We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
122,047 used machines on RESALE, but how to find them? Machine Search
used
Libra for 200 litre cutter wagons, made by Tornado & Krug, in a very good used and functional condition. Weighing terminal Systec IT 1000. Completely made of stainless steel. Dimensions B/D/H 110/80/80 cm. Operating voltage 230 volts. Workshop-tested, ready for immediate use, further on request.
used
The machine is in good technical condition, after prior agreement it is possible to test it.
used
Hammer mill Tornado THM 90 A for waste grinding Power 15 kw Hopper with reel, dosing screw, control box Complete with all attachments Good condition
used
Wide belt sander with combi unit Max. working width: 910 mm. Max working thickness: 160 mm dimensions of sanding belt: 1900 x 930 mm Panel transport by belt, 2 feed speeds, 4,5 / 9 m/min Equipment: Combi unit with single belt over roller and pad, roller 85? Shore, motor 11 kW electro magnetic break main motors
used
Table sizes: 3000 x 850 mm. Motor: 3 kW Belt sizes: 150 x 7800 mm. Motorised height adjustment
used
Battery charging cabinet, battery, emergency power battery, emergency power battery, emergency power system, power supply system, lead battery, lite battery -Manufacturer: Scott, battery for Tornado Powered Respirator -Quantity: 2x battery available -Price per piece -Dimensions: 145/65 / H90 mm -Weight: 0.8 kg
used
Gear motor, electric motor, three-phase motor, gate drive, roller shutter drive, sectional door drive, electric gear motor, -Speed: 13 rpm -Power: 0.07 kW -Construction: B3 -Shaft: Ø 14 x 23 mm -Dimensions: 225/170/H180 mm -Weight: 6.1 kg
used
Used Tornado flowpack. The device produces pillow-type packaging made of flexible material (foil). The products are manually placed between the pushers of the feeding conveyor, which moves the products through the forming compartment to the sealing compartment, where the packaging material is sealed lengthwise, through sealing wheels and then transversely by sealers. An unloading conveyor located at the end of the sealing compartment transports the packaged products. Dimensions: - width 10 – 280 dm - length 100 - 500 cm - height 90 cm - capacity: 40 meters of foil per minute - power supply: 400 V 50 Hz
used
With a long-dwell, continuous-flow, transverse-sealing system, the Tornado LD reaches packaging speeds of up to 100 packages per minute while delivering hermetical seals. The cantilevered construction houses the mechanical and electrical components at the rear of the machine in separate and protected areas. The sealing units and conveyor surfaces are housed at the front. The machine face is therefore free from obstacles and can easily be cleaned, preventing production waste from coming into contact with mechanical and electrical parts. The Tornado LD brings high performance levels, reduced maintenance, and is built with top-quality materials and components. These machines are built to last. Power supply: 3x400V Power: 3.5 kW Production year: 1998
used
PFM S.pa. flowpacker, model: TORNADO BB LD, serial number: C.6561, year of construction: 2002, 380 V, 50 Hz, 33.5 A, 19.5 kW, weight: 1680 kg: s/s rollers, roller width: 240 mm: plastic belt, belt width: 150 mm: seal length: 220 mm: dimensions roller conveyor: 2750 mm x 600 mm x 1420 mm: dimensions flowpacker: 5700 mm x 1150 mm x 1750 mm: dimensions film holder: 3350 mm x 1050 mm x 1050 mm: dimensions switch cabinet: 1700 mm 620 mm x 2380 mm: Including 2 mobile suction devices for rest films, dimensions: (2x) 500 mm x 500 mm x 1150 mm. Including s/s platform, dimensions: 1600 mm x 600 mm x 350 mm.
new
High-pressure cleaning device, high-pressure rinsing, high-pressure washer on hot-dip galvanized and painted high-quality steel frames with forklift slacks. PTC Tornado 60/200, 75/150, 75/210, 84/190 and 102/150 similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Tornado 60/200 | 60l/min. at 200bar | Engine: Kohler KDW 1404 26kW Tornado 75/150 | 75l/min. at 150bar | Engine: Kohler KDW 1404 26kW Tornado 75/210 | 75l/min. at 210bar | Engine: Kohler KDW 2204 37.5kW Tornado 84/190 | 84l/min. at 190bar | Engine: Kohler KDW 2204 37.5kW Tornado 102/150 | 102l/min. at 150bar | Engine: Kohler KDW 2204 37.5kW DIMENSIONS / WEIGHT: Dimensions and weight with 680l water tank LxWxH: approx. 2.300x1.310x1.310 mm, approx. 640 kg Dimensions and weight with 1000l water tank LxWxH: approx. 2.300x1.310x1.630 mm, approx. ...
used
Thread cutting machine make REMS type Tornado 2000Fabr. -No: 34022697for the efficient production of pipe and bolt threads, thread cutting, cutting off, deburring, nipple cutting in the workshop and on the construction siteTechnical specifications:Pipe thread size: 3/8 - 2 Speed: 60 rpm.Power connection: 220 V, 50 HzDrive power: 1200 WExternal dimensions L x W x H (without basement): 730 x 435 x 280 mmWeight of the machine without accessories: 31 kgWith- foot switch- thread cutting head- pipe cutter- pipe support- deburrerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
CNC plasma cutting system working range: 1500 x 3000mm OTC Superplasma 12000 Cutting up to 20mm quality cutting New control ProDNC from Micompan data transfer via USB; ready to use
used
CNC plasma cutting system Work area: 1500 x 3000 mm OTC Super plasma 12000 Cut quality cutting up to 20 mm New control ProDNC from Micompan Data transfer via USB
used
Description Tapping machine Rems Tornado Type 2010 220V, 50Hz Second-hand machine Tapping machine for pipe threads (1/16) 1/8 – 2", 16 – 63 mm, Bolt thread (6) 10 – 60 mm, 1/4 – 2". With maintenance-free gearbox, safety foot switch with emergency stop, 2 automatic chucks, automatic lubrication cooling. With tool set, consisting of a universal automatic cutting head for all threads, also long thread, automatically opening, with automatic thread length for tapered threads, cutting jaws for pipe threads tapered ISO 7-1, EN 10226 (DIN 2999, BSPT) R 1/2- 3/4 and R 1 – 2 right, pipe cutter, internal tube deburring device, pressure lever. Height-adjustable material support. Pole-changing capacitor motor 230 V, 50 Hz, 2100 W. 52/26 min-1, also under full load. Very quiet running. Portable, 3 tubular legs, roller support
used
Rotary hammer, chisel hammer, combination hammer, Bosch hammer -Nominal consumption: 650 W -Mains connection: 230 V -Drill -Weight: 15 kg
used
thread dia.: 1/16 - 2 threading length: 165 mm thread pitch: mm turning speed range: 40 - 53 U/min voltage: 230 V total power requirement: 1,7 kW weight of the machine ca.: 50 kg dimensions of the machine ca.: 1,10 x 1,10 x 1,10 m - Serial-No.: 34024750 - foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
PFM Flow wrapper Model: Tornado-BBLDSS Serial: C-6096 2001, Stainless, The Tornado LD is a horizontal flowrapping machine that produces up to 100 packs/min with hermetic seals from a flat reel of heat seal wrapping material. The Tornado LD is specifically designed for M.A.P.” (Modified Atmosphere Packaging). with smartdate X40 coder, infeed length 2400mm, flow wrapper length 3200mm, jaw width 220mm, various belt for infeed, 3Ph
used
Used flow wrapper PFM; Type: Tornado LD SS S Horizontal flow wrapper for gas-tight packs for M.A.P. applications. El. Connection : 380 V, 50 Hz, 17.3 A, 9.7 kW Net weight: approx. 1,800 kg Further data on request. Visits and test runs are possible by arrangement.
used
Machine Details Stock-No. 1105-03856 Type of machine CNC Lathe Make COLCHESTER Type TORNADO T 6M Year of manufacture 2006 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Great Britain Delivery time immediately Freight basis EX WORK Technical details turning diameter 440 mm turning length 450 mm control FANUC 21 ITB total power requirement 15 kW Weight of the machine approx. 4 t Additional information NICE COLCHESTER T 6M FROM 2006 FANUC 21 ITB CUCK TAILSTOCK SWARF CONVEYOR VDI 30 TURRET 12 P LIVE TOOLS BARFEEDER MBF 1000 INCLUD
used
Manufacturer: Biesse, Type: Tornado S 1300, Year: 1998, Control: Progrann, Work piece length max mm: 3000, Work piece length min mm: 300, Werkstückbreite max mm: 1300, Number of stacks: 2, Taktleistung ca.: 12, Compressed air bar: 6, Total power kW: 20, Number of sucking lines: 2, Feeding speed max m/min: 25, Feeding speed continous adjustable: yes, Erection in a pit: no, Wight approx. kg: 6000, Year :1998
used
OTT Tornado - TOP Control - via a 15-inch colour touch monitor for full automation and maximum ease of use CM-CombiMelt gluing system Suitable for the processing of EVA and PUR hot melt adhesives as well as all common cleaning granules Joining machining part for attaching chipboard Automatic Roller Magazine Automatic Edge Magazine Double cross-cuter, automatic swivel 0° / 3° Flush milling machine - for flush milling - 12mm Fine milling machine RADIUS - Radius milling - Profile knife R2 - R5 Automated Copy Milling - Corner Rounds Scraper Device - Radius Surface Scraper Device Lubricant Spray Device - PU Cleaning set with fine buffing device very stable workpiece support with roller conveyors - FRONT with scissor pull-out Complete tooling included First delivery 2012 Machine is WORKSHOP OVERHAULED in TOP CONDITION
used
General SKU046C162 LocationBarneveld MakeSharples-Stokes / Pennwalt France TypeTornado Mill 44F No.80 01 Year of construction1980 Specified Features - Hammer Mill Material finishMirror polished Main Features Motor4 KW Inlet diameter250 mm Width120 mm Hammer Mills MaterialStainless steel Hammer mill(1x) Rotor sizedia. 250x120mm Fixed hammerscheck With sieve cage(± 20x20mm) Inletdia. 145mm Motor4,0 KW, 380 Volt Speedmax. 5200 Rpm Information Mounted on framecheck Mounted on wheelscheck With switchcheck Floorspace1,2x1,0 M Total height1,8 M Weight300 KGHammer MillsSharplesMills > Hammer MillsBrand > Sharples What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld ...
used
Tapping machine for pipe threads (1/16) 1/8 - 2", 16 - 63 mm, Bolt Thread (6) 1 - 6 mm, 1/4 - 2" With mobile base frame approx. 100 kg
used
2001, Stainless, The Tornado LD is a horizontal flowrapping machine that produces up to 100 packs/min with hermetic seals from a flat reel of heat seal wrapping material. The Tornado LD is specifically designed for M.A.P.” (Modified Atmosphere Packaging). with smartdate X40 coder, infeed legth 2400mm, flow wrapper length 3200mm, jaw width 220mm, various belt for infeed, 3Ph
used
Inv. Num. : 5122 Type: Tornado Producer: BMF Created: 2018 Parameters: Hours: 2964 h Switch-on hours: 1485 h Throwing wheel: 231 h Max. workpiece diameter: 250 mm Maximum filling volume: 30 l Throw wheel force: 2.2 kW Maximum spindle speed: 9000 1/min Quantity: 12-15 pieces Maximum workpiece weight: 90 kg Machine dimensions: 1500x1500x2000 mm Weight: 900 kg Equipment: Filter system with separation Universal Tool Holder 14 positions of planetary gears Components - Impellers
used
swing dia.: 440 mm max. turning diameter: 220 mm turning length: 450 mm travel -x axis: 200 mm control: Fanuc 18i-TB max. helix angle: 60 ° spindle bore: 64 mm tool taper: VDI 30 numbers of positions in the tool changer: 12 CNC Lathe | COLCHESTER - TORNADO T6MS equipped with counter spindle and chip conveyor. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: T6 MS | T6-MS | T 6MS | T-6MS | T-6 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
max. swing diameter over bed: 510 mm max. turning diameter: 260 mm Max. Turning length: 540 mm travel -x axis: 240 mm center height over bed: 260 mm control: FANUC 21i-TB spindle bore: 77,5 mm no. of tools in turret: 12 x tool taper: VDI 40 CNC Lathe | COLCHESTER - TORNADO T8 The machine is in good condition. Please refer to further technical details in the attachement of the offer. A machine video will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: T 8 | T-8 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
swing dia.: 606 mm max. turning diameter: 170 mm control: FANUC 31i-A travel -x1 axis: 195 - 205 mm travel -y1 axis: 80 (+/- 40) mm travel -z1 axis: 583 mm travel -x2 axis: 153 - 163 mm spindle bore: 64 mm number of spindle speeds: 6.000 U/min Automatic tool changer with driven tools: 12 Stk. / pcs. tool taper: 30 VDI CNC Lathe | COLCHESTER - TORNADO T8MS Twin Turret The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TT-6MS | TT 6MS | TT 6 MS | TT-6 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Emco Emcoturn 332 Mc 2 Spindle Ve Taret C Eksen Cnc Torna Ve Çub 2 Spindle 2 turret C axis Chip conveyor Bar feeder(LNS) Maximum turning diameter :140 mm Maximum workpiece length: 580 mm
used
One used 7730 KVA GEC Alsthom 11KV AC generator( generator end ) for sale. The alternator is in a very good running condition. He was driven by a Siemens Tornado gas turbine. The location is our warehouse in solingen, germany. generator end: GEC Alsthom typ: CG710G2000U voltage: 11.000V powerrating: 7730 KVA rpm: 1500 r/min manufactured: 1991 weight: 19,5 T price on request
used
Two used 8110 KVA Syncronous A.C. 11KV generators( generator end ) for sale. The alternators is in a very good running condition.It was driven by a Siemens Tornado gas turbine. The location is our warehouse in solingen, germany. generator end: Synchronous A.C. Alstom Type: CGS710N2240U voltage: 11.000V electrical power: 8110 KVA rpm: 1500 rpm Year of construction: 1999 Weight: 17t Price on request Here you can download the generator pictures (4 MB): abc.stromerzeuger-discount.de/Alstom-Generatoren/P140796-10.zip
used
Turning diameter: 170 mm Turning length: 0 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 21 i-T MACH - ID 6098 Make:COLCHESTER Type:TORNADO A50 Control:Fanuc 21 i-T YOP:2000 Max. turning Ø 170 mm X-Axis 350 mm Z-Axis 210 mm Spindle bore 54 mm Speedrange 6000 Rpm Spindle power 5,5 kW ATC / revolver 12 x Vdi 30 Control Fanuc 21 i-T Chip conveyor Yes Large tooling package VDi 30 Bar feeder L = 1000 mm Dimensions Length 6.000 mm Width 2.100 mm Height 1.900 mm Weight 2.800 kg
used
Thread edge with extensive accessories, by hand or automatically to use. Table model, mobile also for the construction site Manufacturer GF Georg Fischer Table model with electric drive or by hand. Automatically opening thread cutting head Threaded jaws for: 1/2 inch, 3/4 inch, 3/8 inch, 1 inch, 1 1/2 inch, 2 inch Machine in transport box (steel) Rems Tornado Klauke Rothenberger Supertronic Special price
used
Part No.: 950 024 014-02 Ser. No.: 706DGY00306 Counter: 220,000 sheets Sheet length up to 72 cm Whether brochures in A4 landscape format, posters, banners or six-page folded leaflets in A4 format, the BDT VX370 feeder ensures the efficient production of numerous printed products. In addition, the feeder can handle a very wide range of media types (60 to 400g/m²) by using the patented, vacuum-free Tornado media handling technology. This unique lifting and transport mechanism ensures reliable handling of paper, cardboard, plastic, foil and other substrates. The storage of repeat jobs is also possible with the BDT VX370 and thus supports productivity and reduces set-up times. The VX370 feeder supports print service providers who need a high-volume feeding solution to handle a wide range of different sheet sizes and banner media with excellent application flexibility.
used
x-travel: 560 mm y-travel: 410 mm z-travel: 510 mm Control: PC-Fusion-CNC 640M table surface area: 900 x 410 mm workpiece weight max.: 500 kg tool taper: SK 40 spindle turning speed range: 12000 U/min feed range: 1 - 8000 mm/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Used in 1-shift operation (prototyping). Operating hours: 15000 h - CNC control Mazatrol PC-Fusion-CNC 640M - 30-station ATC - Air blow device on the spindle - Niagara cooling / flushing system 100 L / min. - Cooling through the spindle 15 bar - Coolant tank: 200 L - Chip conveyor - 3 lamps to indicate machining status - Automatic switch on/off including warm-up function - CNC option package Performance EIA/ ISO - Synchronous tapping, spiral interpolation, Mazak Tornado Tapping, etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Tank Agitator, IBC Mixer, Liquid Filtration, Inotec, Visco Jet, Used Machine Manufacturer: Inotec, Visco Jet Type: VJ350.030ex Year: 2003 Dimensions: 1100 x 900 mm Material: Stainless steel Tank Mixer: For IBC tanks with a 150 mm opening Special VISCO JET® "Tornado" mixing element with an effective diameter of 650 mm Stainless steel crossbar with lifting brackets or aluminum crossbar Available with a 1.5 kW power drive Individual speed control for every mixing task VISCO JET® mixing element for low, medium, and high viscosity media
used
Thermal Laminating machine / Film to sheet - single sided Make Lamtex Model Ti76 Year 2001 Max size 760 x 1020 mm Materials 90 - 450 grams Speed up to 8.000 sheets an hour or up to 65 meters per minute Feeder HTB Tornado suction feeder Heating system water heated drum with Regloplas P140 smart (2017) Sheet seperation by mean of cut and tear Details 1 Spare lamination roller, suction tapes in feeder, jogger delivery Vacuum pump currently by Venturi, but we have also dedicated pump availalble on request
used
x-travel: 250 mm y-travel: 200 mm z-travel: 90 mm control: 5D HSC 6000 A-axis: +/- 180 ° b-axis: +25 -15 ° spindle turning speed range: 40.000 U/min tool taper: HSK 25 E min./max workpiece dia.: 3 - 10 mm tool change unit: 7-fach total power requirement: 7 kW weight of the machine ca.: 0,85 t dimensions of the machine ca.: 0,78 x 1,85 x 1,165 m The machine for dental use - suitable for metal, plastic, wood and zirconium blanks - 5 axes simultaneously - Milling spindle HFS 201 quick-change (has been overhauled) - High-frequency spindle HFS 301 quick-change (5,000-40,000 rpm, 3000 watts) - Additional tool change magazine with 14 places (linear pick-up system with collision protection) - Tool length scanning - Control software on Windows XP Professional: Adoption of DIN 66025 commands (G-code) - W.Loader workpiece changer for up to 30 blanks - Max. height of blanks: 25 mm - Extraction un ...