tur used for sale

ALSO USED ON VORRAT

Element welding Turntable werkstueck drehvorrichtung

Press mould Cap for injections 40 mm Turkey widely used in the medical industry.

Double hood vacuum machine from the high quality manufacturer TURBOVAC, model SB1000LL. Its condition is of occasion equipment totally revised in its entirety (re-release) guaranteed. Built in stainless steel and anodized aluminum. The machine is ready to plug in and work with. Busch vacuum pump: 250m3/H. Final pressure: 0.5 mbar. Vacuum system: per sensor. External measurements of the machine: 1930 mm long x 1170 mm wide x 1400 mm high. Working height measurement 1000 mm. Camera dimensions: 840 mm x 820 mm x 190 mm high. Welding bar measurements: 820 mm x 4. Double welding. Weight: 700 Kg. Voltage: 380-400 V, 3 Ph, 50 Hz.

Servo controlled eccentric press line 40 Ton Press capacity 860 mm max material width

Turkish made 3000 mm x 10 mm plate rolling machine 3 rolls Maximum bending thickness : 10 mm

Turning table, s/s frame, plastic top, table diameter: ø 1220 mm, total dimensions: 1250 mm x 1250 mm x 820 mm.

Turning table, s/s frame, plastic top, table diameter: ø 1130 mm, total dimensions: 1170 mm x 1170 mm x 900 mm.

S/s turning table, Ø table: 1000 mm, total dimensions: Ø 1200 mm x 1300 mm.

S/s turning table, diameter table: 1000 mm, total dimensions: Ø 1200 mm x 1300 mm.

Mobile s/s turning table, dimensions: 1200 mm x 1200 mm x 820 mm.

Fat Tur Ø 630 x 1500 mm Distance between centers: 1500 mm Swing over bed: 630 mm Swing over cross-slide: 315 mm Number of speeds: 1800 rpm Weight: 3150 kg

CNC plasma cutting system working range: 1500 x 3000mm OTC Superplasma 12000 Cutting up to 20mm quality cutting New control ProDNC from Micompan data transfer via USB; ready to use

Long reach - flail mower for rear three point attachment, cutter head 125 cm with hammers (380 g) and bottom roller. Bowden cable control, own hydraulic system, drive via PTO 540 RPM. Range horizontal 507 cm from tractor centerline, vertically to 500 cm, tractor weight minimum 2100 kg; min. 37 kw/50 hp required (factory specifications). Other smaller long-reach flail mowers and mower technology on stock!

Voith Turbo 3-pump combination No. 170, 383114LV5-50 Type A10 VSO 100 DFE IPN 60, IPV 5-50 170

Industrial washing machine for small parts Turbex Binitron 2000, machine no. 94252, 400V 50Hz 25A, see also pictures

CNC plasma cutting system Work area: 1500 x 3000 mm OTC Super plasma 12000 Cut quality cutting up to 20 mm New control ProDNC from Micompan Data transfer via USB

Vacuum pump Magnetic suspended compound nuclear pump Manufacturer: Osaka Type: TG 2003M Pumping speed: 200 l/s

Depositor Serial: D150P511007 2003, stainless single shot depositor, rise and fall head, 25L depositor, mobile frame,

Turbo systems Model: Heat sealer pot sealer stainless frame, currently set for 32 mini pots, 30mm diameter x 25mm depth, previously used for Knoss stock pots, adjustable temp controls, Mitsubishi Go T1000 PLC

Power Plant 19 MW Titan 130 + boiler + steam turbine 16.000 hours since new in 2005 in excellent condition, as new. For immediate sale.

3x Bradley & Turton 50ton Upstroking Presses 380mm x 380mm (15”) sq platens Electrically heated platens 540mm (22”) daylight Fully guarded With individual temperature controls

Turbo systems stainless depositor Stainless height adjustable frame, 25Kg hopper with lid, variable speed, foot pedal operated,

TO WHOM IT MAY CONCERN WE VE NEW UNUSED GENUINE SPARE PARTS OF MAN NR 34S AT OUR STOCK. NEW BEARING BUSH 1151768-0353 517003 1PCS NEW LOCATING BEARING 1151768-0580 517002 1PCS NEW NOOZLK E RING IMO 3318 129.88cm3 1PCS NEW BEARING ASSY 5891812 30021F 8PCS ALL PARTS EX STOCK LOACTED AT IZMIR TURKEY. IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US .

TO WHOM IT MAY CONCERN; WE VE NEW UNUSED GENUINE SPARE PARTS OF MAN TURBO NR 34S AT OUR STOCK. NEW SET OF SPARE PARTS 1159500-0138 2PCS NEW SET OF SPARE PARTS 1191468 1PCS NEW BEARING BUSH 1191468 7PCS NEW BEARING BUSH 1151768-0442 1PCS NEW NOOZLE RING IMO 2475 128.05cm3 2PCS NEW LABYRINTH RING 1191468 2PCS NEW LOCATING BEARING 1191468 2PCS NEW LOCATING BEARING 517002 1PCS ALL PARTS EX STOCK LOCATED AT IZMIR TURKEY. IF YOU VE ANY QUESTIONS . PLS DO NOT HESITATE TO CONTACT WITH US .

CYLINDER HEADS , BEARINGS MIBA, CONRODS, VALVES INLET & EXHAUST

Detrunking machines used for cabbage and herb Manufacturer: TURATTI Type 1507-03 Built: 1998 VA stainless steel Dimensions: approx. 4200 x 1200 x 2100 mm

Inductive sensor -10-65 VDC 200 mA -Sn: 40 mm -B5MNH -Number: 10 pieces available -Price: per piece -Weight: 0.5 kg

Inductive sensor -10-65 VDC 200 mA -Sn: 100 mm -Number: 5 pieces available -Price: per piece -Weight: 1 kg

Tires, tractor tires, lawn mower tires -Tire size: 15x6.00-6 -Number: Two available -Price: per piece -Dimensions: Ø 340 mm, height 140 mm -Weight: 4 kg

Clamping clamps, pointed filing clamps, hand filing clamps, screw clamps, steel construction clamps, clamps, clamping tools -Inside diameter: 104 mm -Dimension: Ø 155/30 mm -Weight: 2.1 kg

Scaffolding Construction Plank Production Line ( Rollform ) Product width : 32 cm Product Length: From 1 meter to 5 meter Product thickness: up to 2 mm

Turkish 70 mm thickness 3 rolls plate rolling machine Machine is in excellent condition Bending length : 3000 mm Bending thickness : 70 mm Lifting system Pre bending Diameter of top roll : 700 mm PLC Control

Turkish Cut to length line 1550 X 0.40 MM -3.00 MM Full automatic 15 Ton Coil weight Encoder length measurement Automatic stacking is also available

12 inch, up to 3mm pull feature. It produces products in accordance with the dimensions that Afad wants. It is actively used. We have a sale plan for project change.

Press form Box 600400280 (meat) Wear 10-15% along the lines of closure there is a small flash

Press mould Box 600400200 (vegetable), wear 70%, part of the perforation and the closure line is filled with material.

Press form Container 20 ml used in the medical industry, wear 10%

Press mould Cover body 28mm, 5 punches need to be replaced, 30% mold wear

Press mould Cover 20 mm. (Turkey) widely used in the medical industry. It is worn on top of the bottle.

Press mould Box 600400140, 30% wear, perforation is filled with material on one side

Press mould Box 400300280 Finpack. Wear 10%, 2 piercings broken

Press mould Grating for slatted floors, Wear 10-15% broken two ejectors, can work in automatic mode when troubleshooting

Press form Vial FP-50 round, minimum wear - 5%, used in the medical industry

Press form Bottle 25 ml (bottle used in the medical industry)

Press form Bottle 100 mm, D=20 mm round, used in the medical industry, wear 10%

Press form Bottle FP-50 flat, used in the medical industry, Wear 5%, 5-cavity mold

The machine is in very good condition Control Unit: PLC with touch screen Feeding: Automatic Product can be filled: Liquid or cream, gel Filling Capacity: 10 ml to 500 ml Capacity: 700-1200 pieces per hour stainless chrome Tube closing system: Ultrasonic

Turkish made slitting line The line is in good working condition