Category 2468: semi-trailers/swap chassis

Tube bending machines(80mm) Tube Bending M/C x2sets Make: Soco(Taiwan) Year:2010 Model: SB-83X-3S-SR-1B Cap.: Max.ø63.5mm Draw Bending Radius: Max.250mm Collet Feeding Length Stroke : Max.2,600mm Length Over Mandrel: Max.4,340mm Interference Zone Booster Stroke : 100mm Bending Angle: 190° No. of Bend Per Tube: 50Bends PC Control Unit Tool x2set Saw Cutting M/C x2sets Make: Soco(Taiwan) Year:2010 Model: HVS-355AC-B Cap.: Max.ø63.5mm ...

FPCB Process Line for Mobile Phone 3 PARAGON-Xpress(#1,#2) x 2sets Make: ORBOTECH (Korea) Year:2014 GUIDE width: 700mm Efficiency width : 650mm Purpose material size: MAX650mm650mm Purpose material thickness : 0.025-8mm 4 Fusion22 5 Verismart 6 Vacuum LAMINATOR x2sets Make:Ritec(Korea) Year:2014 GUIDE WIDTH: 700mm Efficiency width: 650mm Purpose: FPCB Purpose material size: MAX500mm500mm MIN250mm250mm Purpose material thickness: 0.1-1.6mm TACK TIME: 60SEC 7 Automatic WET LAMINATOR Make:R ...

FPCB Process Line for Mobile Phone 3 PARAGON-Xpress(#1,#2) x 2sets Make: ORBOTECH (Korea) Year:2014 GUIDE width: 700mm Efficiency width : 650mm Purpose material size: MAX650mm650mm Purpose material thickness : 0.025-8mm 4 Fusion22 5 Verismart 6 Vacuum LAMINATOR x2sets Make:Ritec(Korea) Year:2014 GUIDE WIDTH: 700mm Efficiency width: 650mm Purpose: FPCB Purpose material size: MAX500mm500mm MIN250mm250mm Purpose material thickness: 0.1-1.6mm TACK TIME: 60SEC 7 Automatic WET LAMINATOR Make:R ...

30MW(MAX.50MW) SOLAR MODULE PRODUCTION LINE Make: SFA(KOREA) Manufacturing year: 2010 Cell Thickness: 180 ± 20 ?m Cell Size: 156 ×156 mm ± 0.5 mm Cell: 6 Inch (Equipment list) CELL SORTER STRINGER LAY UP EVA DISPENSER EVA/Back SHEET CUTTER LAMINATOR AUTO TRIMMING SEMI FRAMER SIMULATOR AUTOMATION BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:paekJs1961@gmail.com MOBILE)+82-10-7499-2567 Busbar width:1.3mm

30MW(MAX.50MW) SOLAR MODULE PRODUCTION LINE Make: SFA(KOREA) Manufacturing year: 2010 Cell Thickness: 180 ± 20 ?m Cell Size: 156 ×156 mm ± 0.5 mm Cell: 6 Inch (Equipment list) CELL SORTER STRINGER LAY UP EVA DISPENSER EVA/Back SHEET CUTTER LAMINATOR AUTO TRIMMING SEMI FRAMER SIMULATOR AUTOMATION BMJ KOREA CO.,LTD DIRECTOR:JONGDUK E-MAIL:paekJs1961@gmail.com MOBILE)+82-10-7499-2567 Busbar width:1.3mm

Counter (m): 2658185 Equipment / Additional information: PRINTER SPECIFICATIONS Print speed. A4: Up to 60 pages / minute Print speed. A3: Up to 34 pages / minute Print resolution: 1 '200 x 1' 200 dpi x 8 bit; max: 1 '200 x 3'600 dpi Grayscale: 256 semitones SCANNER SPECIFICATIONS Scangeschw. A4: Up to 40 originals / minute Scangeschw. A3: Up to 22 originals / minute Scan resolution: 600 x 600 dpi Scan mode: TWAIN scan; Scan-to-HDD; Scan to FTP Scan to SMB; Scan to E-mail Scan formats: TIFF (single an ...

Manufacturer: Faraz Type: KA 3.5 Year of construction: 2001 Max. Total weight: 3500 kg Load compartment internal dimensions L x W x H: 4,550 x 2,000 x 2.390 mm Car trailer hitch ball Overrunning brake Wood shelf decor, home-built Vehicle equipment, sheet metal shelf Skylight and fluorescent lamp 230 volt power outlet 270° rear Portal doors Condition of tyres: approx. 60-80% 73450 Neresheim price plus 19% VAT from site Mistakes and intermediate sale is reserved

VERTICAL PACKING MACHINE HSV 101 S FLEXIBLE along with the conveyor can be compensated with dildo Decentralized drive and flexible control of the machine is welding torch system The device is completely decentralised structure drive A wide range of packaging and bulk products easy control and programming A wide range of optional equipment easy replacement of the tube with flange by means of clamps quick change clamping units Effectively set the cut as a sign of low energy consumption 100 memory settings automa ...

AGK Table for fish gutting Manufactured year: 2004 Condition: Excellent Designed for semi-manual processing fish. Equipped with a special hook for hanging fish before gutting, device for suction offals and automatic brush for final cleaning of flesh. Suitable for small restaurants, buffets and fish shops. An operator can reach capacity in gutting up to 400 per hour. Power: 0,38 kW Voltage: 380 V \ 50 Hz Dimensions (LxWxH): 1200 x 600 x 850 mm Construction of table and order of tools re ...

Format: 800x1100mm, plate holes: 70x80mm, including squeegee, several sieve frames and accessories.

3 swap bodies: Platform / flatbed - Palne / working structure carrier Manufacturer: Bao Type: ATL 25 Year of construction: 2000 HU: 01 / 2019 Max. Total weight: 2,500 kg Payload flatbed / tarpaulin: 1.080 kg Payload platform: 1.420 kg Payload working scaffold: 1.180 kg Dimensions L x b 4.50 x 2.05 m Integrated hydraulic up and down the swap bodies Overrunning brake Tyres condition ca.80% 73450 Neresheim price plus 19% VAT from site

5/0-2/3 KOMORIMATIC DAMPENINGTECHNOTRANS COOLINGAUTOMATIC WASHERPOWDER RPQCAMRSEMI-automatischer PLATTENWECHSEL \ SPRAYER

5/0 – 2/3 PQC AMR Semi AUTOMATIC PLATE CHANGE KOMORIMATIC DAMPENING TECHNOTRANS COOLING AUTOMATIC WASHER POWDER SPRAYER

2 x 5 t earrings with flatbed, ground well with new press platens, instantly ready to go

10 hl Sudwerk 3 Gefaesse. Maischepfanne, LB, Whirlpool, Dampfheizung Semiautomatik. Plug and Play. Abmessung länge 5,9 breite 2,4 höhe 3,0 plus 1 m Kamin

10 hl brewhouse 3 vessels. Mash, LB, whirlpool, steam heating Semi automatic. Plug and Play. Dimensions length 5.9 3.0 plus 1 m chimney height width 2.4

Man Roland R 305Year: 1999Size: 52x74Impression: 148 Million5 Farbe gerade MachineRCI Remote ControlSemi Auto Platte ChangeAuto Roller – Decke Waschmaschine (nicht in Betrieb) Auto Größenanpassung im Feeder - DeliveryTechnotrans Alpha D RecirculationCarton DevicePlate Punch – BenderGrafix PowderStill in ProductionLocated in TurkeyAvailable sofort

Man Roland R 305 Year: 1999 Size: 52x74 Impression: 148 Million 5 Color Straight Machine RCI Remote Control Semi Auto Plate Change Auto Roller – Blanket Washer (Not in Use) Auto Size adjustment in Feeder - Delivery Technotrans Alpha D Recirculation Carton Device Plate Punch – Bender Grafix Powder Still in production Located in Turkey Available immediately

Complete compressor stations Bitzer (low-temperature) - Semi-hermetic piston compressor Bitzer (3 pcs.) Model: 4TC-12.2Y-40P Productivity: 41,3 m3/h Cooling capacity: 8,6 kW, at -30/40°?, R404A - Semi-hermetic piston compressor Bitzer (3 pcs.) Model: 4DC-5.2Y-40S Productivity: 26,9 m3/h Cooling capacity: 5,7 kW, at -30/40°?, R404A

Mitsubishi D3000 LS 4 + Coater Year: 2002 Impression: 235 Million Mitsubishi Console Semi Auto Plate Change Automatic Washers Technotrans Beta C Cooling – Recirculation Baldwin IR Dryer Preset Grafix Powder Chrome Cylinders Ink Temperature Control Still in production Available immediately

Mitsubishi D3000 LS 4 + CoaterYear: 2002Impression: 235 MillionMitsubishi ConsoleSemi Auto Platte ChangeAutomatic WashersTechnotrans Beta C Kühlung – RecirculationBaldwin IR DryerPreset Grafix PowderChrome CylindersInk Temperatur ControlStill in ProductionAvailable sofort

Cooling capacity: 9 kW, at -30/+40°? Productivity: 38 m3/h Year of manufacture: 2003 Type of refrigerant: R404A Condition: This semi-hermetic piston compressor is in excellent condition.

CI flexo printing press 8 + 0 Printing width: 1300mm Web width: 1350mm Printing repeat: 340-800 Printing speed: Up to 400m/min depending on type and quality of materials to be printed, inks, cylinder repeat, plates, ink coverage with colour overlay Plate thickness: 1.14mm (0.0045-inches) plus adhesive 0,5mm (0,0020-inches)(any plate thickness depending to sleeve/repeat) Anilox sleeves: Diameter 172mm ceramic coated sleeves Ink: Solvent and water-based Material: HD-LDPE / 14-100um / PP, 10-50um / PET 10 ...

CI flexo printing press 8 + 0 Printing width: 1300mm Web width: 1350mm Printing repeat: 340-800 Printing speed: up to 400m / min depending on type and quality of material to be printed, inks, cylinder repeat, plates, ink coverage with colour overlay Plate thickness: 1.14mm (0.0045-inches) plus adhesive 0, 5mm (0,0020 inches)(any plate thickness depending to sleeve/repeat) Anilox sleeves: diameter 172mm ceramic coated sleeves Ink: Solvent and water-based Material: HD-LDPE / 14-100um / PP, 10-50um / PET 10-50 ...

Filling Line Krones / KOSME PET 4500 bph for CSD The line was built by Kosme (nowadays a part of Krones) in 2007. It has been in water filling operation only less than 900 total operating hours and is still installed, powered and can be tested. Line is also suitable for carbonated and non-carbonated soft drinks and waters. Three sets of molds will be a part of this delivery. This line contains also mixer – carbonator which allows to produce carbonated soft drinks. Condition is very good. Main characteristic ...

Cutting diameter: 340 x 200 mm Section 45° round: 230 mm Cutting speed: 20-120 m / min Stroke: 600 mm Blade dimensions: 4770-4870 x 32 x 1 mm Total power: 4 kW Machine weight: 1400 kg Dimensions (W x D x H): 2.6 x 1.4 x 1.6 m semi-automatic flow, heavy duty machine, good condition, ready for use

Axle set for trailers and semi-trailers Make: GFA FAHRZEUGBAU UND ANTRIEBSTECHNIK GMBH Description: axis set including: 3 axes, 1 piece axle lift and 2 piece conventional axes, unused and as good as new, completely ready for installation, maximum axle load 9,000 kg

With integrated in- and outgoing roller table.

Enthält 8 Bahnen mit Hängekontrolleinheit (Demag) Cabezal Polipasto Förderband Inhaltsverzeichnis Depalettieren

It includes 8 lanes hoist with Pendant Controller (Demag) conveyor table Head of depalletizing

coater tower (chambered doctor blade system) WallScreen Prinect Press Center with Remote Control of Ink Zones, Ink Fountain Roller as well lateral, circumferential and diagonal Register, with Light Pen, Job Memory Card and Touch Screen ALCOLOR damping with circulation and refrigeration CombiStar Pro ink temperature control AUTOPLATE semi-automatic plate change PRESET PLUS automatic size adjustment automatic ink roller wash-up device automatic blanket and impression cylinder wash-up device CleanStar powder  ...

coater tower CP2000 Center with Remote Control of Ink Zones, Ink Fountain Roller as well lateral, circumferential and diagonal Register, with Job Memory Card and Touch Screen ALCOLOR Vario damping with circulation and refrigeration ink temperature control AUTOPLATE semi-automatic plate change PRESET automatic size adjustment automatic ink roller wash-up device automatic blanket and impression cylinder wash-up device powder sprayer IR-dryer DryStar 2000 extended high pile delivery with Air Transfer System ...

PDS-E print density control system PCS-H colour control Ryobimatic damping with Technotrans circulation and refrigeration S-APC semi-automatic plate change automatic roller wash-up device automatic blanket and impression wash-up device powder sprayer IR-dryer Baldwin low pile delivery serial equipment

SEMI-NEW diesel engine ALCO 251-C

Vacuum plate: 800x1700mm, vacuum surface: 700x1580mm, max. printing format: 700x1600mm, max. frame format: 1000x1900mm, max. printing material thickness: 25mm, printing speed: 0-835mm/s.

WOOK IL WTNS-SSF 1700, 2004 Ref.Nr: 2596 manufacturer WOOK IL model WTNS-SSF 1700 year built: 2004 Max sheet size: 1200 x 1700 mm availability: immediately condition: good price: on technical request spezification: â?¢ minimum gripper edge: 10 mm â?¢ Punching pressure: 400 ton â?¢ This material: 1-10 mm, corrugated fiber board (B, A, AB flute) â?¢ flatbed semi-automatic punch

WOOK IL WTNS-SSF 1700 ,2004 Ref.Nr : 2596 Manufacturer WOOK IL Model WTNS-SSF 1700 Year built : 2004 Max. sheet size : 1200x1700 mm Availability : immediately Condition : good Price : on request Technical spezification : • Minimum gripper edge: 10 mm • Punching pressure: 400 ton • Material thicknesses: 1-10 mm, corrugated fiber board (B, A, AB Flute) • semi-automatic flatbed punch

3-piece exhibition stand, exhibition pavilion for food, drinks or stall with a trailer for storage and transport Built in 1979 renovated at great expense in 2016 The complete level comprises three parts, a large main Pavilion Pavilion and two smaller side, see picture 2 The entire, 3 - piece stand has a sales counter of estimated. 30 running meters Ideal for October festivals, folk festivals and large trade fairs Sales take place without the visible in the background (chicken grills, etc.) Devices  ...

Martin 924 ,1990 Ref.Nr : 2595 Manufacturer Martin Model 924 Year built : 1990 Speed : 18000 sh/h Max. sheet size : 920 x 2.450 mm Availability : 03/2019 Condition : good Price : on request Technical spezification : • Prefeeder: Roda FB 38 with retrofitted Siemens PLC control, built in 1990 • Vacuum feeder: SUN, built in 2011 • Printing: MARTIN Rapidset 2 colors, built in 1990 • Slotter: MARTIN, built in 1990 • Rotary: MARTIN, built in 1990 • Folding: MARTIN, built in 1990  ...

Martin 924, 1990 Ref.Nr: 2595 Manufacturer Martin Model 924 year built: 1990 speed: 18000 sh/h Max sheet size: 920 x 2,450 mm availability: 03/2019 condition: good price: on technical request spezification: â?¢ PreFeeder: Roda FB 38 retrofitted with Siemens PLC control, built-in in 1990 â?¢ Vacuum feeder: SUN, built in 2011 â?¢ Printing: MARTIN RapidShare set 2 colors, built in 1990 â?¢ Slotter: MARTIN, built in 1990 â?¢ Rotary: MARTIN, built in 1990 &ac ...

- Baujahr : 1992 - Hersteller: Wolf-Geräte - Typ: Eurogreen Portax 2000 - Antrieb über Zapfwelle - Steuerung über Hydraulik von Fahrzeug - Ladebunker hydraulisch kippbar. - 4-fach Bereift, Stützrad. - Gewicht 410 kg.

-Year of construction: 1992 -Manufacturer: Wolf appliances -Type: Eurogreen Portax 2000 -PTO drive -Control by hydraulic system of vehicle -Hydraulically Tiltable loading bunker. -4 x frosted, Jockey wheel. -Weight 410 kg.

Zur Demontage bestimmte Lagerhalle mit dem Grundriss von ca. hL80.02 hB31.78 H7m und einer überdachten BGF von rund 2543 qm. In deren zweitem Lebenszyklus könnte dieses Tragwerk zur Errichtung einer Produktions- und Lagerhalle, Werkstatthalle dienen. ABMESSUNGEN gemäß Übersichts-Zeichnung: Überbaute BGF: ca.2543qm; Hallen- Länge: ca. 80,02 m AK Wandverkleidung; Längs- Raster: ca. 8,820m MM Hauptrahmen; ca. 4,410m MM Zwischenrahmen; Rahmenabstand: ca. 4,730m MM Endfeld-Stützen Längs ...

Pre engineered, pre fabricated Warehouse Steel building Kit, covering approx. 2543 square meters, measuring approx. 80 m (length) 32 m (width) 7 m (eaves). The structural framework consists of hot rolled European standard where sections. Main frames are made of IPE 500 euro profiles. The roof - and wall - cladding consists of light concrete panels that shall be disposed of. What you get is a durable over engineered structural steel work, requiring about five 40 ft trailers to collect. Superb, rigid frame, excelle ...

Schneidlstg. vkt. 90 °: 250 x 250 mm Schneidlstg. vkt. 45 °: 190 x 190 mm Schneidlstg. rd. 90 °: 250 mm Schneidlstg. rd. 45 °: 190 mm Schneidlstg. flach 90 °: 280 x 230 mm Schneidlstg. flach 45 °: 190 x 230 mm Sägebandgeschwindigkeit: 48 / 72 mtr. / min. Sägebandabmessung: 2760 x 27 x 0,90 mm Gesamtleistungsbedarf: 0,90 / 1,20 KW / 400 V Maschinengewicht: ca. 400 kg Maschinenabmessung: 1500 x 900 x 1300 mm Ausstattung / Zubehör: Rollenbahn 1 mtr. Kühlmitteleinrichtung hydr. Werkstückkle ...

Schneidlstg. VKT. 90 °: 250 x 250 mm Schneidlstg. VKT. 45 °: 190 x 190 mm Schneidlstg. about 90 °: 250 mm Schneidlstg. about 45 °: 190 mm Schneidlstg. flat 90 °: 280 x 230 mm Schneidlstg. flat 45 °: 190 x 230 mm Blade speed: 48 / 72 mtr. / min. Band saw blade dimensions: 2760 x 27 x 0,90 mm Total power consumption: 0.90 / 1.20 KW / 400 V Machine weight: 400 kg Machine dimensions: 1500 x 900 x 1300 mm Equipment / Accessories: Roller conveyor 1 mtr. Coolant system Hydr. Workpiece clamping Mat ...

Dough dividing and moulding machine Fortuna bun press Gr. 4 semi automatic 30-teilig Pasta insert 1200 up to 3300 g, pieces from 40 to 110 g Newly revised head of part of with 3 new casting plates E system newly tested DGUV V3 Connection 400V, 16A-CEE plug Reconditioned second-hand machine with 6 months warranty

For fluid and viscous procucts, format: 15-150ml, cycle speed: 15-25/min, documentation available, including accessories.