250 mm Passage hole 70 mm Horizontally or vertically can be used Tip height 210 mm Clipping of all 15° Weight 150 kg Shipping: free shipped from stock -for shipping costs within Germany and around the world please contact us -Picking up local

Category: 110 accessories for machine tools
New in: new
Location: Land-de DE
Seller: Reinhold Schmitt GmbH

expansion range 68 - 73 mm shaft diameter 68 mm expansion length 980 mm main pipe length 1.010 mm total length 1.295 mm height up to middle of shaft app. 400 mm paper coiling unit without motor. optional: Paper coiling unit with drive motor

Category: 110 accessories for machine tools
New in: used
Location: Land-si SI
Seller: EMOK d.o.o.

Bar loader. Max bar length 3m, max diameter 20 mm.

Category: 110 accessories for machine tools
New in: used
Location: Land-de DE
Seller: Erwin Knoll Import & Export

Dividing device with magnetic plate FA Fritz Roth Magnetic disk diameter 220 mm Depth 500 mm Width 500 mm Height 250 mm Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, available.  ...

Category: 110 accessories for machine tools
New in: used
Location: Land-de DE
Seller: Erwin Knoll Import & Export

SCHUNK 2 finger parallel grippers and Rotary unit new Parallel grippers: PFH 40-AS / 302041 Rotary unit: OSE-A34-4 / 354304 Good condition fully functional can be visited on site and tried out. Shipping abroad. Visit: Basically I would like to point out that the article may be viewed and tested under power to exclude misunderstandings, like before you buy. Please ask questions before you purchase to avoid ambiguity. For general questions or an appointment for a visit I am at the below telephone number, availabl ...

Category: 110 accessories for machine tools
New in: used
Price 800 €
Location: Land-de DE Sonsbeck
Seller: AVC GmbH

1 piece is offered: Four jaw shot, lathe Chuck, lathe - four jaw Chuck features: JAWS individually adjustable Diameter: 550mm Short taper mount: KK8 Bolt circle: 172, 5 mm Cone diameter: 139, 7 mm Shipping: free shipped from stock -for shipping costs within Germany and around the world please contact us -Picking up local

Category: 110 accessories for machine tools
New in: used
Location: Land-de DE
Seller: Schraag Werkzeugmaschinen GmbH

Jaw width 160 mm Jaw height 55 mm JAWS opening approx. 210 mm Weight approx. 50 kg

Category: 110 accessories for machine tools
New in: 2000
Location: Land-de DE Chemnitz
Seller: Norbert Gottwald Werkzeugmaschinen

NC controlled rotary table vertical Table diameter 320 mm maximum speed of the table plate: 22 min-1 max. axial load (incl. transport load): 15.000 N Max. radial load (incl. transport load): 20,000 N Max. Vertical transport load 300 kg max. Circular milling torque 650 nm Centre height 170 mm Height 305 mm Size base part 270 x 205 mm Weight 170 kg Type: Continuous round table with hydr. clamping (63 bar) vertical use direct measuring system HEIDENHAIN RON 285 C Reference point closer BALLUFF

Category: 110 accessories for machine tools
New in: used
Price 180 €
Location: Land-de DE Neuenrade
Seller: JES Maschinenservice GmbH

Gewindescheidapparatr is in good condition. To M20

Category: 110 accessories for machine tools
New in: used
Location: Land-at AT Götzis
Seller: SCHLEIF-TEC; Kunibert Müller GmbH

Claw jaw for blanks and saw parts. Only 2, 5mm loss of material. Length: 90, 125, 160, 200mm

Category: 110 accessories for machine tools
New in: used
Location: Land-at AT Götzis
Seller: SCHLEIF-TEC; Kunibert Müller GmbH

Claw jaw for blanks and saw parts. Only 2, 5mm loss of material. Length: 90, 125, 160, 200mm

Category: 110 accessories for machine tools
New in: used
Location: Land-at AT Götzis
Seller: SCHLEIF-TEC; Kunibert Müller GmbH

Claw jaw for blanks and saw parts. Only 2, 5mm loss of material. Length: 90, 125, 160, 200mm As for RÃ?HM + GRESSEL vices available.

Category: 110 accessories for machine tools
New in: 1999
Location: Land-nl NL Zevenbergen
Seller: Mamach Machinehandel BV

Short with magazine rod feeder capacity and type of rods: round rods 3-80 mm Length of rods (depending) 1325 mm Height of lathe centre line 700-1500 mm

Category: 110 accessories for machine tools
New in: used
Location: Land-de DE Nordhausen
Seller: Werkzeug und Röhrenprofi UG

Neuwertiger little used pneumatic cylinders. The machine in which the cylinder was fitted, has denied their existence only as a spare machine. For more information we are under the phone 01522/7450046 available.

Category: 110 accessories for machine tools
New in: used
Location: Land-de DE
Seller: Schraag Werkzeugmaschinen GmbH

with fixed hole pattern. Number of drill bit 13 Cutterhead diameter 270 mm Spindle mount MT 4 Weight 20 kg

Category: 110 accessories for machine tools
New in: used
Location: Land-de DE
Seller: Schraag Werkzeugmaschinen GmbH

1 almost good as new precision measuring, profile projector, measuring range x 200 mm, y 100 mm, with quick and fine adjustment in both axes. 1 MITUTOYO digital display for 2 axes.

Category: 110 accessories for machine tools
New in: used
Location: Land-de DE 87719 Mindelheim
Seller: Weber Werkzeugmaschinen GbR

Size Lxwxh: 59.5 x 59.5 x 96 cm Facilities: 6 drawers div. metal dividers for drawers

Category: 110 accessories for machine tools
New in: used
Location: Land-de DE 87719 Mindelheim
Seller: Weber Werkzeugmaschinen GbR

Number of drawers: 5 Size: 86 x 74 x 106 cm Facilities: div. metal dividers for drawers

Category: 110 accessories for machine tools
New in: 1994
Price 1.200 €
Location: Land-de DE
Seller: Czech Industrie Service

Year of construction: 1994 Type: 300 K-1 Weight: 300 kg incl. cooling The chip conveyor has been productive in use at a BAZ until the end; It is declared at the Knoll as the so-called "scratch band leader". All technical data are created according to our best knowledge and existing documents; Expressly reserved by mistake. The chip conveyor is already dismantled; Function is given; a visit can take place after consultation prior to purchase.

Category: 110 accessories for machine tools
New in: new
Location: Land-nl NL
Seller: Machimpex b.v.

Self-centering 4 jaw Chuck Diameter 500 mm Mount DIN 55027 8 Cast unused New price Euro 6.400,-- Now 50% off

Category: 110 accessories for machine tools
New in: new
Location: Land-nl NL
Seller: Machimpex b.v.

Various tool holder Multifix / h Type C New and used

Category: 110 accessories for machine tools
New in: new
Location: Land-nl NL
Seller: Machimpex b.v.

Various parathyroid Toolholders model WD 1

Category: 110 accessories for machine tools
New in: 2008
Location: Land-de DE
Seller: Andreas Zobel Werkzeugmaschinen

Bar feeder IEMCA - MAXIS 72N Type: Multi-rod feed Manufacturer: IEMCA Model: MAXIS - 72 N Year of construction: 2008

Category: 110 accessories for machine tools
New in: 2007
Location: Land-de DE Bischweier
Seller: Andreas Zobel Werkzeugmaschinen

bar loading magazine IEMCA master 880 MP 21 LL Manufacturer: IEMCA Model: Master 880 MP Type: 21 LL Year of manufacture: 2007

Category: 110 accessories for machine tools
New in: used
Location: Land-f F
Seller: HILGERT AG

Specifications: width 2000 mm height 1200 mm Depth of 850 mm

Category: 110 accessories for machine tools
New in: used
Location: Land-f F
Seller: HILGERT AG

Technical data: Height 300 mm Length 3.000 mm Width 1,500 mm

Category: 110 accessories for machine tools
New in: used
Location: Land-de DE
Seller: Schraag Werkzeugmaschinen GmbH

maufacturer probably WALTER; Get well, vertically and horizontally, with Vernier. can be rotated around 360 ° Grid pane all 10 ° Tip height 180 mm Bore diameter 40 mm Weight approx. 35 kg Accessories: 1 three - jaw Chuck RÖHM diameter 200 mm.

Category: 110 accessories for machine tools
New in: used
Price 700 €
Location: Land-de DE Rotthalmünster
Seller: Maschinen Stumpf GmbH

very good used holder with bracket for cover milling machine FP 5 so 5CC

Category: 110 accessories for machine tools
New in: used
Price 900 €
Location: Land-de DE Rotthalmünster
Seller: Maschinen Stumpf GmbH

fixed angle milling table size 1200 x 500 mm Top 5 grooves Gr. 16 Fixing page 405 x 705 4 mounting slots - slot distance 90 mm

Category: 110 accessories for machine tools
New in: used
Price 1.300 €
Location: Land-de DE Rotthalmünster
Seller: Maschinen Stumpf GmbH

COVER fine for cover milling machines No. 2021 1910 color: grey Inner cone d. spindle: Normk. 40 (SK 40 suit over Saegegewindesp.) Cover version) Quill voltage for collets up to 25 mm Vertical adjustment: 100 mm 23 standard speeds in the area v. 40 6300 RPM 6 spindle feed rates: 0.01; 0.02; 0.03, 0.04, 0.06; 0.12 mm / U Drilling head can be rotated to the 90 ° Weight: 58 kg Suitable for all cover machines (in the case of FP1 with pedestal) and for lid LKDB coordinates - ry. Cover order. fo ...

Category: 110 accessories for machine tools
New in: 1986
Location: Land-de DE
Seller: tuerer machinery brokers & consulting

REF.-No. 00309 Name new 2 x hydraulic power units Manufacturer GKS hydraulic GmbH + CoKG model 8622681 Built in 1986 Pressure 50 bar Flow rate 24.6 L / min Content oil tank 70L Other with Rexroth control valves 1 x 4WEG H51 / AG24NZ4 1 x 4WEG E51 / AG24NZ4 Due date immediately

Category: 110 accessories for machine tools
New in: used
Location: Land-de DE
Seller: Schraag Werkzeugmaschinen GmbH

for horizontal projectors.

Category: 110 accessories for machine tools
New in: used
Location: Land-de DE
Seller: Schraag Werkzeugmaschinen GmbH

1 set, suitable for horizontal projectors.

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)