tetra pak a used for sale

Coordinate measuring machine Coord3 ARES NT 7.7.5 Year of manufacture: 2014 Motorized indexable head Renishaw PH10M hand controller: Renishaw MCU LITE-2 MPEe accuracy: 2.5 µm + L/300 Repetition accuracy: from 2.3 µm Measuring range: 700 x 700 x 500 (mm) Granite bed size: 1330x963.5x170mm Software: TouchDMIS 5.2 + dongle

Price 4.900+VAT (claimable)free loading on truck Injection molding machine Locking force 200t Distance between the spars 520 x 520mm Screws D.=50mm = Injection weight in hp 297gr. Machine very well preserved comes from medical equipment manufacturer Dissolution of injection molding department .with operating instructions and 2 discs. Viewing by e-mail appointment is desirable Sale only to traders and under the following conditions The machine is considered to have been taken over when it leaves the company, subsequent complaints cannot be taken into account So no guarantee and return.We do not assume any liability for compliance with all requirements mentioned in the UVV (accident prevention regulations)

Key data: 5 t, 150 mm

Hydraulic Press Atsugi AP-5-KL Used Load Range: 20-50 (kN) Stroke (mm): 150 Lower Speed ​​(Approach Fast Speed: 350 (mm/s) Lower Speed ​​(Under Pressure Slow Speed: 36mm/s Rise Speed ​​250 (mm/s) Working Area Open Height: 250mm Open Depth: 180mm Table Size: 450x50mm Motor Specification 3 Phase AC200V 4P 1.5KW Two-Hand Operation . Mobile Worktable Fuel Oil / Quantity Daphni Hydraulic 46/9L Total Weight (kg) 270 Body Size ​ Height (mm) 986 Width (mm) 485 Depth (mm) 920

in excellent condition Horizontal band saw machine AMADA CRH-300S manufacturer AMADA year of manufacture: 1975 Technical data Material: square 300x 300 mm Material: square 300 x 300 mm Max. material: round Ø 300 mm Max. machine load: 1200 kg Speed ​​27 - 95 m/min, infinitely adjustable Bimetal saw blade: 27 x 0.95 x 3660 mm single-sided receiving table: 0 - 400 mm Hydraulic rack and pinion vice for stack cutting saw band motor: 2.2 kW hydraulic pump motor: 0.75 kW Machine weight approx. 1.3 t Machine dimensions approx. 1625 x 1259 x 1200 m

Special price because without dukumentation / without disc without funnel +VAT (reclaimable) R1277 Injection moulding machine Arburg A 270 Hydronica D-Version Dialogica topZustand screw D 30mm with device for injection into the parting plane a viewing is desirable by appointment Sale only to traders and under the following conditions The machine is considered to have been taken over when it leaves the company, subsequent complaints cannot be taken into account So no guarantee and return.We do not assume any liability for compliance with all requirements mentioned in the UVV (accident prevention regulations).

Pneumatic diverter, electric, as good as new

Weinig Profimat 22N ATS four-sided planer Working width 220mm Working height 120mm Number of spindles 5 Spindle system: Bottom 5.5kw Rights Left 7.5kw Top 5.5kw Bottom 4kw Feed speed adjustable via variator 6-22m/min Feed motor power 2.2kw Height and width set via controller Input table length 1970mm

Copper Pot Still Adrian Edelbrande 1400 liters for Whiskey and Brandy This Adrian Pot Still is made of special high-quality copper which is highly polished. The helmet of pot is pear shaped and steam heated heating coil is inside of the pot. A pot still is used to distil flavoured liquors such as whisky or cognac, but not rectified spirit because they are bad at separating congeners. This pot still has internal seam coil heater and therefore is can be used only for distillation of mash without fruits and botanicals. Spirits distilled in pots top out between 60 and 80 percent alcohol by volume after multiple distillations. Condensing is made in in vertical tubular heat exchanger with operation is autonomically controlled with a thermostatic valve. Technical characteristics Made by Adrian Edelbrande Condition Totally refurbished in 2020 Fill capa ...

Two injection moulding machines are available. 1) Ferromatik K 110 1100-493, year of manufacture: 2000, clamping force: 1100kN, min. mould installation height: 300mm, max. opening stroke: 550mm, screw diameter: 40mm, injection volume: 201cm³. The control no longer starts up properly, probably due to the circuit board. Includes a 3-axis handling robot Remak. Without conveyor belt. 2) Arburg 270 M 500-90, year of manufacture: 1995, clamping force: 500kN, min. mould installation height: 225mm, max. opening stroke: 325mm, screw diameter: 30mm, injection volume: 70cm³. The cylinder is slightly leaking. Documentation available. An on-site inspection is possible.

Specifications: - Compaction pressure 10 bar - Volume flow 530 l/min - Power 4.0 kW - Current consumption 8 A - Voltage 400V, 50 Hz, 3~ - Speed 2,900 rpm

Key data: 850 kN, 40 mm

R1295Injection moulding machine ARBURG 320-850-210 Multronica Screw D=40mm Locking force 85 t.Converted from floppy disk drive to CL drive Viewing by e-mail appointment is desirable Sale only to traders and under the following conditions The machine is considered to have been taken over when it leaves the company, subsequent complaints cannot be taken into account So no guarantee and return.We do not assume any liability for compliance with all requirements mentioned in the UVV (accident prevention regulations)

Length of the rolling table: ca. mm Saw blade diameter: ca. 400 mm weight: ca. 900 kg Parallel stop: Stop sliding table: 1460 mm with stop extension to 2840 mm Star delta circuit has been renewed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data of the pallet rack stand: Shelving system: Alser Type: NS The scope of delivery includes: 01x Pallet rack stand, used Material colour: brown Profile dimensions: C 80 x 40 x 15 x 2.00 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( welded truss ) Height: 4,900 mm Depth: 1,050 mm General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Technical data of the pallet rack stand: Shelving system: Alser Type: NS The scope of delivery includes: 01x Pallet rack stand, used Material colour: brown Profile dimensions: C 80 x 40 x 15 x 2.00 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( welded truss ) Height: 2,500 mm Depth: 1,050 mm General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Technical data of the pallet rack stand: Shelving system: Alser Type: NS The scope of delivery includes: 01x Pallet rack stand, used Material color: blue Profile dimensions: C 80 x 40 x 15 x 2.00 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( welded truss ) Height: 2,500 mm Depth: 1,050 mm General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Key data: 500 mm

Machine Type: CNC Machining Center/Milling Machine Manufacturer: AXA Type: VSC0-500 Year of Make: 1989 Condition: used Offer will only be sent if a complete imprint is provided! Price VB Location Warstein , Germany Reference M-AXA-0825 DESCRIPTION We offer you a used CNC machining center from the manufacturer AXA. Available from week 37 / 2025. - Fourth axle - Tool holders - Plenty of spare parts and fourth axle from a sister machine Machine weight 3t more technical data will follow! Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved!

Key data: 500 mm, 400 mm, 400 mm

FP 4M lid with 3-axis active digital display, Table clamping area 800 x 460 mm Travel X / Y / Z 500 / 400 / 400mm Spindle speed 50 - 2500 rpm Feed rate 8 - 630 mm/min Rapid traverse 1500 mm/min Quill stroke 90 mm  Tool holder SK 40 Hydraulic Tool Clamp Incl. accessories as shown

x-travel: 620 mm y-travel: 420 mm z-travel: 400 mm Control: Heidenhain TNC 410M table surface area: 800 x 400 mm tool taper: ISO 40 spindle turning speed - stepless: 50 - 4000 U/min main drive motor: 5,5 kW total power requirement: kW weight of the machine ca.: 2,1 t dimensions of the machine ca.: m CNC control HEIDENHAIN TNC 410M Coolant equipment Machine lamp The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 500 mm grinding width: 200 mm workpiece height: 300 mm total power requirement: 1,5 / 2,2 kW weight of the machine ca.: 1,6 t dimensions of the machine ca.: ,6 1,5 1,8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Aircooled chiller AERMEC ANL080 Y 20.35 kW Cooling capacity: 20.35 kW / 5.79 tons (12/7 — 35°C) Year of manufacture: 2019 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. COPELAND ZH19K1P-TFW-524 (scroll) Type of refrigerant: R410a Number of fans: 2 pcs. Dimensions: 1.12x0.55x1.25 m. Weight: 120 kg. Working hours: 7000 h. Condition: Good

Aircooled chiller AERMEC ANL102 Z 26.3 kW Cooling capacity: 26.3 kW / 7.48 tons (12/7 — 35°C) Year of manufacture: 2019 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 2 pcs. PANASONIC C-SBP160H38B (scroll) Type of refrigerant: R410a Number of fans: 2 pcs. Dimensions: 1.75x0.75x1.45 m. Weight: 270 kg. Working hours: 8000/8000 h. Condition: Good

Condition: in working order, well-maintained Availability: immediately Connection voltage: 400 V Frequency: 50 Hz Power: 16.3 kW Current: 31.8 A

Atlanta wrap around carton packer mod Giotto Manufacturing year 2015 Capacity : 20 cartons per minute for 1.5L PET bottles and 16 cartons per minute for 1.0L PET bottles Wrap around case packer - entry on single lane Processing neutral or printed cartons Cartons sizes currently processed: 80 x 262 for 12 bottles1.5L and 87 x 322 for 16 bottles 1.0L Siemens S7 machine drive with touch screen User friendly HMI interface CE electrical panel Machine recently dismantled and stored dry and clean. Machine in very good condition. Available immediately

Grinding area: 600 x 400 mm Magnetic table Coolant tank various grinding wheels

Corner forming machine

Capacity: 250kg, all parts that come into contact with the product are made of V2A stainless steel, features: anchor with potentiometer, propeller agitator, two-stage pump, cleaning spray head, no type plate. On-site inspection is possible.

An almost like-new injection moulding machine Arburg is available. Clamping force: 1600kN, tie bar distance: 520mm, clamping stroke: 364mm, ejector stroke: 150mm, ejector force: 40kN, injection unit: 400, injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 6000mm/1800mm/2200mm, weight: approx. 6000kg, control: Selogica, operating hours: approx. 67h. Includes enclosure with clean air supply FilterFanUnit and removal robot. Documentation available. An on-site inspection is possible.

x-travel: 6000 mm y-travel: 3000 mm z-travel: 1000 mm Control: HEIDENHAIN TNC 640 table surface area: 6000 x 3000 mm table weight: 8000 Kg/m² rapid traverse X-axis: 60000 mm/min rapid motion - y-axis: 60000 mm/min number of spindle speeds: 15000 U/min/rpm Spindle power: 35 / 42 kW taper ISO: HSK A 100 distance between columns: 3000 mm distance spindle nose and table: 280 - 1280 mm A-Axis: +125 / -125 ° c-axis: 360 ° total power requirement: - kW weight of the machine ca.: 65 t dimensions of the machine ca.: - mm - CNC control Heidenhain TNC 640 - Universal milling head 2-axis - 5-axis automatic Compensation system - Automatic tool changer 40-fold (HSK 100) - Internal spindle cooling - Blum tool measuring system - Blum workpiece measuring system - Heidenhain linear scales - Portable handwheel - Chip conveyor The data for this ad was created with ModulMWS - the software solution of Lo ...

Type: ASP400HDN Serial number: 03137230 Year of construction: 2019 Belt width: 410 mm Belt speed: 2 - 15 m/min Product thickness: 2 - 45 mm Power: 3 x 400V, 50Hz, 4kW Dimensions: 2150 x 850 x 1450 mm Weight: 570 kg

Process chiller / chiller air-cooled, Type: Aries TECH AST2 115 U MTA S.p.A. The Aries TECH AST2 115 HE are compact chillers suitable for outdoor installation (from -20°C to +48°C) with shell and tube evaporator, four scroll compressors, compressor shut-off valves, crank pan heater, phase monitoring, P3 double pump, tank 598 litres, electric antifreeze heater, condenser filter and control and control cabinet. Cooling capacity (kW): 315 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h): 53.8 Available. Pump pressure (bar): 2.99 Ambient Temperature (°C): 32 Refrigeration circuit: Refrigerant R 410A Refrigeration Circuits (Quantity): 2 Compressors (quantity): 4 Power levels (%): 0-25-50-75-100 Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW): 158 Max. Current (A): 262 Starting Current Circuit (A): 507 P ...

• Clamping Force: 80 tons (800 kN) • Screw Diameter: 35 mm • Shot Weight (PS): 165 grams • Tie Bar Spacing (H × V): 420 mm × 420 mm • Opening Stroke (Max): 450 mm • Minimum Mould Height: 250 mm • Maximum Daylight (Platen Distance): 700 mm • Control System: Selogica • Power Consumption: 29.9 kW • Machine Dimensions (L × W × H): 5,200 mm × 1,600 mm × 2,200 mm • Machine Weight: 3,800 kg

Key data: 600 kN, 132 g/PS, 35 mm

Arburg 320C-600-250 Injection Moulding Machine (241) Ability to work vertically Number: 241 Availability: in stock Year of production: 2008 Producer: Arburg Condition of Injection Molding Machine: Used Screw diameter [mm]: 35 Injection weight [g]: 132 Injection pressure [bar]: 1820 Clamping force [kN]: 600 Gap spacing [mm]: 320×320 Panel size [mm]: 446 x 446 Min. mould height [mm]: 200 Control Type: Selogica Tongue: German Installed power [kW]: 23.9 Working hours [h]: 74753 Weight [kg]: 2330 Dimensions [mm]: 3500×1500 Feed hopper: NO Robot Socket: Yes Core String: 1x

A package of eleven Dyeing Machines is available, 1) 5x Dyeing Machine Airflow AFT 225, 2) 1x Dyeing Machine Then AFS 50, 3) 1x Dyeing Machine Then AFE 50, 4) 1x Dyeing Machine Fongs HST 130/32, 5) 1x Dyeing Machine Then DN 200, 6) 2x Dyeing Machine Then OFHT 170. An on-site inspection is possible.

For sale is a used pelletizing line that has pelletized fertilizers based on wood fibers with cattle manure and fermentation residues in the last 4 years (approx. 5,000 h in total). Various well-known manufacturers are installed such as Amandus KAHL pellet mill / continuous mixer, Bühler hammer mill / conditioner, CPM pellet cooler, Wynveen pellet screen, Rako / Apullma conveyor technology Achievement: 1. Wood chips with cattle manure, dried approx. 1.5 t/h 2. dried, separated compost / dried digestate approx. 2.5 t/h 3. According to the manufacturer KAHL, the press can produce up to 3 t/h in the biomass Since the customer is now converting his business, it is for sale. In principle, the aim is to sell the entire line, a partial sale of the components is also possible by arrangement. The main components are: -Conveyor - Grinding: Hammer mill with screen drum, 2-fold ma ...

Recycling plant/recycling plant General information • Plant type: PET sorting and washing system for the production of PET flakes • Manufacturer: STF-Maschinen & Anlagenbau GmbH • Year of construction: 2023 • New value EUR 4,970,000.00 • Market value (at location): EUR 3,052,000.00 • Installed in two connected halls incl. foundations • Plant currently not in operation (standstill since 11/2024) Technical key data • Max. configuration: 2,000 kg/h • Max. achievable output in continuous operation: 600 kg/h • Output in test run with good material: >1,500 kg/h • Energy requirement: 650-680 kWh (without hot washing system) Stages of the procedure 1. Feeding of PET material (pressed bales) 2. Coarse sorting via sieve drum 3. Magnetic separation of metallic impurities 4. 2-stage sensor sorting (materials) 5. Manual sorting via sorting belt 6. Mill and  ...

Key data: 25 kp, 150 , 120

Rated power at 50%ED: 25kVA Short-circuit current: 12kA Electrode force: 120daN / single stroke Projection: 150mm --- Welding Control: AR.01 (5 times, 2 program) --- Incl. additional options: -Foot switch -Main switch - Mounted on aluminium plate --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

ABB Turbocharger RR151-14 Spare part of a Jenbacher JW612 from 2006, 1 available Manufacturer: ABB Model No.: RR151-14 Type: Turbocharger (one JW612) Serial Number: 834401 n (Mmax) [1/s]: 1052 n (Bmax) [1/s]: 999 t (Mmax) [°C]: 710 t (Bmax) [°C]: 680 Year of Make: 2006 Weight / transport weight [kg]: 115 / 150 Transport dimensions [m]: 1.20 x 0.80 x 0.80

Working range: 1.050 x 650 x 250 mm max. workpiece weight: 400 (800) kg control: Agievision AGIE max. conicity: 30° / 100mm travel -x axis: 500 mm travel -y axis: 350 mm travel -z axis: 426 mm travel U x V-axis: +/-70 / +/-70 mm rapid traverse X-axis: 3 m/min rapid traverse Y-axis: 3 m/min rapid traverse U-axis: 0,6 m/min rapid traverse V-axis: 0,6 m/min rapid traverse Z-axis: 0,6 m/min wire dia.: 0,2...0,33 mm total power requirement: 12,1 kVA weight of the machine ca.: 3,9 t dimensions of the machine ca.: 2,8 x 2,4 x 2,3 m Documents: Wire Eroding Machine AGIE - Agiecut Progress 3 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Brush kit and rollers Agfa Elantrix 95 SX; used. Brush Kit and rollers for Agfa Elantrix 95 SX; condition used.

Fiber laser cutting machine Type: LT 9 Manufacturer: BLM Adige-SYS Year: 2013 Control: Siemens Sinumerik Laser: IPG YLS 3000 Precitec ProCutter head Machine hours: 30000 Table: 1500 x 3000 mm Max plate thickness: 20 mm Min plate thickness: 0,5 mm The machine includes a license and software for creating Lantek cnc programs. In good condition, fully functional. Find more here - / Contact us at -

stroke: 600 mm hydraulic: ja : keins dabei weight: 3,7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

X-axis: 400mm, Y-axis: 250mm, Z-axis: 256mm, max. workpiece weight: 400kg, max. workpiece dimensions: 580/860/250mm, support surface: 680/500mm, min. start hole diameter: 2mm, cutting rate: 185mm²/min, generator: Agiplus-MMD, control: Agimatic CF20. With dielectric processing unit DA-15/C. The display power supply is defective. The machine has already been dismantled, an on-site inspection is possible.

length: 880 mm weight: 60 kg height: 320 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Manufacturer: ARO Type: M 302 Year of Make: 1971 No. 1063655 380 V ~ 50/60 Hz E 100 100 All information is made to the best of our knowledge, errors excepted. The sale is subject to exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the Seller's duties or to any injury to life, limb and health. Further legal Information can be found on the website of Witzenmann GmbH under the keywords "Imprint", "Terms and Conditions" and "Data Protection".

This 2015 TOMSA DESTIL Alcohol Dehydration Plant is designed for the large-scale production of high-purity ethanol. It processes distilled alcohol (95.5% v/v) into dehydrated alcohol with up to 99.8% v/v concentration, suitable for beverages, industrial applications, or biofuel. The plant has a nominal capacity of 90,000 liters per day and operates with advanced molecular sieve technology using pressure swing adsorption (PSA), ensuring high efficiency, low energy consumption, and fully automated operation. Condition & Usage The plant was barely used and only produced 2,000 m³ of dehydrated alcohol during its operation, leaving the equipment in excellent condition. Key Features - Capacity: 90,000 L/day dehydrated alcohol (99.8% v/v). - Feedstock: Distilled alcohol at 95.5% v/v. - Technology: Molecular sieve dehydration with PSA system. - Fully automated and continuous operation. Fi ...

With new stainless steel mesh New bearings Sale without giarentee, as is, where is For more information please sent inquiry

Reference ID PP-50993 Category 4-Colors Manufacturer Adast Model Polly Prestige 474 Year Built 2004 Color 4 Impression 117 Working Hours - Speed-- Max. size 52x74 cm Min. Size - Condition Good Location Europe Availability Immediately Machine Description 4 colors Alcolor dampening CIP4 IR dryer semi automatic plate change straight machine Roller and Blanket wash Impressions: 117 million

The machine is in good technical condition, after prior agreement it is possible to test it. X 750mm, Y 500mm, Z 600mm. Spindle speed 10 thousand, tool magazine 22 positions, chip conveyor, cutting fluid filtration, iTNC 530 control system.. double machining center (3 axes and 5 workplace axes) AXA DBZ with rotary table SRTA2-300

The machine is in good technical condition, testing possible after prior agreement. Table dimensions: 700 x 450 mm Z-axis travel: 255 mm Y-axis travel: 250 mm X-axis travel: 350 mm MACHINE DIMENSIONS: L: 2100 mm x W: 2000 mm x H: 2200 mm