storage room used for sale

For powder or liquid d. 1800 Height on photos Drain diameter 215 mm Flange diameter 340 / 8 holes on d.290 Off-centre conical bottom 4 feet on gussets

3 lanes pallet storage, roller width: (3x) 850 mm, total dimensions: 2800 mm x 1900 mm x 2420 mm.

Quantity available: 5 Capacity : 35 L Weight : 27 Kg Material : stainless steel 316L Mobility : 3 wheels with locks. Operating pressure : atmospheric Closing lid Outlet valve : diameter 20 mm

Used cold room with storage freezer LILLNORD, type: Combirum C225-600 -In bakery condition- Refrigerator K 225-165 -10°C / +43°C - For 4 to 6 rack trolleys Storage freezer / fermentation interrupter TF 225-435 - 0° / -20°C - for 18 rack trolleys Assembly on request Condition: Very good, ready for immediate use Inspection and test run are possible by arrangement.

Multifunctional punch, punch, hole punch, pneumatic hole punch -operated: pneumatic -Year of construction: 1999 -Dimensions: 600/600/H1300 mm -Weight: 50 kg

Multifunctional punch, punch, hole punch, pneumatic hole punch -pneumatically operated -Year of construction: 1996

Multifunctional punch, punch, hole punch, pneumatic hole punch -Manufacturer: Tekna -Type: TK280 HU3 -Matr.: 109 -COD.: Z994 598 88A340 -pneumatic: operated -Piston stroke: 20 mm -Pressure capacity: 29.42 kN -Nominal pressure: 6/7 bar -Foot switch -Year of construction: 2012 -Dimensions: 565/600/H1050 mm -Weight: 71 kg

Description: Conference table 3250 x 800 mm, 8 chairs, mobile flip chart, whiteboard, SAMSUNG flat-screen TV with remote control, TERRA PC with mouse and keyboard Approx. Onsite Dimension. (l x w x h): 4,000 x 1,500 x 1,000 mm, weight approx.: 200 kg

We offer 4 system rooms with L-shaped ceiling Basic dimensions: 
 Room 1: 2,750 m x 5,015 m; H = 2,880 mm, left H = 2,705 mm, Room 2: 9,300 m x 4,910 m; H = 2,880 mm, left H = 2,705 mm, 
 Room 3: 5,000 m x 4,551 m; H = 2,880 mm, left H = 2,705 mm, Room 4: 5,000 m x 4,551 m; H = 2,880 mm, left H = 2,705 mm. The walls are made of double-skinned, powder-coated sheet steel filled with mineral wool, equipped with 6 mm float glass. They offer a sound insulation of approx. 25 dB at 1,000 Hz and are also partly equipped with air slots for an air passage of 300 cubic meters/hour. The surface is powder-coated. The ceiling is a sheet steel cassette ceiling (distance DTR = approx. 1,018 mm) made of perforated cassettes, surface powder-coated, grid 625 x 625 mm, cassettes clamped, profile rails not visible. Thermal and acoustic insulation by 35 mm mineral wool, highly compacted, alu ...

Storage tank storage tanks of liquid fertilizer AHL / ASL tank - containers - fertilizer warehouse 1. used storage containers AHL tank ASL tank liquid fertilizer tank 30,000 litres. The tank complies with the DIN of 6616, owns 2 caliper feet, is empty inside and out and cleaned, incl. ladder. D = 2.50 m - L = approx. 6.80 m. The container receives incl. leak detector in the protection box mounted a new plastic inner sleeve - resistant storage of liquid fertilizer -. The plastic inner sleeve has a "General Building Inspectorate approval" Z-65.30-466 and makes suitable and approved for the storage of liquid fertilizer AHL as well as NOx reduction agent AUS 32 (AdBlue). The price is ex-works - free charged.

Various plastic boxes with various dimensions, used Unit price € 3,36 net plus 19 % VAT from stock 21698 Harsefeld. Price only valid while stocks last. Errors and omissions excepted. We are a commercial provider – VAT invoice.

1. Cleanroom incl. ventilation technology a Manufacturer: REUKO Klima-Service GmbH & Co. KG b. Type: individual solution c. Date build: 2012 d. Use: idle operation for several months, reconstitution of medicinal products in 2 clinical trials (including cytostatics) e. Clean Room Classes: D (for Isolator environment) f. Area/rooms: Slice and laboratory (with separate air lock for goods) g. Control: Individual solution by ELREST (DDC-Controller) 2. Insulator a. Manufacturer: Envair Deutschland GmbH b. Type: CDC F 2G2D (2-Hand, Isolator clean room class A) c. Build: 06. 2012 d. Use: Reconstitution during 2 clinical trials (including cytostatics); idle operation for several months e. Details: isokinetic measuring probe, 3. Particle Analyzer a. Manufacturer: KM-Optoelektronik b. Type: PCSS c. Date build: 2010

2 pcs available can also be used for other rooms of the food industry Dimensions: Also single for sale per piece 500,00 Euro

SMEVA 48 M2 Product number:M18-7071 Cooling capacity:0,001 kW Dimensions:8000 x 6000 x 2480 mm Number in stock:1 piece(s) Price:Quotation request Very nice Smeva cold room of 48 m2, two entrance doors, 5 drawer kabinets and 10 glass doors (5 frames). Visit also our website: used-refrigeration

SMEVA 27 M2 Product number:M18-7070 Cooling capacity:0.001 kW Dimensions:9000 x 3000 x 2780 mm Number in stock:1 piece(s) Price:Quotation request Very nice Smeva cold store with two rooms (15 m2 and 12 m2), an entrance door per room and 10 glass doors (4 frames). Visit also our website: used-refrigeration

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Spindle speeds: number (steps): 12 from: 45 rpm up to: 2800 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 HP Machine´s weight about: 250 kg Overall dimensions machine: Length: 1200 mm Width: 700 mm Height: 500 mm Various accessories: On work bench: Working bench: Length: 1600 mm Width: 700 mm Height: 850 mm Rear drive: SIMONET Headstock with reduction gear Driving plate Set of collets: W20

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 190 mm Distance between centres: 750 mm Swing over cross-slide: 240 mm Swing over bed: 390 mm Swing in gap: 580 mm Spindle hole: 54 mm Taper in spindelstock MK: 4 Taper in spindle: Camlock: 6" D1 Spindle speeds: number (steps): 16 from: 25 rpm up to: 2000 rpm Taper in tailstock:: 4 MT Spindle stroke: 155 mm Feeds: length: from: 0.04 mm/r up to: 1 mm/r Frontal: from: 0.02 mm/r up to: 0.5 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 7.5 HP Machine´s weight about: 1170 kg Overall dimensions machine: Length: 2000 mm Width: 1000 mm Height: 1500 mm Various accessories: Digital readout number of axis: Manufacturer: HEIDENHAIN Face plate diameter: 380 mm 3-jaw chuck diameter: 200 mm Set of jaws hard Set of jaws Coolant system Quick closing attachment Chuck adaptor Fixed s ...

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 260 mm Distance between centres: 2000 mm Swing over cross-slide: 340 mm Swing over bed: 520 mm Swing in gap: 620 mm Length of the gap: 145 mm Workpiece weight on centres max.: 760 kg Spindle hole: 42 mm Taper in spindelstock metric: 50 Taper in spindle: Camlock: D6" Spindle speeds: number (steps): 13 from: 20 rpm up to: 1800 rpm Pitch of leadscrew: 6 mm Steep thread transmission: 6:1 Taper in tailstock:: 5 MT Spindle diameter: 80 mm Spindle stroke: 200 mm Feeds: length: from: 0.045 mm/r up to: 2.52 mm/r Frontal: from: 0.003 mm/r up to: 1.75 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 15 HP Machine´s weight about: 2500 kg Overall dimensions machine: Length: 3740 mm Width: 1300 mm Height: 1600 mm Various accessories: Face plate diameter: 550 mm 3-jaw chuck diameter ...

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle speeds: stepless from: 45 rpm up to: 3100 rpm Step-down gear: 1:5 Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 / 0.9 kW Machine´s weight about: 300 kg Overall dimensions machine: Length: 2000 mm Width: 800 mm Height: 1400 mm Various accessories: Working bench: Length: 2000 mm Width: 800 mm Height: 900 mm Rear drive Drawer(s) Headstock with reduction gear 3-jaw chuck diameter: 110 mm 3-jaw chuck diameter: 110 mm 4-jaw chuck diameter: 110 mm Driving plate Macnetic chuck diameter: 100 mm Set of collets Drilling tailstock Hand rest Cross slide CNC

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 25 W Taper spindle threaded Spindle speeds: number (steps): 12 from: 40 rpm Taper in tailstock:: 2 MT longitudinal: Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Total power required: 2.0 HP Machine´s weight about: 500 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1300 mm Various accessories: Knee-operated reversing switch Clutch and brake Lamp Quick closing attachment Chip protector Toolholders

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: W25 number (steps): 12 from: 45 rpm up to: 2800 rpm Taper in tailstock:: 2 MT Feeds: Voltage 50 Hz 3x: 380 Volt Overall dimensions machine: Length: 2200 mm Width: 800 mm Height: 1650 mm Various accessories: On work bench: Working bench: Length: 2150 mm Width: 770 mm Height: 900 mm Driving system for milling and grinding attachment 3-jaw chuck diameter: 100 mm Set of jaws hard Drilling tailstock Chip protector

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 675 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: number (steps): 6 from: 270 rpm up to: 2800 rpm Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 HP Machine´s weight about: 150 kg Overall dimensions machine: Length: 2000 mm Width: 700 mm Height: 1500 mm Various accessories: Working bench: Length: 2660 mm Width: 770 mm Height: 900 mm Rear drive Foot switch Drawer(s) Belt-tensioning device for milling/grinding att. Drilling tailstock Drill chuck

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: number (steps): 12 from: 40 rpm up to: 3000 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Total power required: 2.0 HP Machine´s weight about: 500 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1300 mm Various accessories: Base-mounted type: Driving system for milling and grinding attachment Belt-tensioning device for milling/grinding att. Quick closing attachment Drill chuck Turret carriage

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 70 mm Distance between centres: 315 mm Swing over cross-slide: 85 mm Swing over bed: 155 mm Spindle hole: 12 mm Spindle speeds: number (steps): 12 from: 135 rpm up to: 2500 rpm Machine´s weight about: 150 kg Overall dimensions machine: Length: 1200 mm Width: 800 mm Height: 1500 mm Various accessories: Sheet metal base Rear drive Lamp Belt-tensioning device for milling/grinding att. 3-jaw chuck diameter Set of jaws hard Set of collets Drilling tailstock Rotary centre Set of centres Drill chuck Hand rest

Size: 80cm wide and 180cm high Price on request Contact details can be found under Contact

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 450 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 20 mm Spindel nose for collets: W 20 Taper in spindle: Threaded Spindle speeds: number (steps): 24 from: 45 rpm up to: 3100 rpm Pitch of leadscrew: 4 mm Diameter of leadscrew: 40 mm Taper in tailstock:: 2 MT Feeds: number (steps): 8 length: from: 0.020 mm/r up to: 0.30 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.50 HP Machine´s weight about: 550 kg Overall dimensions machine: Length: 1375 mm Width: 670 mm Height: 1210 mm Various accessories: 3-jaw chuck Quick closing attachment Quick change tool: MULTIFIX Set of collets: W 20 Tool holder with elements Lamp Drilling tailstock Clutch and brake 2 drawers

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: number (steps): 12 from: 40 rpm up to: 3000 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Total power required: 2.0 HP Machine´s weight about: 500 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1300 mm Various accessories: Base-mounted type: Knee-operated reversing switch Driving system for milling and grinding attachment Belt-tensioning device for milling/grinding att. Drilling tailstock

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: number (steps): 12 from: 40 rpm up to: 3000 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Total power required: 2.0 HP Machine´s weight about: 500 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1300 mm Various accessories: Base-mounted type: Knee-operated reversing switch Driving system for milling and grinding attachment Belt-tensioning device for milling/grinding att. Drilling tailstock

Base area: 3000mm x 3600mm Height: 3180mm Wall thickness: 90mm No door!

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 25 mm Inner taper type: 25 W Taper spindle threaded Spindle speeds: stepless from: 55 rpm up to: 3000 rpm Taper in tailstock:: W20 Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Machine´s weight about: 550 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1400 mm Various accessories: Base-mounted type: Knee-operated reversing switch Driving system for milling and grinding attachment Belt-tensioning device for milling/grinding att. Grinding attachment for collets B8 Wheel arbors 3-jaw chuck diameter: 100 mm 3-jaw chuck diameter: 100 mm Set of jaws hard Face plate diameter: 200 mm Driving plate Set of collets Set bell collets Tailstock ...

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Spindle speeds: number (steps): 12 from: 45 rpm up to: 2800 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 HP Machine´s weight about: 300 kg Overall dimensions machine: Length: 1200 mm Width: 700 mm Height: 1500 mm Various accessories: Base-mounted type: Belt-tensioning device for milling/grinding att. 4-jaw chuck diameter Quick closing attachment Drill chuck Hand rest Fixed steady

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 150 mm Distance between centres: 600 mm Swing over cross-slide: 177 mm Swing over bed: 340 mm Swing in gap Spindle hole: 40 mm Taper in spindelstock MK: 5 Taper in spindle: Camlock: D 1-4" Spindle speeds: stepless from: 55 rpm up to: 3000 rpm Taper in tailstock:: 5 MT Spindle diameter: 60 mm Feeds: number (steps): 48 length: from: 0.015 mm/r up to: 0.35 mm/r Frontal: from: 0.015 mm/r up to: 0.35 mm/r Rapid motion: 4 m/min Voltage 50 Hz 3x: 380 Volt Spindle motor: 2.70 HP Total power required: 6.30 HP Machine´s weight about: 1250 kg Overall dimensions machine: Length: 1730 mm Width: 970 mm Height: 1300 mm Various accessories: 3-jaw chuck diameter Coolant system Quick closing attachment Set of steel holders Lamp Drilling tailstock

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Spindle speeds: number (steps): 12 from: 45 rpm up to: 2800 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 HP Machine´s weight about: 300 kg Overall dimensions machine: Length: 2000 mm Width: 900 mm Height: 1500 mm Various accessories: Working bench: Length: 2000 mm Width: 1000 mm Height: 900 mm Rear drive Pneum. quick closing attach. Milling attachment Cross slide CNC: COMBITEC E-600

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Spindle speeds: number (steps): 12 from: 45 rpm up to: 2800 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 HP Machine´s weight about: 300 kg Overall dimensions machine: Length: 2000 mm Width: 900 mm Height: 1500 mm Various accessories: Working bench: Length: 2000 mm Width: 1000 mm Height: 900 mm Rear drive Pneum. quick closing attach. Cross slide CNC: COMBITEC E-600

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 450 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 20 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: stepless from: 210 rpm up to: 3000 rpm Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Total power required: 2.0 HP Machine´s weight about: 200 kg Overall dimensions machine: Length: 2500 mm Width: 800 mm Height: 1300 mm Various accessories: Working bench: Length: 2000 mm Width: 700 mm Height: 900 mm Driving plate Drilling tailstock Drill chuck Fixed steady

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: number (steps): 12 from: 40 rpm up to: 3000 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Total power required: 2.0 HP Machine´s weight about: 500 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1300 mm Various accessories: Speed potentiometer 2 drawers

Technical data Centre height: 102 mm Distance between centres: 350 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 20.0 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: stepless from: 55 rpm up to: 3000 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Total power required: 2.0 HP Machine´s weight about: 500 kg Overall dimensions machine: Length: 1300 mm Width: 600 mm Height: 1300 mm Various accessories: pedal-operadet reversing switch 2 drawers Stepless speed variator Coolant system Lamp Headstock with reduction gear Quick closing attachment Cross slide with 90 mm stroke

Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 20.0 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: stepless from: 45 rpm up to: 3000 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Machine´s weight about: 550 kg Overall dimensions machine: Length: 1200 mm Width: 700 mm Height: 1400 mm Various accessories: Base-mounted type:: 102-82.000 2 drawers Stepless speed variator Headstock with reduction gear Driving plate Adjustable tailstock Drill chuck Cross slide with 90 mm stroke Fixed steady

Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 20 mm Inner taper type: 20 W Spindle speeds: number (steps): 24 from: 58 rpm up to: 2900 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.7 HP Machine´s weight about: 400 kg Overall dimensions machine: Length: 2000 mm Width: 800 mm Height: 1500 mm Various accessories: On work bench: Working bench: Length: 2000 mm Width: 800 mm Height: 900 mm Rear drive 3-jaw chuck diameter: 120 mm Set of collets: W 20 Set of centres Drill chuck Grinding attachment Fixed steady

Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 45 mm Inner taper type: 38 F Taper spindle threaded Spindle speeds: stepless from: 90 rpm up to: 2600 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Machine´s weight about: 550 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1400 mm Various accessories: Base-mounted type: pedal-operadet reversing switch Coolant system 3-jaw chuck diameter: 100 mm Quick closing attachment Drilling tailstock Lever operated cross slide

Technical data Centre height: 102 mm Distance between centres: 300 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 20 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: stepless from: 55 rpm up to: 3000 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Machine´s weight about: 450 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1400 mm Various accessories: Base-mounted type: Knee-operated reversing switch 2 drawers Stepless speed variator Driving system for milling and grinding attachment Belt-tensioning device for milling/grinding att. Headstock with reduction gear Set of collets: W 20 Drilling tailstock Cross slide with 90 mm stroke

Fermentation room WP GRF for 6 wagons -WP fermentation room for 6 Stikkenwagen or also for 2 puller wagons -Built in 2008 -double door

Key data: 102 , 450 , 22

Center height: 102 mm Center distance: 450 mm Spindle bore: 22 mm Technical data Centre height: 102 mm Distance between centres: 450 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 22.0 mm Inner taper type: 27 F Taper spindle threaded Spindle speeds: from: 90 rpm up to: 2600 rpm Voltage 50 Hz 3x: 380 Volt Overall dimensions machine: Length: 1400 mm Width: 60 mm Height: 1250 mm Various accessories: Base-mounted type: Clutch and brake

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 470 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Bar passage: 14.5 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: stepless from: 100 rpm up to: 6000 rpm Cross slide: cross travel (x axis): 100 mm Longitudinal travel (X-axis): 90 mm Taper in tailstock:: 2 MT Spindle diameter: 30 mm Spindle stroke: 80 mm Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 kW Machine´s weight about: 360 kg Overall dimensions machine: Length: 2000 mm Width: 800 mm Height: 1370 mm

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 470 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 25 mm Bar passage: 19 mm Inner taper type: 25 W Taper spindle threaded Spindle speeds: stepless from: 100 rpm up to: 6000 rpm Cross slide: cross travel (x axis): 100 mm Longitudinal travel (X-axis): 90 mm Taper in tailstock:: 2 MT Spindle diameter: 30 mm Spindle stroke: 80 mm Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 kW Machine´s weight about: 360 kg Overall dimensions machine: Length: 2000 mm Width: 800 mm Height: 1370 mm

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 470 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 20.0 mm Inner taper type: 20 W Taper spindle threaded Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 500 kg Overall dimensions machine: Length: 1300 mm Width: 600 mm Height: 1300 mm Various accessories: Base-mounted type: Knee-operated reversing switch 2 drawers Driving plate Cross slide with 90 mm stroke Hand rest

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 170 mm Distance between centres: 650 mm Swing over cross-slide: 196 mm Swing over bed: 350 mm Swing in gap: 535 mm Length of the gap: 165 mm Spindle hole: 42 mm Spindel nose for collets Taper in spindelstock MK: 3 Taper in spindle:: D1-4" Camlock Spindle speeds: number (steps): 3 stepless from: 15 rpm up to: 3250 rpm Pitch of leadscrew: 6 mm Diameter of leadscrew: 32 mm Cross slide: Longitudinal way: 140 mm Transversal way: 250 mm Taper in tailstock:: 4 MT Spindle diameter: 63 mm Spindle stroke: 140 mm Feeds: number (steps) length: from: 0.036 mm/r up to: 1.2 mm/r Frontal: from: 0.012 mm/r up to: 0.6 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 7.5 kW Total power required Machine´s weight about: 1350 kg Overall dimensions machine: Length: 1900 mm Width: 1100 mm He ...

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Machine´s weight about: 500 kg Overall dimensions machine: Length: 1200 mm Width: 700 mm Height: 500 mm Various accessories: Base-mounted type: Knee-operated reversing switch 2 drawers Drawer(s) Stepless speed variator Cross slide with 90 mm stroke Hand rest

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 450 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 25.0 mm Inner taper type: 25 W Taper spindle threaded Spindle speeds: stepless from: 55 rpm up to: 3000 rpm Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Total power required: 2.0 HP Machine´s weight about: 550 kg Overall dimensions machine: Length: 1400 mm Width: 510 mm Height: 1300 mm

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm number (steps): 12 from: 45 rpm up to: 2800 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Various accessories: On work bench: Working bench: Length: 2000 mm Width: 800 mm Height: 900 mm 3-jaw chuck diameter Set of collets Drilling tailstock Toolholders