Equipment / Product data of the CNC-Fraesen Type High-Z/TRex series / Type 1215 Drive: 3 busiest brand stepper motors with 4.5 amperes. Pushing through long and up to 120mm high materials possible, as no belt drive is in the way at the end of the X axis! linear guides on all axes of HIWIN / THK ! Multiple ball-bearing ball thread spindles on all axes, brand edging! speed speed max. 12,000 mm/min Working speed max. approx. 8,000 mm/min Technical platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm reverse play maximum approx. +/- 10 microns (0.010 mm) Point repeatability: approx. 0.01 mm clamping area 1860 x 1340 mm travel distances: X=1500mm; Y=1200mm; Z= 130 mm contact contactno- ...

3D CNC Router T-Rex 1215 / Technical Data : Equipment / product data CNC-milling machine type High-Z/TRex series: Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all exis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 12.000 mm/min Operating speed max. ca. 8.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table 1860 x 1340 mm Travels: X=1500 ...

Equiptment / product data CNC-milling machine type High-Z/TRex series / 1224 Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all axis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 12.000 mm/min Operating speed max. ca. 8.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table 2800 x 1340 mm Travels: X=2400mm; Y=1200mm; Z= 130 mm Non-contact ...

SHODA-CNC Router (6) main heads-(6) piggy back heads- model NC 516-1326, (2) 51x102 vacuum tables- 15M FANUC Controller, (2) vacuum pumps 7-1/2 hp. each- 1995 very low hours, ……….…………..Price-$15,000 reduced  ...

• more information

Equipment / Product data of the CNC-Fraesen Type High-Z/TRex series / Type 1224 Drive: 3 buerstenlose brand stepper motors with 4.5 amperes. Pushing through long and up to 120mm high materials possible, as no belt drive is in the way at the end of the X axis! linear guides on all axes of HIWIN / THK ! Multiple ball-bearing ball thread spindles on all axes, brand edging! speed speed max. 12,000 mm/min Working speed max. approx. 8,000 mm/min Technical platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm reverse clearance maximum approx. +/- 10 microns (0.010 mm) Point repeatability: approx. 0.01 mm clamping area 2800 x 1340 mm travel distances: X=2400mm; Y=1200mm; Z= 130 mm contact ...

Extraordinary precision Milling, engraving or cutting is possible with the highest precision, due to the high-quality inclined toothed racks installed on each axis. Ideal for processing plate material With the large machining area, the T-Rex is the best possible choice for milling plate materials, as well as for text or image engraving on 2D, 2.5D or 3D workpieces. Thanks to a assembly aid on the short side of the CNC milling machine, the work surface can be ideally and comfortably equipped with the plate material. The ball rollers allow an effortless glide of the plates. External dimensions LxWxH: 3780x2850x1950 mm Weight: circa 1950 kg Clamping surface XxY: 3030x2020 mm  ...

Cnc-Takang Lathe Fanuc control unit 2008 8 inches Swing over Bed Ø 460 mm (18.1) Swing over cross slide Ø 280 mm (11) ...

• more information

: mit Absaugvorrichtung frequency: 60 Hz The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.  ...

• more information

Plasmacutting machine for plates amp; tubes! Type: MG 12001.35PPr + CH1200PP 2 plasma cutting heads Hypertherm HPR130 powersource Esab Kjellberg Fine Focus 800 powersource  ...

• more information

WYPALARKA PLAZMOWA MODEL MTX 2000/4000 Konstrukcja: stal+aluminium Wymiary całkowite: 4600/2700/1400 Pole robocze: 4200/2200/1400 Napęd osi XY obustronny napęd bramy: silniki krokowe 4Nm z przełożeniami, listwy zębate klasa dokładności 8 Napęd osi Z: silnik krokowy śruba kulowa Prędkość przejazdowa: do 25m/min Układ kontroli osi Z: THC My plasm system Układ kolizyjny, zabezpieczający palnik przed uszkodzeniem Prowadnice liniowe: TBI Automatyczny układ wykrywania materiału Zasilanie: 240V Dopuszczalne obciążenie: 1700kg Masa całkowita: 1200kg netto W ZESTAWIE: - pulpit sterujący -stół wodny -ruszt wymienny -program sterujący w języku niemiec ...