sw 3 ha used for sale

Manufacturer: Safan Model: CNCL 110-3100 Type of Machine : Press Brake Find more here - / Contact us at -

Manufacturer: Engel Victory 330/80 Model:Victory 330/80 Year of Manufacture: 2006 Operating hours: 95257 Closing force: 80 t Screw diameter: 40 mm Max. injection volume: 154 cm3 Fixing plate: 670 x 600 mm Machine weight: 5.6 t Find more here - / Contact us at -

Manufacturer: Arburg Model:720S 3200/1300 Year of Manufacture: 2010 Operating hours: 84854 Closing force: 320 t Screw diameter: 60 mm Max. injection volume: 664 cm3 Fixing plate: 1030 x 1030 mm Machine weight: 17.5 t Find more here - / Contact us at -

This 4-axis HELLER MCH 350 was manufactured in 2006, featuring a Siemens 840D PL control system and a robust spindle capable of 7,000 rpm. It includes a HSK 100 tool clamping system and a large magazine with 234 slots. The machine offers a substantial working area of 1250 x 1000 x 1000 mm and a pallet size of 800 x 800 mm. For more information about this machining centre, please reach out to us.

This Hurco VMX 30i was manufactured in 2016. It features a robust table size of 1020x510 mm with a maximum load capacity of 1000 kg. Equipped with a high-speed range up to 12000 rpm and a rapid traverse rate of 35/35/30 m/min in X/Y/Z, it ensures efficient machining. Additional features include a cooling water system, chip conveyor, and protective cabin. Consider the opportunity to buy this Hurco VMX 30i vertical machining centre. Contact us for more information.

This 5-axis OMV Active Five 3000 was manufactured in 2008. It features a fixed table with a tilting head, Heidenhain TNC-530 control, and a travel range of 3000 x 1800 x 850 mm. The spindle operates at 22,000 rpm with a HSK63A taper and a 30-position tool changer. If you are looking to get high-quality milling capabilities, consider the OMV Active Five 3000 machine we have for sale. Contact us for more information.

sheet width: 3050 mm plate thickness: 4 mm weight of the machine ca.: 6.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis Mazak VTC 30C was manufactured in 1998. It features a Mazatrol M Plus control, rapid traverse rates of up to 24,000 mm/min in X, Y, and 20,000 mm/min in Z. The spindle speed reaches 7,000 rpm, supporting a table load of 1200 kg. If you are looking to get high-quality milling capabilities, consider the Mazak VTC 30C machine we have for sale. Contact us for more information.

Weight: 3,5 to. digital: ja milling-head swivable +/-: ja : ja Dimensions (L/W/H): 1700 x 1500 x 1600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis Mazak VTC-300C vertical machining center was manufactured in 2005. It features a spindle speed range of 40 - 12,000 RPM and a robust table capable of handling loads up to 1400 KG. With dimensions allowing for significant movement (X: 1740 mm, Y: 760 mm, Z: 660 mm) and equipped with a 30-piece ATC, this machine is ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the Mazak VTC-300C machine we have for sale. Contact us for more information.

Cam Automatic Baby Diaper, Sanitary Napkin, Dry Wipes, Wet wipes Packing Machine 300 Automatic wet wipes, dry wipes, Sanitary Napkin Packing Machine- 60ppm CAM-300 Automatic Baby Diaper, Wet wipes, Dry wipes, Sanitary Napkin Packing Machine wet wipes dry wipes pads food pads packing line Main Features ☆ Fully servo driven,Servo motor management by electronic CAM ☆ Modular structure design，Small floor area ☆ Force restrict protection, stable running ☆ Suitable for different direction packing Main component configuration ★ Motion control system：MITSUBISHI/SIEMENS ★ pneumatic：SMC ★ Guide rail, screw rod ： TBI 、TMI ★ Electrical accessories：Schneider Parameter Working speed UP to 600 pieces/min and 60 bags/min Number of pieces per row 10-20pieces/row General dimensions (LxWxH) 6295x1000x2277mm Weight 3522KG Electrical Power consum ...

Arburg 320 C 500-170 (2014) Working hours : 44.124 h Clamping force: 50 t Screw diameter : 25 mm Shot weight : 75 g Clamping force: 500 kN Distance between tie bars: 320 × 320 mm Platen size (H × V): 446 × 446 mm Minimum mould height: 200 mm Maximum daylight opening: 550 mm Ejector stroke: 125 mm Screw diameter: 30 mm Maximum shot volume: 85 cm³ Maximum shot weight (PS): 77 g Injection pressure: 2000 bar Screw speed max: 400 r/min Nozzle stroke: 250 mm Nozzle contact pressure: 40.6 kN Heating capacity: 9.4 kW Pump drive power: 11 kW Total installed power: approx. 20.5 kW L 3.4 m x W 1.4 m x H 2.0 m Weight :2 400 kg Injection Unit Thermoplastics injection unit, 25 mm screw, high wear-resistant design Standard screw coupling with flat-ended geometry Open nozzle, 25 mm Nozzle tip for open nozzle Heater band for open nozzle Clamping Unit Mounting platen set, central diameter 125  ...

Max. saw blade diameter: 350 mm Pneumatic material tensioners Table can be rotated left and right Manual feed

This 5-Axis YASDA H-30i horizontal machining center was manufactured in 2001. It features a 650mm X-axis, 560mm Y-axis, and 560mm Z-axis with a spindle speed range of 120-12,000 RPM and a BT 40 Big Plus spindle. Equipped with a 60-position automatic tool changer and cooling through the spindle, this machine is controlled by a Fanuc 16iM system. Buy this YASDA H-30i horizontal machining center for precise and efficient milling operations. Reach out for further details.

This 3-axis Kitamura 3XiF was manufactured in 2005. It features a robust FANUC 16i-MB control system, a spindle speed of 10,000 rpm, and a BT-40 taper. The machine includes a chip conveyor with an extended neck and a 30-tool changer. Table size is 900 x 410 mm, supporting up to 200 kg. Ideal for precision machining with internal spindle cooling available. Contact us for more information about this machine.

Key data: 800

Groupe électrogène gaz – 800 kW MWM / Caterpillar Energy Solutions – TCG 3016 V16 Groupe de cogénération gaz équipé d’un moteur MWM TCG 3016 V16. Puissance électrique d’environ 800 kW, régime 1500 tr/min – 50 Hz. Environ 13 000 heures de fonctionnement. Groupe complet avec alternateur, armoire électrique 2G, et échangeurs MAHLE. Convient pour cogénération, production d’électricité ou projet énergétique. Disponible immédiatement. Visite possible sur demande.

General SKU386W1190 Makechema No.35391 Year of construction2010 LocationBarneveld Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket3 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume4000 Ltr. Motor0.75 KW Vacuumcheck Specified Features - Stainless Steel Reactor Reactorcheck Capacity4000 l (4500 l) Vessel sizes1600 x 2500 mm Dished bottomcheck Dished top sidecheck Manholecheck (500 mm) Top connectionscheck With jacketcheck Max. temperature-10/ 100 °C With turbo stirrercheck Motor0.75 kW, 400 V, 1330 rpm Speed mixing shaft130 rpm Stainless Steel Reactors MaterialStainless steel 1.4301 (304) Information Floorspace2.5 x 2.5 m Total height3.5 m Weight2200 kg ATEX compatiblecheckStainless Steel ReactorsChemaReactors > Stainless Steel ReactorsBrand > Chema What you can expect from Foeth: -- Machine is in w ...

pressure: 220 t chamfer lenght: 3200 mm distance between columns: 2700 mm Control: Cybelec CybTouch 12 throat: 400 mm stroke: 220 mm dayligth: 480 mm : 140 mm/s bending speed: 0-10 mm/s : 110 mm/s total power requirement: 18,5 kW dimensions: 3600 x 2000 x 2900 mm weight: 11.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis FAMUP COBO MM 3000 was manufactured in 2002. It features a working area of 3000 × 600 × 600 mm, spindle speed up to 15,000 rpm, and ISO 40 spindle taper. Equipped with a 30-position tool changer, high-pressure through-spindle coolant, a dividing wall for pendular jobs, and a chip conveyor. Consider the opportunity to buy this FAMUP COBO MM 3000 vertical machining centre. Contact us for more information.

pressure: 130 t chamfer lenght: 3200 mm distance between columns: 2700 mm Control: Cybelec CybTouch 12 throat: 400 mm stroke: 200 mm dayligth: 480 mm : 200 mm/s bending speed: 0-10 mm/s : 120 mm/s total power requirement: 7,5 kW dimensions: 3600 x 1800 x 2700 mm weight: 8.200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 5-axis Brother Speedio M 300 X3 vertical machining center was manufactured in 2024. It features a CNC-C00 control unit, with travel dimensions of 300 mm on the X-axis, 440 mm on the Y-axis, and 305 mm on the Z-axis. The machine supports a spindle speed of up to 16,000 min⁻¹ and a rapid traverse rate of 50 m/min. It has a tool storage capacity of 22 tools. Consider the opportunity to buy this Brother Speedio M 300 X3 vertical machining center. Contact us for more information.

table length: 3000 mm table width: 1500 mm table height: 200 mm bore: 28 mm material thickness: ca. 24,5 - 27 mm : 200 mm weight: ca. 1.553 kg Product description: Siegmund Retro Offer: Welding table as it was 25 years ago, additionally with plasma nitriding and current table feet. Welding table: - High-quality steel S355J2+N + plasma nitriding 200 - Holes surface 100x100 mm grid - Corners, edges, and holes 45° chamfered - Holes side panel in diagonal grid - Construction reinforced by ribs - Includes basic foot equipment (working height 850 mm) Accessories: - 6 x professional nitrided screw clamps - 12 x quick-release bolts without groove, double burnished - 8 x universal stop 225 L nitrided - 2 x stop and clamping angle 175 L nitrided - 2 x stop and clamping angle 500 G nitrided - 1 x accessory set - Eccentric stop Ø 60 with M10 thread, nitrided - Allen key size 6 - Brush Ø 30 with ...

Round profile pliers Z50 2.500kg 300-800mm North Griffin Load handling devices NP >2.5000€ like new, not used

2 x Arburg 320 K 700-100 injection moulding machines 2001 and 2003

Operating hours: 70792 h Equipment / Additional information: The compressor is water-cooled and has heat recovery. Rated power: 160.0 kW Motor speed: 1500 rpm Max. operating pressure: 8.5 bar Ambient temperature: 3°C/45°C

General SKU212T481 MakeOchsner TypeCNY 100-340 Mach.No.49065 Main Features MaterialStainless steel Volume32000 Ltr. Motor12.5 KW Specified Features - Centrifugal Pump MaterialStainless steel Centrifugal Pumps Pumpcheck Number of pumps:1 Capacity32 m³/h With motorcheck 11/12,5 kW 380-420/440-480 Volt (ABB: type: MBT 160M) InletDN100 OutletDN65 Information Mounted on framecheck LocationBarneveld Floorspace1,5x0,65 m Total height0,6 m Weight600 kgCentrifugal PumpsOchsnerPumps > Centrifugal PumpsBrand > Ochsner What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This 4-axis Mazak VTC 800/30SR was manufactured in 2012. It features a high-pressure coolant system at 15 bar, a 48-tool magazine, and dual auto tool length measurement units. Equipped with Siemens software, a Visiport, and an RMP60 probe, its ideal for precise vertical machining tasks. If you are looking to get high-quality milling capabilities, consider the Mazak VTC 800/30SR machine we have for sale. Contact us for more information.

This 4-axis Brother TC-32BN QT was manufactured in 2008, featuring a Brother B00 control system, X-axis travel of 550 mm, Y-axis travel of 400 mm, and Z-axis travel of 415 mm. It boasts rapid traverse rates of 70 m/min, a spindle speed up to 20,000 rpm, and a tool magazine with 40 positions. Consider the opportunity to buy this Brother TC-32BN QT vertical machining centre. Contact us for more information about this machine.

This 5-axis Mazak VTC 800/30SR was manufactured in 2014, featuring a robust 155-tool ATC, 15 bar through-spindle coolant, and a KUKA robot for enhanced automation. It includes a technology package for 5-axis milling and a robot interface, making it ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the Mazak VTC 800/30SR machine we have for sale. Contact us for more information about this machine.

This 3-axis Proth PSGS 3060 BH / S1 surface grinding machine was manufactured in 2018. It features a table size of 300 × 600 mm and an electromagnetic chuck of the same dimensions. The grinding wheel measures 355 × 38 × 127 mm. Powered by a 3.7 kW spindle motor, this robust machine weighs approximately 1,900 kg. Consider the opportunity to buy this Proth PSGS 3060 BH / S1 surface grinding machine. Contact us for more information.

This BERG & SCHMID VKS 370 VA was manufactured in 2019. It features a fully automatic hydropneumatic vertical circular saw with CNC frequency conversion. The machine includes a roller conveyor on the feed side (3m) and discharge side (2m), enhancing material handling. Starter Kit 1 with circular saw blades and coolant concentrate is also included. Consider the opportunity to buy this BERG & SCHMID VKS 370 VA Circular Metal Saw. Contact us for more information.

This HILALSAN ULTIMATE CAP-3220 hydraulic press was manufactured in 2021. It features a pressing force of 220 tons, a bending length of 3100 mm, and is equipped with a Delem DA-58 controller. With a stroke length of 265 mm and a throat depth of 410 mm, it offers robust performance for precise operations. Consider the opportunity to buy this HILALSAN ULTIMATE CAP-3220 hydraulic press. Contact us for more information about this machine.

General SKU354T1032 MakeClima Temperatur Systeme TypeC+10/350/S LocationBarneveld CEcheck Pressure Working pressure25 Bar Main Features MaterialStainless steel Volume338 Ltr. Max.temp.90 °C Specified Features - Drying oven Climate boxcheck Temperature Test Chambers Max. temperature90 °C Capacity338 Ltr, (quantity: 0,9 kg) Internal width645 mm Internal depth710 mm Internal height740 mm Steam heatingcheck Electric capacity3,2 kW Number of doors:1 With air circulationcheck With fancheck With trayscheck MaterialStainless steel Information No.007020 Year of construction2000 Floorspace0,85x1,7 m Total height1,9 m Weight400 kg Extra SpecificationsTemp. range: 10-90 °C Humidity range: 10-95%rF Dew point req. 1: 5-89 °C Dew point req. 2: -19-5 °C Drying ovensCTS Clima Temperatur HechingenDryers > Drying ovensBrand > CTS Clima Temperatur Hechingen What you can ...

This RAVNE PRESSES Manzoni 315 stamping machine was manufactured in 1992. It features a robust eccentric H-frame, monoblock design with a press force of 3150 kN and a drive power of 60 kW. It has a fixed stroke of 200 mm and slide dimensions of 2550 x 1250 mm. If you are looking to get high-quality stamping capabilities, consider the RAVNE PRESSES Manzoni 315 machine we have for sale. Contact us for more information.

pulling force - max.: t max. ram stroke: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This SCHMIDT Electric Press 343 was manufactured in 2016. It features a stroke of 100 mm, tool dimensions of 150 x 100 mm, and a maximum speed of 150 mm/s. The press force monitoring and two-hand operation ensure safety and precision. Ideal for tasks requiring up to 2.5 kN pressing force with a maximum of 4 kN. The machine is in very good condition, almost like new. Contact us for more information about this machine.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This LVD Sirius 3015 PLUS was manufactured in 2015. A robust CO2 laser cutting machine, it includes an automatic nozzle changer and has logged 22,192 operating hours. The package comes complete with a laser source, cooler, extraction unit, and various wear parts including nozzles, lenses, and additional lens holders. If you are looking to get high-quality cutting capabilities consider the LVD Sirius 3015 PLUS machine we have for sale. Contact us for more information about this machine.

This MicroStep Fiber MSF 3001.15L was manufactured in 2017. It features a 3m x 1.5m cutting table, 4kW IPG YLS laser source, and a HighYag cutting head for perpendicular cuts only. It includes Donaldson extraction and filtration equipment and automatic layout planning software for flat sheets. Consider the opportunity to buy this MicroStep Fiber MSF 3001.15L fiber laser cutting machine. Contact us for more information.

Inv. Num. : 8935 Type: AX 80-380 Producer: Krauss Maffei Created: 2011 Parameters: Control System: MC5 4.5 Clamping force: 80 t Screw diameter: 30 mm

This Hollinger MSE-II-EP-SB-300-450 was manufactured in 1993. It is part of a comprehensive line that includes various welding and cutting machines, enhancing versatility and productivity in operations. Ideal for those looking to get high-quality welding capabilities, consider the Hollinger MSE-II-EP-SB-300-450 machine we have for sale. Contact us for more information about this machine.

This 3-axis Hypertherm PL-YPE 3100 was manufactured in 2017 and features a Hypertherm® HyPerformance HPR 400XD gas plasma source. It offers precise cutting with a maximum capacity of 50 mm in mild steel, 75 mm in stainless steel, and 45 mm in aluminum. The effective cutting area is 3000 mm by 1200 mm. If you are looking to get high-quality cutting capabilities, consider the Hypertherm PL-YPE 3100 machine we have for sale. Contact us for more information.

Manufacturer: Bystronic Model: BySprint Fiber 3015 Year of Manufacture: 2013 4KW Find more here - / Contact us at -

A complete IGM welding system with robot is available. Robot: IGM RTI 2000, roller stand: IGM RB 300, positioner: IGM RP 300, control system: PLC/KUKA K C2, total system dimensions X/Y/Z: approx. 5250mm/4000mm/2800mm, drive time: 31091h, welding hours: 12930h, waiting time: 99278h, total time: 113051h. Without workpiece fixtures. The 6th axis of the machine can no longer be controlled. Documentation available. An on-site inspection is possible. Expected to be available in May 2026.

This 3-axis Trotec Speedy 360 was manufactured in 2019, featuring a robust CO₂ laser system with a power range of 40-120W. It offers a maximum working area of 32 × 20 inches and supports a variety of materials with its multifunctional table options, including a vacuum table and honeycomb cutting tabletop. Ideal for precise cutting and engraving, this machine includes JobControl® Expert Software for enhanced operation. If you are looking to get high-quality cutting capabilities, consider the Trotec Speedy 360 machine we have for sale. Contact us for further details regarding this machine.

This TRUMPF TRUPUNCH 3000 (S11) was manufactured in 2012. It features a Bosch Rexroth MTX CMP70 control, a maximum sheet format of 2,500 × 1,250 mm, and can handle sheet thicknesses up to 6.4 mm. The punching force reaches 180 kN, with a maximum workpiece weight of 160 kg. It includes a linear magazine with 20 stations and supports various roller tools. Consider the opportunity to buy this TRUMPF TRUPUNCH 3000 (S11) CNC punching machine. Contact us for more information.

This 5-axis NUKON Fiber Laser Extreme 30250 was manufactured in 2021. It features a 12 kW fiber laser, Beckhoff CNC control system, and a maximum sheet size of 2,500 x 12,000 mm. The machine supports speeds up to 50 m/min and includes a servo drive system. Consider the opportunity to buy this NUKON Fiber Laser Extreme 30250 fiber laser cutting machine. Contact us for more information about this machine.

table length: 3000 mm table width: 1500 mm table height: 150 mm bore: 22 mm weight: 1100 kg Equipment: - 4 feet - basic equipment 650 mm - high-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drill holes surface 100x100 mm grid - Corners, edges and drill holes rounded - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise superstructures The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This Intermac primus 322 Waterjet cutting machine was manufactured in the year 2014 in Italy and has 200 working hours. It is equipped with a working table, a pressure system, a PC unit with CAM/CAD drivers, a controller and a silo for technological sand water treating system. It is compatible with DXF, DWG, PDF, CDR, etc. The machine is in very good conditions.

Vahterus PSHE 5SH-320/1/1 Plate Heat Exchanger Never been installed before!