Qty. 1 Second-hand vertical powder painting line for Aluminium profiles Mfc.: Trevisan Cometal Built: 2007 Type: IV/7.00 Profile dimensions: 7000 x 150 x 200 mm - H x W x D Weight of profiles: 25 kg/each max. Total weight onto the chain: 10,000 kg Weight distributed linearly for only 1 meter: 50 kg/m of chain Conveyor speed: 1.5 m/min. Temp. in the polymerisation furnace: 170÷195 °C Rated hanging pitch along the chain: 66/100/133/200 mm Scope of supply: Pre-treatment tunnel Drying oven Painting system Cleaning system Infrared oven Polymerisation oven Descending chain conveyor Transport system

Qty. 1 Second-hand billet foundry plant Mfc.: Cometal SA Built: 1989-2008 Stopped: 2014 Billet size: Dia. 145 – 152 – 178 – 203 – 228 – 254 mm Length: 7.0 m Tolerances: Dia. + 0, -2 mm Length: +/- 30 mm Deflection: 2 mm per 1000 mm  ...

• more information

QTY. 2 CONTAINERS, OD 655 x ID 250 MM x 560 MM LONG & OD 522 x ID 180 MM x 560 MM LONG, PIRCER DIA. 63 MM,  ...

• more information

1、Product size: PP melt blown fabric with width at 500mm(after trimming 175mm2pcs) 2、Main Material: PP compounding material(we will supply formula and operation video after order) 3、Extruder type: SJ65/30 single screw extruder 4、Output capacity: 300-400kg/24hour (24hours) 5、Electric power supply: 3phase, 380V;50Hz(customized) More data available if needed

Berstorff Strainer Extrusion Line Consisting of: Extruder Supplier Berstorff Type GE 150KSx16D Year of construction 2007 Pins: 12 Pins per level: 8 Condition: good Weight approx. 10000 kg Screen change: hydraulic, bladder accumulator 20lt / 300Bar D = 200mm Gear pump Supplier: Maag Pump Systems Type: extrex® 110-5 RV Volume 716 cm³ / rev Year of construction 2013 Condition: good Heaters Supplier: Regloplas Type P140 Year of construction various Number 5 pcs. Cooling bath Cooling medium Water above, 2 rows below with 4 fans each Year of construction 2006 Condition: good Dimensions 9m Weight approx. 500 kg Especially 8 fans Installation tape Year of constructio ...

1) Wood pulveriser input 12mm out put 150mesh 2) hot mixer max temperature 120dg capacity 100 kg per pach(15 mints each pach) 3) PE pruvolizer (from granules to powder) capacity 200 kg per hour 4) Crusher capacity 500 kgper hour 5) Wpc pelletizing extrotion line capacity 300 kg per hour 6) Extrusion line to make wpc wall and decking capacity 42 mters per hour including cooling table and cutting table and dropping area. This factory includes all the necessary tools and accessories, it is almost new in condition, built in 2021. It has produced 5000sqm of product

TECNOVA EXTRUSION LINE 130 mm.500 kg/h, PE PP PC PS ABS PET PA, Including:, Scrap silo, Extraction auger, Crammed feeder, Extruder with 130 mm screw diam.37 L/D, N. 1 vacuum degassing pump, 225 kw drive, Semi-automatic non stop screen-changer with screens diam.250 mm., Available with a [FIMIC RAS 400](https://www.germanplast.eu/listings/5241333-used-2007-fimic-ras-4 00-automatic-screenchanger), Water ring pelletizer, Drying centrifuge, Pneumatic extraction for granulate, Constructed in 2004, not working from 2010, Offered reconditioned (various steps to be agreed upon), (see how we recondition on our WHAT WE DO page on top)

Hydraulic Press 400 ton Nominal Power 400 ton Slide Stroke 800 mm Slide dimension 1300 x 1600 mm Table dimension 1300 x 1600 mm Cushion Stroke 350 mm . ELECTRICAL SYSTEM COMPLETELY REBUILT IN 2020  ...

• more information

Custom made Overall dimensions: 800 x 900 x 1700 mm Table size: 340 x 240 mm Opened height: 340 mm Stroke: 260 mm Working pressure: 180 bar  ...

• more information

Głowice do wytłaczania - pakiet 19 sztuk różnych narzędzi, m.in. Kalibrator głowicy + płyty Głowica + kalibrator 2 x 130 Głowica 250 mm + kalibrator Austria Głowica + kalibrator Duża głowica rozszerzająca + kalibrator Mała głowica rozszerzająca + kalibrator Głowica + kalibrator dla Soffit 2 x 160 głowic Głowica parapetu 260 mm cena za wszystkie narzędzia 60.000 Euro.