sterile used for sale

Sterile tank electropolished 18,100 litres, double coat, Interior Product area: 4 bar pressure-resistant / vacuum Material: 1.4435 / V4A / 316L Jacket: 4 bar pressure-resistant Material: 1.4404 / V4A / 316L

Cat.-No. 15-00071 new for sterile aseptic warehousing and outsourcing for KZE Tanks KZE-fitting complete connection DN 40 right – 90° bow welded filter and butterfly valve DN 15 180° bow double pipe clamp DN 40/15 Air G-DN 25 li-FSV G-DN 25 DIN 11864 for gases 0,5 bar lifting device + cleaning Below SV DN 40 VA – Handle at the front manometer up K/M DN 40 AISI 304 Weight: 8 kg Surcharge for filter cartridge Pall Emflon 0,2 € 100,-- All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from 97753 Karlstadt-Karlburg Subject to prior sale Please visit our Web-Site: www.eurolux-ag.com

Cat.-No. 13.0327 in a very good condition ground inside and outside grain 180 for an additional charge with agitator upper bottom: • thread connection DN 50 and DN 25 tank body: • 2 openings for agitator Ø 450 mm and 280 mm lower bottom: • on 4 adjustable feets Measurements and weight: Height x diameter: 3400 x 2300 mm Height tank body: 2000 mm Weight: approx. 2 t Operating instruction for control valve and drawing available. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Power bottle 10 ml, 400V / 50Hz , the line includes: a filling machine BOSCH, type FLP 3060, production 12,000 bottles / h, 6 filling stations, with self-enspirating stainless steel rotary lobe pumps, dosing accuracy +/- 0.5%, insertion of the spray pump, a vibrating machine, filling pumps available: 6 stk.C-BOSCH sealing machine for pressure closure, type VRK 4010, max production 12,000 bottles / h.

Double jacketed, aseptic tank, previously used in a dairy factory for the storage of sterilized UHT milk. Pressure in the jacket: ATM. Pressure in the tank: -1 / 3.5 Bar. Allowable temperature in the jacket: 20 / 150 °C. Allowable temperature in the tank: 20 / 150 °C. Total capacity of the jacket: 3.015 liter. Total capacity of the tank: 40.224 liter. Surface of the jacket: 33 m2. Group Fluide: 2. Category: III. 3 stainless steel legs. No agitator. Manhole on top of the tank. CIP bowls for cleaning inside the tank. Outlet in the bottom, 730 mm height, with outlet of 76 mm. Stairs on the outside. Cylindrical height: 3.000 mm. Inside diameter: 3.500 mm. Total dimensions: Ø 3.684 x 6.081 mm. Weight: ± 7.000 kg. Construction drawing available. CE labelled., Sterile tank available because complete factory is closed., Sterile tank already dismantled and located outside on cradles., Type of ...

A Krones glass bottle filling line Equipped with a bottle vacuum system Performance today. 14,000 bottles of wine per hour Type filler: K 323-152, year of construction 2000 Bloc formation mechanically with a Krones Rinser machine Variojet Type K 562-235 with motorized higher adjustable filler upper part and with manual locking for VK- VKS- VC- VVHL and VVHK filling system 7 different wine bottles were bottled (Sample see photo) with manual cullet and filler exterior spraying, manually controlled. with disinfectant spraying device for vacuum fillers with 2 nozzles including control with set of sterile air filters with steam sterilization unit Rinser Medium 1: Water, temperature 50 to 55 °C with collecting tank with circulation pump, equipped with Container Level Control and Temperature Monitoring Medium 2: with saturated steam heating Medium 3: Sterile air with 2 ...

Microbiological protection and PCR cabinet with vertical air flow General characteristics Vertical hood with laminar flow, Class 100 is used for handling different samples in a sterile environment without turbulence and without impurities in the working room. Protects the work area both against microorganisms and other air contaminants, chemically toxic vapors and unpleasant odors, .. etc. Automatic electronic monitoring system controls all functions and all safety alarms of the system according to EU norms offers many working possibilities: 1) Overpressure system: part of the sterile air is evacuated through the front opening. 2) Pressure lowering system: part of the filtered air is evacuated while the outside air is partially brought inside creating a protective barrier without affecting the laminar flow. Protection of personnel and the environment, but can also be used for work ...

PreviousNext BRAND NEW GABLE TOP FILLING LINE FOR SALE Item #: Usm-195 Category Gable Top Machines Brand New Gable Top Filling Machine, Speed 3000 Pack Per Hour, Filling Volumes 200ml to 1000ml, Year of manufacturing 2023, Pack Type B 70x70, Cold and Hot both Filling Possible, UV Sterile System and Hydrogen Per Oxide Sterile and Alcholic Sterile. Suitable for Milk, juices, Cream and yogurt, Expiry Date Hot Stamping also instaled, Cap feeder, Lifter and Cap Applicator Also installed. Cap Applicator Made by Branson USA. Air Compressor also included, PLC Brand Inovance

Used Filling Monoblock Galdi Up to 6000 BPH Introduction to Advanced Bottling Technology Initially the Galdi RG260A a high performance filling monoblock from 2010 stands as a cornerstone of modern bottling operations Having been recently overhauled it showcases unmatched efficiency and reliability Consequently achieving speeds of up to 6 000 bottles per hour this machine sets a benchmark in the industry Specifically it is engineered for Pure Pak Daimond Standard Curve B style T Bottom containers Moreover it utilizes 36mm Elocap caps demonstrating its versatility and adaptability to various packaging needs Ensuring Uncompromised Product Safety of the Filling monoblock Galdi Importantly one of the critical aspects of the Galdi RG260A is its disinfection killing rate With up to LOG5 it guarantees the highest levels of product safety This capability is especially crucial in today s market wh ...

FOD ovens, such as autoclaves, run batch processes and are the ideal solution for the sterilization of all those production lines in which the variability of products, batches and formats do not allow the use of continuous sterilizers such as tunnels. FOD ovens main advantage lies on its particle contamination class assurance. Fedegari guarantees the contamination level to remain under the established standards values for 100 class. This accuracy is verified also during the most critical phases such as heating and cooling, when the thermal expansion of the filters may release a great amount of particles. Particulate contamination control originates from complex fluid dynamic studies and a close collaboration with Camfil, the world’s most respected filter manufacturer, with whom Fedegari works at the development of high-temperature filters. DESIGN & TECHNICAL FEATURES • Sterilizing c ...

FOD ovens main advantage lies on its particle contamination class assurance. Fedegari guarantees the contamination level to remain under the established standards values for 100 class. This accuracy is verified also during the most critical phases such as heating and cooling, when the thermal expansion of the filters may release a great amount of particles. Particulate contamination control originates from complex fluid dynamic studies and a close collaboration with Camfil, the world's most respected filter manufacturer, with whom Fedegari works at the development of high-temperature filters. FOD ovens, such as autoclaves, run batch processes and are the ideal solution for the sterilization of all those production lines in which the variability of products, batches and formats do not allow the use of continuous sterilizers such as tunnels. • Single-leaf flush door on both sides ...

- Year of construction: 1974/1997 - Output: 6000 L/h - With pressureless tank, sterile filter, CO2 dosing - Sterile filter - Piping, with automatic valves

Used form-fill-and-seal machine Make: FINNAH Year of construction: 2001 Capacity: nominal 15-45 cycles/min. a'12 cups (2x6) Filling volume: 100-500ml Control: Control cabinets with Siemens S5 and S7 Aseptic: no, sterile air tunnel for filling line Eyelid sterilization: UV lamps Products: Yoghurt, quark desserts Product shelf life: 30 - 40 days in the chiller cabinet Available format sets: 150 grams = 3456 kg/hour 180 grams = 4147 kg/hour 200 grams = 4608 kg/hour Film material: Container film: PS, width 578 mm, thickness 0.8 mm. Lid film: Laminate, width 566 mm, thickness 0.08 mm, 45g/sqm for Mixpap polyester/paper composite (laminate), Control mark disdance: 185.95 +/- 00.8 mm Banderole: Paper, width 390 mm, thickness (weight) 97.5 g/m2 Height of the indivi ...

General SKU289P522 LocationBarneveld MakeVötsch Industrietechnik GmbH TypeNTSD 75/100 Year of construction1998 Main Features MaterialStainless steel Volume562 Ltr. Max.temp.280 °C Specified Features - Drying oven Drying ovenhot air sterilizer Max. temperature280 degr.C. Number of compartments:1 Capacity562 dm3, (Total steam capacity 1,19m3) Internal width750mm Internal depth750mm Internal height1100mm Electric capacity16,2 KW Number of doors:1 + 1 (Sterile and non-Sterile side) With air circulationcheck With fancheck Motor1,1 KW, 400 Volt With racks(3x) With timercheck MaterialStainless steel 1.4301 (304) Information Machine number577 81049 With switchcheck With switchgearcheck Floorspace1,6x1,3 M Total height2,1 M Weight900 KG Extra SpecificationsRated capacity 16,2 kW, with circulating air Fan 1,1 KW, 400 VoltDrying ovensVötschDryers > Drying ovensB ...

Groninger production line for RTU nested syringes comprising MWU 010 semi-automatic opening system for outer bags of sterile tubs, MWF 100 fully automatic machine for the removal of cover foils and the fabric inserts of sterile tubs and DFVN 5000 filling & closing machine (CIP/SIP-system, filling system RKP with re-circulation suitable for suspensions, etc.), capacity up to 9,000 objects per hour Including format parts to handle the following syringes: 0.5ml / D=6.85mm 1ml long / D=8.15mm 1ml short / D=10.85mm 2.25ml / D=10.85mm 5ml / D=14.45mm 10ml / D=17.05mm 50ml / D=31.5mm

Used equipment for the treatment and the preparation of water It is a reverse osmosis that produces a filling water called TABLE WATER Manufacturer UAT UNIVERSAL AQUA TECHNOLOGIES INC USA Model TP 110K Year of production 2001 Capacity 12 000 L h Operating hours 9 810 Volts 380 Hz 50 Ph 3 Description of equipment MM FILTER INPUT WATER TREATMENT REVERSED OSMOSIS UAT UNIVERSAL AQUA TECHNOLOGIES INC USA 2001 DEMINERALIZED WATER TANK 12 m3 PUMPING BLOCK FOR MINERALIZATION MINERALIZER MINERALIZED WATER TANK PUMPING BLOCK FOR WATER DISINFECTION AND DELIVERY TO FILLERS Technological description of table water production a General The plant for the production of table water has a capacity of 12 000 l h It consists of Sand filter Device for reverse osmosis TP 110K Product water tank Pump for mineralization of product water Mineralizer Mineralized water tank System for ozonation disinfection of min ...

Overview This complete filling line for single-use glass was delivered in 2019. Commissioning was stopped in Q1 2020, and resumed in Q4 2021. The line has been running 2/3 days per week since Q4 2021. The line can do 20 variations of bottles including 300ml, 330ml, 500ml, 568ml & 650ml. Components Depalletiser | Emmeti | MT565 | 2016 Siemens Simatic controls, Harford control panel. Bottle outfeed conveyor, plastic chain-link 1400 mm x 9.6 m with tapered outfeed on stainless steel supports. Krones Glideliner Accumulator with tapered outfeed, 850 mm to 350 mm wide Empty bottle inspector | Krones | Linatronic | 2003 60,000 bottles per hour Throughfeed stainless steel slat chain conveyor Height adjustable legs complete with dust canopy. Left to right orientation Filling block for glass | Krones |  2003 rebuilt 2018, installed 2019 Capacity: 50.000 bottles/h at 0,33 l long-neck glass bottle  ...

Fully automatic inspection machine for dry sterile products in vials. Capacity: up to 300 units / min. Format parts: vial diameter: 16.25 and 22 mm. PLC: Alan Bradley. incl. separate control cabinet (dim: 2400 x 600 x 2000 mm, weight ca. 500 kg) and further accessories.

System: 1-track rotary cup filler Performance: 1,500 - 1,800 cups per hour Cup diameter: up to 100 mm Dosing system: movable piston-valve filler Cleaning: Manual Filling volume: e.g. 100 500 ml (adjustable) Casing and frame: Stainless steel 1.4301 and MAKROLON Control: Siemens SP 7 with 4" touchpanel and colour display Power: 0,9 kW / 400V - 10A Air consumption (at 6 bar): approx. 340 l / min Weight (net): approx. 500 kg Dimensions (L x W x H): Basic dimensions: 820 x 820 x 1.600 mm including filler and evacuation: about 2,000 x 1,300 x 1.600 mm Machine stations basic version: - Cup magazine with automatic destacking - Piston valve filler for pasty products, e.g. Greek yoghurt, fruit yoghurt, cream, etc. Volume: e.g. 100-500 ml (others on request) -Board magazine and trailer -Hot sealing station -Cups lift and pull Options: -transfer dev ...

Sheet filter, Plate Filter Seitz Orion 60 x 60 for Beer, Wine, Juice With 23 stainless steel plates 60 x 60 cm With 56 x PVC filter plates 60 x 60 cm With 4 x Endplates 60 x 60 cm / steel Fittings complete Measurements and Weight: Height: 1680 mm Width: 3500 mm Length: 820 mm Weight: 1350 kg 60 x 60 Per plate = 140 Ltr in the case of sterile filtration – 2940 Ltr =350 Ltr. in the during clarification – 7350 Ltr. 3 Filter layers per m²

52,000 litres KZE tanks/storage tanks/ sterile tanks 4 pieces UNI-BAR B. No. 19-091 A-D GL Dimensions: Diameter approx. 3,175 mm Zyl. Height approx. 5,750 mm Total height with feet approx. 7,570 mm Material: V4A, WSt. 1.4571 Containers with curved floors Wall thicknesses: underbody 5 mm, sheath 4/3/2.5 mm, upper floor 3 mm Topsoil: 1 threaded nozzle DN 80 with removable spray head, with pulled-down line NW 40 1 Venting nozzle NW 80 Cylinder: 1 manhole 350 x 450 mm swivel 1 stand display valve with scale strip and plexiglass tube 1 threaded nozzle for clear drain NW 40 1 1/2 for tasting tap 1 slanted seat flange DN 350 for agitator - without agitator - Underbody: 1 outlet pipe pulled forward DN 65 Otherwise according to sketch and photo

Sheet filter, Plate Filter Seitz Orion Type 60A100 for Beer, Wine, Juice Manufacturer: SEITZ Orion Type: 60A100 No.72044 Year of production: 1975 With 98 x PVC filter plates 60 x 60 cm With 4 x Endplates 60 x 60 cm / steel Fittings complete Measurements and Weight: Height: 1690 mm Length: 4200 mm Width: 1300 mm Weight: 1650 kg 60 x 60 Per plate = 140 Ltr in the case of sterile filtration – 2940 Ltr =350 Ltr. in the during clarification – 7350 Ltr. 3 Filter layers per m²

52,000 litres KZE tank/ storage tank/ sterile tank UNI-BAR B. No. 19-094 GL Dimensions: Diameter approx. 3,175 mm Zyl. Height approx. 5,750 mm Total height with feet approx. 7,570 mm Material: V4A, WSt. 1.4571 Containers with curved floors Wall thicknesses: underbody 5 mm, sheath 4/3/2.5 mm, upper floor 3 mm Topsoil: 1 threaded nozzle DN 80 with removable spray head, with pulled-down line NW 40 1 Venting nozzle NW 80 Cylinder: 1 manhole 350 x 450 mm swivel 1 stand display valve with scale strip and plexiglass tube 1 threaded nozzle for clear drain NW 40 1 1/2 for tasting tap Underbody: 1 outlet pipe pulled forward DN 65 Otherwise according to sketch and photo

Sheet filter, Plate Filter Seitz Orion Type 60A150 for Beer, Wine, Juice Manufacturer: SEITZ Orion Type: 60A150 No.72466 Year of production: 1979 With 85 x PVC filter plates 60 x 60 cm With 2 x Endplates 60 x 60 cm / steel Fittings complete Measurements and Weight: Height: 1180 mm Length: 4100 mm Width: 950 mm Weight: 1650 kg 60 x 60 Per plate = 140 Ltr in the case of sterile filtration – 2940 Ltr =350 Ltr. in the during clarification – 7350 Ltr. 3 Filter layers per m²

Sartorius Stedim biotech BioWelder 16370 The BioWelder works with a thermal welding cycle that does not require laminar flow. In this welding process, the blade is kept sterile and endotoxin-free throughout the process. The inserted hoses are cut with a knife and then fused together by the device. The cycle process is fully automated and is only released after a full cycle. Various programmable holders make it possible to weld thermoplastic hoses of the same type (e.g. C-Flex, Sanipure, Pharmed) with diameters from 6.4 mm (1/4") to 19.0 mm (3/4"). Characteristics: Fully automatic operation Welds thermoplastic tubes up to 3/4 inch outer diameter Pre-installed settings for C-Flex, Raumedic FluiSoftTM, AdvantaPure, AdvantaFlex, Pharmed and Sanipure hoses True Thermal Weld offers exceptional strength Aseptic connection without laminar flow hood Data output by a print ...

Puranity PU 20 in complete working order but needs new filters. Intended use Increasingly sophisticated technologies, continually lower detection limits in laboratory analysis, and the requirement for biologically-pure water in research correspondingly require the water used to be of ever higher quality. The novel Puranity PU 20 line of water purification systems has been developed to produce such ultrapure water, as well as to fill the needs for userfriendly systems and complete solutions Puranity PU 20 ultrapure water systems produce salt-free, organically-pure particle-free and sterile filtered ultrapure water. To make full use of the long and economical service life of the high-quality purification media, the feedwater for Puranity PU 20 systems must be pretreated by an appropriate purification step (reverse osmosis, ion exchange or distillation. Application areas - An ...

Automatic washer for cleaning, disinfecting and drying. The washing machine comes with conveyor, which transported the container (in rinse baskets) and discharges from the sterile area. Suitable for containers of 5-1000 ml.

Used filling line for glass bottles, capacity 0.33 - 1 l. Line description: - 4XP25 packing machine with the following parameters: - stepless adjustment range - 3500- 8200 b / h, and 5300-12300 b / h - maximum capacity for sparkling water with 6g / l CO2 and temperature 235oK / 11500 g / h for bottles. 0.33l; 5000 g / h for the cylinder 1.0l / - installed power - 2.2 kW 380 V - CO2 consumption - 40 kg / h - pressure of CO2 or sterile air in the tank higher than the fluid pressure by 0.150 MPa - air consumption - approx. 13 m2 / h - air pressure - 0.5 MPa - number of nozzles - 36 pcs. - number of closing heads - 8 pcs. - noize - 90 dB / A - overall dimensions: width - 2895 mm; length - 2125 mm; max height - 2530 mm; curb weight - 5100 kg - service - 1 person

Pressure filler SEITZ TIRAX SF12 For normal and sterile filling of still and carbonated liquids at a filling pressure of up to 5 bar and for hot filling. Operating pressure: 5 bar 12 digits infinitely adjustable Capacity approx: 300 to max. 800 bottles/h Dimensions and weight: H x W x D: 2400 x 940 x 1120 mm Weight: 615 kg Operating instructions and spare parts list available!

. Belimed sterile washing machine Stainless steel version V2A Heating capacity 19.7 Kw for cleaning laboratory glasses, production parts

NuAire NU-8700 CO2 Double Chamber Incubator • Two independently controlled chambers  • Precise temperature stability and precise CO2 and humidity controls  • 100% stainless steel chamber construction • Water jacket with large capacity 75.7 liters • Contacts for remote alarm output • Easy-to-maintain sterile environment with HEPA filtration  The NuAire NU8700 CO2 Dual Chamber Incubator features two precise temperature-controlled chambers with HEPA filtration  for the optimal storage of embryos, gametes and animal tissue.  The microcomputer-based control system independently monitors and controls the temperature,  humidity and CO2 levels in each chamber.  The large water jacket is an ideal heat sink for precise temperature control of +/- 0.2 °C at 37 °C.   The chamber temperature ranges are between 5 °C above ambient temperature and 55 °C.  CO2 can b ...

1 of used bottling line for beer, consisting of loading table, Harlands Proteus single-station wrap-around pressure-sensitive labeller, Moravek BF15 sterile filter, Moravek BC15 carbonator, Moravek 12/12/1 rinser / filler / crowner, Linx CJ-400 ink-jet coder, Cheops tray/pad loader with shrink-wrapper, interconnecting conveyors. Used for 330 ml (D 60.7 x H 227 mm), speed 2.500 - 3.000 bph, and 500 ml (D 69 x H 245 mm) speed 2.200 - 2.500 bph, packed as either 4x2=8 or 6x4=24 bottles per tray or pad. Equipment new 2015.

Bouwman Pharma Plant Isolator with freeze-drying system Isolators are the safest method to ensure sterile conditions. In insulators, an evaporator in conjunction with a distribution system takes over the automated decontamination. Year of construction 1991 Weighing System - Weighing Range: 20-6000 gr Abm. Inside: ± W160 x D150 x H110 cm Item condition: used

Mobile 4-gloves Isolator for sterility testing. Working chamber with 4 sleeves for working with sterile materials. Incl. air sampler Theo MAS-100/ISO. PLC: SIEMENS S5. Unit requirements cleanroom Grade A.

Used dough weigher RHEON, type: KN-125 with belt scale and rotary table -Refurbished- - 1 row - Shapes: round, oblong (embroidery), ribbon - 100 recipes can be stored - in stainless steel and food sterile - with belt scale from OSC - with rotary table - Condition: very good, as new, completely overhauled - 6 months warranty Technical data: - Weight range: 10 - 250 g - Product length: up to 500 mm - Power: 20 - 100 pcs./min. Visits and test runs are possible by arrangement.

Used dough weigher RHEON, type: KN-125 with belt scale and rotary table -Refurbished- - for single or double-filled products, such as coloured cookies, sweets or other pasta - all possible forms (see photo) - 100 recipes can be stored - in stainless steel and food sterile - with belt scale from OSC - optional double filling unit - Condition: very good, as new, completely overhauled - 6 months warranty Specifications: - Weight range: 10 - 90 g - Product length: no limit - Output: 1,200 - 6,000 pcs./h (depending on product) - Weight performance: max. 180 kg/h - Machine dimensions: 1,516 x 874 x 1,360 mm Visits and test runs are possible by arrangement.

1 of used beer bottling line, make Moravek, new 2007. Consists of Moravek BF sterile filtration unit with Parker DH filter housings for 1.00 and 0.45 micron filter elements, bottle loading table, Harlands Proteus full wraparound self adhesive labeller, ink jet coder, Moravek BC15 beer process control unit with inbuilt carbonator processor and filling machine pressure control system coupled to a Moravek 12/12/1 counter-pressure rinser/filler/crowner with double pre-evacuation, Mapex Flo level detector with faulty bottle rejector, Cheops Termopak tray/pad shrinkpacker and inter-connecting conveyors. Moravek 5SA portable menu-fed CIP set, swing bend plate and associated pipework. Line originally ran at 2.300 bph of 500 m (D 75 x H 225 mm, 26 mm crown-corks), packed as 4x2 and 4x3 on tray/pad + shrinkwrap film. Last used for 330 ml LongNeck bottles (D 60 x H 227 mm).

Bausch complete vial line including labelling and inspection in „as-new condition comprising: Bausch type 721 De-bagging machine for vial tubs size 221 x 379 x 49.5 mm, with oRABS Bausch type 411 enclosed sterile transfer chamber to decontaminate outer surfaces using 4 UV light lamps Bausch type 721 De-lidding and de-nesting of the vial tubs under isolator Bausch type 534 filling and closing machine for stoppers/rubber bungs, operates under class A conditions into an isolator for toxic products, rotary infeed table, pre- and post-weighing for the In-Process Control (IPC) of a 100% weight verification of each vial, pre-gassing with nitrogen, dosing using 4 peristaltic pumps with a filling accuracy of up to +/-1% Bausch type 551 closing machine for aluminium crimp caps and flip-off with rotary infeed table, under isolator Bausch type 309 cleaning machine for external washing, rinsi ...

Overview  This plant can be used to pasteurize and fill into pouches (BagInBoxes). Most recently, sauces and dressings were filled with it. It consists of a pasteurizing and filling line from TetraPak/ AlfaLaval. The line components were manufactured in 2014 and the line has only a few operating hours, having run only two days a week.  Technical data  Pasteur | TetraPak/ AlfaLaval | Ohmic Heating | 2014 Capacity: 2000 kg/h  3 heating modules á 60kW  Space requirement: 1000mm x 2700mm  Tube heat exchanger| TetraPak/ AlfaLaval | - | 2014     Space requirement: 6200mm x 950mm Sterile tank| TetraPak/ AlfaLaval | - | 2014      Diameter: 1000mm  Filler | | TetraPak/ AlfaLaval | C.A.F.1H/1 | 2014     Capacity: 250 bags/h (with 10l bags)      Possible bag sizes: 2l - 25l       Aseptic filling      Space requirement: 5800mm x 1790mm  

Overview The disposable PET-ACF line was manufactured by KHS in 2006. Most parts of the line are from KHS. Blow moulder is from Sidel and process department from GEA. The line is for sale, as the complete factory is closed Technical specifications: PET bottle formats 330 ml 500ml Suitable for juices and soft drinks with or without CO² Capacity Non-carbonated drinks: 30.000 bph (330ml 500ml) Carbonated drinks: 24.000 bph (500ml) Control: Siemens S7 Year of manufacture: 2006 The line in detail: Manufacturer: Sidel Machine type: Blow moulder Model: SBO 16 Year of manufacture: 2006    Manufacturer: KHS Machine type: Cap steriliser Model: SCS 8 Flatcap 28mm Year of manufacture: 2006    Manufacturer: KHS Machine type: Cap steriliser Model: SCT 4 Flat 38 mm Year of manufacture: 2006    Manufacturer: KHS Machine type: Filler Model: asmofill ACF 30-70-100-15 incl. supply units for peroxide ...

USED SIG CFA 406 FILLING LINE FOR SALE Item #: Usm-184 Category Sig Combibloc We have SIG Combibloc 2L machine CFA 406 Filling Line For Sale: CFA 406 filler, year 2004, working hours 33411 Sterile air system- 2004 Evacuation table- 2004 Buffer table- 2004 Closures Applicator- Combiswift type of closures- 2002 Tray packer- 2004 Conveyers

Complete BOSCH line for sterile ampoules filling under isolator Production: 400 ampoules per minute working range • Diameter : From 9 up to 30 mm • Height : From 60 up to 160 mm • Formats incluided :1 - 2ml The machine comes with ISOLATOR and DEDICATE AHU AND CIP/ SIP IPC (weigh control ampoules)

Aerosol system for the pharmaceutical sector (set up for anti-asthmatic product), capacity max. 50 doses/min, consisting of: Dose sorter X02046-023/003 • Feed hopper • Elevator • Horizontal disc sorter • Blow-out unit with sterile-filtered nitrogen • Turning unit Valve sorter P 2058/1 • Sorting bowl for valves • Feeding of directional valves in Micromat Diaphragm filler Micromat P 2015/1B • Purger (displacement of air in the cans with propellant gas) • Putting on the valves • Crimping of the valves • Suspension filler for active ingredient, max. 100 ml • Propellant gas filler (deactivated), max. 100 ml Outlet turntable • Diam. 800 mm • Adjustable speed Conveyor belts - Available format set for can diam. 22 mm, heights 44 or 59 mm, filling quantity 20 ml, valve 20 mm without riser tube - Qualification documentation (IQ/OQ/DQ) a ...

Fully automatic filling line GALDI, type: RG 250 UCS - Filled in PE paper laminated cardboard packaging 0.5 and 1.0 liters - Sterile air in the filling room - Sterilization of containers - CIP cleaning for filling system possible - Drip-free filling - Suitable for products with high or low viscosity - Any quantity to be filled can be set - Operating hours: 13,162 h Matching tray packer and conveyor system also available.

Make: AMPACK, Type: Round filler ARL 8/3 Cup diameter 95mm Machine No.: 783 (0783000C) Year of construction: 1993, Commissioning 09/1994 - Control: year 2021, New built on Siemens S7 with encoder. - Slip-on lid station: 2008 NEW - All three fillers completely renewed 2022 Inclusive: - Sterile air module for laminar flow - Tray packer AMPACK - Tray erector A&F, for trays of 20 and 12 - Fruit mixing station (3x) - Various conveyors comple line in very good care Dismantling by the buyer or etra charges

GAI Bottling Line - Triblock (Rinser, Filler, Crown Corker) Model 3031 Year of construction 2017 - facility very well maintained and in a very good condition Isobaric bottling line 12 digit rinser, 12 continuous filler, crown cork type 26 & 29 separately Sterile filter for air and water at the inlet PLC Control Electro-pneumatic filling valves Bottle shower at the spout

CANS TINS Filler 8 1 New for sale This filling machine is equipped with new Proportional Flow Regulator PFR technology and is using Japanese step motors Maximum microbiological safety by contactless filling The filling accuracy is always guaranteed through every individual load cell and with every single bottle in every cycle With the help of the latest technology actuators with step motors every individual valve has its own proportional valve The target filling value is always matched correctly The Proportional Flow Regulator technology is able to adjust the flow of the product proportionally The machine utilizes Japanese step motors and actuators It does not consume air and so it does not have any air collectors This reduces the costs of the compressor power consumption and maintenance Every nozzle has its own load cell at the bottom of the bottle base platforms The electronic pre expu ...

Blowing and Sterilization station MCF Trade Model 2 Never used This machine allows the washing of glass containers of various sizes by means of a jet of air and steam Automatic blowing and sanitizing station fast model with sterile air for the elimination of any foreign bodies inside the containers also prepared for steam injection to sanitize and heat the containers The blowing station is a machine designed for washing glass containers of various sizes see photo The machine essentially consists of a linear conveyor belt that places the containers on a single row These pass through a tilting group formed by a clamping system that can be adjusted according to the format to be processed Once the containers are overturned they descend onto nozzles with adjustable distance and height in order to better center and clean the containers At the end of the operation the containers return to their ...

Used isobaric filler Machine Bertolaso 11000 bph year of the remark of isobaric filler 2021 suitable for bottling sparkling and semi sparkling wines entrance on the left completely overhauled isobaric filler in all its parts with original Bertolaso spare parts documentable bottle sizes 85 88 90 112 6 sets of channels with isobaric filler to make the levels the electrical panel of the Used Isobaric Filling Machine according to CE standards use and maintenance manual spare parts manual available for this isobaric filler the production speed of isobaric filler is 9000 BPH with the sparkling wine the production speed is 7000 BPH with spumante This isobaric filler is immediately available and delivered in case of purchase We can assist the buyer in each step of the commissioning and testing operation of the Used Isobaric Filling Machine How to build one isobaric triblock The isobaric filler c ...

Used Filling Monoblock for Wine Bertolaso 15000 BPH 2001 Rinser Automatic CALIPSO 63mm 2 450mm rotary rinser with 63 spray nozzles that penetrate 90mm deep into the bottle 2 channel rinser for steam sterilisation Support structure completely covered with AISI 304 stainless steel sheets AISI 316 stainless steel gripper elements with jaws made of food grade material AISI 316 stainless steel spray nozzles and spray valves Stainless steel drip tray with drain line pressure reducer for rinsing agent total treatment time at 15 000 bph 12 seconds Filler Low vacuum filling machine model ENOICA 72 2800 mm with 72 filling valves Ring bowl completely made of stainless steel AISI 304 bowl bottom with slope filling valves completely made of stainless steel AISI 316 Electric filling bowl height adjustment by push buttons on the control panel of the machine Electronic filling level probe Endress Hauser ...