Machine includes sump, cooling pump and documentation of the machine, control, electrical diagrams, etc. The battery has been replaced, but there are probably still a number of parameters missing that need to be set. ...

• more information

Table length: 1080 mm Table width: 580 mm Longitudinal X: 1000 mm Cross Y: 600 mm Vertical Z: 760 mm Positions ATC: 24   Positions APC: 0   CNC Brand: Heidenhain CNC Model: HeidenHain TNC 430 X - Travel:     1000mm Y - Travel:     600mm Z - Travel:     760mm Table Length:   1080mm Table Width:    580mm Table load:     1000 Feed rate X-Axis:15000mm/min. Feed rate Y-Axis:15000mm/min. Feed rate Z-Axis:15000mm/min. Spindle Taper:  40ISO/Bt/Mk Speeds / ranges:8000Rpm ATC / revolver: 24 Chip conveyor:  yes Coolantsystem:  yes Length:         3200mm Width:   ...

Stock number: 3760 LATHE Manufacturer: TRENS - TOS, Type: SN 50C - 2000 Machine NO.: 08005020060214, Year of construction: 2006 Specifications: Turning length 2000 mm Center height 250 mm Turning over bed 500 mm Ø Turning in recess 700 mm Ø Spindle bore 52 mm Ø Spindle speeds 22-2000 rpm Spindle motor power 5.5 kW Accessories: Tailstock Digital display Jenix - Ikke monteret - not mounted dkk 10.000.- Multi-tool holder Centering chuck mm Ø Universal lining mm Ø Fixed bezel mm Ø Length: 3640 mm, Height: 1540 mm, Width: 1100 mm, Weight: 1890 kg

X-travel: 1000mm, y-travel: 600mm, connected load: 32kVA, length: 3200mm, width: 2100mm, height: 2900mm, weight: 6.2t, with documentation and measuring probe, the tool changer is defective, otherwise the machine is functional, an on-site inspection is possible. ...

• more information

Used conventional lathe Brand: TRENS Model: SN 630 S Year: 1996 Weight: 3800kg Lathe data: Distance between points: 3000mm Bench turning diameter: 645mm Dump diameter on cart: 350mm Turning diameter without neckline: 880mm Reed pitch: 77mm Point: Morse taper 5 Speeds: 18 (10 up to 1600rpm) Maximum weight of clamped piece: 1500kg Includes: - 310mm TOS 3-jaw chuck with sets of interior, exterior and soft jaws - 4-claw plate 500mm - Closed rear window 140mm - Closed rear window 260mm - Quick change turrets with 5 tool holders - All accessories in the photographs - Fagor 3-axis display Complies with CE regulations. It has a com ...

Machine Details Warehouse number 1105-03598 Machine Type Machining Center - Vertical Brand VERNIER GSP TRENS Type CV 800 Year of construction 1995 Control type CNC Control NUM 1060 Storage location HAGUENAU Country of origin Czech Republic Delivery time immediately Freight base from stock, freely loaded trucks Technical details x-travel 800 mm y-travel 610 mm z-travel 508 mm Table size 1050 X 420 mm Spindle holder ISO 40 Drilling capacity in St 60 - Full drilling 45 mm Thread cutting up to M 24 Speed range - infinitely variable 6000 rpm Feeds - longitudinal/transverse/vertical 1 - 5000 mm/min Rapid traverse 20 m/min Distance spindle/table 100 - 608 mm Number of tool ...

: 0500 mm : 270 mm : 2000 mm : 250 mm : 73,5 mm : 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.  ...

• more information

Control: manual Max.turning length: 1500 mm Max swing diametr over bed: 500 mm Quick Change Toolposts:1 Coolant tank:50l 2006 Made in Slovakia ...

• more information

Machine Details Stock number 1105-03787 Machine type machining center - vertical Make TRENS Type MC 100 VA Year of construction 2000 Control type CNC Control HEIDENHAIN TNC 415 Storage location FRANCE Country of origin Czech Republic Delivery time immediately Freight base from stock, freely loaded trucks Technical details x-travel 1015 mm y-travel 610 mm z-travel 508 mm Table size 1080 x 580 mm Spindle holder ISO 40 Drilling capacity in St 60 - solid drilling 45 mm Tapping up to M 24 Speed range - infinitely variable 20 - 8000 rpm Feeds - longitudinal/transverse/vertical 1 - 5000 mm/min Rapid traverse 20 m/min Spindle/table distance 100 - 608 mm Number of tool magaz ...

machine fully functional and connected in operation, year 2006 Technical parameters: - clamping surface of the table: 1080 x 580 mm - spindle taper: BT 40 - max. table load: 1000 kg - max. speed: 8000 rpm - axis displacements: X 1016 mm Y 610 mm From 1032 mm Machine dimensions (L x W x H): 3280 x 2260 x 2950 mm Weight: 5960 kg wheel, wireless probe, Heidenain 530, tool magazine, BT 40, chip ejector, we will add a lot of BT40 to the machine After replacing and servicing the new Heidenhain system, after servicing and replacing the bearings. A similar machine as Tajmac, Kovosvit or Strojtos with a 1000mm table