tal used for sale

Blender Talsa MIX95P; 400 V, new, Bowl capacity 95 litres, engine completely in stainless steel, separate stirrer and Bowl drive, 1 speed, forward and return, Bowl tilt, Dimensions Lxwxh approx. 108x80x120cm, weight 170kg New machine, built in 2018

Mobile, works and runs, engine makes ticking noise and needs to be checked

CL20 gear pump manufactured by TALLERES PUJOL.

USED STAINLES STEEL 316L TALLERES MORES 10,5 M2 TUBULAR EXCHANGER REF.: C6296 General characteristics: Manufactured by TALLERES MORES2 Type Tubular exchanger Material Stainless steel 316L Year built 2000 Technical characteristics: Exchange surface 10,5 m2 Tubes passes 2 Casing passes 1 Tubes length 2490 mm Casing diameter 300 mm

Positive displacement rotary pump (rotary pistons) model PR230 manufactured by TALLERES PUJOL. This type of pump allows any type of liquid to be driven, even slightly abrasive liquids with pressures of up to 10 bar.

Positive displacement rotary pump (rotary pistons) model PR230 manufactured by TALLERES PUJOL. This type of pump allows any type of liquid to be driven, even slightly abrasive liquids with pressures of up to 10 bar.

Main characteristics: Stainless steel construction, solid construction; Capacity – 35 l.; Maximum capacity – 30 kg; 400 V, 3Ph, 50 Hz, 1.1 kW; 3 filling funnels for it are offered in the price: 12 mm., 20 mm., 30 mm.; Automatic process - starting and stopping the motor from a contactor when the knee lever is pressed; High working pressure, suitable for dense and cold mixtures; Easy speed adjustment; Automatic piston decompression; Automatic lid locking; Automatic knee lever until it reaches a lower position; Hydraulic oil tank with oil level indicator Motor thermal protection Easy disassembly, allows quick access to all parts and their cleaning. The round shape of the cauldron is precisely made with the corresponding diameter for an easier work process High pressure for thick and cool mixtures; Plates and rings with long wear life;  ...

Stock # UG6356 Second hand microwave sterilization tunnel for continuous operation made of stainless steel of Chinese production, model TL-80. The tunnel consists of 10 sections with a total of 112 Panasonic microwave lamps. The power is adjustable from 0 to 80 kW. The 740 mm wide teflon belt has an adjustable speed in the range of 0 to 10 m/min. Maximum product height up to 60 mm. Machine is equipped with a dust collector system and computer control. Tunnel dimensions: length 14,900 mm, width 1,665 mm, height 1,750 mm. Year of production 2015. Includes technical documentation in English.

Product number: 2723 Type: MIX80P Serial number: 224635 Year of construction: 2002 Mixer: 80 litres Power: 3 x 400V, 50Hz, 0.75kW Dimensions: 700 x 900 x 1100 mm Tiltable bowl, 1 speed left and right

Stainless steel flowpack completely from TALLERES MAYMA Description Flow pack machines owe their name to how the product packaging process is developed: the machine creates a plastic tube from a flexible sheet and the product passes through it until it reaches a jaw that delimits the beginning and the end of the package. The operation concept of the flow pack machine is quite simple.1. Stainless version. 2. Vertical plate construction for maximum hygiene and machine cleaning. 3. Accessibility to mechanisms from the rear. 4. Sense of work from right to left. 5. Rotary welding jaws. 6. Three pairs of longitudinal drag rollers, welding and folding the film with height adjustment system. 7. Self-centering bobbin holder with brake. 8. Power car of 2.3 m length. 9. Universal forming tunnel. 10. Parameter setting (format length, speed ...). 12. Photoelectric cell for printing centering. 13. C ...

Description: A total of 2000 kW generated since installation. 1 generator is included in the installation See PDF for details Approx. Onsite Dimension. (l x w x h): 9,000 x 1,500 x 1,500 mm, weight approx.: 1,100 kg

Talsa mobile mixer, model: MIX80P, serial number: 224635, year of construction: 2002, 400/225 V, 3 Ph, 50 Hz, 2.35/4.1 A, 0.75 kW, volume: 80 liter, dimensions: 650 mm x 900 mm x 1150 mm.

4 radios incl. accessories

Submersible pump, coolant pump BRINKMANN TAL901/770-G immersion depth = 770 mm pump base = 200 mm pump flange = 250 mm Q = 600 l/min H = 12 m Engine: 2,2,6 KW 230 / 400 V used, tested ! 1200 x 500 x 250 mm

X 417 | CAPPER AROL TALOG YEAR: 2017 SPEED: 15.000 BPH DIRECTION: CLOCKWISE 6 HEADS MODEL: EURO VA 6 CAP: TALOG PLC SIEMENS S7 WORKING HOURS: 210 AVAILABLE MANUALS: YES SAFETY PROTECTIONS

Silver coin Samoa 10 Tala 1991 proof Olympics 1992 Shot put, silver .925 31.1 gr, encapsulated, KM82

Silver coin Tokelau 5 Tala 1993 proof Fijian iguana, silver .925 31.47 gr, tarnished, encapsulated, KM17

TAKAMAZ LX 15 + IEMCA TAL 65/32 bar feeder Machine completely overhauled in 2018 (8500 hours worked since 2018) Very good condition

Bar Loading Magazine/Tal AUTO 65-32 LxWxH approx. 5000x1000x1500mm Weight approx. 600 kg Control via CNC machine (was mounted on a Traub-CNC machine) B0doi8oziq Rods diameter approx. 5-65mm Pole length approx. 4 meters Height adjustment approx. 1000-1300mm Power supply 380 volts Max. feed travel approx. 4000mm Max. rod weight approx. 150 kg

Horizontal arch feeder type TAL 400 on request with base frame (for an extra charge)

Roundness Tester Brand: Taylor Hobson Type: Talyson 3 Year of construction: 1974 Operating instructions Calculator Data backup discs All information without guarantee

Working range X mm: 7200 Working area Y mm: 2010 Working area Z mm: 300 No. 2 working areas mm: 2700 x 1500 Main motor kW: 11 Tool change stations 12 Machine table: console table Speed max rpm: 18000 Tool clamping system: HSK 63F Number of consoles 8 Vacuum pump: Yes Total connection kW: 78 Weight Kg: 12,300

Time relay, safety time relay, safety control, timer, timer -Manufacturer: Grässlin, timer unused in original packaging -Type: talento 121 01.28.0003.1 -Voltage: 220-240V / 50Hz -Quantity: 5x timer available -Price per piece -Dimensions of box: 95/60/H85 mm -Weight: 0.2 kg/pc.

Rod diameter 65 mm rod length 3200 mm

CABLE POWDERING MACHINE FOR ELECTRICAL CABLES EXTERNAL DIMENSIONS Length : 1.000 mm Width : 1.000 mm Height : 2100 mm CABLE PASSAGE Size : 100 mm diameter Height from ground : 1.000 mm Cable insulation material : PVC, PE, XLPE to be used Cable size to be powdered: 5–70 mm diameter HIGH VOLTAGE UNIT Input voltage : 14V 16kHZ Output voltage : 100 kV Max. current : 120 µa Polarization : Negative TECHNICAL SPECIFICATIONS OF THE MACHINE Input : 220V 50 Hz Installed power : 1 KW Extraction fan : 3.000 m³/h 0,75KW Vibration : 0,15KW 220V Compressed air : 6-10 bar Air consumption : 300 lt/min Filtration : 320x300mm polyester filter Filter cleaning : Automatic Powder recycling : Vibration sieve Powdering method : Application by 2 electrodes, electro static application

rotary table dia.: 300 mm Measuring range: height: 500 mm diameter: 320 mm weight of the machine ca.: 320 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

C275 D5 Enclosed A049K225 Genset Model C275 D5, 275kVA Standby, 250kVA Prime, QSL9G5, Diesel, Enclosed Emergency Standby Power (ESP) Emissions Level : TAL 4g Local Codes and/or Regulation : CE Output Voltage : 400/230, 3 Phase, Wye, 4 Wire Engine QSL9G5 Engine Air Cleaner - Duty Rating : Normal Duty Engine Coolant Heater : 240V Sub-Base Anti-Vibration Mounts None Supplied Main Generator UCD274K, 12 Leads, 50 Hertz (Hz), 190 - 208V and 380 - 416V, 163C, Emergency Standby Power (ESP) Generator Accessories Voltage Regulator - Torque Match Main Generator Heater : None Supplied Genset Housing Sound Attenuated, Steel, Munsell Green Exhaust System Silencer Grade : Enclosure Critical Cooling System Genset Mounted Radiator, 50C / 122F, Genset Mounted Engine Coolant Mixture : 50% Antifreeze, 50% Water ...

C330 D5 enclosed A048T878 Genset Model C330 D5, 330kVA Standby, 300kVA Prime, QSL9G5, Diesel, Enclosed Emergency Standby Power (ESP) Emissions Level : TAL 4g Local Codes and/or Regulation : CE Output Voltage : 400/230, 3 Phase, Wye, 4 Wire Engine QSL9G5 Engine Air Cleaner - Duty Rating : Normal Duty Engine Coolant Heater : 240V Sub-Base Anti-Vibration Mounts None Supplied Main Generator HC4D, 12 Leads, 50 Hertz (Hz), 190 - 208V and 380 - 416V, 163C, Emergency Standby Power (ESP) Generator Accessories Voltage Regulator - Torque Match Main Generator Heater : None Supplied Genset Housing Sound Attenuated, Steel, Munsell Green Exhaust System Silencer Grade : Enclosure Critical Cooling System Genset Mounted Radiator, 50C / 122F, Genset Mounted Engine Coolant Mixture : 50% Antifreeze, 50% Water  ...

Qty. 1 Second-hand gas heated log furnace including hot shear Mfc.: ELHAUS Type: L250-90/135/4FK – WS250BD Built: 1999 Log dia.: 10” – 254 mm Log length: 5 – 7 m Billet length: 650 – 1300 mm Min. shear temperature: depending on the alloy approx. 340 – 400 °C Log temperature max.: 530 °C Heated by natural gas Hu=8.600 kcal/Nm³ Gas consumption: 234 kWh/tAl – 23.5 Nm³/t Al El. power: 130 kW Number of heating zones: 4 Number of circulating zones: 3 Dimensions of the furnace: 14.75 x 2.2 x 3.9 m - L x W x H Hot shear Recoil pressure: 0 – 100 bar Recoil stroke: 1.85 m Shear force: max. 1.69 MN at 210 bar Shear stroke: 360 mm Output pressure: max. 160 bar Output stroke: 325 mm Closing pressure: 210 bar Spreading stroke: 2 x 4.0 mm Dim.: Height above hallway: 2.9 m Length over everything: 3.95 m Width over everything: 2.65 m Hydraulic station Max. ...

Control: Fanuc 21-T + Staff feeder IEMCA TAL 55/32 (3-65mm) Turret: 8 tools Incl. documentation Incl. video Lathe dimensions: 2200x1000x1620mm Lathe weight: 750kg Bar feed dimensions: 3490x600x1300mm Bar feed weight: 500kg Staff supply has not been tested

Specifications: Uniform spindle spacing: 32 mm Number of spindles: 23 Distance between the first and last spindle on the drill head: 672 mm drilling depth: 80 mm Table size: approx. 900 x 545 mm size of the workpiece: 800 x 2500 x 100 Working pressure: 0.6 MPa Air consumption: 10 NL/cycle Voltage, frequency: 400 V/50 Hz Spindle speed / min.l: 2800 rpm. Motor power: 1.5 kW Weight ca: 400 kg Dimensions: 1220 x 1065 x 1400 mm Patented spiral system Programming and adjustment devices of horizontal and vertical Drilling depth. Pneumatic drill head shears Drill head frame of 0-90 degrees with blocking in any position and reference switching angle with each angle Head with quick-connect spindles (the quick-release buckets are a Zubehoer). 5 quick-release buckets are standard. 2 patented pneumatic pressure devices accident-protected. 2 side connectors on the table ...

Emergency generator set 200 kVA Volvo / WA-V 200 S Machine Execution: Unit type: Stationary Design: Soundproofed Technical data engine: Engine manufacturer: Volvo Engine type: TAD 733 GE Engine No.: 5312956418 Motor power: 201 KW Cooling: Water-cooled Power: Electric 12 V DC Speed: 1,500 rpm Fuel: heating oil or diesel B7 Technical data generator: Generator manufacturer: Leroy Somer Generator type: TAL 044 M M 6S/4 Gen.Nr.: 39786300005 Generator capacity: 200 kVA Voltage: 400 / 231 volts Power factor: cos. - phi 0.8 Speed: 1,500 rpm Switchgear: Version: Automatic start Tank: Design: Base frame tank with drip tray Dimensions of the unit: Width approx. mm: 1.200 Height approx. mm: 2.200 Length approx. mm: 3.600 Weight approx. KG: 3.550 Use: Condition: Demonstration machine Year of construction: 2023 Delivery time: immediatel ...

AGG 600_SSK0 Achievement: PRP: 600.0 kVA / 480.0 kW / 866 A ESP: 660.0 kVA / 528.0 kW 50 Hz 400 volts Disposals: Terminal strip 3-pole, neutral conductor, grounding. Engine: Scania DC16 093A 02-54 Power: 545.0 kW Cylinders: 8 Cooling water capacity: 68.0 l Oil volume: 48.0 l incl. starter battery 24 volts Generator: Nidec TAL Series 600 kVA 1 Bearing Synchronous generator with AVR voltage regulation, directly with Steel disc clutch flanged to engine. Construction: NEA in soundproof hood with 990 l base frame tank. Control: Comap InteliLite AMF25 automatic emergency power incl. battery charger and cooling water heater, for automatic start in the event of a power failure (without power switching, not synchronizable), with shutdown in case of overtemperature and lack of oil pressure. Digital display of voltage, frequency, operating hours, 3x phase curren ...

Currently in stock! AGG 300_SSK0 Achievement: PRP: 300.0 kVA / 240.0 kW / 433.0 A ESP: 330.0 kVA / 264.0 kW 50 Hz 400 volts Disposals: Terminal strip 3 poles, neutral conductor, grounding. Engine: Scania DC 09 072A 02-13 Power: 261.0 kW Cylinders: 5 Cooling water capacity: 37.0 l Oil volume: 36.0 l incl. starter battery Generator: Nidec TAL series 300 kVA 1-bearing Synchronous generator with AVR voltage regulation, directly with Steel disc clutch flanged to engine. Construction: NEA in soundproof hood with 990 l base frame tank. Control: Comap InteliLite AMF25 automatic emergency power incl. battery charger and cooling water heater, for automatic start in the event of a power failure (without power switching, not synchronizable), with shutdown in case of overtemperature and lack of oil pressure. Digital display of voltage, frequency, operating hour ...

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Volvo Engine: TAD 731 GE Engine No.: 5312990071 Power: 153 KW Cooling: Water-cooled Occasion: Electric 12 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Leroy Somer Generator type: TAL 044 J Gene. No.: 39796800001 Generator power: 150 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Parallel operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 990 Dimensions of the power unit: Width approx. mm: 1.200 Height approx. mm: 2.295 Length ap ...

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Deutz AG Engine: BF 4 M 2011 C Engine No.: on request Power: 53 KW Cooling: Oil-cooled Occasion: Electric 12 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Leroy Somer Generator type: TAL 042 H Gene. No.: on request Generator power: 60 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Manual & remote start Switch: Generator switch 4 poles Tank: Execution: Base frame tank with drip pan Content / liter: 85 Dimensions of the power unit: Width approx. mm: 1.150 Height approx. mm: 1.647 Length approx. mm: 2.540 ...

Middle-cut device Belt delivery Three knife trimmer Stitching unit Quality Control (MM ASIR !) Feeder (6x TAL 350) Cover feeder (UFA 350)

Cooling: Water Speed: 1500 1/min Battery voltage: 24V Tank: approx. 800 litres Generator: Leroy Somer TAL-A44J Voltage: 400/231 V, 50 Hz Manual/automatic control with DEEP SEA DSE7320 and generator circuit breaker, socket distribution. The generator is equipped with sockets, the total power is removable via a terminal strip. Device is primarily intended for export. New device, unused Warranty: 1 year or 1000 hours of operation, whichever comes first. Immediately available! Subject to prior sale - errors possible! Ref. No.: E-1004-62

Granulation line consisting of: a system of gravimetric mixers TGP-5 for 4 components with pneumatic loaders of the TAL -920G brand 2018, with a capacity of 2x700 kg / h, an extruder Battenfeld BEX 2-107 / 22 with a receiving hopper, power -75 kW, productivity-600 kg / h; hot water ring cutting device, cyclone GXC2660 and storage hopper.

Used and new sea containers are constantly available in stock ! As a storage container or for transport use (with CSC approval). TECHNICAL DATA Various versions in length 20ft (6m) and 40ft (12m) - Standard (height 2.60m) - High Cube (height 2.90m) - Open Top (tarpaulin cover) - Flat Rack (open platform) - etc. Also available with valid CSC. Dimensions and weights can be found on our website at: torlach.com/clanek/2010102701-container-guide.html Visit Sightseeing is possible at any time and at short notice. Transport Delivery by truck/rail/ship possible at any time. Questions Further details, photos, descriptions and appointments for the visit can be arranged at: Phone: +49 - (0)8654 / 409399-0 e-mail: info@alps-container.com EXPORT / SHIPPING / MONTAGE We have 20 years of experience in the worldwide export of plants and machines. - 6,500m2 bearing with tr ...

Used and new sea containers are constantly available in stock ! As a storage container or for transport use (with CSC approval). TECHNICAL DATA Various versions in length 20ft (6m) and 40ft (12m) - Standard (height 2.60m) - High Cube (height 2.90m) - Open Top (tarpaulin cover) - Flat Rack (open platform) - etc. Also available with valid CSC. Dimensions and weights can be found on our website at: torlach.com/clanek/2010102701-container-guide.html Visit Sightseeing is possible at any time and at short notice. Transport Delivery by truck/rail/ship possible at any time. Questions Further details, photos, descriptions and appointments for the visit can be arranged at: Phone: +49 - (0)8654 / 77669-0 e-mail: info@alps-container.com EXPORT / SHIPPING / MONTAGE We have 20 years of experience in the worldwide export of plants and machines. - 6,500m2 bearing with tra ...

Trapezoidal sheets - RAN 35/207 for roof and wall from 5,70 / m² (net) Profiled sheeting produced steel profiled sheets to measure! In thickness 0.50 mm (similar to RAL 3009) and a minimum order quantity of 1001,00 m², with us, get special items produced to measure. At a quantity up to 100.00 m² (sheet thickness 0.50 mm) = 6,23 / m² (net). At an additional cost of 2.22 m (net) get m² us also with Antikondensbeschichtung (anti drip coating/nonwoven coating). Prices for corrugated sheets as special items to measure direct from the manufacturer Special items Checkout, payment & pick up/delivery Only our terms and conditions, available at abc.ranrode.com, are based on our offer. We again expressly please indicate that our offer includes no technical editing (auditable statics, laying, color concepts, etc.). Therefore, we advise to statically verify our offer befor ...

Mfc.: KALLFAS Type: Universa 8060/200 Special Buit: 1996 Power: 21 kW, 400 V, 3 ph., 50 Hz, 58 Amps. Automatic L-Bar sealer – pneumatic - continuous heated system Package size: 800 mm wide x 600 mm deep x 100 mm tall (31-7/16 x 23-1/2 x 3-7/8) Admission height dealer frame: approx. 200 mm Packaged product length max.: approx. 750 mm Transportation product width entry/exit: 500 / 560 mm Speed control by infinitely variable inverter Foil: Center folded film – printed or neutral – up to 60 microns Foil roll dia.: max. 400 mm Foil width: 800 mm Foil overlapping: min. approx. 50 mm max. approx. 100 mm Working height adjustable: 850 – 915 mm Capacity: 30 cycles / min.

Important and distinguishing design features of the RaptorX SL steel base machine / gantry RaptorX-SL1200/S20 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method t ...

Important and distinguishing design features of the RaptorX SL steel base gantry machine RaptorX-SL1200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large ...

Important and distinguishing design features of the RaptorX SL steel base machine RaptorX-SL3200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large 3D objec ...

Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine in the High-Z series. With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the High-Z CNC unit, they acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable guid ...

Specifications / Technical Data S-1000 CNC-Router and CNC-Engraver This is the biggest machine of our High-Z cnc-router series. With external dimensions of approx. 1350x800mm it is still very handy. With the High-Z 3D-cnc-routers you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc-machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc-milli ...