universal center used for sale

We offer you 10 new safety pins for purchase. - incl. shipping throughout Germany - Included are: 10x Locking pins, new Material color: complete. galvanized Usage: Universally applicable Head diameter: 9.74 mm Pin diameter: 4.90 mm Weight: 0.007 Kg / Pcs. To secure the longitudinal beams against unintentional lifting Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection carried out in accordance with DIN EN 15635 in accordance with the Requirements of the BGR 234 visual inspection for all shelving systems Delivery with our own fleet (without discharge)

We offer 10 new safety pins for purchase. - incl. shipping throughout Germany - Included are: 10x Locking pins, new Material color: complete. galvanized Usage: Universally applicable Head diameter: 17.70 mm Pin diameter: 7.86 mm Weight: 0.030 Kg / pcs. To secure the longitudinal beams Against unintentional lifting Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection carried out in accordance with DIN EN 15635 in accordance with the Requirements of the BGR 234 visual inspection for all shelving systems Delivery with our own fleet (without discharge)

Hydraulic rescue scissors operated with hydraulic pump (630bar) internal combustion engine. To be used as e.g. cable scissors for use in areas without power supply. 1 set with fuel-powered hydraulic unit 1 hydraulic scissors 1 hydraulic spreader All the goods in very good, ready-to-use condition. Special price

No. 4973: 1 gebr. Hydraulic unit 250 l / 60 bar / 40 l/min Fabr. UNIVERSAL Hydraulics, Bauj. 1987 with formerly HEYLIGENSTAEDT Heynumat 10 Arb.-Ber.: approx. 900 x 650 x 1500 mm, drive power: 5.5 kW Other: approx. 300kg (estimated)

Travel X-axis 1100 mm Travel Z-axis 360 mm Travel Y-axis 400 mm Table length: 1600 mm Table width: 360 mm Spindle taper: ISO 50 Main axle speed range: 32 – 1250 rpm. With vertical and chisel head accessories Year of manufacture: 1990 Cooling water system works. High-speed clutch burned out, to be renewed. Advance functions can be controlled manually.

Universal Slitting Line 72″ x .187″ x 20,000Lb Material Width: 12″ – 72″ Material Thickness: .015″ – .187″ Coil Weight: 20,000Lb Coil ID: 20″ Coil OD: 72″ Direction: Left to Right Entry Floor Standing Coil Car L-Type Design Hydraulic Lift & Traverse Mandrel Uncoiler Powered Hold-Down Roll Hydraulic Expansion Air Cooling Brake Sliding Base Hydraulic Peeling Table Slitting Head Arbor Diameter: 7″ Powered Arbor Adjustment 100HP DC Motor Knives & Tooling Recoiler Powered Push-Off Hydraulic Over-Arm Separator Hydraulic Expansion 100HP DC Motor Exit 2-Arm Turnstile Arm Width: 72″ Powered Rotation Complete Slitter with Electrics, Hydraulics, Controls, Tooling

Manufacturer Universal piston filler 6 heads capacity 500 ml with dubble fill can do 1000ml

Manufacturer Universal 12 head servo control filling machine year 2016

The machine is Universal Pack from Italy, the machine is full automatic, with 2 tracks, with embossed paper stamping system, with 2 colors, the dimensions of the bust are variable, the amount of filling varies from 1 to 10 grams per bust. The machine is slightly used

Universal Pack Gamma-M5D Sachet Machine – 5 lane This machine has come direct from a closed sauce manufacturing company, was producing small sachets of barbecue sauce. 2015 machine with fillers for hot fill and cold fill.

Working width: 90inch, yarn count E: 10.

Working width: 2300mm, yarn count E: 8.

Yarn count: 10, nominal width: 90inch.

Technical details on demand.

Nominal width: 2500mm/ 96inch, yarn count E: 10.

Working width: 2290mm.

With accessories and documentation.

As good as new, reach: 850mm, payload: 5kg, repeat accuracy: 0.03mm, weight: 20.6kg. With teach panel, control box, manuals. On-site inspection is possible.

B&A REF: 8889 TON: 45TON SHOT WEIGHT: 45 SCREW DIAMETER: 25MM STROKE VOLUME: 49CM3 INJECTION PRESSURE: 2240AR PLATEN SIZES: 446 X 446MM DBTB: 320 X 320MM MIN MOULD HEIGHT: 200MM MAX MOULD HEIGHT: MM MAX DAYLIGHT: 55MM EJECTOR STROKE: 125MM CONTROLS: SELOGICA AIR VALVES: 1 SCREW DRIVE: HYDRAULIC

- Software updated: 3.15.8 - Hours: 1280 - Working radius: 850 mm - Payload: 5kg Condition: very good, hardly any wear due to the low loads. Mainly used for measuring sensors in the laboratory. Circumference: - Robot with control panel and control - Folder with user manual - mobile, solid table

Used dissolver by UNIVERSAL - PASQUALE MORENO GENOVA. Description: - stirrer drive: electric - lifting of mixing column: hydraulic - adapted for screw feeder for dosing of loose semi-finished products - stainless steel INOX caddy, without drive - dispersing disc diameter: 25 cm - disc rotation: max 2800 / min 1400 rpm - dimensions of vat: 110 cm diameter x 100 cm height - DIMENSIONS (l x w x h): 2.10 x 1.10 x 1.70 h - power supply: 380/400V

Universal Roborts ,model, ur3 Serial number 2017332039 Year of manufacture 2017 with driven rollers Bannō Working width approx. 600 mm so security around the house Acrylic glass with aluminum frame belonging to a robot control Manufacturer Universal Roborts cb31ur3

feed pressure: 200 bar liter capacity: 250 l weight of the machine ca.: 0,3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel:760 mm y-travel:820 mm z-travel:560 mm rotary table tiltable:A-Achse +30 ~ -120°, C-Achse: 360°, Min. Index-Inkrement 0.001° table-size:630 mm distance floor area / table surface:900 mm table load:600 kg Workpiece dimensions:max.Ø800x500 mm spindle speeds:20000 1/min. spindle drive:40 kw spindle taper:40 BBT milling feed range:1-10000 mm/min rapid traverse in x-y-z axis:48 m/min rapid traverse speed:Tisch (A-/C-Achse): 83/125 mm/min Tool changer:30 fach max. tool length:125 mm max. tool weight:8 kg max. tool diameter:80 mm Machine size (LxWxH):2200x4000x3415 mm high speed directl spindle motor:20000 1/min CNC controller:Heidenhain iTNC-530 Full 5 axis chip conveyor - auger:im Bett :Marposs mida laser 75P Tool setter:Marposs mida laser 75P Scales:X/Y/Z Achse von Heidenhain Factory new, immediately available CNC 5-axis universal machining center with CNC control HEIDENHAIN TN ...

This MORBIDELLI Universal 3012 TV Universal Machining center was manufactured in the year 2008. It is equipped with a CNC XILOG Plus control unit and has 3 axis.

This POSmill H 800 U Universal Machining center was manufactured in the year 2019. It is equipped with a HEIDENHAIN TNC i 530 control unit and has 5 axis. The machine has a spindle speed of 18000 rpm. This High-performance machining center is ideal for both demanding tool and mold making and high-volume production. Standard torque drives on all rotary axes enable full simultaneous 5-axis machining (swivel range: +/-120 degrees, rotary table: 360 degrees endless). See attached the full tech specs of the original order confirmation.

This RAPID MFC EVOLUTION II Universal Machining center was manufactured in the year 2009. It is equipped with a PC-controlled control unit. The machine has a spindle speed of 18000 rpm.

This HERMLE UWF1200 Universal Machining Center was manufactured in the year 1991 and has 57000 production hours. It is equipped with a HEIDENHAIN TNC 407 control unit and has 3 axis.

This DMG MORI DMF 300-8 Universal machining center was manufactured in 2023. It is equipped with a SIEMENS 840D SL control unit and has 5 axis. The machine is completely new and has the full OEM warranty. Currently it is located in Germany.

This MAHO MH 600 E Universal Machining Center was manufactured in the year 1986 in Germany. It is equipped with an MAHO CNC 432 control unit and has 3 axis.

This OKUMA GENOS M460V-5AX Universal Machining center was manufactured in the year 2019. It has 5 axis and a tool magazin with 48 slots. The machine has a spindle speed of 15000 rpm.

This Röders RFM 760/2 Universal Machining Center was manufactured in the year 2004 in Germany. It is equipped with a Röders RMS 6 control unit and has 3 axis. The machine has a spindle speed of 42000 rpm.

x-travel: 450 mm y-travel: 600 mm z-travel: 330 mm control: iTNC 530 Heidenhain Main spindle:: turning speeds: max. 18.000 min/-1 power capacity - main spindel: 31 / 17 kW max. Torque: 98 / 54 Nm tool taper: HSK A63 swiveling-rotary-table:: rotary table dia.: 320 mm Swivel range: A: +/- 135 ° rotatable: C: 360 ° max. table load: 300 kg Number of revolutions: A: 25 / C: 40 rpm T-slots: 4x 14H7 Tool-Presetter:: number of toolpositions: 55 pos. tool taper: HSK A63 max. tool diameter: 80 mm max. tool-dia with free toolbox: 125 mm max. tool length: 250 mm max. tool weight: 8,0 kg max. total weight: 220 kg change-time chip to chip: 4,5 sec feeds:: Accelaration: 8 m/sec² Feed force: 4,5 kN rapid traverse ( X / Y / Z ): 30 m/min total power requirement: 40 kVA weight of the machine ca.: 9,0 t dimensions of the machine ca.: 6,5 x 6,5 x 3,5 m Documents: NC-Rotary Swiveling Table: Automati ...

This GROB G350 Universal Machining Center was manufactured in the year 2011 and has 54019 hours, of which 17507 are spindle hours. It is equipped with a SIEMENS SINUMERIK 840D control unit. The machine has a spindle speed of 18000 rpm.

This EMCO EMCOMAT FB-450 Universal Machining center was manufactured in the year 2012 in Austria and has 1262 production hours. It is equipped with a EMCO CYCLE control unit and has 3 axis. The machine has a spindle speed of 20-5000 rpm.

This Deckel Maho 70V Universal Machining center was manufactured in the year 2000 in Germany and has 31665 production hours. It is equipped with a Deckel Maho control unit. The machine has a spindle speed of 12000 rpm.

This DMG CTX Alpha 500 Universal Machining center was manufactured in the year 2017 in Italy. It is equipped with a HEIDENHAIN CNC Pilot 640 control unit. The machine has a spindle speed of 5500 rpm.

This DMG MORI DMU 95 monoBLOCK Universal Machining center was manufactured in the year 2019 in Germany. It is equipped with a CELOS HEIDENHAIN ITNC 640 ErgoLine control unit and has 5 axis. The machine has a spindle speed of 20000 rpm.

This HAAS UMC-500 Universal Machining center was manufactured in the year 2020 in the United States. It is equipped with a HAAS control unit and has 5 axis. The machine has a spindle speed of 15000 rpm.

This MAHO MH 600 E Universal Machining center was manufactured in the year 1993 in Germany and has 25856 production hours. It is equipped with a Philipd CNC 5000 control unit. The machine has a spindle speed of 20-5000 rpm. See original tech specs attached as PDF (German) for more details.

This DMG Mori HSC 55 linear Universal Machining Center was manufactured in the year 2011 and has 61913 control hours, 59275 machines on hours, 10986 program run hours, and 10631 Spindle running time (spindle exchange at approx.7300 hours). The machine has a spindle speed of 20 - 28000 rpm. It is equipped with a Heidenhain iTNC 530 control unit and has 5 axis.

This Vison Wide VTEC SF-3120 Universal Machining center was manufactured in the year 2014 and has 17500 production hours. It is equipped with a Fanuc Series Oi-MD control unit and has 3 axis. The machine has a spindle speed of 12000 rpm.

This HAAS UMC-500SS Universal Machining center was manufactured in the year 2021 in the United States. It is equipped with a HAAS CNC control unit and has 5 axis. The machine has a spindle speed of 15000 rpm.

This ELUMATEC SBZ 122 Universal Machining center was manufactured in the year 2005. It is equipped with an Elumatec E 550 control unit. The machine has a spindle speed of 21000 rpm and comes with a suction unit.

This DMG DMC 80 U duoBLOCK Universal Machining center was made in 2008 in Germany and has 28951 production hours, of which 14200 are spindle hours. It is equipped with a Heidenhain TNC 530 control unit and has 5 axis. The machine has a spindle speed of 12000 rpm.

This DMG MORI CMX 70 U Machining center (universal) machine was manufactured in 2018 in Germany. This machine boasts an 800 x 620 mm table and speeds from 20 to 12,000 rpm. It has rapid traverse linear axes at 30 m/min, SK40 tooling with a 30-position magazine, and internal cooling at 40 bar. It features an ATC, chip conveyor tank (300L), paper belt filter (600L), and is controlled by a DMG MORI SLIMline Multi Touch Control with HEIDENHAIN TNC 620. Contact us anytime for further information.

This DMG Mori DMU 50 Universal Machining center was manufactured in the year 2016 in Germany and has 11,212 machine on hours of which 3,596 are spindle hours. It is equipped with a CELOS SIEMENS 840D sI Operate Multi Touch control unit and has 5 axis. The machine has a spindle speed of 14000 rpm. See geometry protocol attached as PDF, made by DMG Mori on January 29th, 2024 for further information on the condition of the machine.

This DMG DMU 105 MonoBlock Universal Machining center machine was manufactured in the year 2013 in Germany and has 24687 spindle hours. It is equipped with a HEIDENHAIN iTNC 530 HSCI control unit. It disposes of a scraper belt chip conveyor and a vertical chain magazine basic with 60 magazine slots. See original order confirmation (German) as PDF attached for more details.

This DMG Mori DMU 50 Universal Machining center was manufactured in the year 2005 in Germany and has only 2,870 spindle hours (15,380h control on). It is equipped with a SIEMENS SINUMERIK 840D control unit and has 4 axis (X/Y/Z + servo rotary table). Next to a 16 tools magazine it will be delivered with: Measuring system X-Y-Z axis, air cooling, handwheel and second cabin door.

This Ken Focus5 2022 Universal Machining Center was manufactured in the year 2017 in Taiwan. It is equipped with a HEIDENHAIN control unit and has 5 axis. The machine has a spindle speed of 24000 rpm.