We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
meta name="robots" content="all">
119,978 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Strong Ball bearing start-up ring set 1x Ball Bearing Idle Brushes (62x30mm) 1x Washer Starting rings: 75, 80, 85, 90, 95, 100, 105, 110, 115, 120mm
used
This STAR-BEND STAR 800 CN6/GEN/L Bending machine was manufactured in the year 2006 in Italy. It is equipped with a STAR-BEND control unit and has 6 axis.
used
Producer: INJECT STAR Type: FPW 17 Internal dimensions: Length 1620 x width 560 x height 1480 mm External dimensions: Lenght 1000 x width 500 x height 1050 mm 1 piece - not complet. Used pneumatic meat press for meat and bacon INJECT-STAR type FPW 17 with the possibility of the time setting and the automatic program - Air consumption approx. 7 bar Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36
new
Pump vacuum cleaner with integrated submersible pump that continuously pumps absorbed liquids out of the container, RCDs in the mains connection cable, special filter bags, application-oriented accessories. The pump can be completely removed and the container closed, so this industrial vacuum cleaner can also be used as a normal wet-dry vacuum cleaner. Areas of application: Suction/suction of large quantities of liquid, use in floods, use in flat roof renovation, cleaning of garden ponds and pool facilities. SCOPE OF DELIVERY Including accessory set pump vacuum cleaner. Additional filter 1 x FSS 1200 (foam) Filter bag 1 x FSN 80 1 x Suction hose Ø 35 mm x 5 m 1 x Drain hose Ø 33 mm x 5 m 1 x Handle tube plastic with secondary air slider 2 x Suction pipe plastic (each 50 cm) 1 x Aluminium professional floor nozzle 45 with rubber and briste strips EQUIPMENT Main filter FPP ...
used
High-temperature oven with a maximum working temperature of 1,800C and lowerable/swivel bottom. All sides of the furnace chamber are heated with Kanthal super elements (= MoSi2). Temperature homogeneity is achieved by downward removable U-elements. Operation with 3 transformers and thyristor control. Chamber dimensions: 500 mm x 500 mm x 500 mm (= 125 l.). The oven is practically unused (only about 50 fires).
used
High temperature kiln with a maximum working temperature of 1.800°C and a descending / pivoting bottom plate. All lateral walls inside the chamber are heated by Kanthal Super heating elements (= MoSi2). Temperature homogeneity is achieved by the use of U-shaped elements that can be taken out downwards. Operating with 3 transformators and thyristor control. Chamber dimensions: 500 mm x 500 mm x 500 mm (= 125 l.). Kiln is in mint condition (ca. 50 firings only).
used
Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0 Number controlled axis: 0 CNC Brand: 0 CNC Model: 0 Control: FANUC 0T Technical data Number of axis total: 5 Max. turning diameter: 16 mm Turning length: 130 mm Max. drilling diameter: 8 mm Max. threading diameter: 6 M (Metric) Internal spindle diameter: 16 mm Spindle speeds: stepless from: 375 rpm up to: 8000 rpm Tool-holder: number: 5 Counter-operation: number of tools: 3 Drilling tools: 3 pce Spindle motor: 2.2 kW Machine´s weight about: 1300 kg Overall dimensions machine: Length: 1700 mm Width: 1000 mm Height: 1900 mm Various accessories: Set of toolholders Bar feeder Manufacturer: LNS Type: MINI-SPRINT
used
Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0 Number controlled axis: 0 CNC Brand: 0 CNC Model: 0 Control: FANUC 0T Technical data Number of axis total: 5 Max. turning diameter: 16 mm Turning length: 130 mm Max. drilling diameter: 8 mm Max. threading diameter: 6 M (Metric) Internal spindle diameter: 16 mm Spindle speeds: stepless from: 375 rpm up to: 8000 rpm Tool-holder: number: 5 Counter-operation: number of tools: 3 Drilling tools: 3 pce Spindle motor: 2.2 kW Machine´s weight about: 1300 kg Overall dimensions machine: Length: 1700 mm Width: 1000 mm Height: 1900 mm Various accessories: Set of toolholders Bar feeder Manufacturer: LNS Type: MINI-SPRINT
used
Various clamping systems with zero-point clamping systems. Various groes. For larger parts, e.g. 1000 - 1500 mm or larger. With hydraulic connection for grid plate clamping. All Wuerfel with corresponding grid plates. clamping and grid plates from well renowning German manufacturers. Best condition. 40 slabs available in various size; Very good
used
Various clamping cubes with Zero-point clamping systems. Various sizes. All are for larger parts, for example 1000 - 1500 mm or larger. With hydraulic clamping of the clamping angles. All the cubes are fitted with clamping angles. The clamping cubes and clamping angles are made by best precision well named German manufacturers. All in excellent condition. 40 units in various sizes. ; Very good
used
North Star NSRC / EMCO Pulse Generator Pulse Generator 54kV The pulse generator used in this system consists of two capacitor assemblies which are charged to opposite polaritaants. The system is operated with pressurized insulating gas to supply the specified voltage range of the operation. nitrogen is used for the pulsergefaess for the entire range, wherethe pulse generator pressure of atmospheric pressure (0 psig) reaches to a maximum (60 psig). With 60 psig nitrogen, the pulse generator has at least 27 kV per capacitor and thus delivers a pulse of about 54 kV to the peaking capacitor.
used
Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0 Positions ATC: 0 CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Operating hours: 75960 Technical data Number of axis simultaneous: 5 Number of tables: 1 Number of spindles: 1 Table load max.: 800 kg Longitudinal travel (X-axis): 800 mm Transversal travel (y-axis): 750 mm Vertical travel (z axis): 620 mm Dimension of the workpice: Height: 550 mm Diameter: 500 mm Table divisions (B): 0,001° ° A axis: 145° (+35/-110°) Table speed: 30 rpm Pallets:: System Staflex number: 4 Length: 500 mm Width: 500 mm Transport weight: 200 kg Tool changer: Number of tools: 60 Tool diameter max.: 120 mm Diameter with free adjacent pockets: 200 mm Tool lenght: 400 mm Max. tool-weight: 15 kg Spindle nose:: HSK-A 100 Spindle speeds:: STEP TEC stepless up to: 12000 rpm Torque max ...
used
- overhauled in 2007 (spindle bearings + silde guides) - control: FANUC OT - max. turning Ø: 16 mm - max. turning length in 1 fixture: 130 mm - spindle speed: 300 - 8.000 1/min - cross tools: 5 - spindles in frontal device: 3 - max. boring-Ø: 8 mm - max. thread-Ø: M6x1,0 - fixed and rotating guide bush - parts removal backwards for long partse - after-ripening device - weight: 1.000 kg - div. tool holders - barfeeder CNC-Boss 542/32L, Bj. 1994
used
Used machine Starrag Heckert CWK 400D
used
Type: PI 88 Number of needles: 88 Two pressure pump Needle diameter: 4 mm Max product: width 360 mm Tact per minute: 15 to 55 tact/min. Passage mechanism type: gear rack rail Product passage height: 220 mm Brine pressure: 0,5 to 4,0 bar Electric power: 6.5 kW Machine dimension in cm: Width: 60 Lenght: 210 Height: 190 Delivery time: 30 working days after advanced payment
used
Saw blade Diameter 400 mm Saw capacity 150 mm round Suitable for: - Plastic pipe - Air clamping Country of origin Netherlands Engine power 2.2 kW Machine Weight 750 kg
used
completely stainless steel loaded : 50 to 55% 3.7 kW with vacuum pump with filters Dimensions (L x W x H): ± 2,300 x 1,700 x 1,800 mm
used
Machine type: Tumbler Manufacturer: Inject Star Model: Tumbler 2600 liter Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Machine dimensions in cm: 170x300x190cm Electrical power: 5kW
used
Machine type: Tumbler Manufacturer: Inject Star Model: Tumbler 2200 liter Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Machine dimensions in cm: 170x285x190cm Electrical power: 4.5kW
used
Tumbler Inject Star HS-7 180 L in a good used and functional condition. Completely made of stainless steel. Rollable 180 liter drum with vacuum connection. Machine can be tilted. Dimensions W/D/H 76/110/110 cm. Connected values 400 Volt, 0,75 kW. Workshop tested, immediately ready for use. More on request.
used
Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0 Number controlled axis: 0 CNC Brand: 0 CNC Model: 0 Control: FANUC Series 16i-T Technical data Number of axis total: 9 Number of spindles: 2 Max. turning diameter: 205 mm Machining diameter max.: 12 mm Spindle speeds: stepless up to: 12000 rpm C axis (spindle,resolution): 0.01 ° Independent carriage: Number of positions: 5 number of driven tools: 3 Spindle speeds (turning tools): 6000 rpm Power of driven tools: 0.5 kW Back spindle: up to: 12000 rpm C axis (spindle,resolution): 0.01 ° Turret slide: number: 1 number of tools: 8 number of driven tools: 8 Spindle motor: 5.5 kW Power of back spindle: 3.7 kW Machine´s weight about: 3400 kg Overall dimensions machine: Length: 2670 mm Width: 1375 mm Height: 1600 mm Various accessories: Bar feeder Manufacturer: LNS Parts catcher Workpiece conveyor Lamp Coo ...
used
Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0 Number controlled axis: 0 CNC Brand: 0 CNC Model: 0 Control: FANUC Series O-T Technical data Number of axis total: 5 Max. turning diameter: 16 mm Turning length: 130 mm Max. drilling diameter: 8 mm Max. threading diameter: 6 M (Metric) Internal spindle diameter: 16 mm Spindle speeds: stepless from: 300 rpm up to: 8000 rpm Tool-holder: number: 5 Counter-operation: number of tools: 3 Drilling tools: 3 pce Spindle motor: 2.2 kW Machine´s weight about: 1300 kg Overall dimensions machine: Length: 1700 mm Width: 1000 mm Height: 1900 mm Various accessories: Set of toolholders
used
Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0 Number controlled axis: 0 CNC Brand: 0 CNC Model: 0 Control: FANUC Series O-T Technical data Number of axis total: 5 Max. turning diameter: 16 mm Turning length: 130 mm Max. drilling diameter: 8 mm Max. threading diameter: 6 M (Metric) Internal spindle diameter: 16 mm Spindle speeds: stepless from: 300 rpm up to: 8000 rpm Tool-holder: number: 5 Counter-operation: number of tools: 3 Drilling tools: 3 pce Spindle motor: 2.2 kW Machine´s weight about: 1300 kg Overall dimensions machine: Length: 1700 mm Width: 1000 mm Height: 1900 mm Various accessories: Set of toolholders
used
Turning diameter: 0 mm Turning length: 0 mm Turret positions: 0 Positions ATC: 0 Number controlled axis: 0 CNC Brand: 0 CNC Model: 0 Control: FANUC Series O-T Technical data Number of axis total: 5 Max. turning diameter: 16 mm Turning length: 130 mm Max. drilling diameter: 8 mm Max. threading diameter: 6 M (Metric) Internal spindle diameter: 16 mm Spindle speeds: stepless from: 300 rpm up to: 8000 rpm Tool-holder: number: 5 Counter-operation: number of tools: 3 Drilling tools: 3 pce Voltage 50 Hz 3x: 380 Volt Spindle motor: 2.2 kW Machine´s weight about: 1300 kg Overall dimensions machine: Length: 1700 mm Width: 1000 mm Height: 1900 mm Various accessories: Set of toolholders
used
Flail mulcher for three-point attachment (rear or front) Cat. II, PTO drive 540 rpm, gearbox with freewheel, hydraulic side displacement approx. 350 mm, working width 240 cm, 34 hammer mallets. Further flail mulchers, also laying mowers and other mowing technology in stock - see example photos! Info and offers on request. No sending of package deals or lists. Please name and phone no. for queries. Please let us advise you in advance by phone. Appointment required for viewing!
used
used
VACUUM MASSAGER, INJECT STAR TYPE: MAGNUM 2600 Technical description: Serial number: 559 Capacity: 2600 l Power supply: 380-440V/50-60 Hz, 3ph Power: 7 Kw Drum size: 1300 x 2450 mm Dimensions: 3200 x 1500 x 1950 mm
used
ROTARY MASSAGER INJECT STAR, MODEL: HS-7 Technical description: Bowl size: 650 x 600 mm Power supply: 380-440V/50-60 Hz Dimensions: 850 x 800 x 1200 mm
new
Parts drip tray for STAR machines
used
used
Type: PI 21 Number of needles: 21 Needle diameter: 4 mm Max product: width 250 mm Tact per minute: 15 to 55 tact/min. Passage mechanism type: gear rack rail Product passage height: 220 mm Brine pressure: 0,5 to 4,0 bar Electric power: 1.5 kW Machine dimension in cm: Width: 70 Lenght: 140 Height: 176 Delivery time: 30 working days after advanced payment
used
used
used
– 36 needles – Completely factory refurbished – With 1 year warranty.
used
Automatic injector INJECT STAR BI 124/248 needles. 2006 manufactured. The machine is complete with a rotary filtering system. Fully factory refurbished with 1 year warranty.
used
Injector Inject Star PI 75 Tape width: 61.5cm Machine dimension in cm: Width: 100 Lenght:210 Height: 228 Delivery time: 30 working days after advanced payment
used
Dimension: 15.5/80-24, as good as new, tires with original JCB rims
used
Dimension: 15.5/80-24, as good as new, tires with original JCB rims
used
used
used
Star SR-32 Swiss Type CNC Lathe Machine is in working condition All maintenance has been done regularly FMB Bar feeder Chip and tool conveyor are included
used
Max. Machining Diameter : 20 mm Max. Headstock Stroke : 205 mm Fedek XT-320SI bar feeder Machine is in good condition Power on : 21017 Operating time : 15223 Cutting time : 12542 Bar feeder
used
Starmatic 1303 DC Welder The machine is located in France.
used
Robot Star Gxe 1000, In Perfect State, With All The Maintenance Done On Time. Stroke (Mm):1000 (Vertical),650 (Crosswide),2000 (Traverse) Max Load (5 Kg) Imm Range - 80/350 Ton
used
Used Inject Star HS L750 vacuum tumbler is completely made of stainless steel. The vacuum tumblers are used in meat processing plants for marinating and massaging of muscles and red meat elements, poultry elements or seafood. This vacuum tumbler has two drive-out drums. The device has the ability to adjust the speed of the drum and the direction of rotation, run time and pause. Set dimensions: L:1800 x W:1300 x H1900mm Drum capacity: 750l Batch capacity: around 400 kg Power: 3.3kW Set weight: 760kg
used
used
Seven axis machine with turret (type 420) - with Iemca MiniBoss 325/44 (max lenght 4400 mm) - well equipped (fixed/driven tool holders, collets for barfeed and lathe, guide bushings) - chip conveyor - Fanuc 16-TC Control
used
Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Machine dimensions in cm: 170 x 300 x 190 cm Electrical power: 5 kW
used
Star RNC16 sliding head lathe, in excellent condition, working and operational. Iemca Mini Boss charger included