We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Number of milling spindles: 2 St. fence: 1 ja workpiece: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ...
Drilling, dowel and milling centre Stegherr FD-E For efficient doweling of corner joints in windows and doors, doweling of transoms, setting timber and central friezes as well as milling out recesses for fittings and door locks. 4 controlled servo axes (X, Y, Z, NC-Stop) Positioning stop NC-Stop Stop extension NC-Stop to 3200 mm Lateral workpiece pressure unit on machine table Increase of clamping height to 140 mm Workpiece scanning horizontally Vertical workpiece scanning Workpiece Length Measurement Horizontal milling unit: 3.5 kW, up to 15000 rpm, Vertical milling unit: 2.4 kW, up to 15000 rpm Drilling unit for one dowel drill bit at a time Drilling unit for one dri ...
used, good condition make Stegherr type BV speeds infinitely variable 3 - 18 m/min. storage location 97447 Gerolzhofen, free loaded, unpacked delivery as is, as viewed, without guarantee and warranty ...
working length X: , mm working length Y: , mm Number of milling agregates: , St. Number of boring motors: , St. Stegherr type KF counter milling machine for windows and doors -------------------- Machine can still be seen in use -------------------- Manufacturer description: The Stegherr type KF counter milling machine is a machining center for cutting, counter-milling and drilling wing and Frame timbers for the countered corner connection in doweled or screwed version. The excellent quality of the counter connection is ensured by two counter-rotating milling spindles. Become at the same time the holes for the screw or dowel connection executed. The dowels can also be used in the same operat ...
Manufacturer: Stegherr, Type: FDE, Year: 1993, Control: Verdübelung von Kämpfer-Setz-<CRLF>hölzern, Sprossen und Türelementen., Program: PC Steuerung, Work piece width min-max mm: 20-150, Min.-max. workpiece length in mm: 400-3300, Min.-max. workpiece height in mm: 10-80, One or two Spot machine: 2, Year :1993
Bore diameter: , mm Number of heads horizontal: , St. Number of heads vertical: , St. Pitch: 1xBohrkopf mm Working width: 3300 mm Boring depth max.: 80 mm Workpiece thickness: 150 mm Motor output: 0,5 kW STEGHERR - Dowel drilling machine type FD/E ------------------------------------- for the efficient dowelling of crossbars and slats, rungs and Door elements. The window and door dowel drilling machine is an extended FD and is equipped with a freely programmable PC control with a floppy disk drive and 14 screen equipped. Up to 1000 drilling patterns with 10 holes each can be saved and accessed via code numbers. Specially designed for window and Software developed by door manufacturers guaran ...
Stegher FD Dowel Drill Brand: Stegher Type: FD Year of construction: 1995 M-No.: 35/12951 Control: Alfa-numeric, with pre-programmed drill cartridges Longitudinal and strin-side bores Length stops: Left and right digital stops for longitudinal drilling Lugs for left and right side holes with turret positioning Dowel dimensions: 6-16 mm Drilling depth: 80 mm Motor: 2.2 KW Compressed air: 6 bar Suction: ø80 mm
Description: For drilling of glazing bars and frames, door components and sash joints 10 different drilling programmes Drilling head with 2 spindles Drilling stroke: max 80 mm Pneumatic workpiece hold-down device Right and left length stop  , drilling units horizontal: 1 pieces, packing measure approx (l x w x h): 1,300 x 1,400 x 1,650 mm, Approx. Onsite Dimension. (l x w x h): 6,000 x 1,400 x 1,600 mm, weight approx.: 400 kg
Shaper cutters from Module 1 to Module 14 available: - different no. of teeth, different pressure anles, different profiles, bores and sizes! shaft cutters Module 1-3 = 150 Euro, 4-5 = 250 Euro, >5 = 300 Euro disc cutters Module 1-3 = 150 Euro, 4-6 = 200 Euro, 7-10 = 250 Euro, 10-14 = 300 Euro. complete list on request! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
bore capacity in steel (diameter): 32 mm x-travel: 510 mm y-travel: 240 mm table surface area: 750 x 200 mm cutter diameter max.: 30 mm inserted tooth milling cutter dia.: 100 mm spindle taper: MK 3 quill stroke: 130 mm spindle turning speed range: 75 - 3200 U/min no. of turning speeds: 12 x links, 12 x rechts throat: 278 mm max. distance between table and spindle-nose: 600 mm voltage: 400 V / 50 Hz total power requirement: 1,1 kW weight of the machine ca.: 360 Kg dimensions of the machine ca.: 0,9 x 0,75 x 2,0 m • unused machine for demonstration purposes, • Machine is equipped with an adjustable depth stop, • Vertical adjustment of the milling head via dovetail guide, • Boring head ...