We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
meta name="robots" content="all">
119,303 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Used stainless steel reactor, AISI 316 steel with a capacity of 12.000 L. New 1980. Technical data: Total capacity: V 12 m3. Pressure 6 Bar. Ex 22 kW motor. Dimensions fi 2200 mm, height 3110 mm.
used
Double-pass steel chimney, height 32.0 m, weight 8,400 kg, diameter D=1,200 mm
used
Quantity available : 5 units Volume: 200 L Material : Stainless steel Year : 1995 Reference : CC200l Total top opening Diaphragm valve: ? 20 cm Dimensions : 85 x 125 x 70
used
Type : Eurobins Materials : Stainless steel Volume : 200 Litres Quantity available : 6 units Dimensions : approx. 70 X 70 X 70 cm
used
Stainless steel container with manhole 500 litres capacity Derivative: NW 50 Dimensions in cm: 120 height x 93 length x 74 width
Qty. 1 Second-hand extrusion press Mfc.: Kobe Steel Built: 1985 Force: 1500 MT Type: Horizontal 4 cylinders, indirect press, independent Control Billet dimensions: dia. 175 mm x 400 – 800 mm Length Application: Extruded?Copper?Alloys
new
thickness of jaw: 200 mm max. clamping width: 205 mm weight of the machine ca.: 21 Kg dimensions: 430x200x195 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
thickness of jaw: 150 mm max. clamping width: 190 mm weight of the machine ca.: 16,5 Kg dimensions: 420 x 155 x 180 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Stainless Steel Heated Hopper for Filling Machine Frequency: 50 Hz Price: on request
used
Mixing screw feeder. Serviced, new bearings and seals.
used
- Diameter 2000 x depth 3000 - Side hatch - Total emptying
used
Line for plastic coating of metal profiles. It has HEADS FOR PLASTICING closed steel profiles with mouthpieces of dimensions 40mm x 60mm and 60mm x 60mm. Mouthpieces can be of any shape for D100mm pipes and 80x100mm profiles But you can cover any profiles. Capacity 45 kg of plastic per hour. Feed rate depends on the profiles, max 45 kg/h. year of construction 2015. Unused, still packed. Steel pipe PVC Coating production line 1 SJ55/25 single screw extruder 2 Coating Mould 3 Steel straighter pipe feeder 4 Water tank 5 Haul-off (2 claws) 6 stacker SJ55/25 single screw extruder Output capacity: max. 45kg/h Screw : Diameter of screw: Ф55mm L/D: 25/1 Material of screw: 38CrMoAl Surface treatment: Nitride processing, thickness: 0.6 ~ 0,8mm, Polishing Max. rotating speed: 50rpm Barrel: Material of Barrel: 38CrMoAlA Inner processing: Nitride with thickness: 0.6 ~ ...
used
Desks (1.80m x 0.90m), Filing cabinets, Mobile pedestals, Visitor tables, Surface maple, Frame steel silver, Manufacturer Steelcase, Visitor chairs, Exact quantity and price on request
used
Description: Bench vice with integrated pipe jaws. Jaw width 200 mm Clamping range max. 205 mm Machine weight approx. 21 Kg Dimensions L x W x H 430 x 200 x 195 mm Approx. Onsite Dimension. (l x w x h): 430 x 200 x 195 mm, weight approx.: 21 kg
used
Dimensions 150 x 160 x 200 cm. Main outlet diameter 10 cm. 2 valves front and back for draining.
used
- for Walterwerk Kiel Jupiter baking oven - for different angles and cone lengths
used
STRIP WIDTH: 750 MM, ENTRY THICKNESS: 0.5 MM, EXIT: 2 x 0.007 MM,
used
Fliss bohrer and thread rolling NC machine. Machine was rebuilded in 2019, complete Hardwere, and pneumatic components, and part from electric. Machine can be used for serial tube production, can be aded Robot for manipulating. Machine will be able to connect with a handling robot for fast delivery and high productiion.
used
Type: Rolling machine UL 40 Parameters: Manufacturer: Šmeral Year of production / SO / GO: - / - / 2019 Location: Czech Republic Description: Semi-automatic machine for transverse hot wedge rolling UL 35 Šmeral redesigned to UL 40. Starting bar material: diameter 14-35mm, length 2500-4000mm. Diameter of rollers 600mm, width of rollers 400mm, max. Length of material feed 150mm.
Qty. 1 Second-hand section rolling mill plant Mfc.: Pomini, OMV, BM, Bendotti Built: 1989 continuously modernised Stopped: 2019 Installed power: 16.2 MW Billet income sizes: 120 x 120 up to 160 x 160 mm Length: 6.0 m Section production: Round bar dia.: 30 – 60 mm Angles from 30x3 up to 100x12 mm U” channel from 40x20 and 120x55 mm T” shape from 30 till 100 mm T” shape from 30 to 120 mm (Special for elevator rails- Leader in Europa) The rolling mill can be implemented with many other profiles by using different grooved rolls. Production capacity: 250,000 – 270,000 T/annum depending on the production mix Scope of supply: Reheating furnace Section rolling mill line Tying Machine Descaler Bundle Machine Cooling tower Machine shop
used
Makes: Hilgeland / EW Menn / Ingramatic Diameter ranges 1mm - 20mm
used
Rolling milling machine Koepfer 153 A/CNC Manufacturer Jos. Koepfer & Söhne GmbH Type 153 A/CNC Built in 1988 Machine No. 153199 Technical data Largest Module 2 Distance workpiece tool axis max. 4- 87 mm max. workpiece diameter - without magazine 142 mm - with magazine 80 (100) mm max. milling length 150 mm max. length workpiece - without magazine 300 mm - with magazine 220 mm min. number of teeth 3 min. screw gait number 1 Main spindle through- 33 mm Hole Mounting hole for 50 mm Jig max. cutter diameter 70 mm max. cutter width - Universal milling head 63 mm - Shifting milling head 71 mm max. axial cutter shift - Universal milling head 40 mm - Shifting milling head 44 mm 35 Longitudinal feeds 0.1 -5.0 mm /WU 10 cutter speeds 210-1680 /min Control (2 axes) CNC Drive power 2.2 kW Weight approx. 2400 kg Available immediately Location ...
used
manual roll gap adjustment 2x7.5 kW motor Bearing Oil circulation lubrication adjustable roller speed 10-41 rpm BJ 1990
new
1 x NEW 'Bainite' (India) Make 1000mm (42in) wide x 400mm (16in) dia two roll mill, Hydraulic nip adjustment (dual acting cylinders), Peripherally drilled chilled cast iron rolls (Hardness 65/72 Shore), with anti friction roller bearings, Friction ratio 1:1.08, Hinged guide plates, Lubrication system comprising pneumatic intensifier with grease reservoir, Electro pneumatic brake with power fail safe mechanism. Safety bars fitted to front and rear. Compact right angle drive with 45kW Siemens AC variable speed squirrel cage motor through heavy duty helical design direct drive reduction gearbox (SF 2), Back roll speed 18rpm/front roll 16.6rpm. All mounted on a compact design fabricated steel bedplate. Stainless steel tray underneath. Including electrical controls comprising Siemens G130 VFD drive and S7-1200 plc with HMI. CE marked, with full Technical file, Documentation and S ...
used
We can offer several thread rolling machines with cylindrical dies, any size.
used
Various threaded rollers
REVAMPED: 1990, WIDTH: 700-1400 MM, THICKNESS: 100 MICRONS - EXIT: 2 x 5 MICRONS 1500 M/MIN.,
Qty. 1 Second-hand cold rolling mill Mfc.: SUNDWIG/MINO Type: 4-HI Built: 1980 Revamped: 2016 Rolled material: Carbon steel SAE1006, S235-S550, C45-C75, IF Strip width max.: 600 mm Thickness: in 6.0 mm out 0.25 – 5.0 mm Speed max.: 500 m/min Coil size: ID 508 mm OD 2000 mm Back-up roll dia.: 590 mm - 625 mm Work roll dia.: 190 mm - 240 mm Motors stands: DC, EAA converters (installed 2004), Rolling force: 500 Tons Coolant Emulsion Filtration by magnetic system Controls PLC system: SIEMENS Scada: Simplicity Thickness control: Entry stand hydraulic equipped with Automatic Gap Control (AGC) Thickness control: Exit stand Utilities: Electrical voltage: 380 V, 3 Phase, 50 Hz Air pressure: 5 Bar Cooling water No. of work rolls: 120 used + 8 brand new No. of back-up rolls: 8 Electric Drawings Mechanical Drawings Certification: Allegato V/8 ...
used
REHEAT FURNACE Type: Walking Beam Incoming Billet: 160 x 160 mm x 8.300 – 12.000 mm Charge: Hot and Cold Discharging Temperature: 1150 Degr. Nominal Production 90 Ton/Hr Fuel: Natural Gas (LNG) Furnace inside dimensions: L x W 12.500 x 12.800 mm REBAR ROLLING MILL: Type: Housingless Stands Roughing Mill: 6 Stands Intermediate Mill: 6 Stands Finishing Mill: 6 Stands Horiz. Stands # 1,3,5,7,9,11,13,15,17 Vert. Stands # 2,4,6,8,10,12,14 Horiz./Vert Stands #16 and 18 CROP SHEAR No. 1 Head & Tail Cropping, Emergency Chopping Type: Crank Shear- Blade width 200 mm CROP SHEAR No. 2 Head & Tail Cropping, Emergency Chopping No. of Blades: 4- Blade width 180 mm DIVIDING SHEAR Cutting to multiple lengths COLD SHEAR Cutting to final length Shear type; CMC 0630 0950 No. of Blades: 2- Blade width 900 mm Product Length: 6-12 Meter (Standard) ...
used
Material: mild steel Reel in stainless steel;
Qty. 1 Second-hand 3 stands 4-Hi Tandem cold rolling mill line Mfc.: Demag Type: 4-Hi Built: 1968 Material to be rolled: low carbon steel Strip width: 600 †1500 mm Thickness Entry: 2.5 mm Exit: 0.2 mm Entry: Coil ID: 510 mm OD: 1800 mm Weight: 15 MT Exit: Coil ID: 510 mm OD: 1800 mm Weight: 15 MT Work roll: dia. 380 mm x 1650 mm Roller bearings Back-up rolls: dia. 1150 mm x 1650 mm Oil film bearings Housing: Closed top, cast steel construction Housing post: 762 x 552 mm Rolling speed: 240 m/min.
Reed 42" x 16" Two Roll Mill. 40HP Motor, with clutch brake. Friction ratio 1.1 Manual Nips. On one-piece steel bedplate.
Qty. 1 Second-hand section rolling mill plant Mfc.: Pomini, OMV, BM, Bendotti Built: 1989 continuously modernised Stopped: 2019 Installed power: 16.2 MW Billet income sizes: 120 x 120 up to 160 x 160 mm Length: 6.0 m Section production: Round bar dia.: 30 – 60 mm Angles from 30x3 up to 100x12 mm U” channel from 40x20 and 120x55 mm T” shape from 30 till 100 mm T” shape from 30 to 120 mm (Special for elevator rails- Leader in Europa) The rolling mill can be implemented with many other profiles by using different grooved rolls. Production capacity: 250,000 – 270,000 T/annum depending on the production mix Scope of supply: Reheating furnace Section rolling mill line Tying Machine Descaler Bundle Machine Cooling tower Machine shop
Qty. 1 Second-hand foil rolling mill plant Mfc.: World Co. (Japan) Type: 6-Hi – Non reversing mill Built: 2002 Application: Copper foil Width: 400 – 700 mm Coil weight: Max. 5 Ton Thickness Entry: 100 – 200 microns Exit: 5 – 100 microns Speed: 0-400/800 m/min. Thickness X-Ray unit AGC system Variable Crown Control Hydraulic servo equipment Main motor power: 200 kW DC Slitter line Mfc.: IHI Width: 150-700 mm Thickness 5 – 50 microns Degreasing line Mfc.: World Co. Strip width: 700 mm Thickness: 10-50 µm Treatment line Mfc.: Kawasaki Built: 2005 Width: 700 mm Thickness: 10-50 µm
Qty. 1 Second-hand aluminium foil rolling mill plant Mfc.: Robertson, Kampf, Schmutz, Nishimura, Waldrich-Siegen, Otto-Junker Built: 1962 – 1989 Foil width: 850 mm Entry thickness: 0.4 mm Exit: 2 x 7 microns Scope of supply: Roughing Foil rolling mill: 4-Hi Intermediate foil mill 4-Hi Finishing foil mill 4-Hi Slitters – Qty. 4 Roll grinders – Qty. 2 Annealing furnaces – Qty. 4 Charging car INDIVIDUAL ITEMS CAN BE SOLD
used
Power: 0 t Thread diameter maximum: 0 mm Thread diameter minimum: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. diameter threaded: 2 mm Max. diameter threaded: 48 mm Gewindelänge: 130 mm Min. pitch: 0.4 mm Max. pitch: 4 mm Min. roll die diameter: 100 mm Max. roll die diameter: 148 mm Roll bore diameter: 54 mm Roller pressure infinitely adjustable: 17 to Roll axis swivel for thru-feed: 8 ° Roll and pause time infinitely variable: 1 - 30 sec Shaft distance: min.: 120 mm max: 200 mm Feeds: stepless up to: 1.4 mm/s Roll speeds: stepless up to: 280 rpm Voltage 50 Hz 3x: 380 Volt Motor power: 5.5 kW Machine´s weight about: 2141 kg Weight total installation approx.: 2401 kg Overall dimensions machine: Length: 1250 mm Width: 1200 mm Height: 1260 mm Space requirement of the electrical box: 800 x 500 mm Various accessories: Set of thread rolls
used
Robust fine rolling mill with 800 mm roll width and 800 mm roll diameter, incl. main drives, auxiliary drives, control cabinet and hydraulic unit for splitting. In regularly maintained condition, rollers without riefen. Available for an extra charge: Matching dust filter from Hellmich.
used
Fine rolling mill with 800 mm roll width and 800 mm roll diameter, incl. main drives and auxiliary drives, split adjustment manually. In regularly maintained condition, rollers without riefen. Available for an extra charge: Matching dust filter from Hellmich.
used
Capacity: 0 t Diameter: 105 mm Length: 0 mm Horizontal and vertical:Horizontal Shaft Ø: 105mm Number of rolls: 3 Stroke X-Axis: 300mm Capacity Tube: 60 x R 1000 Ø x mm Capacity T-Profile: 80 x 80 x 8 x R 1000 mm Capacity HEA-Profile: 140 x R 2500 mm Working speed: 1000 - 24000 mm/min. Length: 1.500 mm Width: 1.200 mm Height: 1.400 mm Weight: 1.700 kg set universal rolls set pipe rolls BC 25 control system ...
used
Power: 12 t Thread diameter maximum: 50 mm Thread diameter minimum: 3 mm MACH-id 5405 MAKE SENY - Japan TYPE H-50-D YOP 90 er SPECIFICATIONS Miniumum pressure 0,5 T Maximum pressure 12,5 T Max. workpiece 50 Ø Min. workpiece 3 Ø Min. Threading lenght 130 mm Max. Threading length 170 mm Shaft Ø 54 mm Power 5 kW DIMENSIONS Length 1500 mm Width 1400 mm Height 1500 mm 1 set M4 x 0,7 x Ø 150 1 set M5 x 0,8 x Ø 150 1 set M6 x 1,0 x Ø 150 1 set M8 x 1,25 x Ø 150 1 set M8 ...
used
Qty 1 x Shaw 60in x 22in two roll mill, Manual nip adjustment, Peripherally drilled rolls (front and back), Hinged guide plates, Sleeve bearings with motorised lubrication, Right angle drive gearbox with 115Kw DC variable speed motor, All mounted on a heavy duty bedplate. Carter stockblender mounted on too. Complete with controls etc and in very good condition.
used
Wire rod: 1.8 - 9.0 mm number of caliber: 13; very good
1 x Heavy duty 2 roll mill Roll dimensions: 2100mm x 665mm dia. Hydraulic nip adjustment, Safety push bars, Peripherally drilled rolls, Sleeve bearings with grease lubrication, Right angle drive gearbox, with Siemens 240kW DC variable speed motor, Strip knives fitted to front roll, Heavy duty fabricated bedplate, Carter stockblender mounted on top.
new
Capping machine incl. brushless motor with friction wheels, container diameter 10-100 mm, capacity maximum 25 cycles / min.
used
About 60 pieces. Timken tapered roller bearings
Qty. 1 Second-hand aluminium foil rolling mill line Mfc.: Kyongil Machinery Built: 2003 Stopped: 2015 Type: 4-Hi Strip width: 850 mm Thickness Entry: 0.3 mm Exit: 12 microns Consist of: Foil rolling mill Foil separator Doubler Annealing furnace
Qty. 1 Second-hand aluminium foil rolling mill plant Mfc.: Marudhar, Sambhav Built: 1993 - 2012 Revamped: 2015 Foil width: 1000 mm Entry thickness: 8 mm Exit: 8 microns Consist of: Melting furnace 22 MT Holding furnace 15 MT Strip caster Roughing rolling mill Intermediate foil mill Finishing foil mill Heavy slitter Strip slitter Foil separator Qty. 2 Foil slitters Annealing furnace
Qty. 1 Second-hand strip rolling mill plant Mfc.: Gautchi, Pechiney, Spidem, Stein Heurty SA, TECMO-HUNTER, ACHARD, WALDRICH Built: 1971, 1973, 1975 Modernisation in 1991 Strip width: 850 – 1600 mm Thickness Entry: 12 mm Exit: 0.3 mm Consist of: Qty. 2 Strip casting line 4-Hi rolling mill Qty. 2 Homogenisation furnaces Slitter Grinder Qty. 2 Coil cars
used
Qty 1 x Schwabenthan 200mm dia x 450mm wide two roll mill, Manual nip adjustment, Digital nip gap readout, Electrically heated rolls, Jahnel gearbox with 10HP motor to each roll (variable speed), Variable friction ratio/roll speeds, Stainless steel interlocked guards and tray. Complete with electrical controls and in good condition. O/a dimensions 2700 x 1500mm