ubr used for sale

Two identical 625 KVA dynamic UPS systems UB-R III 625 piller for sale. 19.500 € for each aggregate plus VAT. FCA freely charged in D-Bergisch Gladbach. (uninterruptible power supply). Hybrid rotating/dynamic units. Uniblock UBR 625. The systems work perfectly, an annual maintenance was carried out by the manufacturer Piller. The facilities were also run quarterly for a few hours so that the camps would not be damaged. Brand: PILLER Type: UBR III 625 with battery Serial No.: 950 6005 689 Year of construction: 2009 Electr. achievement: 625 KVA Voltage: 400 V Current (A) Input data 1027 / 917 Initial data 902 Battery cells max 204 Battery (V) max 459

lechrichter, used,       sheet leveller, used,   Type: UBR 10 x 2000 /1-16 Manufacturer / make: WMW Gotha max. sheet width: 2000 mm max. sheet thickness ( St 50): 10 mm    min. sheet thickness / min. sheethickness: 3 mm   Number of straightening rollers: 13 rollers / rollers Directionroller Diameter/diameter of     straihgtening rollers: 145 mm Directional speed / speed of straightening: 16 m / min Bale length / convexity length of rollers: 2330 mm Center distance of directional rollers/ distance b/n rollers centers: 150 mm Support roller diameter / diameter of bottom rollers: 290 mm Number of bottom rollers 21/24 Number of supports (top/bottom): 3 /3 Lifting speed of the traverse / speed   ...

Piller UPS System UBR 420 5/5 690A 50Hz 400V, 4pcs

Straightener, straightener, VEB BLEMA GOTHA UBR 20X1600 / 1-10 sheet rolling machine. Machine for straightening sheets up to 20 mm thick and up to 1600 mm wide. The mill was hardly used because it was the second machine in the plant and served as a spare machine. Currently un-exploited. The machine is undergoing modernization, a completely new control system. The possibility of adapting to the customers needs (extension with roller feeders, receiving, the possibility of sanding rolls and rollers, etc.). Technical data : - year of production: 1983 - sheet thickness: 20 mm - sheet width: 1600 mm - upper straightening rolls: 5 pcs - lower straightening rolls: 6 pcs - rolling speed 10 m / min - engine power: 37 kW - engine power: 2 x 18.5 kW - engine power: 1,1 kW - engine power: 1,1 kW - weight: 39150 kg

Type: UBR 25 x 2000-7 / 16 Manufacturer / make: WMW Wildau Baujahr / year: 1984 max. sheet width: 2000 mm max. sheet thickness ( St 50): 25 mm min. sheet thickness / min. sheethickness: 8 mm Number of straightening rollers: 7 rollers Weight of the machine / weight: 51 t

Key data: 2000 mm, 10 mm

Sheet metal straightener, partially overhauled       sheet leveller, partly overhauled   Typ/ type:                                � �                                  � �              UBR 10 x 2000 /1-16 WDKS Manufacturer / make: WMW Gotha Year of construction/ year: 1989/2024 electrically overhauled max. sheet width: 2000 mm max. sheet thickness ( St 50): 10 mm    min. sheet thickness / min. sheethickness: 3 mm   Number of straightening rollers: 13 rollers / rollers Straightening roller diameter/diameter of     Straihgtening rollers: 145 mm Speed of straightening: 16 m / min Bale length / convexity length of rollers: 2330 mm Distance between b/n rollers centres: 150 mm Diameter of bottom rollers: 290 mm Number of bottom rollers / number of bottom rollers 21/24 Number of outr ...

Key data: 2500 mm, 16 mm

Machine type: sheet leveller Stock number: 0997 Make: WMW GOTHA Type: UBR 16 x 2500 /1-10 Year of construction: 1976 Sheet width: 2500 mm Sheet thickness: 16 mm Smallest sheet thickness: 6 mm Number of straightening rollers: 11 Roller diameter: 180 mm Straightening roller diameter: 180 mm Target speed: 10-16-20 m/min Flow speed: 10 m/min Total power requirement: 75 kW Machine weight approx.: 46 t

material width: 2000 mm material thickness: 10,00 mm no. of straightening rolls: 13 sheet thickness - min.: 3,00 mm diam. of the rolls ca.: 145 mm straightening feed: 16 m/min barrel length ca.: 2330 mm middle distance of straightening rolls: 150 mm back-up rolls ca.: 290 mm No. of supports up / down: 3/3 main drive motor: 30 kW total power requirement: kW weight of the machine ca.: 32 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. width: 3200 mm Nominal width: 3050 mm Max. thickness width: 40 mm Min. thickness width: 12 mm Max. material speed: 12 m/min Work rolls: -Units: 7 -Diameter: 340 mm Backup rolls: -Units: 5 -Diameter: 340 mm Supporting rolls: -Units: 15 -Diameter: 334 mm Diameter of feed and eccentric rolls: 380 mm Electrical motor: 132 kW Floor space: -Length: 3657 mm -Width: 5486 mm -Height: 3048 Total weight:105 tons

material width: 2500 mm material thickness: 25,00 mm no. of straightening rolls: 7 sheet thickness - min.: 8,00 mm total power requirement: kW weight of the machine ca.: 61 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Characteristics are shown in the photo Without documentation Bought at the Kirov factory in St. Petersburg.

Roller leveler VEB BLEMA GOTHA Germany Strip max thickness 6 mm, max width 1650 mm 7 + 8 work rolls, diameter 110 mm, 3 rows of supports with hydraulic setup, hydraulic unit included 27 kW AC main motor very good condition, complete and ready for operation, still on foundations in our plant

MAX 20 X 1600

UBR32x2500 sheet metal rolling mill Year of production 1969 Dismantling, transport and all related costs are the responsibility of the buyer

material width: 2500 mm material thickness: 16,00 mm no. of straightening rolls: 11 sheet thickness - min.: 6,00 mm straightening roll diameter: 180 mm straight. speed ca.: 10-16-20 m/ min bending speed: 10 m/min total power requirement: 75 kW weight of the machine ca.: 46 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 1600 mm material thickness: 6,30 mm no. of straightening rolls: 15 diam. of the rolls ca.: 100 mm total power requirement: kW weight of the machine ca.: 28 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: DRACO TYPE-4 Rollcutter , (dismantled at the beginning of October 2023) TECHNICAL DATA Construction: Riveted and screwed, aluminium Power supply voltage: ,1~230 V/50 Hz+PE Control voltage: ,24 V /DC Power supply: ,2000 W Pneumatic system pressure: 4 bar Cutting cycle: Automatic with fabric placement on given size Knife movement: Automatic Guide: 4-row ball guide without clearance,ubrication after 1000 km Knife blade: Electric circular Fabric clamp: Pneumatic , Safety switch: Foot and hand switches Optical safety barriers: The clamp will not set off if the barrier is on Start block: The knife will not set off when the fabric clamp is raised , Fabric sensor: Blade turns around automatically after cutting the fabric Backlight: Width 16 cm, wider sizes can be ordered Fabric clamp: two-side Pneumatic actuators: On left and right side Cont ...