Description: drill capacity 20 mm MK2 intake spindle speed (6) 450 - 3200 rpm pinole stroke 90 mm outfeed 160 mm column diameter Ø 80 mm drilling table 250 x 250 mm base 320 x 440 mm including Röhm quick-clamping drill chuck 3-16 mm Approx. Onsite Dimension. (l x w x h): 350 x 580 x 1,620 mm, weight approx.: 155 kg

ID3202 Wellco-Drill WD80 approx. 3110 hours/ hours Drilling rig, Hatz 3-cylinder diesel engine, fully hydraulic cylinder feed, flushing drill head - reinforced version, drive pin and pulling bell, rod catching device, centrifugal pump, cable winch, 4 hydraulic support cylinders, control panel, machine has been general overhauled (the control blocks have been completely renewed, the chain profile is new, the interceptor is new, the drill head has been completely overhauled, all possible wear parts have been renewed, all hydraulic components have been overhauled) Drilling rig, Hatz 3-cylinder diesel engine, fully hydraulic cylinder feed, directional drill head - reinforced design, drive jo ...

Description: SEC-100 TBC is an automatic collaring machine for making manifolds It includes a feed table with either 1- or 2-axis control The tube is fastened from its both ends to the SEC-100 TBC A suitable collaring program is selected from the PC controls and an automatic cycle is started SEC-100 TBC makes all the collars according to the selected program Manual process: • preset the elliptical pilot hole parameters manually. • install the preadjusted collaring head and the clamps accoridng to the tube size. • set the axial tube stop. • mount the tube in the clamps. • push the start-button and the cycle will start. Automatic cycle: • the clamps close and the EC-100 mills the e ...

ID3203 Wellco-Drill WD500 year/Year of construction 1994 approx. 2780 hours/ hours Drilling rig, crown regulating load 100 kN, crown extraction load 100 kN, hydraulic power jetting head (torque 10,000 Nm), drilling pressure max. 55 kN, tractive force 55 kN, interception device max. 219 mm, 2 winches, centrifugal pump, piston pump        Drilling rig, crown control load 100 kN, crown exception load 100 kN, hydr. Power flushing head (torque 10,000 Nm), drilling pressure max. 55 kN, tensile force 55 kN, interceptor max. 219 mm, 2 winches, centrifugal pump, piston pump

Description: Serial number: 8425402 Nominal speed: 530 rpm Power: 710 W In case with accessories Approx. Onsite Dimension. (l x w x h): 540 x 310 x 130 mm, weight approx.: 20 kg ...

• more information

3x Bradley & Turton 50ton Upstroking Presses 380mm x 380mm (15”) sq platens Electrically heated platens 540mm (22”) daylight Fully guarded With individual temperature controls  ...

• more information

10 meter deep hole boring machine Kramatorsk KJ1910 10-meter boring depth - Heavy duty: 25-ton workpiece foratrice per fori profondi Heavy duty: Max. work-piece weight 25 tons Spindle motor kW 85 Counter rotation motor 90kW Spindle hole diameter mm 700 Max. boring diameter, mm 600 Center height over the bed, mm 670 Max. work piece external diameter, mm 1300 Work piece length range on one-sided machining, mm 1000...10000 Work piece diameter range, mm: Machine overall dimensions, approx mtrs 31 x 3 x 2,3 Machine weight, kg 90000 (approx) Machine in our wahouse (I-25064 Gussago - BS - Italy), Counter rotation: Yes, Drlling depth: 10000 mm, Max workpice weight: 25 ton, Spindle motor: 90 kW, Coun ...

Ixion CNC deep hole drilling machine Machine can be seen in working condition Machine is in good working condition Control Unit: Mitsubishi M 530 X axis: 700mm Y axis : 400 (800 optional) mm Z axis : 1000mm W axis: 1100 mm Table size: 1375 x 700 mm Table weight 2000 kg Tool holder: SK 40 Spndle speed: 100 - 4000 rpm. Spindle engine: 3/5,5 kW Drilling capacity: 25 mm

Specifications Shredder Cutting width: 7.8x55 mm Power supply: 400 V/7.5 kW the safety level 2+1 wg DIN 32757 P-3, O-2, T-2 wg DIN66399 pt. 5.2 Productivity: ok. 300-500 sheets (A4, 70g/m²) Baler Maximum pressure: 9 tons Press force: 1.94 kg/cm² Productivity:- Bale size: 770x600x500 mm Price: on request Bale weight: - Power supply: 400 V/4 kW Machine is fully functional, after technical supervision. Price also includes paint renovation.

Mollart Sprint 500, deep hole drilling machine, Fanuc Power Mate control, Max L = 500mm, Dia 20 mm, Spindles: 2, Spindle rotation: 10000 RPM, 100 RPM counter spindle rotation, Max pressure 100 BAR, The machine can be inspected under power in our warehouse in Gussago BS., Mimu machine tools, Deep hole drilling is the machining of holes with a relatively large depth to diameter ratio, whereas normal drilling techniques produce holes where the depth is rarely more than five times the diameter (5 xD). In deep hole drilling the ratio may reach 150:1, and any hole deeper than ten times the diameter (10 xD) should certainly be considered a deep hole, requiring a specialized drilli ...