tomate used for sale

Tom Chandley Compacta deck oven Serial: 20C18AA02 2020, Stainless three deck oven, HMI touch screen controls for all decks, 15.6Kw, chamber sizes 900mm L x 750mm W x 200mm H, mobile, 3Ph

USED GEA TOMATO PASTE PASTEURISER 1400 LPH FOR SALE Item #: Usm-190 Category UHT Plants Gea tomato paste pasteuriser 700-1400 LPH, Year of manufacturing 2013, Tubular type, Indirect heat treatment, Suitable to feed 1 separate filling machine, Product Information for Tomato paste: max. viscosity 10 cp / 10°C max. 24-26 Brix° Plant condition: Excellent

NAKAMURA-TOME SUPER NTM3 CNC turning centre was manufactured in 2004 in Japan. Distinguished by its wide machining capabilities and extensive equipment, the machine allows fully automated production processes, while maintaining high precision and reduced operating costs. The high-quality construction additionally effectively dampens any vibrations and ensures maximum process stability, which results in excellent turning results. Workpieces are machined in up to 11 axes using reliable tools stored in three 24-position tool heads. The NAKAMURA SUPER NTM3 CNC lathe is offered with an extensive range of equipment including a BREUNING IRCO SiMag bar feeder, a FANUC 16i-TB CNC controller and additional toolholders. The CNC dual-spindle lathe weighs 12000 kg. Technical specifications of the NAKAMURA-TOME SUPER NTM3 CNC lathe - number of axes: 11 - CNC control: FANUC 16i-TB - number of  ...

This Nakamura-Tome WT-100 MMY Lathe was manufactured in the year 2018 and has 18000 production hours. It is equipped with a Nakamura-Tome control unit.

This NAKAMURA-TOME TW-20 lathe was made in the year 2003 in Japan. It is equipped with a Nakamura Tome LUCK-BEI control unit and has 2 axis. The machine has 2 spindles and a max. turning diameter of 270 mm.

Manual Blistering Machine TOMMY NIELSEN 501 FSX Year: 11-12-2009 CE Marked: YES Model: 501 FSX Voltage: 3x400/230V Frequency: 50 Hz kW: 3.5kW Bar: 7.0 Serial No: 20091102 Format: -11.8cm x 27.5cm -19 cm x 27.5 cm -2x (11.5cm x 12.2cm) below Price: 12500 eur (FOB)

Nakamura Tome Super-Mill WY-250L CNC Multi-Axis Turning/Milling Center Age : 2012 FEATURES: FANUC 31I-A CNC CONTROL DUAL OPPOSED SPINDLES WITH C-AXIS UPPER & LOWER TURRETS WITH Y-AXIS LIVE MILLING ON BOTH TURRETS CHIP BLASTER LNS QL SERVO S3 BAR LOADER CHIP CONVEYOR SPECIFICATIONS: DISTANCE BETWEEN SPINDLES 47.24" MAXIMUM TURNING DIAMETER 8.9" MAXIMUM TURNING LENGTH 35.8" X-AXIS TRAVEL, X1/X2 6.3" / 6.5 Z-AXIS TRAVEL, Z1/Z2 35.8" BAR CAPACITY 1” MAIN SPINDLE: MAIN SPINDLE SPEED 3500RPM MAIN SPINDLE MOTOR 25 HP MAIN SPINDLE BORE 2.6" MAIN SPINDLE NOSE A2-8 C-AXIS ROTATION 0.001 DEGREE SUB-SPINDLE: SUB SPINDLE SPEED 4500RPM SUB SPINDLE BORE 2" SUB SPINDLE MOTOR 20 HP SUB-SPINDLE NOSE A2-6 C-AXIS ROTATION 0.001 DEGREE B-AXIS TRAVEL 37.2" UPPER & LOWER TURRETS: DRIVEN TOOL SPEEDS 6000RPM DRIVEN TOOL MOTOR 7.5 HP Y-AXIS MOVEMENT 4"/2" EQUIPPED WITH: FA ...

Nakamura Tome WT-300 Multi Axis CNC Turning & Milling Center Age : 2007 FEATURES: FANUC 18I-TB CNC CONTROL TWIN 24-STATION TURRETS WITH MILLING TWIN OPPOSED SPINDLES C-AXIS BOTH SPINDLES Y-AXIS UPPER TURRET LNS QL SERVO S3 MAGAZINE BAR FEED CHIP BLASTER HIGH PRESSURE COOLANT SPECIFICATION: MAXIMUM SWING 9.84" MAXIMUM TURNING DIAMETER 10.62" MAXIMUM TURNING LENGTH 30.71" DISTANCE BETWEEN SPINDLES 43.3" BAR CAPACITY 2.5" MAIN SPINDLE: MAIN SPINDLE SPEEDS 45-4500RPM C-AXIS ROTATION 0.001 DEGREE MAIN SPINDLE BORE 3.15" MAIN SPINDLE MOTOR 25 HP MAIN SPINDLE NOSE A2-6 COUNTER-SPINDLE: SUB SPINDLE SPEED 4500RPM C-AXIS ROTATION 0.001 DEGREE B-AXIS TRAVEL 33.46" SUB SPINDLE BORE 3.15" SUB SPINDLE MOTOR 25 HP SPINDLE NOSE A2-6 UPPER & LOWER TURRETS: NUMBER OF TURNING STATIONS 12 EACH NUMBER OF ROTARY TOOL STATIONS 12 EACH ROTARY TOOL SPEEDS 3600RPM ROTARY TOOL MOT ...

This NAKAMURA-TOME TW-20 Lathe was made in the year 1995 in Japan. It has a net weight of 6500 kg.

This NAKAMURA TOME WT 250 Lathe machine was manufactured in the year 1999. It is equipped with a FANUC Series 18i-T Control Unit. Drilling and milling work possible over the entire circumference with one clamping. The tools and holders for driven tools are not included in the scope of delivery.

This NAKAMURA-TOME TW-20MM Lathe was made in the year 1988 in Japan. It is equipped with a FANUC O-TC2 control unit, a bar feeder and has 2 axis. See more details about tech specs and dimensions in PDFs (English) attached.

This Tomelleri Engineering Space - 6 Axes Coordinate Measuring Arm was made in the year 2018. It has a measuring field of 1800.

Code: N0200 Brand: TOMAR Model: COMO Closable double cross drying trolley for drying paints, panels, mouldings, frames, various materials Min distance between uprights mm 450 Max distance between uprights mm 3150 Length of arms per side mm 700 Useful gap between arms mm 120 N° 22 Pvc-coated shelves Load capacity kg 300 N° 4 swivel wheels for handling (2 with blocking) Handle for handling Overall dimensions: Trolley closed mm 1500 x 750 x 1900 h - Trolley max opening mm 1500 x 3350 x 1900 h Overall dimensions for transport: mm 1500 x 750 x 1900 h Weight kg 115

swivelling range: 250 mm max. working diameter: 210 mm max. working lenght: 555 mm control: Fanuc 18i TB spindle taper: JIS A2-6 spindle diameter: 71 mm number of spindle speeds: 5.000 U/min CNC Turning- and Milling Center | NAKAMURA TOME - WT-250 MMY equipped with bar loader (Profimat) Equipment/accessories: - Bar loader - driven tool holders Further technical data: - Chuck size: Hainbuch collets - Distance between spindle end faces: 555 mm - Max. outside diameter for bar material: 65 mm - Spindle power 1 = 11 / 15 kW - Spindle power 2 = 7.5 / 11 kW - Max. torque: Nm 265 (kgf-m 27) The machine is in a well-maintained condition and can be inspected at any time under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: WT-250MMY | WT 250MMY | WT250MMY The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 5431 Type: HNTA 3150/10 Producer: Tomášek Created: 2015 Parameters: Maximum cutting length: 3150 mm Maximum cutting thickness: 10 mm Minimum sheet thickness when cutting: 1 mm Total power requirement: 22 kVA Machine weight: 11.5 t

spindle passage: H: 65 / G: 51 mm numbers of positions in the tool changer: 2x12 control: FANUC 18i-T tool taper: BMT55 collet chuck: Hainbuch (RD65) CNC Turning- and Milling Center | NAKAMURA TOME - WT-250 MMY equipped with tool changer and measuring system. Equipment/accessories: - parts gripper - small package of tools (2x radial & 2x axial driven tools + various passive holders) The machine is in a well-maintained condition. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: WT-250MMY | WT 250MMY | WT250MMY The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rated press force 400 kN Impact stroke 8-95 mm Stroke stroke number 70/142 /min Impact adjustment 60 mm Table area 660x530 mm Impact surface 400x250 mm Recording 3-4 kW Compressed air operating pressure 0.6 Mpa

Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0   Number controlled axis: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC Operating hours: 2330 Technical data Number of spindles: 2 Number of revolvers: 2 Distance spindle nose: 250 - 870 mm Maximum turning length: 160 mm Max. turning diameter: 130 mm Turret carriage: Carriage 1: Longitudinal travel (Z-axis): 200 mm Longitudinal travel (X-axis): 180 mm Transversal travel (y-axis): +/-30 mm Carriage 2: Longitudinal travel (X-axis): 180 mm Cross travel (z-axis): 620 mm Y axis: +/-30 mm Number of positions turret 1: 12 Number of positions turret 2: 12 Driven tools turret 1: 6 Driven tools turret 2: 6 Spindle speeds: 3600 rpm Power of driven tools: 3.7 / 2.2 kW Main spindle: Internal spindle diameter: 42 mm Spindle speeds: stepless up to: 5500 rpm Spindle power: 7.5 kW Back spindle: Spindle hole: 40 mm max. sp ...

Turning diameter: 190 mm Turning length: 800 mm Turret positions: 24 Positions ATC: 0   Number controlled axis: 0   CNC Brand: Fanuc CNC Model: NT-IPS CNC MACH-id   5187 MAKE        Nakamura TYPE          WT 150 - II YOP            2016 SPECIFICATIONS Max. turning diamter Ø  190 mm DBC Turning length      800 mm C-Axis        360.000 ° Main Spindle speed       5000 Rpm ATC / revolver      24 Speed live tools       6000 Rpm Power live tools       5.5 kW Control               FANUC NT-IPS CNC Chip conveyor        Yes Tool eye    Yes Hours      3300 H Sub spindle power  ...

Turning diameter: 190 mm Turning length: 970 mm Turret positions: 12 Positions ATC: 0   Number controlled axis: 0   CNC Brand: Fanuc CNC Model: 18 iTB MACH-id    5186 MAKE         Nakamura Japan TYPE           Super NTJ YOP             2011 SPECIFICATIONS Max. turning diamter Ø    190 mm DBC Turning length        970 mm C-Axis       360.000 ° Spindle bore     65 mm Main Spindle speed      4500 Rpm ATC / revolver       12 Speed live tools     4500 Rpm Power live tools      15 kW Control        Fanuc 18i TB Chip conveyor       Yes Tool eye     Yes B Axis    -182  ...

Control Fanuc 18 TB Turning diameter 165 mm Turning length: 200 mm X-axis 2x195 mm Z-axis 265 (B 780) mm Bar passage 50 mm C-axis 0,001 degr. Turning speeds: 50-5000 U/min Tool turret with 12 work positions 2x12 Chip conveyor INCLUDED Bar feeder Hatec can be purchased separately (please inquire) 2 Units available for sale!

serial number: 31302 control: Fanuc with double spindles: turning diameter: max. 600 mm x-travel: 1000 mm with magazine: extensive accessories: ca. 100 Aufnahmen, auch angetrieben weight of the machine ca.: 13 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Nominal force 400 kN Stroke rate - 70/140 / min Motor 3/4 kW Exploitable stroke - at constant. Clutch brake temperature 50/45/min Capacity - material thickness 4-6.4 m - with single strokes, 2-3.2 mm - with continuous stroke Table 660 x 530 mm, table top 650 x 515 x 75 mm Stroke adjustment - 10-125 mm, Dimensions 1250 x 1600 x 2370 mm - High , Btto 4500 kg Reconditioned machine - warranty 9 months from delivery date

Machine in good technical condition, currently disconnected. Maximum cutting length: 3150 mm Maximum cutting thickness: 10 mm Minimum sheet cutting thickness: 1 mm Total power consumption: 22 kVA Machine weight: 11.5 t

X-travel: 700mm, y-travel: 250mm, z-travel: 1125mm, B-travel: 1100mm, number of axis: 6, controls: NT Smart X, connected load: 90kVA, length: 4460mm, width: 2670mm, height: 2615mm, weight: 17t, operational hours counter: 18,177h, an inspection is possible.

Description: Max. panel width 3200 mm Max. panel length 1300 mm Max. panel stack height from the ground 1600 mm Lifting capacity 70 Kg Work capacity 20 Cycles/min Movement system suction cups Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

Description: Max. panel width 1300 mm Max. panel length 3500 mm Max. panel stack height from the ground 1600 mm Lifting capacity 70 Kg Work capacity 20 Cycles/min Movement system suction cups Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

Computer tomograph Manufacturer: Wenzel Type: exaCT M150 HE Year of construction: 2009 General overhaul 2017 Operating hours: 200 New tube New detector Applications: Measurement and testing technology of small to medium-sized components. The exaCT M is particularly suitable for non-destructive testing (NDT) of plastics, light metals, composites and multi-materials.

Sheathed thermocouple with connection head GÜNTHER 20-TOM 20-20301744-0800.E Measuring range: -20 - 1000°C Thermocouple: 2x NiCr-Ni/K Sensor length: 760 mm Sensor diameter: Ø 6 mm Thread: 1/2 inch Material (sensor and thread): Stainless steel Dimensions ( connection head ) 120 x 83 x 124 mm New ! Dimensions: 920 x 120 x 90 mm

Sheathed thermocouple with connection head GÜNTHER 20-TOM 20-20301744-0800.E Measuring range: -20 - 1000°C Thermocouple: 2x NiCr-Ni/K Sensor length: 760 mm Sensor diameter: Ø 6 mm Thread: 1/2 inch Material (sensor and thread): Stainless steel Dimensions ( connection head ) 120 x 83 x 124 mm used, tested ! Dimensions: 920 x 120 x 90 mm

Sheathed thermocouple with connection head GÜNTHER 20-TOM 20-20101744-0800.E Measuring range: -20 - 1000°C Thermocouple: 2x NiCr-Ni/K Sensor length: 760 mm Sensor diameter: Ø 6 mm Thread: 1/2 inch Material (sensor and thread): Stainless steel Dimensions ( connection head ) 83 x 70 x 85 mm New ! Dimensions: 890 x 70 x 90 mm

Sheathed thermocouple with connection head GÜNTHER 20-TOM 20-20101744-0800.E Measuring range: -20 - 1000°C Thermocouple: 2x NiCr-Ni/K Sensor length: 760 mm Sensor diameter: Ø 6 mm Thread: 1/2 inch Material (sensor and thread): Stainless steel Dimensions ( connection head ) 83 x 70 x 85 mm used, tested ! Dimensions: 890 x 70 x 90 mm

Clamping angle, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Tombstone: with T-slots, heavy duty -Material: cast iron -Groove width: 20 mm, groove distance 69 mm -Dimensions: 245/165/H130 mm -Weight: 15.1 kg

Overview of the equipment of a sorting plant, year of construction 2009, extension 2015, with a sorting capacity of 25,000 t/year For sale is a complete sorting plant for deinking paper, which can also be used for other materials. The plant consists of the following components: 1 piece feeding / dosing bunker with hydraulic moving floor and dosing drum, manufacturer Hartner, type Storage HAT 1 piece 3-deck ballistic separator, manufacturer Hartner, type Paper Sort 2 pieces overband magnetic separators, manufacturer IFE, type MEQL 1401 S-PS 2 pieces cascade screens (vibrating screens), manufacturer IFE, type SM 2400 x 5000 F - UW30 2 pieces TiTech Autosort, manufacturer TOMRA Sorting GmbH, type TITECH AutoSort 4 (NIR1-VIS) (S-2800) (X-L), incl. accelerating belts 1 piece sorting cabin with filter system, air-conditioned (heated), with 3 sorting belts and 10 sorting stations 1 piece ventil ...

Picker Rad View--Tomo with the following device components: generator Rad View 65 tube Dunlee DU 304 C004-30 0,6/1,2_year of manufacture 2004 vertical stand Pausch • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipment in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • The sales take place as "used" to resellers or distributors, despite full functionality without warrenty/guarantee. • Installation and commissioning must only be performed by specialist staff with the appropriate qualifications.

Nakamura Take WT 300 MMY. 2 turrets. 2 twin heads. 9-axis controlled turning and milling center. Facing headstock machine. Upper turret with Y axis with +- 60 mm. Lower turret with C-axis driven tools. Both turrets with 12 stations each and all of them motorized. Possibility of setting with 24 tools in each turret. Motor power of both heads 15 Kw. Power of milling motors 5,5 Kw. Speed of both heads 4.000 rpm. Speed of motorized tools 5.000 rpm. Bars loader of 1,5 meters. Interface for any brand and model of loader. Front bucket type parts collector installed in the door. Rear parts collector gantry robot type with 3 Kg. capacity clamp. Cutting power 320 N/M. Distance between heads 980 mm. MQ system for tool clamping. Main spindle bar pitch 70 mm. Size of heads A2-6. Rapid traverse speed 25 m/min in X and Z axes. Indexing time for turret chan ...

Complete with Lns Quick Load Servo Iii bar loader Max Distance between Tips mm. 970 / Min. mm. 210 Max Turning Diameter mm. 190 Main Spindle: Spindle Nose (Asa Attachment) Asa A2-6 Spindle speed (Min./max.) Rpm/min. 4,500 Spindle Motor Power Kw Kw. 11/15 Bar passage mm. 65 Counter spindle Spindle Nose (Asa Attachment) Asa A2-5 Spindle speed (Min./max. )g./min. 5,000 Spindle Motor Power Kwkw. 11/7.5 Bar passage 51 mm Number of upper turrets 2 Number of Lower Turrets 1 X Axis Travel mm. 167.5 Z Axis Stroke mm. 250 Y Axis Travel mm. 102 X Axis Travel 2mm. 167.5 Z Axis travel 2mm. 250 Y Axis travel 2mm. 102 X Axis Travel 3mm. 167.5 Z Axis travel 3mm. 685 Fanuc 16i-tb control Dimensions W D Hmm.3.930 X 2.270 X 2.110 2 High Pressure Pumps Paper Filter Conveyor Finished Pieces External mat Weight 12,000 kg Year 2004

Siemens Somatom Definition Flash, 128 lines, built in 2011, 2 X-ray emitters Straton MX ( DoM 2021 440.000 SS / DoM 2022 installation 2023 87000 SS )

GranitoGrav photo engraving system for granite/gravestones and glass (also suitable for glasses and bottles) The CNC unit for photo engraving in stone and glass. The CNC milling machine series High-Z/S-400T with CNC module GranitoGrav including software for the sensational price. Whether on tombstones, Memorial plaques, tile, glass, mirror glass... You simply load your color.- or black and white photo in the CAD-CAM software ConstruCAM-3D ( all software is switchable in english language ) in the module specially developed, specify the output of the desired size and let the milling paths are calculated. This file will be ready to open in the machine software and sent to the machine! It is really easy! No programming skills are required to do so! Software provides all Windows systems ! The CAM software works off your data accurately and in a very short time and created excell ...

GranitoGrav photo engraving system for granite/gravestones and glass (also suitable for glasses and bottles) The CNC unit for photo engraving in stone and glass. The CNC milling machine series High-Z/S-400T with CNC module GranitoGrav including software for the sensational price. Whether on tombstones, Memorial plaques, tile, glass, mirror glass... You simply load your color.- or black and white photo in the CAD-CAM software ConstruCAM-3D ( all software is switchable in english language ) in the module specially developed, specify the output of the desired size and let the milling paths are calculated. This file will be ready to open in the machine software and sent to the machine! It is really easy! No programming skills are required to do so! Software provides all Windows systems ! The CAM software works off your data accurately and in a very short time and created excell ...

GranitoGrav photo engraving system for granite/gravestones and glass (also suitable for glasses and bottles) The CNC unit for photo engraving in stone and glass. The CNC milling machine series High-Z/400-T with CNC module GranitoGrav including software for the sensational price. Whether on tombstones, Memorial plaques, tile, glass, mirror glass... You simply load your color.- or black and white photo in the CAD-CAM software ConstruCAM-3D ( all software is switchable in english language ) in the module specially developed, specify the output of the desired size and let the milling paths are calculated. This file will be ready to open in the machine software and sent to the machine! It is really easy! No programming skills are required to do so! Software provides all Windows systems ! The CAM software works off your data accurately and in a very short time and created excelle ...

GranitoGrav photo engraving system for granite/gravestones and glass (also suitable for glasses and bottles) The CNC unit for photo engraving in stone and glass. The CNC milling machine series High-Z/S-400T with CNC module GranitoGrav including software for the sensational price. Whether on tombstones, Memorial plaques, tile, glass, mirror glass... You simply load your color.- or black and white photo in the CAD-CAM software ConstruCAM-3D ( all software is switchable in english language ) in the module specially developed, specify the output of the desired size and let the milling paths are calculated. This file will be ready to open in the machine software and sent to the machine! It is really easy! No programming skills are required to do so! Software provides all Windows systems ! The CAM software works off your data accurately and in a very short time and created excell ...

GranitoGrav photo engraving system for granite/gravestones and glass (also suitable for glasses and bottles) The CNC unit for photo engraving in stone and glass. The CNC milling machine series High-Z/S-400T with CNC module GranitoGrav including software for the sensational price. Whether on tombstones, Memorial plaques, tile, glass, mirror glass... You simply load your color.- or black and white photo in the CAD-CAM software ConstruCAM-3D ( all software is switchable in english language ) in the module specially developed, specify the output of the desired size and let the milling paths are calculated. This file will be ready to open in the machine software and sent to the machine! It is really easy! No programming skills are required to do so! Software provides all Windows systems ! The CAM software works off your data accurately and in a very short time and created excell ...

GranitoGrav photo engraving system for granite/gravestones and glass (also suitable for glasses and bottles) The CNC unit for photo engraving in stone and glass. The CNC milling machine series High-Z/400-T with CNC module GranitoGrav including software for the sensational price. Whether on tombstones, Memorial plaques, tile, glass, mirror glass... You simply load your color.- or black and white photo in the CAD-CAM software ConstruCAM-3D ( all software is switchable in english language ) in the module specially developed, specify the output of the desired size and let the milling paths are calculated. This file will be ready to open in the machine software and sent to the machine! It is really easy! No programming skills are required to do so! Software provides all Windows systems ! The CAM software works off your data accurately and in a very short time and created excelle ...

GranitoGrav photo engraving system for granite/gravestones and glass (also suitable for glasses and bottles) The CNC unit for photo engraving in stone and glass. The CNC milling machine series High-Z/400-T with CNC module GranitoGrav including software for the sensational price. Whether on tombstones, Memorial plaques, tile, glass, mirror glass... You simply load your color.- or black and white photo in the CAD-CAM software ConstruCAM-3D ( all software is switchable in english language ) in the module specially developed, specify the output of the desired size and let the milling paths are calculated. This file will be ready to open in the machine software and sent to the machine! It is really easy! No programming skills are required to do so! Software provides all Windows systems ! The CAM software works off your data accurately and in a very short time and created excelle ...

GranitoGrav photo-gravusystem for granite/tombstones and glass (also suitable for glazes and bottles) The CNC unit for photo engraving in stone and glass. The CNC-Fraesmaschine Series High-Z/S-400T with CNC module GranitoGrav incl. Software at a sensational price. Whether on gravestones, commemorative plaques, tiles, glass, mirror glass ... Load colour photos or photos in black and white into the CAD-CAM ConstruCAM 3D software via the specially developed module. You can then enter the output of the desired size and have milling paths calculated. This created file is opened in the machine's control software and therefore sent to the machine. - More is not necessary! It's really easy ! No programming skills are required ! The CAM software works out your data in a practical and short time and thus creates first-class photos in all the above-mentioned materials with the CNC machin ...

GranitoGrav photo-gravusystem for granite/tombstones and glass (also suitable for glazes and bottles) The CNC unit for photo engraving in stone and glass. The CNC-Fraesmaschine Series High-Z/S-400T with CNC module GranitoGrav incl. Software at a sensational price. Whether on gravestones, commemorative plaques, tiles, glass, mirror glass ... Load colour photos or photos in black and white into the CAD-CAM ConstruCAM 3D software via the specially developed module. You can then enter the output of the desired size and have milling paths calculated. This created file is opened in the machine's control software and therefore sent to the machine. - More is not necessary! It's really easy ! No programming skills are required ! The CAM software works out your data in a practical and short time and thus creates first-class photos in all the above-mentioned materials with the CNC machin ...

GranitoGrav photo-gravusystem for granite/tombstones and glass (also suitable for glazes and bottles) The CNC unit for photo engraving in stone and glass. The CNC-Fraesmaschine Series High-Z/S-400T with CNC module GranitoGrav incl. Software at a sensational price. Whether on gravestones, commemorative plaques, tiles, glass, mirror glass ... Load colour photos or photos in black and white into the CAD-CAM ConstruCAM 3D software via the specially developed module. You can then enter the output of the desired size and have milling paths calculated. This created file is opened in the machine's control software and therefore sent to the machine. - More is not necessary! It's really easy ! No programming skills are required ! The CAM software works out your data in a practical and short time and thus creates first-class photos in all the above-mentioned materials with the CNC machin ...

GranitoGrav photo-gravusystem for granite/tombstones and glass (also suitable for glazes and bottles) The CNC unit for photo engraving in stone and glass. The CNC-Fraesmaschine Series High-Z/S-400T with CNC module GranitoGrav incl. Software at a sensational price. Whether on gravestones, commemorative plaques, tiles, glass, mirror glass ... Load colour photos or photos in black and white into the CAD-CAM ConstruCAM 3D software via the specially developed module. You can then enter the output of the desired size and have milling paths calculated. This created file is opened in the machine's control software and therefore sent to the machine. - More is not necessary! It's really easy ! No programming skills are required ! The CAM software works out your data in a practical and short time and thus creates first-class photos in all the above-mentioned materials with the CNC machin ...

GranitoGrav Photo-Gravusystem for granite/tombstones and glass (also suitable for glazes and bottles) The CNC unit for photo engraving in stone and glass. The CNC-Fraesmaschine Series High-Z/S-400T with CNC module GranitoGrav incl. Software at a sensational price. Whether on gravestones, plaques, tiles, glass, mirror edible glass ... Just download your black and white or color photo as a template into the special module of the CAD-CAM software ConstruCAM-3D, then enter the output of the wuenengeed size and can then calculate the fraeswege. This file is then opened in the machine software and sent to the machine accordingly, ready ! It's really easy ! No programming skills are required ! The CAM software works out your data in a practical timeandand creates your data with the CNC machine and the GranitoGrav photo module Grinding pins cost about 3- 4 euros per piece and hold ...