tha used for sale

Bending length 8200 mm Bending depth 1500 mm bending capacity 2 mm autom. depth stop: 8 - 1500 mm max. Opening width of the upper beam: 200 mm Adjustment range of upper beam: 6 mm Bending angle 0-140 Weight: approx.7000 kg Control: Duscher Controlling Machine outside dimensions: 9350 x 2300 x 1950 mm

For sale is a hot-dip galvanized primary construction of a hall structure (hL24m x hW17m x dH4.6m) from an unrealized construction project. The roof purlins and wall beams which were planned as a secondary construction are not part of the offer. System length: 24.00 m; System width: 17.00 m wingspan; eaves height: 4.60 m; ridge height: 6.85 m; roof pitch: 15 degrees; PRICE: on written request with complete company / contact details.

We sell 2 x Thales nShield Connect 6000+, Modules, NH2068, 32GB/SSD 1 x Thales nShield Connect 6000+, Modules, NH2054, 32GB/SSD In most cases, the entire item can only be handed in completely. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many other refurbished/used hardware available from the areas of the systems mentioned here as well as from other systems of these manufacturers: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at a reasonable price from HASCON! The sale is only made to companies. We have available  ...

We sell 4 x Thales Security Modules, NH2068, NS2054 In most cases, the entire item can only be handed in completely. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many other refurbished/used hardware available from the areas of the systems mentioned here as well as from other systems of these manufacturers: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at a reasonable price from HASCON! The sale is only made to companies. We have available complete systems and components in refurbished conditions from all these manu ...

There are three identical agitator tanks available, capacity: 10,000l, operating overpressure inner tank/ jacket: -1 to 6/ 6bar, diameter: 2500mm, height: 3180mm, weight: 10.5t, with motor, gearbox, lantern, barrier pressure system and documentation, the tanks were used for 15 years.

Size: 800 x 1200 mm Equipments: Sheet format max: 1,200 x 800 mm, stack height max: 1,320 mm Fork Model Capacity: 1,000 kg Vibration aeration

Lathe, lathe, mechaniclathe -Handover in the current condition as seen -Scope of delivery: according to pictures -Speeds: 2600/1500/1050/650 rpm -Spindle Bore: 23mm -Intake: clamping sleeves/threaded mount M37 x 3 mm -Dimension: 850/430/H1160 mm -Weight: 288 kg

Hot-dip galvanized steel hall [hL53.6m x hW15.6m x dH6.5m / fH7.6m] dismantled from stock. HALL STRUCTURE: the hot-dip galvanized primary structure consists of 9 main frames (IPE 450 frame columns, IPE 300 frame trusses) as well as 2 lightweight end wall constructions (HEA 140 corner supports, HEA 160 internal supports, HEA 120 gable wall transoms) of steel grade S 235 JRG2 (St 37), and the secondary structure consists of hot-dip galvanized lightweight profiles, i.e. roof purlins such as eaves purlins made of Sigma profile SE250/100/30/15/2.5 mm and C-profile wall beams C+150/90/43/15/3 mm of steel grade S355 JRG3 (Lv. 52). The bracing consists of pressure pipe diameter 70 x 2.6 mm as well as roof and wall diagonals made of round steel (diameter 16 mm). ROOF: Hösch Isorock Integral D 115 MW roof panels, component width 1000 mm, sheet thickness 0.50 mm inside and outside (core thickn ...

It is a used but durable hall construction which could also serve as a ball sports / football hall, equestrian sports hall and much more in the future. The steel frames are self-supporting and have a height of almost 11 meters in the ridge (in the middle). APPROXIMATE DIMENSIONS: Floor area: 2560 sqm built-up BG area; | Hall length: 65.50 m AK wall + boiler room; | Hall width: 39.09 m AK wall planking; | Eaves Height: 4.27m UK Roofing; | First - Height: 10.70 m OK Roofing; | Roof pitch: 18.75 degrees sym. gable roof; | STRUCTURE: Solid, articulated steel frame construction, with steel frames made of rolled sections mounted on point foundations or rails. The end frames or gable wall constructions are made of rolled profiles. Purlin line made of hot-rolled roof purlins. The 2 middle hall segments stand on rails so that the hall can be opened in good weather. FA ...

General SKU212T523 LocationBarneveld MakeEHW Thale TypeM20-85 No.6 1 3965/1 Year of construction2000 Pressure Working pressure6 Bar Vacuum possiblecheck Main Features MaterialGlass Volume204 Ltr. Pressure6 Bar Vacuumcheck Specified Features - Pressure vessel MaterialGlass - Enamel Pressure vessels Closed vertical tankcheck Notified bodyTÜV Capacity204 Ltr. Vessel sizesDia: 600x800 mm Dished topcheck With covercheck Dished bottomcheck Top connectionsDN 80(2x), DN 50(2x) OutletDN 50 Max. temperature-25/200°C Information Total height1,05 m Weight315 kg Floorspace0,8x0,8 mPressure vesselsEHW ThaleTanks > Pressure vesselsBrand > EHW Thale What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherla ...

General SKU201P101 LocationBarneveld MakeThaletec GmbH Thale (DE) TypeRWA BE 1600-1400AM-D100 No.627323/1 Year of construction2008 Material Lining materialGlass - Enamel Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume2330 Ltr. Motor5.5 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity2330 Ltr Vessel sizesdia.1500mm x1400mm Dished bottomcheck Dished top sidecheck Manholedia.500mm Top connections(5x) dia.100mm, (2x) dia.200mm Outletdia.100mm With jacket(330 Ltr) Max. temperature-25 / 200 Degr.C. With propellor stirrercheck Motor5,5 KW, 400 Volt (Atex II 2G EEx de IIC T4) ) Speed mixing shaft24-120 rpm Information Floorspace1,8x1,8 M Total height4,0 M Weight3000 KGMinerals & inorganicAPIGlass-lined ReactorsPlastic & polymersBiopharmaceuticalDyes ...

General SKU345S663 LocationBarneveld MakeEHW Thale Email GmbH TypeM20-85 16 No.618083/1 Year of construction2002 Pressure Working pressure1 Bar Vacuum possiblecheck Main Features MaterialGlass Volume190 Ltr. Pressure1 Bar Vacuumcheck Specified Features - Pressure vessel MaterialGlass - Enamel Notified body(TuV) Capacity190 Ltr Vessel sizesdia.600 x600mm Dished topcheck Dished bottomcheck With covercheck Top connectionsDN100, DN80, DN50 OutletDN50 Max. temperature-120/200 degr.C. Information Total height1,5 m CEcheck Mounted on legscheck Floorspace0,7x0,7 mPressure vesselsThaleTanks > Pressure vesselsBrand > Thale What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in  ...

General SKU212T526 LocationBarneveld MakeEHW Thale Email GmbH No.6 1 3964/1 Year of construction2000 Pressure Working pressure6 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialGlass Volume2265 Ltr. Pressure6 Bar Specified Features - Pressure vessel MaterialGlass Notified bodyTÜV Capacity2265 Ltr. Vessel sizes1400x1750 mm Dished topcheck Dished bottomcheck ManholeDN 500 Top connectionsDn 50 (4x), DN 100 OutletDN 100, DN 80 Max. temperature-25/200 °C Information Mounted on legscheck Weight1500 kg Floorspace1,35x1,35 m Total height2,92 mPressure vesselsThaleTanks > Pressure vesselsBrand > Thale What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please ...

General SKU082C465 LocationBarneveld MakeEisen- und Hüttenwerke Thale AG No.60 6731 Year of construction1996 Material Lining materialGlass - Enamel Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Number of vertical pressure tanks1 Main Features MaterialGlass Volume2350 Ltr. Pressure6 Bar Vacuumcheck Specified Features - Pressure vessel Capacity2350 Ltr Vessel sizesdia. 1400x1200mm Dished topcheck Dished bottomcheck Manholedia. 500mm Top connections(5x) Outletdia. 80mm Max. temperature200 Degr. C. With jacket(300 Ltr) Information Floorspace1,6x1,6 M Total height2,5 M -- VESSEL HAS NEVER BEEN USED -- Weight2150 KGPressure vesselsThaleTanks > Pressure vesselsBrand > Thale What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping  ...

General SKUR0955 LocationBarneveld MakeEHW Thale Email GmbH (D) Type6300 ltr No.6 2 3519 Year of construction2006 Pressure Working pressure6 Bar Vacuum possiblecheck Number of horizontal pressure tanks1 Main Features MaterialGlass Volume6300 Ltr. Pressure6 Bar Specified Features - Pressure vessel MaterialGlass - Enamel Capacity7235 ltr (nett 6300 ltr Vessel sizesdia. 1800x3200mm Dished frontscheck ManholeDN600 Top connectionsDN50 (3x), DN80 (2x) OutletDN125 Max. temperature-25/200 degr. C Information Mounted on consolescheck Total height2,3 M Weight4500 Kg CEcheck Floorspace3,7x1,8 MPressure vesselsThaleTanks > Pressure vesselsBrand > Thale What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Nethe ...

General SKU345S664 LocationBarneveld MakeEHW Thale Email GmbH No.618083/2 Year of construction2002 Pressure Working pressure1 Bar Vacuum possiblecheck Main Features MaterialGlass Volume190 Ltr. Pressure1 Bar Vacuumcheck Specified Features - Pressure vessel MaterialGlass - Enamel Notified body(TuV) Capacity190 Ltr Vessel sizesdia. 600x600 mm Dished topcheck Dished bottomcheck Top connectionsDN25, DN80 (3x) OutletDN50 Max. temperature-20/200 degr.C.Pressure vesselsThaleTanks > Pressure vesselsBrand > Thale What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

It is a thermally insulated lightweight hall (built in 2008), whose hot-dip galvanized supporting structure and sandwich cladding together with various equipment can be reused. DIMENSIONS according to construction documents: Covered area: 375.00 square meters; Width of the hall: 25.00 m AK wall; Length of the hall: 15.00 m AK wall; Frame spacing: 5.00 m MM frame supports; Eaves height: 5.24 m at the intersection of roof and wall; Ridge height: 7.30 m building height; Purlin spacing: 2.50 m floor area / 2.54 m roof pitch; Wall beam spacing: 2.50 m; Roof pitch: 10 degrees, symmetrical gable roof; LOAD ASSUMPTIONS: Wind load: 0.59 kN/m2 (DIN 1055-4 March 2005). Snow load: 1.25 kN/m2 (DIN 1055-5 July 2005). Seismic zone: 3 (DIN 4149-4 April 2005). STRUCTURE: The primary structure consists of hot-rolled and hot-dip galvanized IPE solid profiles. Main f ...

Option to purchase a hall ensemble of approx. 6000 m2 in total (90 x 66 x 6.3 / 8.3 m) or parts thereof. 3-span steel hall in portal construction, which will soon be dismantled. It is a thermally insulated hall, whose supporting structure and most of the cladding as well as various accessories can be reused. APPROXIMATE DIMENSIONS Covered area: approx. 6000 m²; Width of the hall: approx. 66.40 m AK wall Wingspans: approx. (15 + 15) + 15 + 21 m center-center supports; Length of the hall: approx. 90.40 m AK wall; Frame spacing: approx. 5.00 m MM truss; Eaves height: approx. 6.30 m at the intersection of roof and wall; Ridge height: approx. 8.30 m building height; STRUCTURE: The primary structure consists of hot-rolled Euro profiles (IPE and HEA / HEB). The secondary structure to support the building envelope is made of galvanized strip steel and cold-form ...

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Production hall hbs780s and warehouse hbs645s, which are to be dismantled in the short term. These are thermally insulated halls whose supporting structure and cladding as well as various accessories can be reused. Production hall hbs780s GFA area: approx. 780 m²; Hall width: approx. 30.00 m AK façade; Hall length: approx. 26.00 m AK façade; Frame spacing: approx. 5.60 m MM truss; Eaves height: approx. 7.75 m OK purlin; STRUCTURE: The primary structure consists of hot-rolled Euro profiles. The secondary structure to accommodate the building envelope consists of cold-formed steel profiles made of galvanized strip steel. ROOFING: Sandwich panels, grey-white, on purlins made of cold-formed and galvanised lightweight profiles. WALL COVERING: Sandwich panels and thermally insulated sheet steel cassettes on wall substructure made of cold-formed and galva ...

Position sensor, inductive row position sensor BALLUFF BNS 816-83-THA-16-602-11 New ! Dimensions: 150 x 95 x 100 mm

New device Special offer!

No of nails manufactured: 900 pcs/min Min. diam. of wire: 0,7mm Max. diam. of wire: 1,4 mm

Max number of nails per minute: 600 Max wire diameter: 3.15mm Min. wire diameter: 2.2mm Engine: a.) 5.5KW, 380V 50Hz b.) 220 V , 50 Hz Weight: 1970 Machine dimensions: 1995 x 1085 x 1070 mm

General SKU263S270 LocationBarneveld MakeDüker GmbH & Co KGaA TypeThaletec DN300x3600 No.1932 / 6 2 9892 Year of construction2009 Pressure Working pressure6 Bar Specified Features - Distillation Capacity260 Ltr. MaterialGlass - Enamel Information Total height3,8 M Weight500 Kg Floorspace0,7x0,6 MDistillationDüker GmbH & Co KGaAColumns > DistillationBrand > Düker GmbH & Co KGaA What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU263S271 LocationBarneveld MakeThaletec (D) TypeDN 300x4200 No.1934 / 6 2 9893 Year of construction2009 Pressure Working pressure6 Bar Specified Features - Distillation Capacity305 ltr. Max. temperature-25/200 degr. C MaterialGlass - Enamel Information Floorspace0,8x0,7 M Total height4,4 M Weight550 KgDistillationDüker GmbH & Co KGaAColumns > DistillationBrand > Düker GmbH & Co KGaA What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Agitator,stainless steel,,Scaba 30 VP-THa,shaft Ø 30 x L 1950 mm.

Bornemann SLH twin screw pumps are single-flow and self-priming. 2 contact-free intermeshing screws and the pump housing from closed chambers tha, according to the direction of rotation, constantly move towards the pressure dischange end of the pump. This axial system enables cautious, low-pulsation conveyance. It protects the media and maintains size, surface and visual intergrity of the products. The 2-in-1 principle conveys and cleans in one pump. Due to the wide range of the pump speeds, process cycles as well as CIP and SIP procedures are possible with just one pump. This pump is previously used in a dairy factory. Capacity: 1.500 ltr/h. Inlet pressure: - 0,1 bar with a differential pressure of 1,7 bar gives an discharge pressure of 1,6 bar. Speed 445 - 585 rpm. Viscosity 120 - 10.000 cst., Type of Machine: Double Screw Pump, Stock Number: 1012, Capacity: 1,5 m3/h, Inlet pressure: - ...

Bornemann SLH twin screw pumps are single-flow and self-priming. 2 contact-free intermeshing screws and the pump housing from closed chambers tha, according to the direction of rotation, constantly move towards the pressure dischange end of the pump. This axial system enables cautious, low-pulsation conveyance. It protects the media and maintains size, surface and visual intergrity of the products. The 2-in-1 principle conveys and cleans in one pump. Due to the wide range of the pump speeds, process cycles as well as CIP and SIP procedures are possible with just one pump. This pump is previously used in a dairy factory. Capacity: 2.500 - 2.200 - 2.500 ltr/h. Inlet pressure: - 0,33 - - 0,2 - -0,06 bar with a differential pressure of 4,51 - 3,9 - 0,16 bar gives an discharge pressure of 4,18 - 3,7 - 0,1 bar. Speed 473 - 582 rpm. Viscosity 10.000 - 120 - 120 cst., Type of Machine: Double Scr ...

We have more than 1000 used Alfa Laval SRC valves in different sizes in stock. Also actuators with heavy duty springs, two-step actuators, components like RC or BC housings (reverse closing, brewery CIP) and many more special items. We also sell valve parts, please ask. The valves can be customized with new seals of your choice and delivered ready to install. Valve tops like Thinktop , basic top ,Sattop , LKT-S , LKT-N and proximity switches also available, both new and used. Editec AB

Technical details material.: OPS, APET, PP, HIPS, ABS Forming area (VxH): 520 x 400 mms Depth of draw: 120 mms of material thickness (max.): 1.50 mms of technical details heating, moulding and cutting. This machine has the BFS system which allows to cut in place in the forming station Forming area: 520 x 400 mms of Max sheet width: 590 mms No of cycles are very much depending on the product. However we have been producing more different products with up 50 cycles by minute, but they were no deeper than 40 mms. All movements are 140 mms with a recommended max. depth/hight of 120 mms We have been producing OPS, APET, PP, HIPS and ABS on the machine. The read few years mainly HIPS and APET The thicknest material we have been producing, were 2.0 mms HIPS, but I wants recommend more than 1.5 mms HIPS.

centrimax.de Centrimax - Winkelhorst Trenntechnik GmbH has specialized in the supply of used SEPARATors from GEA Westfalia Separator and Alfa Laval for more than 30 years. The separators are overhauled by us and delivered with warranty. Our large stock of several hundred separators includes plate separators (self-cleaning separators, full-coat plate separators and nozzle separators) as well as chamber separators, for the clarification and separation of suspensions and liquid mixtures. Ask us if you are looking for advice on solving problems in the field of centrifugal separation technology. Buy from the specialist !

Other data and price on inquiry. Do you need another machine or the whole arrangement? We have more than 1000 other used machines on stock. Please send us an email with your need.

Metal press RMH MB (Mini Baler) This machine is particularly suitable for pressing aluminium, copper, zinc and other metals. The RMH MB Mini Baler is able to crush and then press larger material made of aluminium, copper, zinc and other metals thanks to lateral knives on three sides of the filling box. Technical data: Drive: 7.5 Kw / 400 V Weight: 1.8 T Shear lid pressure: 20 t Ground ram pressure: 40 t Working pressure: 220 BAR Filling box dimensions (L x W x D): 81.5 cm x 35 cm x 51 cm Package dimensions (L x W x material quantity): 35 cm x 20 cm x variable length (material quantity) Pressing cycle: about 1 minute Dimensions (L x W x H): 2.45 meters x 1.20 meters x 1.40 meters CE Norm Metal Baler RMH MB (mini baler) Cutting edges on three sides of the bale box and lid give this machine the ability to handle with oversized materials out of aluminium, copper,  ...

Used and new sea / maritime / transport containers permanently disposable ! For use as storage container and for transports (valid CSC approval). TECHNICAL DATA various types as 20ft (6m) and 40ft (12m) - Standard (height 2.60m) - High Cube (height 2.90m) - Open top (tarpaulin hood) - Flat Rack (open platform) - etc. also with valid CSC available. You can find the dimensions and weights on our website: abc.torlach.com INSPECTION Anytime possible in our warehouse TERM´S OF DELIVERY Ex works Freilassing, 83395 Germany, price incudes loading free on truck. SHIPMENT Worldwide shipment, delivery by truck/rail/ship anywhere and any anytime. Please send us your desired destination and terms for an offer. Do you have any questions We are at your service by below-mentioned contact details, please don´t hesitate to contact us! AlpsContainer Breslauer Str. 4 ...

The company Centrimax - Winkelhorst Trenntechnik GmbH is specialized for over 30 years on the delivery of used decanter centrifuges of the makes Flottweg, GEA Westfalia Separator and Alfa Laval. The decanter centrifuges are delivered by us fully reconditioned and with warranty. 2-phase decanters and 3-phase decanters (tricanters) as well as sedicanters count to our big stock of more than 100 decanter centrifuges for the clarification and the separation of suspension and liquid mixtures, as well as for the thickening and concentration of sludges. Ask us if you search consultation in the solution of problems in the area of the centrifugal separation technology. Buy from the specialist!

21-32-131 Electric - hydraulic U-lifting table NH HTF-U New equipment, made in Denmark. Lifting time: 18 secs. Loading and unloading by means of pallet truck. Items are lifted to an ergonomically correct working height. Remote controlled lifting/lowering with emergency stop. Consumption 0,75 kW. Capacity: 1000 kg. Voltage: 3 x 400 V. Minimal lifting height: 80 mm. Maximal lifting height: 780 mm. External dimensions: 1420 x 1140 mm. Internal free space: 585 mm. Lifting / lowing speed: 42 / 48 mm/s. Weight: 235 kg. Price: 1860 EUR Buy three or more – PRICE: 1695 EUR (EXW Jonava, Lithuania) Dear Customers, We invite you to visit our store Jonava. Currently used to present the largest exhibition of woodworking tools in the Baltic countries - your store have more than 300 installations. Our team is always ready to help you find the right equipment. JSC Medienos ...

We have tons of processing equipment for sale, half of it has never been used. Products from suppliers like: Alfa Laval - Heat exchangers, pumps, valves etc, large stock. Tuchenhagen - Valves and pumps APV - Valves and pumps Samson - Steam valves (more than 20, never used) Spirax sarco - Steam traps, steam separators, never used Siemens (Danfoss) - Flow meters MAG5000 and MAG6000, mass flow meters MASS 3100, unsed and unused Danfoss - Frequency converters, VLT5000 and VLT6000 series, still in boxes, only a few left Mobrey, Emerson Process - Level sensors, SK267 flanges 50 pieces, density meters unused Fisher rosemont - Mass flow meters DN50, 3 pieces, unused Procesdata - PD340 flow meters, more than 30 pieces, also mod. C, extended version (DN25-DN80) Not on the list? We probably have it, why not try us? Best regards, Editec AB

Used and new sea containers permanently disposable ! For use as storage container and for transports (valid CSC approval). TECHNICAL DATA various types as 20ft (6m) and 40ft (12m) - Standard (height 2.60m) - High Cube (height 2.90m) - Open top (tarpaulin hood) - Flat Rack (open platform) - etc. also with valid CSC available. You can find the dimensions and weights on our website: abc.torlach.com INSPECTION Anytime possible in our warehouse TERM´S OF DELIVERY Ex works Freilassing, 83395 Germany, price incudes loading free on truck. SHIPMENT Worldwide shipment, delivery by truck/rail/ship anywhere and any anytime. Please send us your desired destination and terms for an offer. Do you have any questions We are at your service by below-mentioned contact details, please don´t hesitate to contact us! AlpsContainer Breslauer Str. 41a DE-83395 Freilassin ...

Trapezoidal sheets - RAN 35/207 for roof and wall from 5,70 / m² (net) Profiled sheeting produced steel profiled sheets to measure! In thickness 0.50 mm (similar to RAL 3009) and a minimum order quantity of 1001,00 m², with us, get special items produced to measure. At a quantity up to 100.00 m² (sheet thickness 0.50 mm) = 6,23 / m² (net). At an additional cost of 2.22 m (net) get m² us also with Antikondensbeschichtung (anti drip coating/nonwoven coating). Prices for corrugated sheets as special items to measure direct from the manufacturer Special items Checkout, payment & pick up/delivery Only our terms and conditions, available at abc.ranrode.com, are based on our offer. We again expressly please indicate that our offer includes no technical editing (auditable statics, laying, color concepts, etc.). Therefore, we advise to statically verify our offer befor ...

Generators 16kVA Make/type: KR-16spezial Continuous average power (kVA): 16 Engine make/type: Kubota / D1105 EK2 Speed: 3000 rpm Speed control: Mechanical Generator brand / Type: Leroy Somer / 3748 J6/2 Voltage: 230/400 Volt, 50 Hz Control: Start/stop control panel with insulation monitoring and digital display Trailer: 2.5 to tandem car chassis with adjustable drawbar, overrun brakes, 4 piece parking jacks on each side Accessories: Device box with lockable handle Socket combination: 3 piece Sockets individually fused with machines 1 piece CEE Socket 16 amp. 5-pin machines protected Sockets lockable door Condition: used without guarantee, year of construction 2009, hours less than 250 hours

Chain plates (used) Serial No.: IMA -with rubber plate and mounting bracket -Dimensions: 80 x 60mm -more than 100 PCs available Price per piece: 4,50 euro + VAT

We have for sale a number of used hydrocyclones from the German manufacturer AKW A+V. Condition: USED Type: RWS 105 Nominal Diameter mm: 50 mm Cut Size dT50,?m: 5-15 Pressure Loss,bar: 1,5 - 3.0 Capacity ,m3/h: 2,4 -7,6 - High pressure resistance, The best operating pressure is much higher than the like products, much easier to reach the better separating effect, good cost performance. - Each type of hydrocyclones has big amount of successful applications, it can ensure that every operating hydrocyclone has the balance feeds. - The involute design from Germany makes the AKW hydrocyclones having better effects of concentration and separation. - Extra long lifetime. - Standardized parts, it is very convenient to change the spare parts.

Used Makrum cone crusher company, type 44.51. Available 2 pieces. In addition, two new cones. Cone crushers are used for crushing of hard and mean, for example. Basalt, granite, metal ores, diabase, quartz, limestone, sandstone, cement clinker. These materials may not may not have a clay-clay impurities in an amount greater than 5% and a humidity of more than 10%. Crushers are used to prepare the materials for the construction of roads, railway embankments, as well as pre-grinding materials, subject to further processing in other devices, eg. In mills. Hydraulic cone crushers have internal support team cone crushing. Adjusting the exit slot is controlled hydraulically, and read from the console. Hydraulic overload protection automatically disappearance of the inner cone and its return to the original position after the resignation of overload.

Used jaw crusher Makrum company, type 40.17 Specifications:   1.Wielko inlet -800x1000 mm.   2. The adjustment range of the gap outlet - 80/18 mm.   3. Max. the size of the input material - 750 mm.   4. Performance - 35-90 m3 / h   5. The power of 75 kW drive motor.   6. The weight of the largest unit 14 T.   7. Weight crusher 38.1 T. Jaw crushers are used for crushing of hard and mean, for example. Basalt, granite, metal ores, quartz, glass cullet, limestone, sandstone, cement clinker, etc. These materials may not have a clay-loam dirt more than 5%, and humidity more than 10%. Wide range of sizes crushers and their technical parameters allow you to apply them in different nodes crushing - from the initial node crushing until the final product.

Approx. 30 lfm shelf shepherd R3000 Manufacturer: Schäfer R3000 as new, see pictures. more than 300 meters present Stand, galvanized, height 2.5 m, depth 40 cm Shelves, galvanized, 100 kg load/compartment, field width approx. 100 cm Negotiation price: € 1,630.00 net from stock Offer consists of: 31 pcs stand or frame, 2.5 m, galvanized 90 pcs trays, 100 kg load/compartment, galvanized 10 St. Cross Associations for Stiffening. 3 levels per field (of course several are possible at an extra cost)Other compositions are possible. Heights 2.3m, 2.5m or 3m available. Goods are in stock. Constantly over 3000 lfm pallet racks in stock by numerous manufacturers. Transport and assembly possible on request. More information on request. (changes and error ...

Centrimax provides used, but reconditioned centrifugal decanters (by Flottweg also as full coat screw centrifuge GEA Westfalia Separator as centrifugal decanter - or by Alfa Laval also de decanter centrifuge or decanter centrifuge known as) makes Flottweg, GEA Westfalia Separator, Alfa Laval, Sharples, Andritz etc. Thanks to a comprehensive overhaul and delivery with a mechanical warranty, you meet the highest standards of quality from supplied decanter (full coat screw centrifuge, Zentrifugaldekanter). The new SPS controls supplied with the decanter enable easy integration into the existing production process and lead to a new machine character. Centrimax provides almost all de decanter types available on the market:

Thermal store / buffertank with a nominal capacity of 40,000 litres on 2 steel bases. Contents: approx. 40 m³ / 40,000 litres Material: steel Diameter with insulation: 2.75 m Diameter without insulation: approx. 2,50 m Year built: approx 2007 Buffer in cylindrical shape. Insulated by mineral/glass fibres, 10cm thick. Panels are made of aluminium sheets. The container is in used state, and has been drained and cleaned professionally. The heat storage tank has a separate connection pair (forward / reverse) for the heat supply (E.g. from CHP, boiler) and heat extraction (e.g. from a heating network). Thus, a real buffering is possible, and a temporary extraction higher than the thermal power of the heat generator, eg. to deal with heat peaks. Optionally and at additional cost more pairs of connection can be installed to connect another heat generator to this buffer. Flanges  ...

ATENA ROTOGRAVURE MACHINE WITH RDC10 ROTARY DIE CUTTERYear: 2007 (December)Machine designed for: PRODUCTION OF CIGARETTES PACKAGING, PAPER LABELS AND CARDBOARD PACKAGINGNumber of impressions: 12.136.991 mNUMBER OF PRINTING UNITS: 7 Serial number of the machine: 13347TECHNICAL SPECIFICATIONS OF THE MACHINESUBSTRATE PAPER/CARDBOARDSUBSTRATE WEIGHT 60-300 gsmMAXIMUM REEL DIAMETER 1800 mmMAXIMUM WEB WIDTH 660 mmMAXIMUM PRINTING WIDTH 640 mmMAXIMUM PRINTING REPEAT 760 mmMINIMUM PRINTING REPEAT 360 mmMAXIMUM ROTARY DIE CUTTING WIDTH 660 mmMAXIMUM ROTARY DIE CUTTING REPEAT 800 mmMINIMUM ROTARY DIE CUTTING REPEAT 535 mmAIR VOLUME 7000 m3/hAIR VELOCITY 40 m/sREGISTER ACCURACYPRINT TO PRINT ...

FOR SALE... NOHAB DIESEL F30 NEW & GENIUE SPARE PARTS AT TURKEY. HAVE A GOOD DAY SIR; WE VE NEW UNUSED SPARE PARTS OF NOHAB DIESEL F30 ENGINE AT OUR STOCK WE'VE MORE THAN 198 NEW ITEMS. PLS FIND SOME SELECTED ITEMS AS BELOW WE VE ALSO RECON SPARE PARTS. RECON PISTON 4 GROOVES (4 PCS piston SCHMIDT & 1 PCS MAHLE) 5 PCS RECON CYLINDER LINERS (WITH CLASS STAMPED) 5 PCS RECON CYLINDER HEADS FULL (WITH VALVES & SPRINGS) LLYODS STAMPED 2 PCS RECON FUEL INJECTION PUMPS BOSCH 12 PCS RECON OIL PUMP 1 PCS OVERHAULED COMPLATE FUEL INJECTORS 10 PCS RECON FUEL FEED PUMP 1 PCS . IF YOU HAVE ANY QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US. PLS FIND SOME NEW SPATE PARTS ITEMS LIST PISTON 4 GROOVES PISTON SCHMIDT 9198100965 1 LINER DNV TESTED ...