swep tranter used for sale

2 units Wartsila gas engines Model W16V34SG Make Wartsila, Finland Installation date G3 - 31/03/2011 & G4 - 26/03/2011 Rated output (kW) 6375 Rated speed (RPM) 750 Number of cylinder 16 Nos. Swept volume via cylinder(dm3) 36.3 Compression ratio 12:01 Mean effective pressure (bar) 19.8 Mean piston speed (m/sec.) 10 Cylinder bore X stroke (mm) 340 X 400 Cycle stroke four stroke Starting system compressed air (30 kg/cm2) Supercharging system exhaust gas turbocharger Lubrication forced lubrication (engine driven pump) Fuel natural gas Configuration V type Generator make AVK Generator nominal output (kVA) 7968 Voltage (kV) 6.6 Frequency (Hz) 50 Power factor 0.8 Operating hours 13,500 each since installation in 2011.

100,000 litres of fire-fighting water tank - water tank - underground tank for underground storage, outside with bituminous insulation - needed - the container is emptied, cleaned and was factory-provided by us with a bitumen exterior painting Tank capacity: 100,000 litres / 100 m³ Length: approximately 15,750 mm Diameter: approx. 2,900 mm Weight approx. 11,600 kg Material: Material steel S 235 JRG 2 is a low-cost delivery with own trucks. Simply tell us the place of delivery, will receive the exact freight costs immediately. A tour is at any time possible by appointment only. If you need any more information, just give us a call or send us an email to info@barth-tank.de. Trade-in and purchase of tanks/containers is possible to do this, just talk it over us. As the European market leader, we maintain a large stock of over 3,000 above-ground and underground storage  ...

Plastic Box Bito RK3109 Used goods, see pictures Type designation RK3109 Basic dimensions L x W 300 x 117mm Height 90mm Color dove blue Internal dimensions L x W x H 260 x 94 x 80 mm Volume 2 l Load 6 kg Temperature resistance -20°C to +80°C Negotiation price: € 2,-- net per piece ex stock approx. 7500 pieces available, larger quantities on request. Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 lfm pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for or offering numerous articles from a wide variety of areas swept-clean company cle ...

100,000 litre rain water tank - rainwater cistern, underground tank for underground storage, outside with bituminous insulation - used - The container is emptied, cleaned and was factory-provided by us with a bitumen exterior painting Tank capacity: 100,000 litres / 100 m³ Length: approx. 15,750 mm Diameter: approx. 2,900 mm Weight approx. 11,600 kg Material: steel S 235 JRG 2 Delivery with our own trucks. Simply tell us the place of delivery, you will receive the exact freight costs immediately. You can visit us at every time, just let us know and we will find a suitable date! If you need any more information, just give us a call or send us an email to info@barth-tank.de. We also buy your tanks which are not needed anymore and we also accept your used tanks as a trade-in. As the European market leader, we maintain a large stock of over 3,000 above-ground and ...

Industrial Container Box 650 liters New goods, large crates, stacking containers, large containers, see pictures L 120 x W 100 x H 78 cm 650 liters volume Net weight 43 kg Colour grey Up to 4000 kg load capacity in stack (at 5° room temperature) 2 runners, also suitable for shelf storage Also closed version available. Liquid-tight, drain valve possible 200 pcs available Negotiation price: € 145,-- net per piece ex stock Larger quantities on request! Goods are in stock. Transport available on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 lfm pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly lo ...

KRAUSS MAFFEI KM 110-520 C1 warehouse no.: 503020 manufacturer: KRAUSS MAFFEI type: KM 110-520 C1 controller: MC4 year of construction: 2003 technical data clamping unit clamping force: 1100 kN distance between tie bars h:: 470 mm distance between tie bars v:: 470 mm size of mould plates h: 745 mm size of mould plates v: 770 mm min. mould height: 300 mm max. open daylight: 900 mm opening stroke: 600 mm ejector stroke: 150 mm ejector force: 22 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm weight of mould: 1485 kg technical data injection unit screw diameter: 40 mm swept volume: 217 ccm injection pressure: 2377 bar screw length: 23 l/d screw speed: 307 min plasticising rate: 22 g/s PS injection rate into the open: 126 g/s PS number of heating zones: 5 measures & weight measures of machine lxbxh: 4.4m x 1.5 ...

Approx. 500 pcs. gratings 950 x 950 mm Used goods very good condition, see pictures Support bar height 30 mm Load bar thickness 2 mm Mesh size 3 x 3 cm Galvanized Negotiation price: € 29,-- net per piece ex stock Numerous gratings with different mesh sizes and support rods available! Goods are in stock. Transport available on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 lfm pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for or offering numerous articles from a wide variety of areas swept-clean company clearances Operational resolutions Fast- flexible - quick-witted! We also cl ...

1500 m² mezzanine Schäfer R3000 3-storey Used goods, top condition, as good as new, see pictures Ground floor mezzanine steel construction, above 2 floor shelf system Schäfer Manufacturer SCHÄFER R3000 CAD planning and assembly 3-storey Partial sale possible Negotiation price: on request! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 lfm pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for or offering numerous articles from a wide variety of areas swept-clean company clearances Operational resolutions Fast- flexible - quick ...

4,000 m² Nedcon mezzanine Column grid 800 cm x 600 cm! Used goods, top condition, as good as new, see pictures Height of the upper edge of the stage 370 cm Load 500 kg/m² Flooring different finishes available. Cargo lifts, stairs, railings and accessories sufficiently available CAD planning and assembly possible Partial sale possible Negotiation price: on request! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 lfm pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for or offering numerous articles from a wide variety of areas swept-c ...

1,500 m² Nedcon mezzanine Column grid 800 cm x 600 cm! Used goods, top condition, as good as new, see pictures Height of the upper edge of the stage 370 cm Load 500 kg/m² Flooring different finishes available. Cargo lifts, stairs, railings and accessories sufficiently available CAD planning and assembly possible Partial sale possible Negotiation price: on request! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 lfm pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for or offering numerous articles from a wide variety of areas swept-c ...

800 St. Jungheinrich MPB beam 2.7 m Used goods, good condition, see pictures Jungheinrich MPB Carrier Length 2.7 m 2800 kg load/compartment with evenly distributed load Negotiation price: € 25,-- net per pc ex stock Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 lfm pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for or offering numerous articles from a wide variety of areas swept-clean company clearances Operational resolutions Fast- flexible - quick-witted! We also clear and dispose of or dispose of liquidators. Write us with s ...

screw size:30 mm injection shot weight in Polysterol:100 g clamping force:600 kN screw size:30 mm max. swept volumne:106 cm³ injection shot weight in Polysterol:100 g/PS injection pressure:2.750 bar closing pressure:60 t tie bar distance:370 x 370 mm mould hight - min.:160 mm opening stroke:350 mm microprocessor control:NC4 screen text:deutsch Manual:deutsch robot interface:Euromap 12 core pull:1 x without hopper / without water distributor:-/- pump drive power:5,5 kW total connection power:45,0 kW total weight:5.000 kg :4,6 x 1,5 x 2,0 m Electric dosing: 15 kW Electric clamping: 9,8 kW Payment: 100% prior to delivery

screw size:70 mm clamping force:3.500 - 5.000 kN screw size:70 mm max. swept volumne:1.155 cm³ injection pressure:1.480/1.780 bar Injection unit complete with hydraulic block and valves (available twice). The injection units were installed on an ES900WP combi! Payment terms: 100% prior to delivery

100 lfm shelf shelf Schäfer type R7000 Used goods, good condition, see pictures Height 5.7 m Depth 50 cm Load/compartment 200 kg Field width approx. 99.8 cm Negotiation price: € 17.890,-- net ex stock Offer consists of: + 101 stand or frame, 5.7 m galvanized + 700 shelves, 200 kg load/ compartment, galvanized 7 levels per field (of course several are possible for an extra charge) Different heights up to 12 m available. Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 lfm pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for or offering  ...

70 lfm shelf shelf Schäfer type R7000 Used goods, good condition, see pictures Height 3 m Depth 50 cm Load/compartment 200 kg Field width approx. 99.8 cm Negotiation price: € 9.490,-- net ex stock Offer consists of: + 71 stands or frame, 3 m galvanized +350 shelves, 200 kg load/ compartment, galvanized 5 levels per field (of course several are possible for an extra charge) Different heights up to 12 m available. Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 lfm pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for or offering numerou ...

Approx. 100 pcs. gratings 2247 x 995 mm Used goods, very good condition, see pictures Length 2247 mm Width 995 mm Support bar height 20 mm Load bar thickness 6 mm Mesh size 3 x 3 cm Galvanized Negotiation price: € 69,-- net per piece ex stock Numerous gratings with different mesh sizes and support rods available! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 lfm pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for or offering numerous articles from a wide variety of areas swept-clean company clearances Operational resolutions  ...

Key data: 2000

warehouse no.: 503128 manufacturer: ARBURG type: Allrounder 520 C 2000-800 controller: Selogica year of construction: 2005 clamping force: 2000 kN distance between tie bars h x v: 520 x 520 mm size of mould plates h x v: 728 x 728 mm min. mould height: 250 mm max. open daylight: 900 mm opening stroke: 650 mm screw diameter: 50 mm swept volume: 392 ccm injection pressure: 2000 bar equipment included: screen text german core pulling hydraulically 1x core pulling pneum. 1x air valve 1x machine incl. water flow regulator machine without material hopper Anti vibration mounts interface for handling mould heating 12x measures of machine lxbxh: 5.45m x 1.8m x 2.1m total weight: 7150KG

Denios steel drip pan 200 liters Can be driven under with grate Used goods, good condition, see pictures Particularly compact, space-saving design Welded steel construction - safe & durable Corrosion protection through high-quality powder coating in gentian blue (RAL 5010) With optimized foot construction for internal transport Removable hot-dip galvanized gratings as adjusting plane SPECIFICATIONS Collection volume (l) 205 Storage capacity barrels of 200 litres each: 2 Grating galvanized Version can be driven under Material steel Outer width (mm) 1236 Deep outside (mm) 815 Height outside (mm) 355 Surface powder-coated Color blue Total payload (kg) 800 Weight (kg) 64 50 pieces available Negotiation price: € 250,-- net per pcs ex stock Larger quantities on request! Goods are in stock. Transport and assembly possible on request. Viewing possible a ...

warehouse no.: 503243 manufacturer: KRAUSS MAFFEI type: KM 250-1400 CX controller: MC5 year of construction: 2010 operation hours: 54872 h clamping force: 2500 kN distance between tie bars h x v: 630 x 630 mm size of mould plates h x v: 995 x 1050 mm min. mould height: 330 mm max. open daylight: 1150 mm screw diameter: 55 mm swept volume: 570 ccm injection pressure: 2387 bar measures of machine lxbxh: 6.1m x 2.2m x 2.3m total weight: 15000KG equipment included: screen text german CEE-socket 16A pressure accumulator for uprated injection speed Anti vibration mounts interface EUROMAP 67 wear-resistant injection unit

warehouse no.: 503244 manufacturer: KRAUSS MAFFEI type: KM 200-1000 CX controller: MC5 year of construction: 2010 operation hours: 47472 h clamping force: 2000 kN distance between tie bars h x v : 560 x 560 mm size of mould plates h x v: 915 x 915 mm min. mould height: 350 mm max. open daylight: 1050 mm opening stroke: 700 mm screw diameter: 55 mm swept volume: 523 ccm injection pressure: 1904 bar measures of machine lxbxh: 5.5m x 2m x 2.3m total weight: 11500KG equipment included: screen text german CEE-socket 16A Machine without Handling machine without material hopper Anti vibration mounts interface EUROMAP 67 wear-resistant injection unit

Key data: 4000 , 75

warehouse no.: 503220 manufacturer: BATTENFELD type: TM 400-3400 UNILOG B6S year of construction: 2008 clamping force: 4000 kN distance between tie bars h x h: 710 x 710 mm size of mould plates h x v: 1010 x 1010 mm Iem7p9r min. mould height: 300 mm max. mould height: 710 mm max. open daylight: 1380 mm opening stroke: 670 mm screw diameter: 75 mm swept volume: 1657 ccm injection pressure: 2022 bar equipment included: Screentext Multi-Language CEE-socket 16A core pulling hydraulically 1x air valve 1x Anti vibration mounts interface EUROMAP 67 Schuko-socket 16A measures of machine lxbxh: 7.2m x 1.75m x 2.42m total weight: 16400KG

Warehouse No.: 503240 manufacturer: ENGEL type: Victory 650-120 Tech EC200 A02 Year of Construction: 2008 Operation hours: 60000 h clamping force: 1200 kN Size of mould plates H x V: 740 x 680 mm Min. mould height: 300 mm Open Daylight: 800 mm Opening stroke: 500 mm Screw diameter: 45 mm SWEPT Volume: 318 cc Injection pressure: 1232 bar Equipment included: screen text english CEE-socket 16A Core Pulling Hydraulically 2x Air Valve 1x machine incl. water flow regulator machine without material hopper Anti vibration mounts interface EUROMAP 67 Mould Heating 8x measures of machine LXWXH: 4.86m x 1.5m x 2.1m total weight: 7600KG

Key data: 3500 , 60

warehouse no.: 503071 manufacturer: DEMAG type: Concept 350-710-1450 controller: NC4 year of construction: 2003 operation hours: 62370 h clamping force: 3500 kN distance between tie-bars h x v: 710 x 630 mm size of mould plates h x v: 1040 x 950 mm min. mould height: 330 mm max. mould height: 830 mm max. open daylight: 1385 mm opening stroke: 675 mm screw diameter: 60 mm swept volume: 763 ccm injection pressure: 1905 bar equipment included: 16x control for hotrunner screen text german CEE-socket 16A core pulling hydraulically 1x air valve moveable WAP machine incl. water flow regulator machine without material hopper Anti vibration mounts electric interface for handling units according to Euromap 12 interface EUROMAP 63 Schuko-socket 10A measures of machine l x w x h: 6.5m x 2m x 2.3m total weight: 15300KG

Sell an Adol Aldinger combi machine consisting of sliding table saw, side milling machine and slotted hole drilling machine.Footprint with unfolded table and stop extensions, width 2m; Depth 2.7m, height table top 1m The saw comes with a side, longitudinal stop and an angle ruler. The cross stop is about 1.5m, with the screwed-on extension. The max saw blade through, esser is about 400mm The shaft for the saw blade has a diameter of 30mm. The sliding carriage can be swept off and has a movement of 1.5m. The whole carriage can be moved in the slotted holes about 40cm. The height of the saw blade can be adjusted by means of a hand crank. The table can be tilted continuously by 45° by means of a crank. The side milling machine is equipped with 2 Spindl shafts. Diameter 30mm Length about 180mm and 140mm. The height of the slotted hole drilling agreggat can be adjusted. The table ...

Key data: 1600 , 55

warehouse no.: 503156 manufacturer: KRAUSS MAFFEI type: KM 160-1000 PX controller: MC6 year of construction: 2018 operation hours: 9585 h clamping force: 1600 kN distance between tie bars h:: 520 mm distance between tie bars v:: 470 mm size of mould plates h: 710 mm size of mould plates v: 660 mm min. mould height: 200 mm max. mould height: 500 mm opening stroke: 950 mm screw diameter: 55 mm swept volume: 523 ccm injection pressure: 1904 bar equipment included screen text german pressure accumulator for uprated injection speed 3 freely programmable each inputs and outputs air valve 2x machine incl. water flow regulator Anti vibration mounts interface EUROMAP 67 interface for temperature control units interface USB wear-resistant injection unit mould heating 24x measures of machine lxbxh: 6.7m x 1.6m x 2.3m total weight: 10900KG ...

warehouse no.: 502917 manufacturer: BATTENFELD type: BA 2700-1000+250V BK controller: UNILOG B4 year of construction: 2001 operation hours: 87827 h lamping force: 2700 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 900 x 1000 mm min. mould height: 250 mm max. mould height: 620 mm max. open daylight: 1270 mm opening stroke: 550 mm 1st horizontal injection unit: screw diameter: 55 mm swept volume: 522 ccm injection pressure: 1943 bar 2nd verticale injection unit: screw diameter:35mm swept volume: 134,7 cm³ injection pressure:1856 bar equipment included screen text german CEE-socket 16A core pulling hydraulically 4x machine without material hopper Anti vibration mounts interface for hopper loader Schuko-socket 16A Injection moulding machine for two components 250er verticale injection unit screw diameter:35mm swept ...

Used York YLCS1110HA 50Y A water cooled chiller on R134A. Complete with 2 York N-A-J semi-hermetic screw compressors, York shell and tube condenser, York shell and tube as evaporator, 2 SWEP V80Hx56/1P-SC-S braced heat exchangers, liquid line filters, pressure gauges, control cabinet with a York display. Specifications Brand: York Type: YLCS1110HA 50Y A Product type: Water Cooled Chiller Capacity kW: 897,0 Capacity Tons: 255,1 Refrigerant: Freon Refrigerant Type: R134A Weight in kg: Operating weight: 6610 kg / Shipping weight: 6000 kg Sizes: 4100x1600x2200 mm (LxwxH) Compressor(s) type & model: 2 York N-A-J Display: York chiller display Number of fans 0 Remarks |: Y.o.b. 2005 Remarks ||: Capacity based on a evaporating temperature of 6/12°C and a condensing temperature of 40/45°C.

warehouse no.: 503252 manufacturer: KRAUSS MAFFEI type: KM 50-180 CX controller: MC5 year of construction: 2006 Machine is from a cleanroom production. clamping force: 500 kN distance between tie bars h x v: 370 x 370 mm size of mould plates h x v: 600 x 600 mm min. mould height: 200 mm max. open daylight: 400 mm opening stroke: 600 mm screw diameter: 30 mm swept volume: 85 ccm injection pressure: 2025 bar equipment included: screen text german core pulling hydraulically 1x cascade control pneumatically 1 x air valve 2x machine without material hopper machine without water flow regulator Anti vibration mounts interface EUROMAP 67 interface for temperature control units measures of machine lxbxh: 3.5m x 1.4m x 2m total weight: 3000KG

warehouse no.: 503174 manufacturer: DEMAG type: ERGOtech 1000-420-310 controller: NC 4 year of construction: 2002 clamping force: 1000 kN distance between tie-bars h x v: 420 x 420 mm size of mould plates h x v: 600 x 600 mm min. mould height: 250 mm max. open daylight: 750 mm opening stroke: 500 mm screw diameter: 35 mm swept volume: 168 ccm injection pressure: 2020 bar equipment included screen text german CEE-socket 16A complact flash drive core pulling hydraulically 1x air valve 1x machine incl. Handling machine incl. water flow regulator machine without material hopper Anti vibration mounts electric interface for handling units according to Euromap 12 Schuko-socket 10A Schuko-socket 10A measures of machine l x w x h: 4.2m x 1.4m x 1.8m total weight: 3700KG technical data robot-system handling type: Linear manufacture: Wittmann controller: W7 ...

Key data: 2000 , 55

warehouse no.: 503272 manufacturer: ENGEL type: VICTORY 1050-200 Power controller: EC100 A03 year of construction: 2004 clamping force: 2000 kN size of mould plates h x v: 860 x 830 mm min. mould height: 300 mm max. open daylight: 1050 mm opening stroke: 750 mm screw diameter: 55 mm swept volume: 511 ccm injection pressure: 1622 bar measures of machine lxbxh: 6.6m x 1.8m x 2.3m total weight: 12900KG equipment included screen text slovenian core pulling hydraulically 1x core pulling pneum. 1x air valve 1x machine incl. water flow regulator machine without material hopper machine without hopper loader Anti vibration mounts interface for ejector plates safety interface for dosing unit

warehouse no.: 503292 manufacturer: ARBURG type: Allrounder 470 C 1500-350 Selogica year of construction: 2003 operation hours: 48000 h clamping force: 1500 kN distance between tie bars h x v: 470 x 470 mm size of mould plates h x v: 650 x 650 mm min. mould height: 250 mm max. open daylight: 750 mm opening stroke: 500 mm screw diameter: 40 mm swept volume: 182 ccm injection pressure: 2050 bar measures of machine lxbxh: 4.68m x 1.3m x 2.18m total weight: 4410KG equipment included screen text german core pulling hydraulically 2x machine without material hopper Anti vibration mounts mould heating 6x

warehouse no.: 503294 manufacturer: ARBURG type: Allrounder 470 C 1500-350 Selogica year of construction: 2003 operation hours: 47000 h clamping force: 1500 kN distance between tie bars hxv: 470x470 mm size of mould plates hxv: 650x650 mm min. mould height: 250 mm max. open daylight: 750 mm opening stroke: 500 mm screw diameter: 40 mm swept volume: 182 ccm injection pressure: 2050 bar equipment included: screen text german machine without material hopper Anti vibration mounts measures of machine lxbxh: 4.68m x 1.3m x 2.18m total weight: 4410KG

warehouse no.: 503293 manufacturer: ARBURG type: Allrounder 470 C 1500-350 controller: Selogica year of construction: 2003 operation hours: 53000 h clamping force: 1500 kN distance between tie bars h x v: 470 x 470 mm size of mould plates h x v: 650 x 650 mm min. mould height: 250 mm max. open daylight: 750 mm opening stroke: 500 mm screw diameter: 40 mm swept volume: 182 ccm injection pressure: 2050 bar equipment included: screen text german core pulling hydraulically 2x machine without material hopper Anti vibration mounts mould heating 6x measures of machine lxbxh: 4.68m x 1.3m x 2.18m total weight: 4410KG

Key data: 1500

warehouse no.: 503391 manufacturer: ARBURG type: Allrounder 470 C 1500-400 controller: Selogica year of construction: 2008 operation hours: 13847 h clamping force: 1500 kN distance between tie bars h x v: 470 x 470 mm size of mould plates h x v: 650 x 650 mm min. mould height: 250 mm max. open daylight: 750 mm opening stroke: 500 mm screw diameter: 40 mm swept volume: 201 ccm injection pressure: 2000 bar equipment included: screen text german CEE-socket 16A CEE-socket 16A core pulling hydraulically 2x air valve 1x machine incl. belt conveyor machine incl. hopper loader machine incl. Handling machine incl. safety fencing machine incl. water flow regulator Anti vibration mounts interface EUROMAP 67 Schuko-socket 10A Schuko-socket 10A technical data robot-system handling type: Linear manufacture: Wittmann controller: W ...

Key data: 3000 , 60

warehouse no.: 503393 manufacturer: KRAUSS MAFFEI type: KM 300-1400 CX year of construction: 2011 operation hours: 78454 h clamping force: 3000 kN distance between tie bars h x v: 630 x 630 mm size of mould plates h x v: 995 x 1050 mm min. mould height: 330 mm max. open daylight: 1150 mm opening stroke: 820 mm screw diameter: 60 mm swept volume: 678 ccm injection pressure: 2007 bar equipment included: screen text german CEE-socket 16A pressure accumulator for uprated injection speed Handling without safety fencing core pulling hydraulically 2x machine incl. Handling machine without material hopper Anti vibration mounts interface EUROMAP 67 interface for handling Schuko-socket 10A technical data robot-system handling type: Linear manufacture: Wittmann controller: W 833 year of construction: 2011 handling weight: 10 kg X axis:  ...

Key data: 2500 , 60

warehouse no.: 503407 manufacturer: ARBURG type: Allrounder 630 H 2500-1300 controller: Selogica direct year of construction: 2019 operation hours: 5186 h clamping force: 2500 kN distance between tie bars h x v: 630 x 630 mm size of mould plates h x v: 900 mm min. mould height: 400 mm max. mould height: 950 mm max. open daylight: 1500 mm opening stroke: 550 mm screw diameter: 60 mm swept volume: 678 ccm injection pressure: 2000 bar equipment included: screen text german core pulling hydraulically 1x machine incl. belt conveyor machine incl. Handling machine incl. safety fencing technical data robot-system handling type: Linear manufacture: ARBURG controller: MULTILIFT V year of construction: 2019 Z axis: 2000 mm measures of machine lxbxh: 7.2m x 2.1m x 2.2m total weight: 14000KG

Key data: 350 kN, 28 mm

warehouse no.: 503268 manufacturer: Dr. Boy type: Boy 35A controller: Procan year of construction: 2008 operation hours: 56508 clamping force: 350 kN distance between tie-bars h x v: 280 x 254 mm size of mould plates h x v: 425 x 400 mm min. mould height: 200 mm max. open daylight: 500 mm opening stroke: 300 mm screw diameter: 28 mm swept volume: 58.5 ccm injection pressure: 1577 bar equipment included: screen text german core pulling hydraulically 1x machine without material hopper Anti vibration mounts electric interface for handling units according to Euromap 12 measures of machine l x w x h: 2.39m x 0.88m x 1.918m total weight: 1600KG

Key data: 350 kN, 18 mm

warehouse no.: 503175 manufacturer: DEMAG type: Extra 35-80 controller: NC4 year of construction: 2004 clamping force: 350 kN distance between tie-bars h x v: 280 x 280 mm size of mould plates h x v: 460 x 450 mm min. mould height: 105 mm max. open daylight: 455 mm opening stroke: 350 mm screw diameter: 18 mm swept volume: 23 ccm injection pressure: 2868 bar equipment included: screen text german CEE-socket 16A machine with material hopper machine incl. water flow regulator Anti vibration mounts Schuko-socket 10A measures of machine l x w x h: 3.3m x 1.2m x 2m total weight: 2620KG

Key data: 550 kN, 32 mm

warehouse no.: 503271 manufacturer: Dr. Boy type: Boy 55 A controller: Procan year of construction: 2003 clamping force: 550 kN distance between tie bars h:: 360 mm distance between tie bars v:: 335 mm size of mould plates h: 530 mm size of mould plates v: 500 mm min. mould height: 250 mm max. open daylight: 500 mm opening stroke: 350 mm screw diameter: 32 mm swept volume: 76.5 ccm injection pressure: 1030 bar measures of machine lxbxh: 3.25m x 1.09m x 2.04m total weight: 2250KG equipment included screen text german core pulling hydraulically 1x Anti vibration mounts

Key data: 800 kN, 35 mm

warehouse no.: 503232 manufacturer: KRAUSS MAFFEI type: KM 80-380 EX controller: MC5 year of construction: 2008 operation hours: 49673 h clamping force: 800 kN distance between tie-bars h x v: 520 x 420 mm size of mould plates h x v: 640 x 740 mm min. mould height: 300 mm max. open daylight: 790 mm screw diameter: 35 mm swept volume: 154 ccm injection pressure: 2429 bar equipment included: screen text german CEE-socket 16A air valve 1x machine with material hopper machine incl. water flow regulator Anti vibration mounts interface EUROMAP 67 interface USB Schuko-socket 10A mould heating 24x measures of machine l x w x h: 5.35m x 1.7m x 2m total weight: 6500KG

Key data: 800 kN, 45 mm

warehouse no.: 503399 manufacturer: ARBURG type: Allrounder 370 S 800-350 controller: SELOGICA year of construction: 2004 operation hours: 33700 h clamping force: 800 kN distance between tie-bars h x v: 370 x 370 mm size of mould plates h x v: 570 x 570 mm min. mould height: 250 mm max. open daylight: 700 mm opening stroke: 450 mm screw diameter: 45 mm swept volume: 230 ccm injection pressure: 1670 bar equipment included screen text german CEE-socket 16A core pulling hydraulically 1x machine with material hopper machine incl. water flow regulator Anti vibration mounts Schuko-socket 10A vario injection unit mould heating 2x measures of machine l x w x h: 4m x 1.4m x 2.1m total weight: 3800KG

Key data: 1000 kN, 35 mm

warehouse no.: 503181 manufacturer: ARBURG type: Allrounder 470 E 1000-290 controller: Selogica year of construction: 2012 operation hours: 47142 h clamping force: 1000 kN distance between tie bars h:: 470 mm distance between tie bars v:: 470 mm size of mould plates h: 637 mm size of mould plates v: 637 mm min. mould height: 250 mm max. mould height: 500 mm max. open daylight: 850 mm opening stroke: 350 mm screw diameter: 35 mm swept volume: 144 ccm injection pressure: 2000 bar measures of machine lxbxh: 4.4m x 1.62m x 2m total weight: 5280KG equipment included: screen text german CEE-socket 16A air valve 1x machine incl. water flow regulator machine incl. water flow regulator machine without material hopper Anti vibration mounts interface for ejector plates safety interface for dosing unit interface USB Schuko-socket 10A m ...

Key data: 1000 kN, 40 mm

warehouse no.: 503248 manufacturer: ENGEL type: e-motion 440-100 controller: CC200 year of construction: 2017 clamping force: 1000 kN size of mould plates h: 740 mm size of mould plates v: 700 mm min. mould height: 450 mm max. mould height: 720 mm max. open daylight: 1150 mm opening stroke: 430 mm screw diameter: 40 mm swept volume: 220 ccm injection pressure: 1930 bar measures of machine lxbxh: 5.3m x 1.6m x 2.2m total weight: 10000KG equipment included: screen text german Anti vibration mounts

Key data: 900 kN, 22 mm

warehouse no.: 503415 manufacturer: ENGEL type: VICTORY 80-90 tech controller: CC200 year of construction: 2009 operation hours: 70171 h clamping force: 900 kN size of mould plates h x v: 740 x 680 mm min. mould height: 300 mm max. open daylight: 800 mm opening stroke: 500 mm screw diameter: 22 mm swept volume: 38 ccm injection pressure: 2060 bar measures of machine l x w x h: 4.4m x 1.5m x 2m total weight: 6700KG equipment included screen text german CEE-socket 16A core pulling hydraulically 1x air valve 2x machine incl. water flow regulator machine without material hopper Anti vibration mounts Schuko-socket 10A mould heating 4x

Key data: 1500 kN, 35 mm

warehouse no.: 503299 manufacturer: ARBURG type: Allrounder 520 S 1500-290 controller: Selogica year of construction: 2018 operation hours: 17400 h clamping force: 1500 kN distance between tie bars h:: 520 mm distance between tie bars v:: 520 mm size of mould plates h: 695 mm size of mould plates v: 695 mm min. mould height: 450 mm max. open daylight: 1025 mm opening stroke: 575 mm screw diameter: 35 mm swept volume: 144 ccm injection pressure: 2000 bar measures of machine lxbxh: 4.42m x 1.61m x 2.2m total weight: 5900KG equipment included: screen text german cascade control unit-interface pneu.6x core pulling hydraulically 2x machine without material hopper mould heating 12x

Key data: 1600 kN, 198 g/PS, 40 mm

warehouse no.: 503413 manufacturer: ARBURG type: 1500T 1600-350 controller: year of construction: 2006 operation hours: 34721 h clamping force: 1600 kN distance between tie-bars h x v: 1500 mm round table diameter: 1500 mm ejector stroke: 150 mm ejector force: 46 kN centering diameter of moving platen: 125 mm centering diameter of fixed platen: 125 mm screw diameter: 40 mm swept volume: 182 ccm injection pressure: 2120 bar equipment included screen text german CEE-socket 16A rotary table Cascade control hydraulically 4x core pulling hydraulically 2x machine with rotary index table machine incl. water flow regulator machine without material hopper Schuko-socket 10A mould heating 12x measures of machine l x w x h: 5.58m x 2.25m x 2.88m total weight: 12600KG

Key data: 1500 kN

warehouse no.: 503061 manufacturer: DEMAG type: Ergotech system 150-610 controller: NC4 year of construction: 2004 operation hours: 63329 h clamping force: 1500 kN distance between tie-bars h x v: 500 x 500 mm size of mould plates h x v: 750 x 750 mm min. mould height: 250 mm max. mould height: 560 mm max. open daylight: 1060 mm opening stroke: 500 mm screw diameter: 45 mm swept volume: 323 ccm injection pressure: 1973 bar equipment included: Ejector parallel to the mould movement screen text german CEE-socket 16A pressure accumulator for uprated injection speed core pulling hydraulically 1x air valve 1x machine with material hopper machine without belt conveyor machine without hopper loader Anti vibration mounts Schuko-socket 10A choice unit measures of machine l x w x h: 5.45m x 1.63m x 2.1m total weight: 7500KG

Key data: 2100 kN, 45 mm

warehouse no.: 502923 manufacturer: BATTENFELD type: TM 2100-750+350V controller: UNILOG B4 year of construction: 2003 clamping force: 2100 kN distance between tie-bars h x v: 570 x 570 mm size of mould plates h x v: 840 x 840 mm min. mould height: 350 mm max. mould height: 700 mm max. open daylight: 1230 mm opening stroke: 530 mm horizontal injection unit: screw diameter: 45 mm swept volume: 358 ccm injection pressure: 2116 bar 2nd vertical injection unit: screw diameter: 35 mm swept volume: 169ccm injection pressure: 2083 bar equipment included: 8x control for hotrunner screen text german CEE-socket 16A core pulling hydraulically 1x core pulling hydraulically 3x air valve 1x machine incl. water flow regulator machine without material hopper needle shut-off-nozzle Anti vibration mounts electric interface for handling units according to Euromap 12  ...

Key data: 2200 kN, 60 mm

warehouse no.: 503302 manufacturer: ARBURG type: Allrounder 570 S 2200-1300 controller: Selogica year of construction: 2009 operation hours: 25044 h clamping force: 2200 kN distance between tie bars h:: 570 mm distance between tie bars v:: 570 mm size of mould plates h: 795 mm size of mould plates v: 795 mm min. mould height: 250 mm max. open daylight: 900 mm opening stroke: 650 mm screw diameter: 60 mm swept volume: 664 ccm injection pressure: 2000 bar equipment included: screen text german core pulling hydraulically 3x machine incl. hopper loader machine incl. Handling machine incl. safety fencing machine without material hopper Anti vibration mounts technical data robot-system handling type: Linearhandling manufacture: Arburg controller: Multilift year of construction: 2009 handling weight: 15 kg X axis: 700 mm Y axis: 1000 mm Z  ...

Key data: 2500 kN, 50 mm

warehouse no.: 503409 manufacturer: ARBURG type: Allrounder 630 S 2500-800 controller: SELOGICA year of construction: 2012 operation hours: 38000 h clamping force: 2500 kN distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 900 x 900 mm min. mould height: 300 mm max. mould height: 700 mm max. open daylight: 900 mm opening stroke: 600 mm screw diameter: 50 mm swept volume: 392 ccm injection pressure: 2000 bar measures of machine l x w x h: 5.8m x 2.85m x 2.21m total weight: 12200KG