tee used for sale

Description: Change Gears/Gears: This 32-piece steel change gear set consists of: Gears with the number of teeth from 20s - 149s Approx. Onsite Dimension. (l x w x h): 400 x 250 x 200 mm, weight approx.: 50 kg

Machine : Cutter Heads Make : Coromant, Walter,.. The cutter heads are used and partly as good as new. φ 400 , Coromant, T-Max , 26 teeth, No. 705420, cassettes 265.2-828, as good as new, none Signs of wear, € 300,- A- Ø 100 2 pcs. Sandvik, €150,- C- Ø 500 1 pc. WALTER OO F244 , as good as new € 200,- D- Ø 400 1 pc. WALTER RH F244 gebr. good € 200,- 1 pc. WALTER OP F244 € 200,- slide. 100mm Sandvik Price : VHB or against bid ! Maybe it can also be used as decoration. Entrance area outdoor area !

General SKU232W251 LocationBarneveld MakeIKA Werke (D) TypeProcess Pilot MK 2000/4- ATEX No.11-7888 Year of construction2011 Main Features MaterialStainless steel Motor2.2 KW Inlet diameter25 mm Specified Features - Colloid mill Colloid millcheck Rotor sizesDia. 40x60 mm and Dia. 63x38 mm Cross teethed rotorcheck With jacketcheck With hoppercheck 27 Ltr. InletDN25 OutletDN15 Motor2,2 kW 200-240/380-420 Volt Speed3 170 - 13 789 rpm (20-87 Hz): 7 923 rpm (50 Hz) MaterialStainless steel 1.4571 (316Ti) Information Mounted on wheelscheck With switchgearcheck Total height1,45 m Weight250 Kg CEcheck Floorspace0,8x0,55 m ATEX compatiblecheck Extra SpecificationsWith mechanical seal tankbrand: Aerni AR139SN: 10020/278,max. pressure: 25 barThis machine comes with 2 rotors.1 colloid rotor Dia. 40x60mm1 pump rotor Dia. 63x38 mmNew arrivalsColloid millsIKA WerkeNew arri ...

TWIN-SHAFT HYDRAULIC SHREDDER, Hopper size: 2.5 x 1.8 x 1.2 m (or customised), construction in robust high thickness carbon steel, shredding surface 1.500 x 1.100 mm, 2 counter-rotating steel hexagonal shafts with differentiated speed 16-21 rpm, no. 30 blades, 50 mm, 2 teeth, very easy blade maintenance, welded profile connection frame 1.3 x 1.0 x 1.5 m approx., No. 2 gearboxes, No. 2 electric motors 37,5 kW ( 100 Hp) total power - 400 V/50 Hz, bearings strategically positioned so as not to be affected by the processed material, the bearings are connected to a centralised lubrication point that can be connected (as an option) either to an automatic lubrication system or to a manual greasing point where the operator can intervene regularly., hydraulic control unit,, electrical control panel with PLC and machine wiring, automatic overload reversal with programmable number of reverse cycles ...

Description: Rotary Hoe Head: R2 MTZ 135 Working width: 122 cm Total width: 132 cm Number of teeth: 14 Depth: 16 cm Features: Equipped with adjustable leveling plate for the crumbler roller and height adjustment with rotary lever. Approx. Onsite Dimension. (l x w x h): 1,320 x 1,000 x 500 mm, weight approx.: 205 kg

Description: Control type: CNC, control name: Siemens Sinumerik 840 C Technical details: Workpiece diameter at ratio 1:10 300 mm, workpiece diameter at ratio 1:1 212 mm, number of teeth - max. 200, number of teeth - min. 6, x-travel 300 mm, X - axis speed 0.1-5,000 mm/ sec., y-travel 400 mm, Y - axis speed 0.1-5,000 mm/sec., A - axis -170 / +170 °, total power requirement 38 kW, machine weight approx. 10 t, space requirement approx. 4.20 x 2.20 x 2.10 m weight approx.: 10,000 kg, Approx. Onsite Dimension. (l x w x h): 4,200 x 2,200 x 2,100 mm

Description: VIN: HHKHZ701CC0000294 engine: CUMMINS QSB6.7 engine power: ,121 kW / 165 HP ,/ 1900 rpm working hours: approx. ,8948.6 hrs. width of the pads: 600 mm length of the stick: 3100 mm digging bucket with teeth width of the bucket: 1250 mm piped for hammer, shear and clamp AM/FM Radio  , please also have a look at the video of this excavator serial number: HHKHZ701CC0000294, Approx. Onsite Dimension. (l x w x h): 1,000 x 3,050 x 3,600 mm, Motor manufacturer: CUMMINS, Motor type: QSB6.7, Blade width: 1,250 mm, weight approx.: 25,000 kg

max. wheel diameter:400 mm max. module:10 min. module:0,3 weight of the machine ca.:11,5 t dimensions of the machine ca.:3,3 x 2,75 x 2,8 m max. number of teeth:999 min. number of teeth:5 Width of teeth:0-300 mm pressure angle max.:30 pressure angle min.:14 workpiece weight max.:300 kg worm grinding diameter:300...205 mm width of grinding worm:125+0,7 / -0,5 mm boring diameter:160 H7 mm with loading device FELSOMAT Type: FZ250 Year of construction: 2002 No tail stock

max. wheel diameter:275 mm gear width:55 mm max. module:6,5 min. module:1,5 Face Hobbing-Continious Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be ?prepared? for the individual part procedure. I.e. direct measuring system + part gear brake, w ...

max. wheel diameter:280 mm max. module:7 weight of the machine ca.:13 t table turning speeds:100 U/min table diameter:250 mm min. number of teeth:4 hob turning speeds:1500 U/min max. hob diameter:160 cutter length max.:230 mm Machine in good condition. Available 01.08.2024

max. wheel diameter:180 mm max. module:5 min. module:1 weight of the machine ca.:14 t dimensions of the machine ca.:4,5 x 2,84 x 2,8 m min. number of teeth:7 toolpiece turning speed range:4000-10000 U/min tool length:210 mm With tail stock No dressing device Only CBN