british flag
Resale Logo

stanko rotary table used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information machines and plants for waste disposal and recycling  Hauck GmbH  http://www.hauck-entsorgungslogistik.de 
banner logo
start page > keywords stanko rotary table > results
8 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1 
125776170 101

STANKO 2622 B for sale


The horizontal boring machine STANKO 2622 B was manufactured in 1977. Technical data : - spindle diameter: 110 mm - length of the built-in turntable: 1250 mm - width of the built-in turntable: 1120 mm - number of  ...
used machine
 
The horizontal boring machine STANKO 2622 B was manufactured in 1977.

Technical data :
- spindle diameter: 110 mm
- length of the built-in turntable: 1250 mm
- width of the built-in turntable: 1120 mm
- number of T-slots: 7
- distance between grooves: 140 mm
- groove width: 22 mm
- limit travels of the extendable spindle: 710 mm
- vertical travel of the headstock: 1000 mm
- longitudinal travel of the built-in rotary table: 1120 mm
- transverse travel of the built-in turntable: 1000 mm
- number of spindle speeds: 21
- number of spindle feeds: 30
- number of headstock feeds: 30
- number of table feeds: 30
- power supply type: three-phase
- number of electric motors: 5
- maximum absorbed power: 16 kW
- dimensions of the machine (length x width x height): 5700 x 3000 x 3000 mm
- the weight of the machine with electrical equipment: 12500 kg
1977
11,250 €  
  PL   request
124946300 110

STANKO 720440023 for sale


centre height: mmrotary table dia.:400 mmtotal power requirement: kWweight of the machine ca.:130 kgdimensions of the machine ca.:500 x 600 x 160 mm

 
centre height: mm
rotary table dia.:400 mm
total power requirement: kW
weight of the machine ca.:130 kg
dimensions of the machine ca.:500 x 600 x 160 mm

 
Price  
    request
124457592 101

STANKO 2A636F1 (Ø 125) for sale


Specifications: Spindle Diameter of spindle mm Ø 125 Cone of spindle ?50 Main drive power kW 30 Rotational speed min-1 6,3 ... 1250 The greatest moment on the sliding spindle Nm 3500 The greatest moment on t ...
used machine
 
Specifications:

Spindle

Diameter of spindle mm Ø 125
Cone of spindle ?50
Main drive power kW 30
Rotational speed min-1 6,3 ... 1250
The greatest moment on the sliding spindle Nm 3500
The greatest moment on the milling spindle Nm 5200 (6000)

Built-in faceplate

Diameter mm 800
Working stroke of the radial support mm 200 Rotation speed min-1 3.15 ... 250
Working feeds of the radial slide mm / min. 0.63 ... 630
The greatest moment on the faceplate Nm 7200

Movements of working bodies

X - table transverse mm 2000
Y - spindle head vertical mm 1600
W - table lengthwise mm 1600
Z - telescopic spindle mm 1000
B - rotary table hail 360 °

Rotary table

Working surface mm 1600 x 1800
Carrying capacity kg 12000 (8000 at X = 3100)

Drive gears

Working feeds on linear axes mm / min 2 ... 2000
Accelerated movements mm / min 5000

Electrical equipment

The supply current is variable three-phase, 380 V, 50 Hz.

Dimensions and weight

Overall dimensions (BxLxH) mm 8700 x 5600 x 5100
Total weight of machine kg 36850
1985
43,000 €  
  UK   request
125109214 109

250 MM Rundtisch for sale


Table / rotary table Stanko import Diameter 250 mm Division into degrees, minutes and seconds Space requirements: L. 400 x B. 400 x H. 110 mm; Good

 
Table / rotary table
Stanko import
Diameter 250 mm
Division into degrees, minutes and seconds
Space requirements: L. 400 x B. 400 x H. 110 mm; Good
 
Price  
    request
3631647 101

STANKO 2A622-2 for sale


Horizontal Boring mill, table type, STANKO 2A622-2 YOM 1990. Mach. No. 421. Almost unused, just 2 months in operation. Spindle Size: 110 mm, X/Y/Z/W- 1250x1000x1000x710 mm Rotary table 1250 x 1250 mm Spindle speed  ...

 
Horizontal Boring mill, table type, STANKO 2A622-2
YOM 1990. Mach. No. 421. Almost unused, just 2 months in operation.
Spindle Size: 110 mm,
X/Y/Z/W- 1250x1000x1000x710 mm
Rotary table 1250 x 1250 mm
Spindle speed 10- 1250 rpm
Feed 1 - 400 mm/min
Table load 5 tons
Power: 15 kW
Weight- 17 to
 
Price  
  BG   request
119579610 101

STANKO-WMW NS3A for sale


table length: 3600 mm table width: 3600 mm table load: 50 t table travel: 2000 längs / longitudinal mm table height over floor: 1350 mm table speed: ca. 1000 mm/min table rotating: 360 ° total power requirement: 14 kW  ...

 
table length: 3600 mm
table width: 3600 mm
table load: 50 t
table travel: 2000 längs / longitudinal mm
table height over floor: 1350 mm
table speed: ca. 1000 mm/min
table rotating: 360 °
total power requirement: 14 kW
weight of the machine ca.: 38,5 t
dimension machine [...]: 5,5x3,7x1,4 m
space requirements of the machine approx.: 6,2x3,7x1,4 m
Rotary Table has been mechanically and electric overhauled.
equipped with a digital measuring system (DRO) for x-travel and rotation
control via control panel
Table clamping plate 14t weight - Table load 50t
11 pcs T-slots according DIN 650:
a=42mm
h=75mm
b=70mm
c=31mm
 
Price  
    request
806141 103

STANKO 6M616F11 for sale


Planner type Milling machine STANKO 6M616F11 Technical characteristics: Table’s width, mm 1600 Table’s work area length (L), mm: - basic version 5000 Table travel, mm L+600 Maximum weight ob machined detail (fo ...

 
Planner type Milling machine STANKO 6M616F11
Technical characteristics:
Table’s width, mm 1600
Table’s work area length (L), mm:
- basic version 5000
Table travel, mm L+600
Maximum weight ob machined detail (for 1 meter of table’s length), kg 6300
Maximum distance from table’s work area to spindle front face of vertical head sliding bar, mm 1275
Vertical head stroke, mm 1000
Distance from table’s work area to cross bar, mm 1150
Distance from the centre of table to the stand, mm 1150
Maximum width- 2300 mm between the stands
Vertical head run along cross bar, mm 3150
Distance from the centre of table to bolt-on head horizontal spindle face, mm:
- maximum 1275
- minimum 0
Distance from the centre of table to attachment head horizontal axis, mm:
- maximum 1000
- minimum 0
Main drive motor capacity (spindle rotation), kWatt 37-45
Maximum spindle torque, kNm 5
Spindle rotation frequency, RPM 10-2000
Overall dimensions, mm:
- length (basic version) 15500
- width 6900
- height 5800
Weight, kg 65500

Milling heads:
-on the main support there is 1x Vertical head, 1 x rotary Vertical head
-side of the table- extra Horizontal head, located on a hydraulic cylinder (like it was already explained below). The same automatically could be coupled to the first one.
 
Price  
  BG   request
119579376 103

STANKOIMPORT RT 400 for sale


table diameter: 400 mm table height: 140 mm rotation movement: 360 Grad passage: 31 mm weight of the machine approx.: 110 kg space requirements of the machine approx.: L:0,5xB:0,68xH:0,14 m T-Slots: 5xlongitudinal+1xtran ...

 
table diameter: 400 mm
table height: 140 mm
rotation movement: 360 Grad
passage: 31 mm
weight of the machine approx.: 110 kg
space requirements of the machine approx.: L:0,5xB:0,68xH:0,14 m
T-Slots: 5xlongitudinal+1xtranverse
a=14mm
h=22mm
b=25mm
c=10mm
 
Price  
    request
 page 1 
You didn't find your wanted machine?   to all dealers(no registration necessary)
More STANKO models (2 or more machines):
STANKO 1525 (2)
STANKO 1550 (2)
Stanko 16 K 20 (2)
STANKO 165 (2)
Stanko 1L532 (2)
STANKO 1M65 (2)
STANKO 2A635 (2)
Stanko 3G71 (3)
STANKO 5 M 150 P (2)
STANKO 5342 (2)
STANKO 5A122 (2)
STANKO 5B150 (2)
STANKO 745A (2)
STANKO 7B57 (2)
Stanko CNC Model (4)
STANKO Schraubstock (2)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

Eccentric Press STANKO KO 134


Overrun time: 386ms, overrun time: 78mm, safety distance: 650mm.

Lathe STANKO 1K 62


Center height: 200mm, max. workpiece dimensions over bed: 400mm, max. swing over support: 220mm, max. bar diameter: 45mm, max. turning length: 1000mm, rotational speed: 12.5-2000/min, feed rate x/ y-travel: 0.035-2.08/ 0.070-4.16mm, spindle bore: 47mm, length: 2712mm, width: 1324mm, height: 116mm, weight: 2.4t.

Horizontal forging machine STANKO V1134, 250 ton


Max. diameter of initial blank: 30 mm Blank length: -Min.: 120 mm -Max.: 300 mm Max. diameter of upset flange: 60 mm Upset slide nominal force: 2500 kN Max. force on clamping slide with dies closed: 2500 kN Stroke: -Movable die: 100 mm -Upset slide (full): 220 mm -Die closing: 140 mm Slide strokes per minute: 45 Machine overall dimensions: -Length: 6050 mm -Width: 4600 mm -Height: 2260 mm Machine weight: 24680 kg

Boring Mills STANKOIMPORT 2L614


Boring machine STANKOIMPORT 2L614 produced in 1978. The machine is equipped with measuring, and has upgraded partly electronic. Technical data of boring STANKOIMPORT 2 l 614: -spindle diameter: 80 mm -table dimensions: 800 x 1000 mm -the maximum workpiece weight: 1000 kg -spindle speed: 20-1600 min -engine power: 4.5/6.7 kW -dimensions of the machine: ok. 4300 x 2200 x 2800 mm -weight: 7000 kg

Hob milling machines STANKOIMPORT 53A30P


Hobbes STANKOIMPORT 53A30P built in 1993. Technical parameters of the milling STANKOIMPORT 53A30P: -maximum cutting diameter: 320 mm -milling length: 220 mm -Max. module: 6 mm -the maximum tilt angle: +/-60 ° -the maximum cutter diameter: 160 mm -overall dimensions: 2300 x 1300 x 1950 mm -weight: 6000 kg

Spline Shaft Grinding Machines STANKO 3451B


Profile grinder 3451B produced in 1980. Technical data 3451B Sanders: -the maximum diameter: 300 mm -the maximum diameter of grinding: 125 mm -minimum diameter of grinding: 25 mm -length: 1500 mm -grinding length: 1350 mm -weight: 6200 kg

Pneumatic air forging hammer STANKOIMPORT MA 4129 A


Jackhammer STANKOIMPORT is 4129 and was produced in 1986. Sledgehammer compressor STANKOIMPORT is 4129 A-technical data: -the impact: 63 tons

Roll Bending Machines STANKOIMPORT IB 2222 V4


Rolling 3-roller for sheet metal STANKOIMPORT IB 2222 V4 16X2000 was built in the Soviet Union in 1984. Trójwalcowa sheet metal rolling mill has a mechanical drive, the yoke of the upper roller is also opened with gears. Technical data winders STANKOIMPORT IB 2222: -width: 2000 mm -rolled sheet thickness in bending: 16 mm -the thickness of rolled sheet at podginaniu: 12 mm -the smallest bending radius: 240 mm -bending speed: 7.7 m/min. -the diameter of the upper cylinder: 270 mm -overall dimensions (l x w x h): 4040 x 2020 x 1745 mm -weight: weight (without Cabinet): 9800 kg -DTR-technical-functional in Polish and Russian Fight for sheet metal bending are intended 2222 IB STANKOIMPORT cold rolled and tapered ring segments of the sheet with a yield T = 250 MPa (25 kG/mm2).

Carousel Turning Machines (Lathes) CONDOR KROMERIZ STANKO 1516


Maximum diameter of folding support: 1600mm Maximum turning diameter by side support: 1600mm Maximum workpiece height: 1000mm Max. workpiece weight at revolutions of the clamping plate 4-125ot / min 6000kg 150-200ot./min. 2400 kg Number of steps for horizontally adjusting the support: 18 Feed rate range for adjustment: 5-1840 m.min Number of slides for slide: 18 Slide displacement range: 0.03-12.5mm / revolution of the clamping plate Number of positions of the turret head: 5

Eccentric Presses STANKOIMPORT KD 2330


Eccentric press STANKOIMPORT KD 2330 was built in 1980. Characteristics of the press STANKOIMPORT KD 2330: -nominal pressure: 100 t -table dimensions: 850 x 560 mm -adjustable slider stroke: 10-130 mm -the number of jumps the slider: 95/min -adjust the distance between the table and the slider: 10 mm -the maximum distance between the table and the slider in the lower position the slider at the maximum stroke: 400 mm -the distance from the axis of the slider to the press corps: 320 mm -distance from the press table to guides: 550 mm -the distance between the uprights in clearance: 400 mm -the angle of the body: 10 degrees, 20 degrees, 30 degrees -dimensions of the machine: 1745 x 2360 x 3180 mm -weight: 8650 kg

Carousel Turning Machines (Lathes) Stanko 1525


in working condiiton

Horizontal Boring Machine STANKO 2A637GF1 , Ø160mm


spindle Ø 160mm., table 1600x1800mm , X 2000mm., Y 1600mm., Z 1000mm., longitudinal travel 1600mm., weight 36,35 ton.

Single Column Eccentric Press STANKOIMPORT KE 2130


Nominal force: 1000kN, stroke: 10-130mm, stroke speed: 45/min, max. table ram distance: 400mm, weight: 9.5t.

Eccentric Press STANKOIMPORT KA 2128 K


Pressing force: 630kN, weight: 5.5t.

Vertikal Turning Machines (Lathes) Stanko Ø8000 x 3240 x 125 T


Technical characteristics. The largest diameter of the workpiece - 8000 mm The greatest height. workpiece - 3240 mm The diameter of the disc table - 7100 mm The biggest shift sliders rests vertical (right and left) - 2000 mm The highest levels of vertical travel of the slides (right and left) - 4400 mm Mileage axis slider slides off the center of the shield handle - 150 mm Vertical rotation angle bracket right - -15 ° - 30 ° Vertical rotation angle bracket left (combined) - -15 ° - 30 ° Sliding horizontal slider bracket side - 1250 mm Vertical travel of the slider carriage side - 2,800 mm Maximum weight of the workpiece at a speed table to 15.5 rev / min - 125 tons Maximum weight of the workpiece at any speed - 63 tons The speed range of the table - 0.23 - 19,3obr / min * The largest total cutting force - 160 kN The biggest moment of cutting - 400 Nm Range of feed carriages vertical and horizontal - 0.0352 - 275mm / min The feed rate accelerated sliders and carriages - 2400 mm / min The speed of the beam - 300 mm / min Main engine power - 25 kW Lifting capacity of the crane - 75 ton Suport combined (slide left) Boring spindle diameter - 125 mm Spindle stroke - 1000 mm Maximum torque of the spindle - 3500 Nm Spindle speed n - 20 - 650 r / min Number of degrees of speed spindle - 16 Max-min vertical feed spindle - 0.0352 - 215mm / min The rate accelerated feed spindle - of 2400 mm / min Shift the slider to slide in the y-axis - 2000 mm Feed range slider and bracket Min - 0.0352 mm / min Max - 285 mm / min The feed rate accelerated slider and slide - 2400 mm / min The greatest strength of the cutting blade when running from the front bracket L <= 1000 mm - 80 kN L <= 1700 mm - 50 kN L <= 2300 mm - 30 kN The extreme angles of rotation slide - -15 ° - + 30 ° The electric motor drive main spindle - 10 kW Max spindle feed force - 30 kN Cone Size spindle DIN 2080 - Metric 80

Fly Presses With Electro Mechanical Drive Stanko USSR F1730


Used forging screw press 100 tonns. Daylight: 510mm Slider travel: 260mm Table size: 510 x 560 mm Slider size: 440 x 460mm Power consumption: 9kW Weight: 6,2 tonns Mechanical parts in good condition, electrical cabinet incomplete.

STANKO 165 x 5000


Used Stanko lathe 165 x 5000 Swing over bed: 1000 mm Turning length: 5000 mm Main engine: 22 kW 3 x 380 volts Quill: MK 6 Weight: 14500 kg Accessories: 4 jaws chuck Quill Rapid traverse to all movements

Gear Fine Processing Machines Stanko 5B150


Max diameter of gears cut 800 mm Max module 12 mm Max cutter stroke 200 mm Saddle indexing gear diameter: 360 mm Axes distance (tool and table) 0-700 mm Largest tool diameter 200 mm Cutter arbor diameter 44.443 mm Taper M5 Table diameter 800 mm D ...

Horizontal boring machine STANKO 2A636F1 (Ø 125)


Specifications: Spindle Diameter of spindle mm Ø 125 Cone of spindle ?50 Main drive power kW 30 Rotational speed min-1 6,3 ... 1250 The greatest moment on the sliding spindle Nm 3500 The greatest moment on the milling spindle Nm 5200 (6000) *  ...

Knuckle Joint Forging Press PINSK- STANKO KB 8336


Knuckle Joint Forging Press PINSK KB 8336 400T YOM 1991, Mach No. 1001 Maximum force: 400 to Table dimensions : 500x500 mm Ram stroke, minimum: 130 mm Number of strokes per minute : 50 Distance between Plate Stamp & Slider: 475 mm Adjustment Bolste ...

Mechanical Press STANKO K3535


Mechanical Press K3535A STANKO Manufactured by Kalinin plant (Russia) YOMear of manufacture 1989 Capacity 315 t Ram stroke 400 mm Number of strokes per minute 25 Shut height 750 mm Ram adjustment 250 mm Table dimensions mm 2500 x 1250

Thread Grinding machine STANKO 5822M


Max dia workpiece 200 mm Max length worpiece 500 mm Grinding wheel 300..400 mm

Thread Grinder STANKO 5K822B


grinding diameter 200 mm grinding length 500 mm max. grinding wheel diameter 400 mm max. workpiece weight 30 kg

Horizontal Broaching machine STANKO 7A545


Horizontal Broaching machine STANKO 7A545 Nominal pulling force 63 tons Stroke of the working cylinder rod 2000 mm Speed of working stroke 1-7 m/min Feeding speed 11,2 m/min Withdrawal speed 18,8 m/min Speed regulation of the main motion is stepless ...

Horizontal Broaching machine STANKO 7A520


Horizontal Broaching machine 7A520 Nominal pulling force 20 tons Working stroke length 1600 mm Working table width 130 mm

Horizontal forging machine (Upsetter) Stanko Ryazan B1139, 800T


Capacity, ton 800 Movable die stroke, mm 180 Max. upsetting ram stroke, mm 380 Upsetting ram workstore, mm 250 Upsetting ram return stroke with closed dies, mm 130 Distance bentween upsetting ram and dies stroke forward, mm 140 Number of ram strok ...

Carousel Turning Machines (Lathes) STANKO 1M65


Used Stanko lathe 1M65 Well maintained and in very good condition Capacity: Pinol height: 500 mm Turning diameter over pastures: 1000 mm Turning diameter over cross-sled: 600 mm Turning length: 3000/5000 mm Spindle: Taper: Metric 100 Bore: 120 mm ...

Gear shaping machine STANKO 5A122


Max work piece diameter, mm 250 Module 0,2...6 Table area, mm 320 Table travel, mm: - internal shaping 260 - external shaping 350 Distance between table and spindle, mm 160...250 Gap diameter in the table, mm 65 Spindle taper, morse 5 Spindle spe ...

Gear Hobbing Machines Stanko 5342


MODEL 5342 YOM:1965 Max. Diameter of Wheel:300-2000mm(12"-79") Max. Module:20 Diam. of Working Table:1800mm(71") Max. loading on Table: 10 ton -with vertical cutting 560mm(22") -with radial cutting: 760mm(30") Max. Tooth  ...

Centre-Drive Turning Machines STANKO 1M 65


Used STANKO 1 m 65 lathe Swing over vanger: 1000 mm Swing of support: 600 mm Spindle bore: 85 mm Turning length: 2700 mm Incl. cooling water plants IMMEDIATE DELIVERY

Horizontal forging machine(Upsetter) Stanko Ryazan V 1136 , 400ton


Capacity, ton 400 Movable die stroke, mm 125 Max. upsetting ram stroke, mm 290 Upsetting ram work stroke, mm 190 Upsetting ram return stroke with closed dies, mm 60 Distance between upsetting ram and dies stroke forward, mm 100 Number of ram s ...

Sheet stamping press STANKO K3535A,315t


capacity 315 ton., table 1250x2500mm., stroke 400mm., shut height 750mm., number of strokes per min. 25, weight 50,9 ton

Mechanical Presses Stanko K3535A


Capacity, ton 315 Ram stroke, mm 400 Number of strokes per minute 25 Shut height, mm 750 Bed-to-ram adjustment, mm 250 Bed dimensions, mm 2500 x 1250 Bolster plate thickness, mm 180 Main drive motor power, kW 40 Press weight, kg 50900 Pr ...

Pneumatic air forging hammer STANKO MA417 (750kg)


Nominal weight of the falling parts: 750 kg Max. number of blows per minute: 105 Kinetic energy: 1900 kg Distance from an axis of the slider up to bed: 750 mm Cylinder diameter: 600 mm Diameter of the plunger: 630 mm Max. headstock travel: 835 mm D ...

Center Lathe STANKO 1M65


Centre distance: 3000m, rotational speed: 5-500/min, longitudinal/ cross feed rate: 0.20-3.05/ 0.07-1.04mm/U, number of gears for headstock: 15-114, gradient: 3-5mm.

Radial Drilling Machine STANKO 2M55


Column diameter: 315mmm, drilling sledge travel: 1300mm, rotational speed: 20-2000/min, feed rate: 0.056-2.5mm/U, spindle: MK 5, connected load: 4kW, length: 2665mm, width: 1030mm, height: 3430mm, weight: 4.7t.

Broaching Machines Stanko 7B57


power 40 tons max. leng 2000mm machine weight 15800kg

Turning Machines (Lathes) Stanko Samat-400S


Auction name: Boxmeer Metal in Beugen (1/2) Online auction Start of auction: 08 December 2017 09:00 GMT +0200 (Western Europe (DST) Closing time: 19 December 2017 15:50 GMT +0200 (Western Europe (DST) The price listed is an opening bid To p ...

Thread Milling Machines Stanko USSR 5350A


Machine in working condition. Max. working length 1000mm max. working dia. 500mm.

Mechanical Presses Stanko KV2536


Nominal force 400 t Slider stroke, mm 250 Slider strokes, spm 25 Shut height, mm 460 Distance adjustment between table and slider, mm 160 Slider size, mm 800 x 800 Table size, mm 1000 x 1000 Table gap size, mm 630 x 630 Bolster plate thickness, mm ...

Roll Grinding Machines Stanko HSh 4-31


Roll-End Face(angle) Grinding Machine Stanko HSh 4-31, 1981,max.dia 1000mm., max. length 2800mm,machine weight 30ton., Price 9500 EUR

Air steam double-acting Forging Hammer Stanko M2140 RAM 1000T


Impact energy, kJ 31.8 Nominal mass of the falling parts, kg 1000 Distance between guides in light, mm 500 Distance between guides in light, mm 500 Dimensions of the machine Lx Wx H (mm) 3000_1380_4830 Weight kg 30000

Hammer forging steamair double action arch type Stanko M212 RAM 2000kg


model M212 Impact energy, 50 kJ Nominal weight of falling parts, kg 2000 Stroke woman, mm 1200 Stroke woman, mm 1200 Machine dimensions Length Width Height (mm) 3650X1660X5310 Weight kg 58.310,

Stanko Moscow Carrousel 1531M


Auction name Containers, metal and woodworking machines in Giessenburg Public online auction. Start of auction: 20 October 2017 17:00 GMT +0200 (Western Europe (DST) Closing time: 2 November 2017 15:50 GMT +0200 (Western Europe (DST) The  ...

Stanko 1540


Stanko 1540 157 "Vertikale Bohrmühle Alter: 1985 EIGENSCHAFTEN: 2-schwenkbare vertikale Rams Taper Turning Attachment Tracer Attachment KAPAZITÄT: Tabelle Durchmesser ................................. 157.48 " Maximale Schaukel ........... ...

VERTICAL SLOTTING MACHINE STANKO D7410


Table diam: 1400 Slide stroke: max 1200 / min 300

Horizontal Forging Machines Stanko - Ryazan V


Horizontal forging machine(Upsetter) Stanko Ryazan V Manufactured by Tyazhpressmash (Russia) Year of manufacture 1985 Capacity, ton 400 Movable die stroke, mm 125 Max. upsetting ram stroke, mm 290 Upsetting ram work stroke, mm 190 Upsetting  ...

spiral-bevel and hypoid gear cutting machine STANKO 5A284


Gear hobbing machine for spiral bevel gears model 5A284 Manufacturer - STANKO Machine is intended for processing of bevel pairs - bevel gears with straight or helical teeth (ring gear and pinion gear). Tooth angle, deg 0-45 Range of application of the  ...

Plano milling machine STANKO 6625T


(Two wertical+two horizontal spindles) Table working area: 2 500 x 8 000 mm Max.height of workpiece: 2 500 mm Max.weight of workpiece: 65 000 kg Table travel: 8 500 mm Distance between columns: 3060 mm Spindle speeds: 20-1000 rpm Main ...

Horizontal Boring And Milling Centres For Cubical Stanko 2L614


Spindle dia 80 mm 11 kW Spindle 20-1600 rpm Face plate 6.3- 200 rpm Table 1000x800 mm Table 360 degrees Face plate 500 mm Spindle M5 X/Y/Z/W/U- 1000x800x1000x500x125 Feeding 1.26-2000 mm/min Weight 8500 kg Price 3500 EUR FCA Riga,Latvia
Find used machinery dealers in your country