Capacity, ton 1000 Slider stroke, mm 400 Unattainable stroke, mm 12 Slider strokes, spm 20 Shut height, mm 730 Distance adjustment between table and slider, mm 200 Slider size, mm 1200 x 1200 Table size, mm 1250 x 1250 Table gap size, mm 800 x 800 Bolster plate thickness, mm 260 Pneumatic cushion capacity (eject), ton 40 Pneumatic cushion stroke, mm 160 Pneumatic cushion load, kg 4500 Main power drive, kW 75 Voltage, V 340 Machine dimensions, mm 4310 x 3820 x 6790 Machine weight, kg 77100

(press delayed) Nominal force, mc 1000/R Progress in the slide, mm 250 Number of continuous strokes, min-1 80 The number of single inclusions, min-1 18-20 Die height 560 mm Adjustment, mm 20 Table dimensions, mm left to right 770 front to back 990 Size slider, mm left to right 720 front to back 720 Power of main drive, kW 55 Voltage electric main drive VOLT / HZ 380 Dimensions of the press, mm left to right 2850 aft 5800 height above floor level 3650 Weight kg 67 600

Capacity: 2500 ton Slider stroke: 190 mm Size of a working course of slider before its extreme bottom position corresponding nominal capacity: 4.5 mm Number of slider courses per minute: 20 Maximum distance between table and slider (in lower position of slider): 800 mm Distance adjustment between table and slider: 20 mm Table overall dimensions: - from front to rear: 1400 mm - from left to right: 1250 mm Thickness of a under-forginig plate: 230 mm Hole diameter in a table: 125 mm The size of a slider in front - back: 900 mm Lower eliminator stroke length: 190 mm force of the bottom pusher: 75 ton Distance between railings: 950 mm Course of a pusher in a slider: 15 mm Capa ...

Maximum force: 1600 tons Slider stroke length: 400 mm Unattainable-course: 12 mm Number of courses of a slider per minute: 16 Number of single turn-on: 12 The closed height: 870 mm Adjustment: 220 mm Under-forginig plate: -From left to right: 1600 mm -From front to rear: 1600 mm -Thickness: 650 mm Slider overall dimensions: 1600x1600 mm Aperture in a table: 1000x1000 mm window dimensions in cheeks: 1650x1650 mm Course of a rigid pusher in a slider: 100 mm Force of a rigid pusher in a slider ton-force: 80 Main electric motor power: 110 kW Course of pneumatic pillow: 160 mm Force of pushing out of a pneumatic pillow ton-force: 71 Hydropneumatic pillow: -Working course: 250  ...

(analogue of KB8344) Specification: Nominal force: 2500 ton Ram stroke: 190 mm Number of strokes in 1 minute: 20 Shut height: 800 mm Bolster plate-to-ram adjustable stroke: 15 Table size: 1250x1400 mm Weight 124.230T  ...

• more information

Nominal force: 4000 tons Slider's undershoot to BDC: 10 mm Slider stroke: 630 mm Frequency of continuous strokes per min: 10 The highest frequency of single strokes per min: 7 Closed height: 1180 mm Adjustment of closed height: 200 mm Slider's dimensions: -From left to right: 5000 mm -From front to back: 2000 mm Dimensions of the plate of the die: -From left to right: 5000 mm -From front to back: 2000 mm Capacity of the main drive: 250 kW Overall dimensions: -From left to right: 7640 mm -From front to back: 5980 mm -Height above floor level: 10490 mm

Maximum force ton-force 400 Slider stroke length mm 250 Slider stroke length to lower position mm 12 Slider strokes per minute 25 Number of single turn-on 19 Maximum distance between table and slider (in lower position of slider) mm 510 Adjustment mm 160 The sizes of a under-forginig plate mm 1000 Table overall dimensions: mm - from front to rear 1000 - from left to right 1000 The sizes of an aperture in a table mm 630 Slider overall dimensions mm 800 x 800 window dimensions in cheeks mm 600 Total power of electric motors kW 43,3 Press overall dimensions mm - length 3470 - width 3140 - height 5940 Press weight without hydro ...

Maximum force: 2000 tons Slider stroke length: 500 mm Number of courses of a slider per minute: 6 Number of single turn-on: 3.6 The closed height: 1160 mm Adjustment: 220 mm Table size: -From left to right: 2000 mm -From front to rear: 2500 mm -Thickness die plate: 300 mm Slider overall dimensions: 1600x2000 mm Aperture in a table: 1250x1250 mm window dimensions in cheeks: 1600x1000 mm Maximum Die Weight: 6000kg Hydropneumatic cushion in the table: ·working stroke 250mm ·maximum clamping force 350 ton-force ·maximum push force 20 ton-force Main electric motor power: 125 kW Press overall dimensions: 5390x4870x8860mm Press weight: 228.990 tons

INTERMEDIATE SHAFT YES CONNECTING ROD N°1 Capacity: 1600 tons Slide stroke: 300 mm Slide stroke length at maximum force: 0,16 mm Distance adjustment between tableand slider: 10 mm Slide stroke number in 1 min: 75 Length of a rod: 920 mm The closed height: 660 mm Table overall dimensions: 940x1200 mm Table height above floor level: 450 mm Slide overall dimensions: 860x910 mm The size of lateral windows: -Height: 560 mm -Width: 600 mm Main motor: 110 kW Press overall dimensions: -Length: 5060 mm -Width: 3940 mm -Height above floor level: 5125 mm Press weight: 120 tons

RATED CAPACITY TN 2500 INTERMEDIATE SHAFT YES CONNECTING ROD N° 1 SLIDE STROKE MM 350 CONTINUOUS STROKE PER MINUTE N° 60 SINGLE STROKE PER MINUTE N° 14 DIE SPACE MM 890 DIE SPACE ADJUSTMENT IN THE TABLE MM 10 TABLE DIMENSIONS L TO R MM 1200 F TO B MM 1400 SPACE BETWEEN UPRIGHTS MM 1320 RAM DIMENSIONS L TO R MM 1070 F TO B MM 1120 SUPERIOR KNOCKOUT POWER TN 6 STROKE MM 50 PUSHERS N° 1 LOWER KNOCKOUT POWER TN 10 STROKE MM 50 PUSHERS N° 1 DIMENSIONS SIDE E931468 WINDOWS LEFT RIGHT MM 720 HEIGHT MM 890 MAIN MOTOR POWER KW 132 OVERALL DIMENSIONS L TO R MM 5350 F TO B MM 4680 HEIGHT ABOVE FLOOR LEVEL MM 6840 PRESS TOTAL WEIGHT TN 198