We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
meta name="robots" content="all">
119,436 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Working width: 2500mm, with controls.
used
With High-Voltage Generator Tantec HV2002, connected load: 1100W.
used
Treatment bath with cooling pipes. Belt discharge and drying blower
Ladies and gentlemen, Pictures and further information on request. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire transport process is carried out at the buyer's own expense and at the buyer's own expense. We cannot be liable for personal injury and damage to property in the case of dismantling by the buyer in this context. Place of jurisdic ...
used
: Plant used separation / separation system Manufacturer: Schauenburg Type: MAB 125 Engine type: 1130-1190 Year of construction: 1992 Power: 125 m ³/h Speed: 1000 rpm KW: 2.7
used
M. Number: 405198 Item: 381021 Power supply: 230V / 50Hz Power: 0.55KW Max pump pressure: 14 bar Max operating pressure: 14 bar Mediumstem min / max: 5/35 C Min concentrate flow: 84l / h Permeate Max: 250l / h Permeat backpressure max: 0.3 bar
used
Through annealing furnace PADELTTHERM Type: Raw 50 X 15 X 150 - E Circuit diagram no.: 6 - 16-4 BP Order No.: 9070/4 Year of construction: 2000 Rated voltage 400 ~ V Control voltage 230 V Nominal power 32 KW Protection class IP 54 Nominal current 58 amp. maximum temperature of 1050° C Weight 2250 kg very little in a University used.; good condition, like new
used
WATER TREATMENT PLANT CONSISTING OF WELLMATE WATER SOFTENING & REVERSE OSMOSIS SYSTEM MERLIN RO-EASY 40 S. No.: RO-EASY40 – 151557/201 Equipment / Additional information: V 230 // Hz 50 // A 2,4 // KW 0,55 Permeate output at feed water temperature 15 ° C and 4 bar flow pressure: 40 I / h (incl. Pressure vessel 25 I)
used
Water filter station, water treatment with diesel engine and compressor in container used manufacturer: Type: WFS 3/76 Year of construction: 1977 The operation can be done with third-party network or own network via: Diesel engine FIMAG Finsterwalde Type 6-1521/104-0 10 kVA 14.8 A 390 V 50 Hz follow Total dimensions: approx. 6 x 2.4 x 2.4 m Changes and errors in the technical data, information and prices as well as intermediate sale reserved.
used
- Oil extraction unit KAISER, 100-400 l/min - Screening belt, belt width: 800 mm, length: 2,000 mm, SEW-Eurodrive 0.37 kW - Monopump NETZSCH NM045BT, YOC 2001, GETRIEBEBAU NORD Gear Motor - Rotor of progressing cavity pump - Peristaltic pump DEPA ELRO ME5 - Gate valve, length: 275 mm, Ø 200/80 mm (outside/inside) - Control cabinet - 2 x agitators - 2 x stainless steel pipe with branch (approx. 1 m long)
used
System Components: Control Panels (in control room) Washing Unit - 1 set Control Panel Centrifugal Ventilator - 22KW Booster Pump System - 15HP Pre-Heater - 780,000Kcal/hr - 1 set Control Panel Shot Blast Machine - 1 set Control Panel Bucket Elevator - 2 sets Air Receiver Tank - 3cu.m Dust Collector - 1000cu.m/min Dust Collection Buckets Water Paint Booth - 1 set Control Panel Air Motor - 100PSI - 3 units Air Diaphragm Pump - 1 unit Mixing Bucket - 2 units Paint mixing tools and jigs Activated Carbon Tower - 400cu.m/min 1 set Dry Oven - 300,000Kcal/hr Control Panel Marking Unit - 1 set Control Panel Rectifier IN/OUT Conveyor - 4.6MW x 230.95ML Control Panel Accessories/other items included: Portable Vacuum Recovery - 1 unit Fan - 11KW; 3P; 440V; 60Hz Exhaust Fan - 1,646W; 220V CO2 Mag Welders - ProPAC600A - 3 units Gouging Machine - LH ...
used
Was used for cleaning perforated metal sheets, including documentation, without accessories or spare parts.
used
Output: 300l/h, output: 300l/h, suitable for the treatment and reuse of rinse water, wash water, paint rinse water, cleaning solutions, waste water from crack testing and other liquid production residues.
used
Output: 2000l/h, efficiency/yield: 70%, feed water pressure: 3-6bar, operating temperature 5-35°C, length: 850mm, width: 2450mm, height: 1950mm, with documentation, without storage tank, inspection is possible.
used
Flow rate: 48,000l/h, flocculant: WINfloc 7418 CF, max. capacity reaction tanks: 4160l, control: PLC 7/15 inch, connected load: 6kW, length: 2180mm, width: 2500mm, height: 3100mm, with documentation, on-site inspection is possible.
used
1 - Aerzen GM7L - Rotary lobe blower unit Delta Blower generation 5. Positive pressure. Suction pressure: 0,613 bar Discharge pressure: 1.013 bar Power : 7.5 kW Flow rate: 420 m3/h Oil free ATEX classification Weight : 381 kg Equipment sold with original filter + a new one. Blower with silencer, frame integrating a resonance absorber, machine feet, connection to the body with silencer for non-return valve, safety valve, vaccuostat with pressure gauge. 2 - Infastaub MKR 0-1/20 - Secondary safety filter Temperature: 0?C/+40?C Filter surface: 20 m2 Volume: 360 m3/h Structural resistance: - 500 mbar Filter quality: H14 Filter body : Stainless steel ATEX classification Equipment sold with original filter + a new one.
used
Manufacturer: Infastaub GmbH Model: Infa-mat AM 451 S Year: 2015 Type: bag / pocket filter Filtration area: 45 m2 Air volume: 4020 m3/h Housing resistance: up to +/- 35 mbar Fan power : 5,5 KW Soundproof housing Automatic and mechanical cleaning of the filters after the process by a vibratory drive Dust collection: bucket
used
Water treatment plant Manufacturer BWT Type Osmotron 2000-PH-S System was overhauled in 2020, new control cabinet from 2021 Year of construction 2000 Water treatment plant BWT Osmotron plant of BWT Pharma & Biotech GmbH for 2000l/h Aqua Purificata production
used
Water treatment plant Manufacturer BWT Type Septron Line 40 VAL Year of construction 2013 Capacity: 900 L/h ultrapure water Inlet pressure: 6 bar(g), raw water pressure 4-6 bar, raw water flow 1300 l/h Maximum temperature: 50°C Various electrical individual connections
used
Inv. Num. : 6043 Type: PRETREATmaker IV Producer: SCHULZE Generated: 2020 Parameters: Printer accessories for digital textile printing
used
SEKWANG Shot Machinery Co. Ltd SKHSS-4600 PRE-TREATMENT SYSTEM (2006) Including: -Main Pre-treatment system -Main control panels -Conveyor -Compressor -Dust and Fume Collector -Pre Heater -Shot blasting -Vacuum Recovery -Welding Machine -Blower -Mixing room Including an assortment of spare parts : Bearings Chain Belts Manganese Filter Sacks, etc. Make SEKWANG Shot Machinery Co. Ltd Model SKHSS-4600 Year 2006
used
Ultrapure water treatment, EDI SNOWPURE / ELECTROPURE / EDWARDS EDI XLBOC-500 YL3201003 used, tested ! Dimensions: 570 x 420 x 220 mm
used
Qty. 1 Second-hand homogenising chamber furnace Mfc.: Schmitz + Apelt LOI Type: Chamber furnace – GDKV 195/267/770/1280 Built: 1996 Stopped: 2019 Heat treatment of Al profiles! Operation temp.: 160 – 270 °C Max. temp.: 300 °C Natural Gas heated Scope of supply: Frame of the furnace Heating facility Air circulation facility Entry & Exit furnace doors Separator slide Measurement & Control device
used
Wastewater cleaning system, drilling water cleaning, chip separator, paper filter, paper belt filter -Tank dimensions: 1000/700/H800 mm -Agitator: 0.75 kW -Speed: 1500 rpm -with: conveyor belt filter -Dimensions: 1100/710/H1650 mm -Weight: 130 kg
used
Containerrised water treatment installation . consisting of three 20 FT offshore containers build onder DNV One for the power supply with a Scania engine type DI 16 55 M 532 KW 1800 rpm connected with a Leroy Somer generator type M 47.2L9C6S4 including switchboard with circuit breaker and fuel tank . Two containers with the Hatenboer water treatment installation capacity 200 M/ day photo's from the installation available . infoperfectmachinery.nl or +31 78 6158040 Whatsapp +31 6 53549259
used
Description: condensate treatment device Approx. Onsite Dimension. (l x w x h): 570 x 300 x 340 mm, weight approx.: 10 kg
used
Used equipment for the treatment and the preparation of water It is a reverse osmosis that produces a filling water called TABLE WATER Manufacturer UAT UNIVERSAL AQUA TECHNOLOGIES INC USA Model TP 110K Year of production 2001 Capacity 12 000 L h Operating hours 9 810 Volts 380 Hz 50 Ph 3 Description of equipment MM FILTER INPUT WATER TREATMENT REVERSED OSMOSIS UAT UNIVERSAL AQUA TECHNOLOGIES INC USA 2001 DEMINERALIZED WATER TANK 12 m3 PUMPING BLOCK FOR MINERALIZATION MINERALIZER MINERALIZED WATER TANK PUMPING BLOCK FOR WATER DISINFECTION AND DELIVERY TO FILLERS Technological description of table water production a General The plant for the production of table water has a capacity of 12 000 l h It consists of Sand filter Device for reverse osmosis TP 110K Product water tank Pump for mineralization of product water Mineralizer Mineralized water tank System for ozonation disinfection of min ...
used
Treatment swivel chair KAVO Physio One, S/N 2014-12-200003060, cover midnight blue
used
Treatment swivel chairs 1 pc. KAVO 5005, 2 pcs. KAVO 5006, purchased in 1996, total 3 pcs.
used
Description: For sale is a complete Hardening Shop with three Gas Carburising furnaces , two Tempering Air Circulation Furnaces , a Quenching Basin and a Washing Machine . For an overall impression, please take a look at the 3D tour. In the tour you can explore the hall over two floors: LINK TO THE HARDENING PLANT Brief description of the system components 3 x GAS COOLING FURNACE TYPE VCE 200/200 as electrically heated shaft furnace Furnace temperature max.: 1000° C Batch temperature max.: 950° C Batch weight max.: 18 tonnes Useful diameter: 2000 mm Effective height: 2000 mm Clearance diameter of guide cylinder: 2000 mm Oven housing diameter x height: 3450 x 3230 mm Oven connected load: 4 zones of 80 kW each = 320 kW 2 x AIR CIRCULATION FURNACE / TEMPERING FURNACE TYPE LUO 200/200 as electrically heated shaft furnace Oven temperature max.: 750° C Batch temperatu ...
used
Description: Waste Water Treatment System Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg
used
Description: Air flow rate 42.83 m³/min Motor power 250 kW Machine dimensions 4000 x 2100 x 2500 mm Pressure min. 4 bar Pressure max. 13.5 bar Description: The pneumatic container is used to provide oil-free dry compressed air (42 m³/min max. compressed air (42 m³/min max. 7.5 bar) for test equipment and consists of: a self-contained functional container unit in which the following machines machines are integrated as shown schematically in Figure 2: - Compressor EKO 250 D - Refrigeration dryer HHDp 4500/HF 5-M/5 - BEKO Clearpoint L 3400 V activated carbon adsorber - Post-filter HF 6-60 - Oil-water separator BEKO Öwamat 16 - Electric condensate drain BEKO 14 for further technical details please refer to the PDF file Approx. Onsite Dimension. (l x w x h): 12,200 x 3,000 x 2,900 mm, weight approx.: 20,000 kg
used
Grinding oil treatment plant, filter system, cooling system, cleaning system used; Manufacturer: TRANSOR Filter GmbH; Type: 3890-800A; Year of construction: 2002, rebuilt in 2010; only for low-viscosity abrasive oils; Filter capacity approx. 60-70 l/min; Filter fineness: 3-5 μm; dirty oil tank 400 l; clean oil tank 400 l; Max oil temperature: 60°C; Cooling capacity 6.1 kW; Dimensions: approx. 1700 x 1100 x 2400 mm; Fully automatic regeneration of the filter rods.; No filter aids (e.g. diatomaceous earth) are required for the system;
used
used
Surface reference plates, roughness measures, 8 pieces MASSI surface grinding TGL 0-4763, DIN4763 Rz = 0.63 μm, Rz = 1.6 μm, Rz = 3.2 μm Drehen TGL 0-4763, DIN4763 Rz = 1.6 μm, Rz = 3.2 μm, Rz = 6.3 μm, Rz = 10 μm, Rz = 20 μm im Holzkasten used, tested ! Dimensions: 225 x 120 x 40 mm
used
used
Schroeder-Combinator / scraped surface heat exchanger technical details: capacity/ flow rate: 20-100 ltr/h against 12 bar engine power: 3,5 KW dimensions: length x with x higth : 170 x 43 x 85 cm weight ca.: 150 kg with this device you can go with: hight viscosity and lumpy food for heating, cooling, mixing and pumping
used
Discus level sanding machine with Vertikaler-Schleifspindel and Schleifradaufnahme f?r Ceramische-Schleifsegmente. Construction year 1957 the machine is technical and geometrically in very good state. it was waited up to Au?erbetriebsetzung 2006 regelmig. hydraulic table impulse: infinitely variable adjustably vertical delivery: hydraulically Schleifrad-Durchme?er: 600 mms impulse achievement: 22 kW Magnetabme?ung: 300 x 1,000 mms Schleiftischabme?ung: 400 x 1,700 mms
used
Waldrich-Coburg leadership roads and surfaces sanding machine type: 0-15 SNC 2520 X/3 m Max.-Schleiflaenge: 3420 mms Max.-Schleifbreite: 1450 mms Max.-working height: 1005 mms Aufspannflaeche length: 3000 mms Aufspannflaeche width: 1250 mms accessories: -table fine adjustment -Papierbandfilter-Anlage -Schipmke-Haan DK150 V - back chill arrangement surface need: L=11,8m B=4,9m H=4,7m weight: 29.4 to . their prize image we await with pleasure. OTHER: the machine still stands live and can be visited any time.
SLAB DIM.: 1000-3000 x 740-2000 x 180-350 MM - L x W x T, 250 KW, 7 TON/H
used
Pressureless dust dilters für mounting on top of silos, material bunkers etc. in mild steel design. Equipped with 20 pcs. textile filter tubes (each 200 mm Ø x 2.000 mm long), incl. elektrical vibration device for cleaning. Filtering surface: Ca. 25 m². In very good condition, several filters available (identical).
used
Surface grinding machine. Magnetic chuck of 550x250mm. Table travel: 700mm. Grind surface area: 600x350mm. Max. height: 375mm. Cross travel: 300mm. Wheel: 350x127x50 / 300x127x100 Weight: 2900Kg.
used
Large surface light LED: 70 watt lamp large surface Significant reduction in electricity costs and shortest payback period Housing stainless steel Easy to repair at failure of lamps (only bulb exchange, finished) to sensitive soldered light strip of conventional surfaces LED spotlights. No separate power supply. Input voltage 230V LED power consumption 70W comparison with conventional light sources: equivalent to 10 light bulbs 60 Watt Brightness in lumens 5800 LM Colour temperature 3200 K warm white 10 PCs LED bulbs 7 watts = 70 watts total power life > 30,000 hours dimensions 400 mm 300 mm 300 mm, weight approx. 7 kg light angle 120 ° With Wieland connector and Wieland junction box
new
Weibert FS 41 Planer - Thicknesser Planing width: 410 mm Drum: 4 turn blade shaft Motor power: 4KW n = 4500U/min, 400V Clearance height: 4-225 mm Westcott Chuck 0-16 mm Professional side the set stop WJ-300200 Special price: NET 2555,32,-
new
JPT-260 Planer - Thicknesser Planing width: 256 mm Drum: 3 - Strip cutter Engine power: 230V/400V 2650 W Thickness forward: 3-225 mm Feed speed: 5,5 m / min. Weight 170 kg G & JET-10000289T
used
Plasma cutting machine ESAB working area 1500 x 3000 1 x autogen up to 200 mm 1 x Plasma Hifocus 160 i with automatic gas console. see PDF document several plasma change torches available Very well maintained from: 10 / 2012; ready for use
used
Altronic surface coating for architectural glass Swiss manufacturer as good as new very precise conditioning CA 300 BH Year of construction 2009 New price of the plant 334.000,-€ net lt invoice / without commissioning The robots of rice with touch Los hook are also for sale designed for the solar industry, to get very thin coatings of sulfur on solar modules Here, it was important to achieve accurate distribution, had also worked. equipped with 9 x Linearruetteler type E-PLF 0.65 IP54 Overall dimensions of the coating plant: 180 w x 220 d x 210 h Editing dimension: ca. 130 w x 160 cm possibly even a belt conveyor is available incl control and adjustment table,
used
Type: UTK 18 200-2a-2e Power: 2 X 11 kW + 1 X 7.5 of kW, 380 V, 50 Hz Perslucht: max 20-25 bar Weight: 4,000 kg YOM 1985 Scraped surface heat exchanger for heating, temperature holding and cooling of liquid, vegetable, high viscous and crystalline products. Previous used for heating, holding (volume ± 85 ltr) and with steam cooling of food products (sauces) and ammonia (NH3, 125 ltr., 17 bar,-20 ° C / 45 ° C). 2 independent ammonia system. Constant quality of the product, continuous running and inline cleaning system (CIP).
new
- Hobelbreite 410 mm - Tischlänge gesamt 2650 mm - Aufgabetischlänge 1500 mm - Abgabetischlänge 1100 mm - max. Spanabnahme 8 mm - Sicherheitsmesserwelle FI 125 mm, Z 4 - Hobelmesserabmessung 410 x 35 x 3,0 mm - Drehzahl 4700 U/min. - Motor 4,0 kW (5,5 PS) / 400 V - Abrichtanschlag schwenkbar 0C-45C 1500 x 155 mm - Absaugstutzen FI 160 mm - CPS Messerwellenschutz mit Schutzprofil abklappbar - Bedienpult in Augenhöhe - Abmessungen L=2700, B=1000, H=1240 mm - Gewicht 650 kg
used
THICKNESS PLANER type SCM S 52 SURFACE PLANER type SCM F 410 SPINDLE MOULDER type SCM T 130 NOT SEPARATE SALE second hand machines