tielbürger used for sale

Tipper Tie technopack table model clipper, dimensions: 200 mm x 300 mm x 850 mm. Including crate with clips.

Tipper Tie technopack mobile double clipper, model: KDCN, number: 1094.156, dimensions: 550 mm x 1000 mm x 180 mm.

TIPPER TIE TECHNOPACK KDCNV semi automatic double Clipper

TIPPER TIE TECHNOPACK TCNV-200 BT pneumatically operated single-clipper

Tipper Tie Technopack TCNV pneumatically operated single-clipper for natural casings, ring-shaped casings, end casings or artificial casings made of collagen, cellulose or PVDC, as well as bags made of polyester, polyethylene or linen The machine is immediately available and can be tested in Koblenz, Germany.

Tipper Tie TAN, automatic single-clipper, calibres up to 55 mm, for natural casings, ring casings or synthetic casings made of collagen, cellulose or PVDC, up to 320 cycles/minute, on a trolley You are very welcome to inspect the machine at our facility in Koblenz, Germany.

8 boxes with Tipper Tie clips

Tipper Tie Alpina Swopper SW330S 330 litre bowl cutter. Running in production until the factory closed in 2020.

Used continuous cutter TIPPER TIE ALPINA, type: TTChop 55V El. Connection: 3x 400 V, 50 Hz, 380 / 500 / 555 A, 10 kA, 212 kW, 150 bar Net weight: 7,800 kg Further information on request.

Table Clipper Tipper Tie TCNA 200, Weight approx. 12kg, used, fully functional

Table Clipper Tipper Tie TCNV 200 A, Weight approx.: 12kg, good used condition, fully functional

Mobile double clipper. These user-friendly and efficient machines handle natural, artificial, and fibrous casings for a variety of portioned food and non-food applications. Durable stainless steel construction. Applications – sausage, fresh ground meats, soy tofu/tempeh/seiten chubs, vegan sausage, fresh ground fish, surimi/fish sausage paste, raw/frozen/refrigerated pet food, pumpable cheese, soup, sauce, and industrial explosives chub packages. Capacity up to 130 cycles / min depending on the product. Air pressure: 6 bar. Power: 380 V - 50 Hz - 0,5 Amp. Stainless steel control panel with Siemens S7-200 PLC and on/off switches., Including ± 40 reels of clips, type XEC21-210T., Additional features:, This machine can be combined with the vacuum filler, Stock Number #1059 (Vemag HP3), see photo. Additional piping in between the 2x machines is excluded., Type of Machine: Double clipper,  ...

Special items deep drawing film Under film white 150 my 432 mm wide 40 rolls a. 500 lfm. = 20,000 lfm Upper foil white 70 my 415 mm wide 40 rolls a. 500 lfm. = 20,000 lfm Roller core: 76 mm suitable for feta cheese packaging or similar Prices on request

30 cm working width

Tiede Universal U550 GW Magnetic Electric Crack Detector Manufacturer: Tiede GmbH Type: U550 GW Type: Magnetic Electric Crack Detector Rated operating current I 5400 A AC seats or 3800 A AC effective, adjustable in 8 steps Flow Ø: 8000 Aw full wave DC. Adjustable in 8 steps, measured according to DIN 54 131 Mobile magnetization coil lights Ø 800 Bushing Ø: 5000 Aw with alternating current adjustable in 8 stages, chamois according to DIN 54131 Year of construction 1984 Accessories/special equipment Electronic magnetization controls Degaussing device Support rolls Blackout cabin Main machine dimensions Total length mm 8.000 Total width mm 2,500 Total height mm 2.500 Scope of work Remarks Nominal diameter mm ~5.500 Field of application: Testing of crankshafts. Item condition: used Further technical data can be found on the machine  ...

Technical data for the Tiefensteg: Manufacturer: SSI Schaefer The scope of delivery includes: 01x Tiefensteg, used Material colour: grey Total length: approx. 1,108 mm f. column depth: approx. 1,100 mm Clear span: approx. 999 mm Truss support: approx. 55 mm Profile dimensions: CS 190 x 75 x 13 mm Material thickness: approx. 2.00 mm Weight / pcs.: approx. 8,020 kg Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

Ties for snowbord // weight - 580 g // 6 pcs. new moulds

Deep hole drilling machine make TBT Tiefbohrtechnik type T 10-250Machine no. 418.311.215, year of construction 1989 with control SIMATIC S5Technical specifications:Max. Drilling depth: 250 mmTable size 420 x 780 mmDrilling area steel ST 60 full drilling: max 16 mm Boring: max 20 mm:Drilling process: ELB (single-lip drilling)Number of drilling spindles: 1Main spindle drive: 2.6 / 3.2 kWSpeeds: 1020 - 4400 rpm: 1960 - 2950 rpm: 2950 - 4400 rpm: 4400 - 8950 rpmFilters: plate filter 60 l / minCooling lubrication system: 670 l deep drilling oilelectrical connection: 380 V, 15 kWExternal dimensions of the system including SS L x W x H: 3850 x 1800 x 2000 mmWeight approx .: 2200 kgWith- SIMATIC S5 115 U ELGO 85 P controller- separate control cabinet- internal cooling- various single-lip drills (see photos)- workpiece counter- coolant system- filter- Central lubrication unit- Instruction manual  ...

Sell a used demagnetization device Dimensions 22506001280mm with conveyor belt. Bandwidth 300mm Passage 400mm diameter, height conveyor belt top edge / height passage 280mm Tiede type ET400 8Kw 16A / 400V connection

Inv. Num. : 4741 Type: IR-SA 840 M Producer: Tiesse Created: 2006 Parameters: Table dimensions: 2410x930 mm Height: 3300 mm Width: 7000 mm Length: 5600 mm Equipment: Robot KAWASAKI FA 06 E C14 VK Robot Support MIG welding machines: Fronius Transpuls Sinergic 5000 Inverter TIG welding machines: Fronius Trans TIG 3000 DC Welding torch: ROBO 455 S S. Fronius FK4000 cooling unit Burner support: Binzel MOD CAT CPL-M Space for Fronius VR 1500 Euro 4R wire feeder Burner cleaning station Binzel MOD BRS-LC

Hammer mill Tietjen VDK-6 OK condition

Inv. Num. : 7365 Type: B3N-6000 Producer: TBT Tiefbohrtechnik Created: 1991 Parameters: Control system: Siemens Maximum turning diameter: 8.5-63.5 mm Spindle power: 270 kW Bed length: 17000 mm Maximum drilling length: 8000 mm

Manufacturer: Tietjen Type: NDK 5.2-S Year : 2017 Type : Hammer mill Applications : Designed for wet shredding of bulk food and agricultural products, Motor type : hydraulic Frame and rotor in stainless steel 304, 1.4301. Weight (excluding motor): 1250 kg Injection nozzles for liquids Bearing temperature monitoring Pneumatically operated inlet flap

-Blower hammer mill with 45 kW -Rotor should be prepared

right / left Number of spindles 4 Slide stroke 800 mm Drilling area in steel St-60 Full drilling dia. 15 mm Boring dia. 20 mm Drilling method Single-lip drill

Hammer mill

without holder, for 10 - 18 t excavators

Semi-new automatic cellophane wrapping machine with double sealing mass and 6 station feeder. Can be used for non-shrink cellophane wrapping.

diameter: 0 mm workpiece length: 0 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Crack testing device for large series of workpieces The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DIGGING BUCKET 1,500 mm attachment tool, excavator bucket bucket with teeth

1) Drill pipe BTA Ø 43 x 2700 - 20 pcs; 2) Drill pipe BTA Ø 26 x 2700 - 40 pcs; 3) Drill pipe BTA Ø 22 x 2700 - 24 pcs;

with different Lehnhoff & Martin mounts in stock, from 30 cm width - 140 cm width in stock - more sizes and variants available on request. more information on our backhoe buckets in stock: 30 cm with Lehnhoff MS01 Symlock mount € 400,- 30 cm with Lehnhoff MS03 Symlock mount € 450,- 40 cm with Lehnhoff MS01 Symlock mount € 430,- 50 cm with Lehnhoff MS03 Symlock mount € 570,- 60 cm with Lehnhoff MS01 Symlock mount € 500,- 60 cm with Martin M03 mount € 500,- 70 cm with Lehnhoff MS03 mount € 680,- stock slope buckets: 100 cm with Lehnhoff MS01 Symlock mount € 590,- 100 cm with Martin M03 mount € 550,- 120 cm with Lehnhoff MS01 Symlock mount € 650,- 140 cm with Lehnhoff MS03 Symlock mount € 790,- 140 cm with Martin M10 mount € 1,120.00

Welding device, welding device -Transfer in current condition as seen -pneumatic: exciting -Dimensions: 210/170/H370 mm -Weight: 11.3 kg

Volume bucket 180 cm working width suitable for 30-40 t excavators, with Lehnhoff MS21 mount, mount width: 510 mm, bolt diameter 80 mm,

Working width 40 cm, receiving width 15 cm,

Working width 30 cm, recording width 190 mm, with VTN 50 bolt recording = Nino de Martis recording = Martin old version recording,

Working width 45 cm, recording width 190 mm, with VTN 50 bolt recording = Nino de Martis recording = Martin old version recording,

60 cm working width, with Verachtert CW30/40 mount,

Working width 150 cm, with teeth, with Verachtert CW30/40 mount

60 cm working width, with teeth, with Martin M10 mount

Buchdruck Nummerierwerke fuer Tiegel - Letter Press Numbering units for Tiegel - Cylinder Suenuem - Leibinger Numbering Units Letter Press Numbering units for Tiegel - Cylinder Div. Zubehoer + Ersatzteile (Nummerierwerke OHT) Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

3-tier Preparation Conveyor Suitable for a variety of applications: vegetables, poultry or meat. 3-tier system

Technical data for Tiefensteg: Shewing system: Meta (Thyssen) The scope of delivery includes: 01x Tiefensteg, used Material color: yellow Version: lowered Lowering: approx. 22 mm Total length: 1.115 mm suitable for stand depth: 1.100 mm clear span: 998 mm Truss support: approx. 52 mm Profile abm.: 85 x 50 mm Weight: 3,70 kg | Pcs.

The depth bar is suitable for a column depth of 1,050 mm and a truss width of max. 60 mm. The scope of delivery includes: 01x Tiefensteg, used Material color: blue Total length: approx. 1,060 mm f. Stand depth: approx. 1,050 mm Clear span: approx. 928 mm Technical data for the Tiefensteg: Shelving system: SSI Schaefer Profile dimensions: U 50 x 50 mm Truss support: approx. 65 mm Material thickness: approx. 3 mm Unit weight: approx. 3.53 kg

The scope of delivery includes: 01x Tiefensteg, used Material color: sendzimir galvanized Total length: approx. 1,010 mm Stand depth: approx. 1,000 mm Clear span: approx. 895 mm Profile dimensions: C: 75 x 45 x 18 mm Technical data for the Tiefensteg: Manufacturer: Jung Heinrich Type: Esmena (TFZ 18) Truss support: approx. 55 mm Material thickness: approx. 1.50 mm Weight: 2.731 kg / pcs.

7 x LETTERPRESS - NUMMERATORS FOR ZYLINDER & TIEGEL 1x straight, 6 digits, backwards, small numbers 5x straight, 7 digits, backwards, big numbers 1x straight line, 5 digits, backwards, small numbers

Tie bar expansion nut for die-casting machine, trapezoidal thread 285 x 10, Oleopress, new Special price In addition, we also have a spare column and 2 adjusting nuts in separate advertisements. If you have a VAT number, we will gladly issue an invoice without VAT. Weight approx. 129 kg As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in operation, is completely new and in its original packaging.

Tie bar expansion nut for die-casting machine OL1500, trapezoidal thread 250x12, Oleopress, new -50% Special price -50% off the original price! In addition, we also have a spare column and 2 adjusting nuts in separate advertisements. If you have a VAT number, we will gladly issue an invoice without VAT. Weight approx. 100 kg As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in use and is completely as good as new.

The scope of delivery includes: 01x Tiefensteg, used Material color: sendzimir galvanized total length: approx. 1,110 mm suitable for stand depth: approx. 1,100 mm Clear span: approx. 1,000 mm Profile dimensions: C 70 x 50 x 15 mm Truss support: approx. 50 mm Weight/ pcs.: approx. 3,02 kg

The scope of delivery includes: 198x Tiefenstege, used Material color: sendzimir galvanized total length: approx. 1,110 mm suitable for stand depth: approx. 1,100 mm Clear span: approx. 1,000 mm Profile dimensions: C 70 x 50 x 15 mm Truss support: approx. 50 mm Weight/ pcs.: approx. 3,02 kg Hint: The unit price is only valid for a purchase quantity of at least 198 pieces (01x pallet)