We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Surface grinding machine make STANKO type 3 D 711 WF-11Fabr. -No: 1330, built in 1989Clamping surface of the magnetic plate: 630 x 200 mmTravel length: 700/670 mmTravel crosswise: 250/245 mmGrinding wheel size: 250 mmGrinding wheel speed: 2230 rpm.Distance spindle axis table: 80 - 550 mmVertical sanding adjustment: 80 - 550 mmLifting speed continuously stepless: 2 - 30 m / minCrossfeed stepless: 0.3 - 35 m / minCrossfeed stepless: 0.3 - 40 mmVertical adjustment stepless: 0.001 - 0.09 mmRapid traverse vertical: 0.3 m / minRapid traverse cross slide cross: 1.6 m / minDrive power: 4 kWOutside dimensions approx: 2500 x 1700 x 2000 mmWeight ca.:2,6 tWith- Magnetic disk- Cooling device with magnet ...
Surface Grinding Machine Fabr. STANKO Type 3 E 711 WFabr. -No: 6171, year of construction ca. 1985Clamping area of the table: 630 x 200 mmSchleifscheibendrm. min / max.: 160/250 mmGrinding wheel speed: 2680 rpm.Spindle axis table clamping surface distance: 80 - 445 mmVertical sanding adjustment: 365 mmLifting speed continuously stepless: 2 - 30 m / minCrossfeed stepless: 0.3 - 30 m / minVertical adjustment stepless: 0.002 - 0.08 mmRapid traverse grinding stick vertical: 0.3 m / minRapid traverse cross slide cross: 1.5 m / minDrive power: 4 kWelec. Connection: 220 / 380VOutside dimensions approx: 2000 x 1770 x 1920 mm highWeight approx: 3020 kgWith- Separate control cabinet- Suction- Hydrauli ...
Surface Grinding Machine Fabr. STANKO Type 3 D 722 WMake -No: 43432, built in 1987Sanding area: 1250 x 320 x 400 mmsm./lg. Distance spindle center - clamping surface Table: 190/630 mmTable clamping surface: 1000 x 320 mmsm./lg. hydr. Longitudinal adjustment of the table: 300/1050 mmClamping surface of the magnetic plate: 900 x 320 mmHeight of the magnetic disk: 120 mmgr. Vertical adjustment of the headstock: 440 mmGr. transverse adjustment of the wheelhead: 400 mmsm./lg. Outer diameter of the grinding wheel: 325/450 mmDrm. Grinding wheel bore: 203 mmGrinding wheel speed: 1500 rpm.Stepless longitudinal movement of the table: 2.0 - 40 m / min.infinitely variable feed of the headstock: 0.5 - 3. ...
STANKOIMPORT 5822M thread grinding machine was manufactured in the USSR. The machine is used for the process of grinding threads to give them the correct dimensions and roughness. During this process, a grinding wheel with a diameter of 400 mm is used to remove a small allowance from the workpiece, forming the thread shape on it. The grinding machine processes threads with a maximum diameter of 200 mm, a length of 500 mm and a weight of up to 30 kg. Depending on the choiceed disc, the diameter of the workpiece can be from 3 to 150 mm (grinding with a single-coil disc) or from 10 to 120 mm (grinding with a multi-coil disc). The total weight of the grinding machine is approximately 5 tons. ...
Max mass of drop parts 150 kgs. Price 3400 EUR ...
Single column - eccentric press, STANKO, K 1430 A - 100t BJ. 1985 Tech. Condition very good, - pressure: 100 t -Projection: 320 mm -Stroke: 10-130 mm -Mounting height: 400 mm -Table size: 850 x 560 mm x 100 mm -Tappet adjustment: 100 mm -Stroke: 50-53 / per min. -Machine weight: 8800 kg -Dimensions (W x D x H): 1.60 x 1.85 x 2.9 m Camshaft gear ROSS/Herion Herion valve Auxiliary brake DESCH Lutex ZB 200 Two hand release -transverse eccentric shaft and pneumatically actuated clutch / brake Komi nation -suitable for inlays in two-hand operation -secure setting -Single stroke, continuous stroke MOT testing in 04/2016
Cold stamping press Stanko P 0443 Capacity, tons: 2000 Nominal liquid pressure, kg/cm²: 320 Table size, mm: 1000 x 1000 Table stroke, mm: 500 Table speed, mm/s: 0,14 Rapid table speed, mm/s: 3,1 Distance between columns, mm: 1090 Shut height, mm: 800 Hydraulic drive motor, kW: 5,5 Voltage, V: 380 Frequency, Hz: 50 Press dimensions, mm: 2575 x 1500 x 3285 Press weight, kg: 27000 Price 21500 EUR
Max wheel diameter 800 mm Module + 10 Max. spindle speed 310 rpm Max. gear width 350 mm Motor power 7.5 kw Dimensions 2550 mm × 1510 mm × 2000 mm Weight 7,2 ton. ...
Spare parts for table drilling rig SVO / Stankoimport / Gertner, Fuhrmeister & CO Such as. complete drilling spindle SK50 (Please note the attached pdf-file with a drawing of the spindle) Ball roller spindles from the three axes Electric motors, feed motor 3x, main spindle motor complete control Siemens or control cabinet Control panel with digital device Glass mass Removable flat disc diameter 360mm Radial movement of the support of the flat disc 100mm Transformer / Transformer Angular drill head Sub-apparatus Spindle diameter 110 mm Tool holder ISO 50 Technical data of the original machine Travel laengs approx. 1,000 mm Cross-travel approx. 1,600 mm Vertical trav ...
Spare parts for Tischbohrwerk VO / Stankoimport / Gertner, Fuhrmeister & CO E.g. complete spindle SK50 Ball screw spindles from the three axes Electric motors, 3 x feed motor, spindle motor complete control Siemens or control cabinet Control Panel with digital device Glass scales Detachable faceplate diameter 360 mm Radial movement of the faceplate-support 100 mm Converter / transformer Angle drilling head Dividing head Spindle diameter ø 110 mm tool holder ISO 50 Technical data of the original machine Travel along approx. 1.000 mm cross travel approx. 1.600 mm of vertical stroke 1,000 mm Longitudinal movement of retractable spindle 710 mm Speed range 10-1,250 RPM Main ...