sv 3 maxi used for sale

The Alfa Laval - Ibex MOG 3040 is a self-priming positive displacement rotary lobe pump with sanitary design which can handle low and high viscosity products like dairy products (e.g., yoghurt, quark, curd and butter), foodprocessing, beverage, cosmetics, pharmaceutical and fine chemicals industries. This pump is perfect for managing all kinds of fluid, of either low or high viscosity, as well as for filtering and bottling applications. Products containing fragile solids such as curd can be pumped without damage thanks to the specially designed lobes. Tri-lobe stainless steel lobes / rotors. Nominal displacement: ± 2,5 liter per revolution. Maximum nominal capacity: ± 90 m3/h. Inlet and outlet connection: 101,6 mm SMS male. Maximum product pressure: 5 bar. Maximum pump speed: 600 rpm. The pump is used in a dairy for product pumping. The current motor with this pump is 7,5 kW - 1.465 rp ...

Grinding wheel gap: 1.5 / 50 mm, Max.width of wheel in feed grinding: 125 mm, Working wheel dimensions (od x id x width): 325x175x125 mm, Øext.min. working wheel: 220mm, Max. profile depth of the working wheel: 8 mm, Regulating wheel speed nº: infinite, Infeed (auto / manual): Automatic / Automatic, Driving wheel dimensions (od x id x width): 220 x 125 x 125 mm, Øext.min. driving wheel: 165 mm, Working wheel motor power: 7,5 Kw, Driving wheel motor power: 0.75 Kw, Angle of inclination of the working grinding head: +/- 5º, Angle of inclination of the drive wheel head: -2/+5º, Long: 1.520 mm, Width: 1.020 mm, High: 1.260 mm, Weight: 1.550 Kg

Manufacturer: KOKI TEC Model: SELBO III 350 Type: Inline selective soldering machine Specifications - Outer dimensions: 2,750 (L) x 1,430 (W) x 1,300 (H) mm - Minimum PCB size: 100 (W) x 100 (L) mm - Maximum PCB size: 350 (W) x 400 (L) mm - PCB thickness: 0.8 to 2.0 mm - Maximum component height: top side 110 mm or less, bottom side 25 mm or less - Program steps: 400 steps, 100 files - Nozzle diameter: inner diameter 2 to 20 mm - Solder capacity: approx. 16 kg (specific gravity 7.3) - Nitrogen supply: 0.5 MPa, 25 L/min per pod - Air supply: 0.4 to 0.5 MPa - Power source: 3-phase AC 200V plus/minus 10 percent - Power capacity: 2 kVA (fluxer) / 14 kVA (heater) / 6 kVA (solder pot) - Net weight: 420 kg (fluxer) / 370 kg (heater) / 450 kg (solder pot) Find more here - / Contact us at -

turning diameter over bed: 3750 mm turning diameter over slide rest: 3250 mm turning length: 15000 mm centre distance: 15000 mm faceplate: 3000 mm workpiece weight: 120 t steady: + 15t Rest: 2 main drive: 119 kW spindle bore: 105 mm spindle turning speed range: 0,33 - 75 U/min feed in x - axis: 300 mm/min feed in y - axis: 150 mm/min tailstock quill diameter: 500 mm total power requirement: ca 140 kW weight of the machine ca.: - t dimensions of the machine ca.: - m - 2-Carriages - Face Plate 3000mm - 6-Steady Rests - 4-Way Bed Construction - Taper Attachment - Inch/Metric Threading - Tailstock With Live Center The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Scoring Casting Machine Arburg 470C 1500-400 BJ 2006 Injection moulding machine Arburg 370H 600-290 BJ 2010

Key data: 26 KW, 230 V

Viessmann Gas/LPG Sterling Micro-CHP Vitotwin 300-W CH3HC-26 Gas/liquefied petroleum gas sterling micro-CHP electricity and heat generator from 2014, unknown operating hours, with 800 l accumulator and new spare parts (control board, condenser, air distribution valve, gear motor). 1.0 KWel, 230 V / 50 Hz. Manufacturer: Viessmann Model: Vitotwin 300-W CH3HC – 26 Type: Gas and LPG Sterling Micro CHP Heat output (TV/TR 50/30 °C) [kWth] 3.6–26.0 Heat output (TV/TR 80/60 °C) [kWth] 3.2–24.6 Electr. Output (gross) [kWel] 1 Serial Number: 7369298401232109 Engine: microgen linear free piston sterling engine Engine power [KWel]: 1 Year of Make: 2014 Operating hours: unknown Weight [kg]: 230 Dimensions LxWxH [m]: 0.50 x 0.50 x 1.00

Steiger work platform 30m Type OMME 3000 RBD Rubber tracks Year of construction 2006 Weight 4000 kg Private sale from the Hanover location Price from location 16,000,-- euros I offer as an intermediary on behalf of the owner. The information is non-binding, the prior sale is reserved. Dismantling, loading and shipping on request! I am happy to answer any further questions you may have. Wilfried Goldmann +49 173 6242 600 (also WhatsApp)

Used grinding mill from UPMACH Superfine Crusher type SFG 300, year of manufacture 2023. The machine is in working order, not used much. Fine mill with grinding head cooling system (chiller). It has a manual adjustment of the degree of fineness. Spare disc included.

Inv. Num. : 9119 Type: DRM Max 3001.30PrkGb Producer: MicroStep Created: 2024 Parameters: The machine is in good condition.

Russell Finex 30224 Vibratory separator 2015, stainless, five deck separator, with stainless meshs, 3Ph

Sleevemaschine Speed 10.000 bph magazin wiwth 2 rolls and non-stop roll changeover

Candles: 08 cartridge type: code 41 with fin end, 3 locking tab ext 222 O-ring

with optical orientation Working direction: left-right

Working Temp Max 120C? Max Pressure 8 Bar Volume 17L

Manufacturer: Klieverik Type: GTC-3400 Year of Manufacture: 2005 CE Mark: Yes Working width: 3,400 mm Voltage: 400 V / 50 Hz Current: 27 A Find more here - / Contact us at -

A Durmazlar guillotine shear distributed through Knuth is available. Working width: 3020mm, max. sheet thickness: 8mm, motor power: 18.5kW, stroke: 140mm, stroke rate: 14/min, max. pressure capacity: 210bar, oil tank capacity: 250l. Machine dimensions X/Y/Z: approx. 2650mm/3400mm/2300mm, weight: approx. 7500kg. Documentation available. An on-site inspection is possible.

Lippert Belt Conveyor Riser with arch and straight GF 3130-550-400 RA2507 Technical data: Conveying length (NL): 3130 mm (ascending conveyor 2475 mm + arch 655 mm) Framework width (NB): 550 mm belt width (GuB): 400 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Belt: Type HSL 8 E Year of construction: 2001 Slope/slope: adjustable Optionally available: Supports Side guides frequency converter for stepless speedcontrol Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2001 condition: good (used) Conveying length in mm: 3130 ( 2475 + 655 ) Nominal / outside width in mm: 550 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive Z ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 88113 € : 1665.34 € : 220 to : 3050 mm : Y1 / Y2 / X Achse : 265 mm : 2600 mm : 450 mm : 530 mm : hydraulisch : 140 mm/s : 10 mm/s : 140 mm/s : 500 mm/s : 350 mm/s : 250 mm : 900 mm : 104 mm : 250 l : 22 kW : 4250 mm : 1770 mm : 3000 mm : 12600 kg Standard accessories: 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15", - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on  ...

: neu : 2025 : 060077 : prompt, Zwischenverkauf v : Türkei : 14200 € : 272.64 € : 1 : 1 : Schwenkrahmen : 4160x34x1,1 mm : 15 - 120 m/min : 320 mm : 320 mm : 450x320 mm : rund 320 mm, quadrat 320 : rund 320 mm, quadrat 320 : rund 320 mm, quadrat 320 : rund 320 mm, quadrat 300 : rund 230 mm, quadrat 220 : 860 mm : 0.37 kW : 2.2 kW : 0.12 kW : 2230 mm : 1150 mm : 2140 mm : 1030 kg Double mitre cutting Inverter Saw blade 34 Hydraulic vice Heavy duty gearbox Hydromechanic blade tension Saw band brush Digital read out for mitre angle Coolant equipment Operating manual in English or German OPTIONS: Roller tables and band saw blades on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mm y-travel: 340 mm z-travel: 460 mm Control: Fanuc total power requirement: kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roboter Fanuc Robot LR Mate 200iC Robot Controller R-30iA Mate Year of Make: 2011 Scope of delivery: Robot LR Mate 200iC Type A05B-1139-B204 I Pendant A05B-2518-C202#EGN Fanuc System R-30iA Mate Type A05B-2553-B061 Cables In addition, spare parts are always available from stock. The robot is fully functional and can be visited. 2 weeks commissioning warranty. No further warranty.

Belt width: 300 mm, Description: Adjustable height between belts, Power: 3 x 400V, 50Hz, 16A, Dimensions: 1650 x 700 x 1600 mm

Power (KVA): 45

900 mm wide Breyer sheet coextrusion line for PP/PS:, Refurbished in 2011., 3 component Dosing Mixing Station, Main Extruder, diameter 120 mm L/D 32, 350 - 375 kg/ hr through-put., Coextruder diameter 90 mm L/D 32, 300 - 350 kg/ hr through-put., 6 x Zone Electrically heated fan cooled barrel., Both Extruders with Hydraulic Double Pot type screen changers with Hydraulic Power Pack., Both Extruders equipped with EXTREX Melt-Pumps, ABA Configuration Adapter, Breyer 900 mm wide Inclined flex lip sheet Die. Thickness Range 0.5 mm to 2 mm, 1200 mm wide Breyer 5-Roll Polished Chrome cooling stack, with 670 mm, 400 mm, 400 mm dia. Rolls, Driven by individual Indramat Servo Motors, 2 x Extra Rolls available but not installed on the Stack, Roller Conveyor, 2 x Rubber Roll nip Take-off., Pump group with heat exchangers for roll cooling., Breyer double station haul off with circuler knife shear cut  ...

This 4-axis HAAS DS-30SSY was manufactured in 2013. It features Y-axis milling capability, a sub-spindle, and live tooling, enhancing its versatility for various machining tasks. The machine includes a 12-station bolt-on turret and comes equipped with a chip conveyor and mist collector. If you are looking to get high-quality turning capabilities, consider the HAAS DS-30SSY horizontal turning machine we have for sale. Contact us for further details.

x-travel: 3.600 mm y-travel: 920 mm z-travel: 820 mm control: iTNC530 Heidenhain B - axis: +/- 90 x 1 ° C-axis: 360 x 0,001 ° feed X/Y/Z-axis: 1 - 20.000 mm/min rapid traverse X-axis: 100 m/min rapid traverse Y-axis: 60 m/min rapid traverse Z-axis: 60 m/min spindle turning speed - stepless: 20 - 10.000 U/min tool taper: SK50 power capacity at 100 % load: 32,00 kW power capacity at 40 % load: 48,00 KW max. torque at 40% / 100% load: 294 / 196 kW table surface area: 4.200 x 900 mm number of T-slots: 9 T-slot - distance: 100 mm T-slots: 1x 18H7 / 8x 18H12 table load capacity - central/maximum: 4.200 kg tool magazin:: 80 tool diameter: 115 mm wotkpiece diameter with 2 vacant positions: 160 mm tool length - max.: 360 mm weight of tools max.: 12,00 kg total power requirement: 85,00 kW weight of the machine ca.: 32,00 t dimensions of the machine ca.: 11,50 x 6,60 x H3,30 m Vertical machining  ...

This 3-axis HARTFORD HSA-323 gantry milling machine was manufactured in 2021. It features a substantial table size of 3000 × 2200 mm and a maximum table load of 10,000 kg. The machine offers impressive travel distances with an X-axis of 3000 mm, Y-axis of 2300 mm, and Z-axis of 1000 mm. If you are looking to get high-quality milling capabilities, consider the HARTFORD HSA-323 machine we have for sale. Contact us for further details.

capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 105 mm capacity 90 degrees: flat: 180x70 mm : 110 mm : 95 mm : 135x60 mm : 120 mm : 100 mm : 135x60 mm : 180 mm dimensions of saw-blade: 350x32x3,4 mm turning speeds: 1700/3400 U/min weight of the machine ca.: 600 kg Control: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Trumpf Model: TruLaser 3030 Type: 3030 (1500 x 3000 mm working area) Laser type: CO2 Laser power: 4,000 W Year of manufacture: 2008 Electrical and Utility Data - Mains supply: 400 V / 50 Hz - Connected load: 88 kVA - Control voltage: 24 V - Required fusing: 3 x 160 A - Compressed air: 7 - 10 bar - Nitrogen (N2): 30 bar - Oxygen (O2): 20 bar Maintenance: twice a year by Trumpf Usage: 1 layer Condition: excellent condition (works reliably without problems) Find more here - / Contact us at -

pressure: 160 t chamfer lenght: 3200 mm Control: CYBELEC CybTouch 15 PS weight of the machine ca.: 14.000 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 335 mm saw band length: 4400 x 34 x 1,1 mm table height: 750 mm : 550 mm : 335 mm : 550 x 335 mm : 330 mm cutting speed: 320 x 335 mm down speed: 200 mm dimensions of saw-band: 200 x 335 mm workpiece weight: 15 - 150 m/min : 3,0 kW work height max.: 1500 kg connected load: 2400 x 2200 x 1900 mm Equipment: - Automatic feed unit - Material end Light barrier - Clamping pressure regulation for automatic machines - Manual saw blade tension - Laser light for cutting line display/scoring saws - Water spray gun The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2021 : 90004 : prompt, Zwischenverkauf v : Türkei : 22600 € : 1 : 3100 mm : 4 mm : 42 1/min : 1,5 ° : 750 mm : 7,5 kW : 2 Stk. : 800 mm : 450 mm : 3700 mm : 2300 mm : 1350 mm : 3730 kg mot. back gauge with digitalreadout DT 5 hold down with rubber pads side lay with T-sluts 2 supporting arms balls in the table tilt stop light barriers on the back of the machine cutting line illumination user manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 6101B : prompt, Zwischenverkauf v : 560 € : 1 : 3000 mm : 400 mm : 60 mm : 29 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 450 mm max. module: 4 mm internal dia. - min.: 100 mm internal dia. - max.: 300 mm Maximum permissible peeling wheel diameter: 175 mm Diameter of the installation area: 125 mm slide travel X-axis: 350 mm slide travel Z-axis: 300 mm slide travel Z-axis: 440 mm Largest swivel range of the peeling head: ±25 Grad workpiece table outer diameter: 570 mm Workpiece table – Maximum permissible load: 5 kN Feed - X: 12000 mm/min Feed - Y: 5000 mm/min Feed - Z: 8570 mm/min Tools speed: 0-3000 U/min Workpiece table speed: 0-1500 U/min voltage: 400 V Control: weight of the machine ca.: 11 t dimensions of the machine ca.: 5,85 x 8,3 x 3,8 m Technical specifications: - CNC Siemens 840 sl - Swivel grab travel: 180 degrees Fluids: - Hydraulic: 150 l - Coolant: 850 l - Engine and hydraulic cooling: 100 l - Grease lubrication: 2 kg The data for this ad was cr ...

: 3050 mm : 06,0 mm : - : 0,5-3,0 ° : 1000 mm table height: 770 mm work height max.: 0 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator -Container rotating device: Welding rotating device -Drive motor: 0.75 kW with variable speed gearbox -Load capacity: kg -Roller spacing: 315 - 965 mm, rollers Ø 230 x 160 mm overall width -Rolling speed: 0.05 to 0.95 m/min Right/Left rotation -Control unit: with foot pedal -Individual components: see photos -Transport dimensions: 1140/730/H750 mm / 890/440/H750 mm / 700/600/H955 mm -Total weight: 714 kg

Container rotating device, welding rotating device, roller stand, rotators, pipe straightening system, roller stand rotating device -Roller stand: Container rotator without drive, 2 pieces -Roller spacing: 315 to 965 mm -Rollers: 2 pieces on each side, Ø 250 x 140 mm -Load capacity: kg -Dimensions: 890/440/H800 mm -Submission/Price: complete -Transport dimensions: 890/880/H800 mm -Weight: 506 kg

Find more here - / Contact us at -

Manufacturer: Ratti Year of Manufacture: 2008 Model: R 325N DT Number of spindles: 90 Number of sections: 10 Spindle type: Tangential belt drive Max. mechanical spindle speed: 9,000 min-1 Max. technological spindle speed: 7,000 min-1 Spindle pitch: 366 mm Whorl diameter: 52/64 mm Twisting range: 40 to 1,869 / 32 to 1,519 tpm Yarn count range: 167 to 560 dtex Feed Package - Type: Bobbin - Max. length: 290 mm - Max. diameter: 250 mm - Volume (smooth yarn): 4,500 g Winding - Number of winding decks: 1 - Traverse gear: UDR - Max. bobbin diameter: 250 mm - Traverse stroke: 250 mm - Tube diameter x length: 69 x 290 mm - Max. mechanical winding speed: 200 m/min - Max. technological winding speed: 170 m/min Machine Frame Dimensions - Number of sections: 10 - Length per section: 1,830 mm - Total machine length: 19,000 mm - Machine width: 860 mm - Max. height: 1,756 mm - Height to ...

Manufacturer: Ratti Year of Manufacture: 2008 Model: R 325 NF Spindles per section: 14 Number of sections: 1 to 12 Total number of spindles: 126 Spindle type: DT 140 Spindle drive: Tangential belt Max. mechanical spindle speed: 14,000 min-1 Min. mechanical spindle speed: 6,000 min-1 Max. technological spindle speed: 12,000 min-1 Whorl diameter: 35 mm Twisting range: 59 to 2,777 tpm Yarn count range: 33 to 330 dtex Feed Package - Type: Cops (ring-spun bobbin) - Feed package length: 420 mm Winding - Number of winding decks: 1 - Traverse gear: UDR - Max. bobbin diameter: 250 mm - Traverse stroke: 200 mm - Tube diameter x length: 56 x 230 mm - Max. mechanical winding speed: 150 m/min - Max. technological winding speed: 140 m/min Machine Frame Dimensions - Length per section: 1,830 mm - Total machine length: 2,554 + (1,830 x n) mm - Machine width: 860 mm - Max. height: 2,14 ...

with digital display

Key data: 1300 kN, 127 g/PS, 35 mm

1.0 St. gebr. Two-component injection molding machine with robot Manufacturer: ARBURG Type: 420C1300-350-60 Year of Make: 2003 Clamping force: 130 tons Spar spacing 420 x 420 mm Screws DN 1: 35 mm Moulded part weight in hp: 127 g Screw DN 2: 25 mm Moulded part weight in hp: 45 g Control: Selogica Equipment: . Core train -Robots

This 3-axis TRAUB TNA 300 horizontal turning machine was manufactured in 2000. It features a spindle diameter of 65 mm and includes a high-pressure coolant system, driven tools with 4 kW power, and an automatic bar change system. The machine is equipped with a chip conveyor and tool monitoring systems for enhanced efficiency. If you are looking to get high-quality turning capabilities, consider the TRAUB TNA 300 machine we have for sale. Contact us for further details.

This 3-axis Werth Scopecheck 300S was manufactured in 2021. It features a measuring range of 300 mm x 200 mm x 200 mm and a resolution of 0.1 µm. The machine includes a multisensor concept with optical, scanning multi-probe, and laser sensor capabilities. If you are looking to get high-quality measurement capabilities, consider the Werth Scopecheck 300S CMM machine we have for sale. Contact us for further details.

: gebraucht : 2023 : 1675 : prompt, Zwischenverkauf v : Bulgarien : 17600 € : 1 : 325 mm : 1000 mm : 165 mm : 32 mm : 190 mm : 200 mm : 5 : 4,5 MK : 12 : 85 - 2.000 1/min : 48 : 0.006 - 1.77 mm/U : 0.003 - 0.885 mm/U : 0.1 - 28 mm : 75 - 2,5 Gänge/ : 0.1 - 1.75 : 150 mm : 95 mm : 40 mm : 3 MK : 100 mm : 2.2 kW : 2150 mm : 950 mm : 1350 mm : 770 kg demo machine / mint condition net price (price for new machine € 21.690,00) driven by manual transmission 3-axes digital readout Fagor 40i quick change toolpostAmestra with 4 holders (3 square, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 160 mm spindle dead center coolant equipment full length rear splash guard leadscrew and shaft protection safety guard for the chuck toolholder guard levelling bolts and plates quick release tailstock low voltage machine lamp operating manual machine according to ",CE", incl. following optional equ ...

: neu : 2025 : 090080 : prompt, Zwischenverkauf v : Türkei : 32100 € : 613.11 € : 1 : 3100 mm : 4 mm : 42 1/min : 1,5 ° : 750 mm : 7.5 kW : 2 Stk. : 800 mm : 450 mm : 3700 mm : 2300 mm : 1350 mm : 3730 kg mot. back gauge with digitalreadout DT 5 hold down with rubber pads side lay with T-sluts 2 supporting arms ball in the table tape measure tilt stop light barriers on the back of the machine cutting line illumination user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 144300 € : 2727.27 € : 320 to : 3050 mm : Y1 / Y2 / X und R Achse : 365 mm : 2600 mm : 410 mm : 630 mm : hydraulisch : 160 mm/s : 10 mm/s : 160 mm/s : 650 mm : 500 mm/s : 250 mm : 900 mm : 104 mm : 2 x 11 kW : 4300 mm : 1820 mm : 3330 mm : 16500 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5 in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup a ...

x-travel: mm y-travel: mm z-travel: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 97400 € : 1840.86 € : 2050 mm : 30 mm : 30 mm : 25 mm : 25 mm : 20 mm : 350 mm : 350 mm : 260 mm : 1,5-5 m/min : 22 kW : 5000 mm : 2000 mm : 1900 mm : 11000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommende ...

cutting diameter: 300 mm saw band length: 3900 mm total power requirement: 3 kW weight of the machine ca.: 0,3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.