british flag
Resale Logo

stow flow rack used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information service for engines 100-7000 KW all types  August Storm GmbH & Co. KG  http://www.a-storm.de 
banner logo
start page > keywords stow flow rack > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
121704316 107

SPOTTI/VIGANO for sale
Cutting-To-Length Lines


Material width of 2,000 mm Material thickness 1.50-12,00 mm Coil weight of up to 30,0 tons Coilinnen - Ã? 500-800 mm CoilauÃ?en - Ã? 1.900 mm Material steel hot rolled / pickled and oiled Table ...
used machine
 
Material width of 2,000 mm
Material thickness 1.50-12,00 mm
Coil weight of up to 30,0 tons
Coilinnen - Ã? 500-800 mm
CoilauÃ?en - Ã? 1.900 mm
Material steel hot rolled / pickled and oiled
Table length mm
Working speed m/min.
Working direction of right ï links system consisting of:
Federal truck under floor (moveable)
Double Cone Uncoiler power 45,5 kW / per page
Coilöffner - / driver unit
(DUO-role structure), with mounting frame and roller (driven)
Transfer table
Leveler 1 make SPOTTI
168 kW
4-column design lift / lower - upper block through 4 drive units number - straightening rolls 15 (7 x up / 8 x below)
Leveling rollers - ø 110 mm
Number - supports 14 (7 x up / 7 x below), per page
Number - track rollers 14 (7 x up / 7 x below), per page
Height adjustment - upper roller block motor (see above)
Support roller adjustment - up hydraulically
Support roller adjustment - down motor (Gearmotor)
Control over roller brushing unit with suction device
Delivery via spindle stroke - power 15 kW
Control of roller leveler 2 make VIGANO
Built in 2003
138 kW
4-column version with 4 drive units
Lift / lower - upper block of 2 piece transfer case number - straightening rolls 17 (8 x up / 9 x below)
Leveling rollers - ø 48 mm
Number - supports 14 (7 x up / 7 x below), per page
Number - track rollers 9, per support height adjustment - upper roller block motor (see above)
Support roller adjustment - above on the upper block
Support roller adjustment - down motor (Gearmotor)
Measuring frame with measuring rollers mounted on machine design
(Discharge side - leveler)
Transverse scissors of part of make SPOTTI
Scissors flying version
Accelerating volume 1 with attached scrap soft
Accelerating volume 2
Drivers unit (DUO rolling scaffold) upper roller pneumatic deliverable
Stacking unit make SPOTTI
Number - scissor lift 2
with built Kettenförder units
Pages "push" via transfer case and connection shaft
Number - outlet chain conveyor 4
(Chain conveyor with weighing system 1)
Electrics
Hydraulic
Spare parts
2002
Price  
    request
121704312 1009

CAT 432F for sale
Dregde-equipped loaders


Number of previous owners - 1 CE mark - Yes Original colour Yes Accessories -Safety valve lifting rack -4 in 1 bucket Additional information Turbo Hydraulic quick coupler Ride control Telescopic handle Forks  ...
used machine
 
Number of previous owners - 1
CE mark - Yes
Original colour Yes
Accessories
-Safety valve lifting rack
-4 in 1 bucket
Additional information
Turbo
Hydraulic quick coupler
Ride control
Telescopic handle
Forks
1 extra shovel
In good condition
2014
35,000 €  
    request
121686801 109  

ATLAS COPCO GA 708 PE for sale
Screw air compressor Atlas Copco GA 708 PE


Screw air compressor Atlas Copco GA 708 PE Fully automatic, internally fully piped and wired compressor plant in very low noise compact structure; single-stage oil injected compressing, lufgefkühlt. Usable volume fl ...

 
Screw air compressor Atlas Copco GA 708 PE

Fully automatic, internally fully piped and wired compressor plant in very low noise compact structure; single-stage oil injected compressing, lufgefkühlt.
Usable volume flow rate, in accordance with DIN in 1945 at the outlet from the compact system measured and related to Ansugbedingungen pe at maximum operating pressure: 8 bar 122 1/s; 7.32 m ³/min

The compression system is designed for operating pressures of 4 to 8 bar

Main features:
-integrierten after cooler with water separator and autom. Condensate drain. An oil separator ensures low oil pressure air
-vollautomatische full load idle intermittent control with manual selector switch for Druchlaufbetrieb for economic compressor operation

Technical data:
Speed of the Haupläuffers: 4.020 min
-Leistungsbedraf including fans, based on the compressor shaft at working pressure pe: 8 bar 53.1 kW
7 bar 49.7 kW
6bar 46.3 kW
at idle, 16.5 kW
Noise level measured according to CAGI Pneurop at 1 meter distance: 74 dB(A)
Cooling air volume 108 m³/min
Compressed air outlet temperature 32 ° C
-Umgebungstempereatur max 40 ° C
Oil fill quantity 38 L
Residual oil content of compressed air 5 mg / m ³
Dimensions (Lxwxh) 2770 x 1136 x 1600 mm
Weight 1020 kg

Technical data of electric equipment, make Siemens:
Three-phase motor with squirrel-cage rotor
Rating 55 kW
Nominal speed 3000 rpm
Voltage / frequency 380 V 50 Hz
Protection class IP 23 F
Design B-5

 
Price  
    request
121686729 109

COMPAIR L 15- 22 50 Hz for sale
Screw air compressor CompAir L 15-22 50 Hz


COMPAIR screw compressor Baheggvly2 Type L15-10A, Model year 2011, CE mark Digital PLC control, final compression pressure 13 bar Engine 15 kW Engine speed ~ 3,000 rpm Flow 2.26 m ³/min Soundproofed only ...

 
COMPAIR screw compressor
Baheggvly2
Type L15-10A,
Model year 2011, CE mark
Digital PLC control, final compression pressure 13 bar
Engine 15 kW
Engine speed ~ 3,000 rpm
Flow 2.26 m ³/min
Soundproofed only 68 dB(A)
Weight approx. 440 kg, dimensions Lxwxh 800 x 670 x 1,160 mm, very good, checked state
 
Price  
    request
121685836 709

SIDAM polotunnel for sale
extrusion wrap packaging line


ice cream extrusion wrap packaging line; cap. 720 trays; 6-9 products per tray; tray dim. 300x430 mm; freezing time 15-60 minutes; consisting of : carousel with ammonia evaporators; 3 fold dispensing; for magnum sticks,  ...

 
ice cream extrusion wrap packaging line; cap. 720 trays; 6-9 products per tray; tray dim. 300x430 mm; freezing time 15-60 minutes; consisting of : carousel with ammonia evaporators; 3 fold dispensing; for magnum sticks, pies and ice cream sticks; finishing machine with chocolate bath and flow ripper; control box; various filling forms
 
used machinery auction RESALE 20,000 €  
  NL   request
121679297 601  

BLOW ROOM MACHINERY 1990 for sale


1 X BLENDOMAT BDT 019 (40M) , 1989 1 X BLENDOMAT BDT 013 (12M), 1990 1 X BLENDOMAT BDT 013 (12M), 1990 1 X FINE OPENER FO 088, 1996 1 X SECUROMAT SCF 154, 1997 1 X FOREI ...

 

1 X BLENDOMAT BDT 019 (40M) , 1989

1 X BLENDOMAT BDT 013 (12M), 1990

1 X BLENDOMAT BDT 013 (12M), 1990

1 X FINE OPENER FO 088, 1996

1 X SECUROMAT SCF 154, 1997

1 X FOREIGN PART SEPARATOR SP-F, 2004

6 X CONDENSOR LVSA, 1990 – 1993

1 X AXIFLOW AFC, 1990

1 X MULTIMIXER MPM (8 X) 1400, 1990

1 X MULTIMIXER MPM (10 X)1400, 1990

1 X CLEANER BEB-RN, 1990

1 X CLEANER RN, 1990

1 X CLEANER RV, 1990

3 X DUSTEX DX, 1990

2 X METAL DETECTOR EMA, 1990

1 X MIXER GECA, 1990

2 X WASTE MIXER, 1990

2 X CLEANER RV, 1990
 
Price  
  AE   request
121632737 203

WEINIG HYDROMAT H23C for sale
Four-sided planing machines


-machine in stock -After reviewing the technical -very good condition -year of manufacture 2001 TECHNICAL PARAMETERS: PLANER: -planing width 230 mm -planing height 180 mm -spindle diameter 50 mm -the maxim ...

 
-machine in stock
-After reviewing the technical
-very good condition
-year of manufacture 2001

TECHNICAL PARAMETERS:

PLANER:
-planing width 230 mm
-planing height 180 mm
-spindle diameter 50 mm

-the maximum diameter 220 mm

-the feed rate to 80 m/min
-adjustable feed on the inverter

1) head the lower 15 kW
2) head right 11 kW
3) head left 11 kW
4) upper head 11 kW
5) upper head 18 kW
4) lower head 22 kW

-electrically height-adjustable
-electrically adjustable upper heads
-pneumatic clamps

-cardan shafts feed
-five top steel roller
-the two upper rollers, rubber
-four rolls in the worktop extending

-auxiliary pressure on the left of the head
-the last two heads on podtrzymkach
-nozzle diameter 140 mm

SYSTEM ADMINISTRATION:
-packet length 6100 mm
-width: 1200 mm
-height 1300 mm
-the possibility of stacking two packages at the same time
-for
-the brackets to the narrow items
-chain feeder 2500 mm
-initial material segregation
-Cross-feeder Planer 1500 mm
-hydraulic Accelerator

SYSTEM:
-conveyor 7000 mm
-the receiving table transverse conveyor 2100 mm
-receiving rollers-powered 6000 mm
-receiving roller and adjustable flame launchers, 7100 mm
-gravity rollers receivers

Automatic line strugaj?ca Weinig is a system for improving productivity, while increasing its efficiency. Solutions of this type are directed to the companies that make the process of automation of production facilities. Planing process elements is operated by two persons who are responsible for the initial choice of material and the reception. The principle of operation of the line shall be as follows, the material is delivered with a forklift on the chain conveyor, which thanks to its long sleeps two packages at the same time. This affects directly the effectiveness as it unfolded one of the operator can immediately place again at the right place, without downtime caused by not delivering material by fork-lift truck. Rozsztalowania system tilts the entire package and raises it at the same time, releasing the single guides layers that directly hit the chain feeder. The individual elements at this stage pass prequalification for those suitable for planing and waste. Material not suitable for further processing is separated by an operator who has a position at this stage, who, through the button adjusts the rollers stop line continuity by what material falls under the tray and does not goes to the Planer. Material that has passed segregation and is suitable for further stage goes through gravity rollers for another chain feeder. At the end of the feeder is equipped with a system of rollers and hydraulic Accelerator, which is responsible for moving items from the tray to the Planer Weinig Hydromat H23C. Planing process then takes place elements that has the possibility of processing them at speeds up to 80 m/min. Integrated system of elements after the planing them tape feeder table transverse equipped with automatic system dump the material. At this stage, ready to cross conveyors transporting it over the core. Material when you hit the Skate moved
is them to ejectors which expel material on gravity rollers where they are received by the employee. The line is the ideal solution for companies who appreciate the quality and the efficiency of the elements. Planer is able to meet even the most demanding expectations, while the system input and output only to increase its performance.
 
Price  
  PL   request
121632735 104

KEHREN L 25 S - 8 cnc for sale
Surface Grinding Machines


GO vertical grinding machine - mod. L 25 S - 8 cnc / 1992 / loop length 2500 mm / grinding width 830 mm / workpiece height 400 mm / magnetic table 2500 x 800 mm / grinding motor 110-550 kW - rpm / segment head diameter  ...
used machine
 
GO vertical grinding machine - mod. L 25 S - 8 cnc / 1992 / loop length 2500 mm / grinding width 830 mm / workpiece height 400 mm / magnetic table 2500 x 800 mm / grinding motor 110-550 kW - rpm / segment head diameter 900 mm / segments 210 x 120 x 40 mm / cnc Siemens Sinumerik 3 G / grinding motor feed: 0,5 to 35 m / min -infinitely variable / coolant flow: 1000 l / min / coolant tank: 8000 lt / dresser with adjustable axle only for segment head / new SchleifmaÃ?e can be entered in the Sinumerik, which is then also the grinding head automatically to the required height adjust / good condition
Fe.gi.Maschinen.SBG.at

RETURN 25 S - 8 cnc surface grinding machine - vertical mod L / year 1992 / grinding length 2500 mm / grinding width 830 mm workpiece height 400 mm / magnetic table 2500 x 800 mm grinding motor 110-550 kW / segment head diameter 900 mm / step 210 x 120 x 40 mm / cnc Siemens S inumerik 3 G / grinding motor feed: 0.5 to 35 m / min - infinitely variable / coolant flow rate: 1000 l / min / coolant tank: 8000 lt / dresser with adjustment axis only for segment head / new grinding dimensions can be entered into Sinumerik, in which case the grinding head automatically adju STS to the appropriate height / good condition
Fe.gi.Maschinen.SBG.at
1992
Price  
    request
121632684 1401  

BITO Bito for sale
boltless shelv - 2.500x10.000x400mm - 200kg - Bito


Plug-in shelf - 2,500 x 10,000 x 400 mm - 60 shelves - specialist load 200 kg - Bito Here a very well preserved, used Bito plug-in shelf - is also shelving rack called - you offered. The plug-in shelf is the classic f ...
used machine
 
Plug-in shelf - 2,500 x 10,000 x 400 mm - 60 shelves - specialist load 200 kg - Bito

Here a very well preserved, used Bito plug-in shelf - is also shelving rack called - you offered. The plug-in shelf is the classic for use as a storage shelf or garage shelf in industry, production and shipping. The shelves can be used flexibly in close grid. To customize goods quickly and flexibly to the stored up the shelf, packages or workpieces. All rack of this rack fitted with side bars prevent falling out of the stored goods. Plug-in regiments are very fast, and to rebuild and a space-saving store.

We have both used and new condition stock other storage racks, pallet racks or high shelves and accessories. If you are interested, we look forward to your call.

We also recommend us as a supplier of complete storage and operating facilities. Request our printed catalogue.

Dimensions and loads:
-Shelf height approximately: 2,500 mm
-Shelf width approx.: 10,000 mm
-Shelf depth approx.: 400 mm
-Tray width approx.: 1,000 mm
-Load capacity: 200 kg .

under uniformly distributed load

Properties:
-Used, in very good condition
-Stand in blue, shelves, bright zinc-plated
-Mesh side panels prevent a falling out in the stands and disconnect the fan
-Shelves are degraded and available by arrangement, or ready for pickup.

Scope of delivery:
-1 Basic shelf and 9 mounting shelves with 6 floors consisting
-11 stands, approximately 2,500 mm, incl. feet
-60 shelves, bright zinc-plated
-5 clamping crosses, galvanised, including cam locks .
-4 stable trade floor pads per floor

Each clamping cross consists of two bars and four clamping locks.
All information without guarantee.

This is only a sample offer. From this material, we have over 6.794 shelf metres in stock. With pleasure we create an individual offer. We are looking forward to your call.

Dimensions and loads (approx.):

Height: 2,500 mm
Width: 10000 mm
Depth: 400 mm
Compartment width: 1,000 mm
Load capacity: 200 kg

Data:

Condition: Used, very good stand: Blue shelves: included with galvanized:

Basic shelves/cultivation racks: 1/9 PCs.
Stand: 11 PCs.
Shelves: 60 PCs.
Clamping crosses: 5 PCs.
Mounting hardware: incl.


You can pick up this article by appointment at our warehouse in Krefeld, Germany. Of course, we deliver you the articles also in the House. To do this we will create an offer you. Please have understanding that we can call you free shipping without the zip code of your delivery address. We cooperate with several carriers, which operate different routes. Your advantage: We can gain the best transport price for you. Please contact them before you buy.
 
605 €  
    request
121632676 1402

DÜRRKOPP Type Hängeförderer for sale
FASHION HANGING GOODS WAREHOUSE


The three-Storyed suspension goods storage rack is a Trolleyanlage for 20,000 parts per level. Total capacity 60.000 parts. Dürrkopp is the manufacturer of the system. Type suspension conveyor. I ...
used machine
 
The three-Storyed suspension goods storage rack is a Trolleyanlage for 20,000 parts per level.
Total capacity 60.000 parts.
Dürrkopp is the manufacturer of the system. Type suspension conveyor.
It's a manual system.

Specs: thigh measurement: ca 1100 x 4550 mm floor height: ca: 2500 mm Division: 21 shelf rows to 7500 mm length, of which 19 double and 2 single shelf lines.
Mounted version: 21 stock gears with an aisle width of 800 mm per warehouse floor buying shelving for flat packed goods are slope 3-tier 600lfm Abhöngerohr of Furthermore charges possible.

Price does not include installation. Plant is disassembled and can also be supplied at an additional cost.
2010
39,500 €  
    request
121632630 709

SOREN diverse for sale
dough-making line


Plant was only for test purposes in operation! Production as well as cooling down and ventilation of masses. performance: approx. 1200 kg/h Condition: like new Inspection: by appointment Composition: Flour =  ...
used machine
 
Plant was only for test purposes in operation!

Production as well as cooling down and ventilation of masses.

performance: approx. 1200 kg/h
Condition: like new
Inspection: by appointment

Composition:
Flour = 30-40%
Water = 60- 70%

inlet temperature: + 30 ° C
outlet temperature: + 4 °
outlet density: approx. 400g/ltr.

Pos. 1
continuous mixer for masses
- Capacity max. 1,200 kg/h
- Base frame made of tubular stainless steel construction with bottom-mounted, height-adjustable machine feets
- Product receiving hopper for receiving continuously supplied dough components
- Dosing screw AE = 90mm made of stainless steel AISI 316 for the supply of dry components, driven by frequency controlled 0.75 kW three-phase current geared motor with adjustable speed
- additional connection flange for continual feeding of the liquid components

1 piece double-walled mixing cylinder made of stainless steel AISI 316, with integrated horizontal stainless steel mixing shaft, driven by frequency-controlled 4 kW three-phase current geared motor with adjustable speed

2 pieces flushing connections for circulation of a heating cooling medium
- Product outlet opening with connection piping to the following intermediate tank
- Connecting flange for connection to a customer supplied CIP cleaning system
- Connecting piping for connection of the individual components

1 piece stainless intermediate container 100 ltr.
- positioned immediately next to the above-named continuous mixer
- Capacity approx. 100 liters
- built on tubular stainless steel frame with bottom-mounted, height-adjustable machine feets
- Limit switch secured, hinged container lid
- Connection fitting for product infeed on tank top
- built-up stirring tool for continuous product movement, driven by three-phase current geared motor with constant speed (25 rpm)
- integrated level monitoring via Liquiphant brand Endress + Hausser, type FTL 360
- Product outlet opening with 90 °C connecting piping to the replicating progressing cavity pump
- bottom-mounted manually operated stainless steel flap valve DN100

1 piece CSF eccentric screw pump for supplying the mass to the following scraped surface heat exchanger
- built on stainless steel base frame
- Rotor shaft made of stainless steel AISI 304, driven by frequency-controlled 2.2 kW three-phase current geared motor with adjustable speed
- Replaceable stator made of food-approved elastomers, version, adapted to the mass used
- integrated magnetic table inductive flow meter of the brand Endress + Hauser
- Control via subsequent scraping heat exchanger

1 piece stainless 2 compartment pipe filter system
- in detail consisting of:
- 2 pieces tubular stainless steel filter cartridges with removable tubular stainless steel filters
- Manually operated 3-way valve made of rust-free stainless steel for alternating operation of the filters
- Required connecting bore for connection to the piping system
- Mounting materials

2 pieces scraped surface heat exchangers SSHE Mod.HD 804
- product input temperature max 30 ° C
- product outlet temperature min + 4 ° C
- Product cylinder made of stainless steel AISI316L
- Wiper blade made of stainless steel AISI316L
- Blade made of stainless steel AISI316L
- each powered by 15 kW electric geared motor with constant speed
- insulation by means of mineral wool
- Outer cylinder made of stainless steel AISI316L
- refrigerant glycol,
Temperature range -12 ° C,
Flow rate up to 12,000 Ltr./h

2 piesces glycol water control systems with modulating 3-way control valves
each consisting of:
- 3 pieces stainless steel ball valves 1 1/4 "
DN 40
- 1 pc. GEMÜ water valve
- 1 pc. GEMÜ limit switch
- 1 pc. Solenoid valve
- 1 pc. SAMSON 3-way valve DN 40
to -50 ° C
- 1 piece Transmitter
- 2 pieces Thermometers
- 1 piece pressure gauge 0-10 bar for water
- 1 piece safety valve
- 1 piece piping system incl.
Flange parts, fastening material etc., piping
electrically welded and polished inside
Glands executed acc. DIN 11851

1 piece flow rate measuring system
- brand Endress + Hauser
- Type Promag 53H, DN 40

1 piece air dosing system
complete including air flow measuring system

1 piece stainless steel cabinet to hold all necessary load controls
in detail consisting of:
- Dimensions (WxHxD): 1200 x 900 x 300 mm
- Degree of protection IP65 outside, IP20 inside
- Integrated main switch as well
Motor protection switches, motor contactors, transformers and
voltage monitoring
- Automation via Simens S7-300
including the required signal conditioning instruments,
analog and digital input and output cards
- Operation via Siemens color touch panel type MP277, integrated in the control cabinet door
- complete including Programming, circuit diagram creation, operating and maintenance instructions
2013
Price  
    request
121615014 1407

Pallet roller conveyor 1, 4 m & 0, 8 m long


<b>Properties:</b> Used pallet roller conveyor Material: Stainless steel powered Color: Silver Expertly disassembled and packed Modular system for the conveying of Euro pallets Each module has a SEW  ...
used machine
 
<b>Properties:</b>

Used pallet roller conveyor
Material: Stainless steel
powered
Color: Silver
Expertly disassembled and packed
Modular system for the conveying of Euro pallets
Each module has a SEW drive

<b>Technical data

Pallet roller conveyor dimensions approx.</b>
Overall lengths in mm: 8 PCs. x 1.430 and 2 PCs. x 840
Total width: 980 mm
Clamping length approx.: 880 mm
Length: 145mm
Rolling cross sectional area: 90 mm

<b>Pallet roller conveyor</b>

Thanks to the superb craftsmanship of the pallet roller conveyor glides your material, even under high load, gently to the place of destination.

<b>Tailor-made solutions for your intralogistics</b>

We are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! Gladly we will create you an individual offer or advise on the design or Assembly questions. Just let your needs and local conditions us to.

Take advantage of our many years of experience and our excellent network of professionals. For companies of various industries, such as: logistics, pharmaceutical industry, crafts or the electronics industry we have already successfully implemented projects.

Together, we will work out ways to optimize your process and material flow cost effectively and sustainably. We can offer you even fully automatic sorting equipment or additional components such as picking racks or containers.
 
Price  
    request
121615012 1406

BENIER for sale
Belt conveyors, Hohlkehlband different lengths


<B>Properties:</B> Used conveyor separately to order feet Motor available Condition: fully functional with traces of use Ideal for fast material handling Expertly disassembled and packed Color: Silver ...
used machine
 
<B>Properties:</B>

Used conveyor separately to order feet
Motor available
Condition: fully functional with traces of use
Ideal for fast material handling
Expertly disassembled and packed
Color: Silver

<b>Belt conveyors</b>

The belt conveyor is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. Transportation can foster the belt conveyor sensitive and different-sized containers, boxes or other packaging and article units to the task or delivery point and, for example, also serves as a connecting route before or between production and Woodworking machines. Also enables efficient parts in operating and storage and is designed to promote significant flow rates and distances.

<b>Technical data:

Mass of goods conveyor</b>
Overall lengths in mm: 6 PCs. x 1,720, 1 PCs. x 4,250, 1 PCs. x 4,000, 1 PCs. x 2.530
Total width: 420 mm
Belt width: 300 mm
Roll diameter: 80 mm
Profile: 125 H
Chain case: 460 x 270 mm
Width of the motor: 590mm
Engine 250mm above the upper edge of band

<b>Tailor-made solutions for your intralogistics</b>

We are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! Gladly we will create you an individual offer or advise on the design or Assembly questions. Just let your needs and local conditions us to.

Take advantage of our many years of experience and our excellent network of professionals. For companies of various industries, such as: logistics, pharmaceutical industry, crafts or the electronics industry we have already successfully implemented projects.

Together, we will work out ways to optimize your process and material flow cost effectively and sustainably. We can offer you even fully automatic sorting equipment or additional components such as picking racks or containers.
1999
Price  
    request
121615006 1402

KAINZ for sale
Chain conveyor lengths


<b>Properties:</b> Used chain conveyors Manufacturer: K Drive: SEW Color: grey Expertly disassembled and packed <b>Technical data Dimensions approx.</b> Total width: 560 mm length in ...
used machine
 
<b>Properties:</b>

Used chain conveyors
Manufacturer: K
Drive: SEW
Color: grey
Expertly disassembled and packed

<b>Technical data

Dimensions approx.</b>
Total width: 560 mm length in mm: 3 PCs. x 1780, 2 PCs. x 2530, 3 x 8880(zerlegt in 2 Teile: 3.600 und 5.280), 1 x 1580, 6 PCs. x 2850, profiles: 135 H
Material: Aluminium

<b>Tailor-made solutions for your intralogistics</b>

We are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! Gladly we will create you an individual offer or advise on the design or Assembly questions. Just let your needs and local conditions us to.

Take advantage of our many years of experience and our excellent network of professionals. For companies of various industries, such as: logistics, pharmaceutical industry, crafts or the electronics industry we have already successfully implemented projects.

Together, we will work out ways to optimize your process and material flow cost effectively and sustainably. We can offer you even fully automatic sorting equipment or additional components such as picking racks or containers.
 
Price  
    request
121614998 1402

Not driven pallet roller conveyor narrow


<b>Properties:</b> Used pallet roller conveyor Color: grey Expertly disassembled and packed narrow, not powered with steel rollers in L <b>Technical data Pallet roller conveyor dimensions a ...
used machine
 
<b>Properties:</b>

Used pallet roller conveyor
Color: grey
Expertly disassembled and packed
narrow, not powered
with steel rollers in L

<b>Technical data

Pallet roller conveyor dimensions approx.</b>
Overall length: 1,350 mm
Total width: 175 mm
Clamping length approx.: 95 mm
Role width: 85mm
Conveying height: 80 mm
Length: 130mm
Rolling cross section: 60 mm
Profiles: 70x40mm
Material: Steel

<b>Pallet roller conveyor</b>

Thanks to the superb craftsmanship of the pallet roller conveyor glides your material, even under high load, gently to the place of destination.

<b>Tailor-made solutions for your intralogistics</b>

We are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! Gladly we will create you an individual offer or advise on the design or Assembly questions. Just let your needs and local conditions us to.

Take advantage of our many years of experience and our excellent network of professionals. For companies of various industries, such as: logistics, pharmaceutical industry, crafts or the electronics industry we have already successfully implemented projects.

Together, we will work out ways to optimize your process and material flow cost effectively and sustainably. We can offer you even fully automatic sorting equipment or additional components such as picking racks or containers.
 
Price  
    request
121614996 1407

Pallet roller conveyor 1 and 5 m 2, 3 m long


<b>Properties:</b> Used pallet roller conveyor Material: Steel (galvanized) Color: Blue Expertly disassembled and packed Modular system for the conveying of europallets in 2 lengths Each module has a  ...
used machine
 
<b>Properties:</b>

Used pallet roller conveyor
Material: Steel (galvanized)
Color: Blue
Expertly disassembled and packed
Modular system for the conveying of europallets in 2 lengths
Each module has a SEW drive (0,55 kw)
The roles are by the manufacturer Tecnorulli
Is driven by a duplex chain

<b>Technical data

Pallet roller conveyor dimensions approx.</b>
Overall length: 13 PCs. x 1, 5 m and 7 PCs. x 2, 3 m
Total width: 1,055 mm
Clamping length approx.: 925 mm
Length: 200mm
Rolling cross sectional area: 90 mm
Material: Steel
Profile: 125 H

<b>Pallet roller conveyor</b>

Thanks to the superb craftsmanship of the pallet roller conveyor glides your material, even under high load, gently to the place of destination.

<b>Tailor-made solutions for your intralogistics</b>

We are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! Gladly we will create you an individual offer or advise on the design or Assembly questions. Just let your needs and local conditions us to.

Take advantage of our many years of experience and our excellent network of professionals. For companies of various industries, such as: logistics, pharmaceutical industry, crafts or the electronics industry we have already successfully implemented projects.

Together, we will work out ways to optimize your process and material flow cost effectively and sustainably. We can offer you even fully automatic sorting equipment or additional components such as picking racks or containers.
 
Price  
    request
121614989 1407

Pallet roller conveyor, conveyor technology, conveyor


<b>Properties:</b> Used pallet roller conveyor Color: grey Expertly disassembled and packed narrow, not powered with riveted Interroll rollers in U-profiles <b>Technical data Pallet roller  ...
used machine
 
<b>Properties:</b>

Used pallet roller conveyor
Color: grey
Expertly disassembled and packed
narrow, not powered
with riveted Interroll rollers in U-profiles

<b>Technical data

Pallet roller conveyor dimensions approx.</b>
Overall length: 1,470 mm
Total width: 175 mm
Clamping length approximately: 97 mm
Role width: 85mm
Conveying height: 80 mm
Length: 130mm
Rolling cross section: 60 mm
Profiles: 70x60mm
Material: Steel

<b>Pallet roller conveyor</b>

Thanks to the superb craftsmanship of the pallet roller conveyor glides your material, even under high load, gently to the place of destination.

<b>Tailor-made solutions for your intralogistics</b>

We are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! Gladly we will create you an individual offer or advise on the design or Assembly questions. Just let your needs and local conditions us to.

Take advantage of our many years of experience and our excellent network of professionals. For companies of various industries, such as: logistics, pharmaceutical industry, crafts or the electronics industry we have already successfully implemented projects.

Together, we will work out ways to optimize your process and material flow cost effectively and sustainably. We can offer you even fully automatic sorting equipment or additional components such as picking racks or containers.
 
Price  
    request
121614977 1407

Pallet roller conveyor, conveyor technology, conveyor


<b>Properties: </b> Used pallet roller conveyor narrow, not powered Color: Silver Expertly disassembled and packed With a drag reel by rail, 30 PCs per pallet Drag Reel: 100 B x 90 diameter Braking ro ...
used machine
 
<b>Properties:
</b>
Used pallet roller conveyor
narrow, not powered
Color: Silver
Expertly disassembled and packed
With a drag reel by rail, 30 PCs per pallet
Drag Reel: 100 B x 90 diameter
Braking roller protrudes below

<b>Technical data

Pallet roller conveyor dimensions approx.</b>
Overall length: 1250 mm
Total width: 230/155 mm
Clamping length approx.: 150 mm
Length: 155mm
Rolling cross section: 60 mm
Profiles: 70 x 38mm
Material: Steel

<b>Pallet roller conveyor</b>

Thanks to the superb craftsmanship of the pallet roller conveyor glides your material, even under high load, gently to the place of destination.

<b>Tailor-made solutions for your intralogistics</b>

We are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! Gladly we will create you an individual offer or advise on the design or Assembly questions. Just let your needs and local conditions us to.

Take advantage of our many years of experience and our excellent network of professionals. For companies of various industries, such as: logistics, pharmaceutical industry, crafts or the electronics industry we have already successfully implemented projects.

Together, we will work out ways to optimize your process and material flow cost effectively and sustainably. We can offer you even fully automatic sorting equipment or additional components such as picking racks or containers.
 
Price  
    request
121614971 1407

Pallet roller conveyor, conveyor technology, conveyor


<b>Properties:</b> Used pallet roller conveyor Material: Steel (galvanized) Color: orange Expertly disassembled and packed Modular system for the conveying of Euro pallets 3 drives are available with  ...

 
<b>Properties:</b>

Used pallet roller conveyor
Material: Steel (galvanized)
Color: orange
Expertly disassembled and packed
Modular system for the conveying of Euro pallets
3 drives are available with subsets from: 23 x 1,575 mm, 1 piece x 1.805 mm mm, 1 piece x 2.140 mm, 1 piece x 2.700 mm, and a gas train / 700 mm with motor.

<b>Technical data

Pallet roller conveyor dimensions approx.</b>
Total width: 1,000 mm
Clamping length approx.: 908 mm
Length: 225mm
Rolling cross section: 100 mm
Material: Steel
Profiles: 175 x 80 & L profile 165 x 65

<b>Pallet roller conveyor</b>

Thanks to the superb craftsmanship of the pallet roller conveyor glides your material, even under high load, gently to the place of destination.

<b>Tailor-made solutions for your intralogistics</b>

We are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unloading of goods! Gladly we will create you an individual offer or advise on the design or Assembly questions. Just let your needs and local conditions us to.

Take advantage of our many years of experience and our excellent network of professionals. For companies of various industries, such as: logistics, pharmaceutical industry, crafts or the electronics industry we have already successfully implemented projects.

Together, we will work out ways to optimize your process and material flow cost effectively and sustainably. We can offer you even fully automatic sorting equipment or additional components such as picking racks or containers.
 
Price  
    request
121614958 107

FLOW WMC-2-DWJ 3060-TC 2P-100ID for sale
Water Jet Cutting Machines


Water jet cutting machine Manufacturer: Flow Type: WMC-2-DWJ 3060-TC 2P-100ID Year of construction: 2010 CNC control 5-axis system Cutting area: 3,000 x 6,000 mm 2 cutting heads Master head cutting range: X-axi ...
used machine
 
Water jet cutting machine
Manufacturer: Flow
Type: WMC-2-DWJ 3060-TC 2P-100ID
Year of construction: 2010
CNC control

5-axis system
Cutting area: 3,000 x 6,000 mm
2 cutting heads
Master head cutting range: X-axis: 3100 mm / y axis: 6100 mm
Cutting area slave head: X-axis: 2600 mm / y axis: 6000 mm
Z axis stroke: 200 mm
Maximum workpiece height: 175 mm

Software:
Flow master CAM
Flow cut
Flow path
Flow code

Machine is disassembled and cleaned!

2010
Price  
    request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Find used machinery dealers in your country