34201 offers

maximum number of results exceeded > 1000
please refine your search

Category: 103
item-No.: 126996474
Deckel Maho DMU 60 p 5 axis vertical machining center 99 ' -production year 1999 -CNC Heidenhain MillPlus -new, first owner copied -documentation in German -travel; X 600 mm Y 650 mm Z 550 mm -spindle speed: 20-12000 rev/min, 15 kW -no cooling through the spindle -chip conveyor -tool magazine-24 pieces -manual control panel-handwheel -technical condition of the machine: good -the type of fixing of SK-40 tools -delivery conditions: from the RAS Poland warehouse  ...
Category: 107
item-No.: 126999860
tube diameter: 15 - 70 mm wall strength: mm bending radius min.: mm total power requirement:2,5 kW weight of the machine ca.:1860 t dimensions of the machine ca.:3300 x 1200 x 2000 mm + 1200 x 800 x 600 mm bending angle max.:180 °
Category: 106
item-No.: 126991251
Nominal force: 630 t Stroke: 420 mm Number of strokes: 20/min Shut height: 900 mm Adjustment: 180 mm Bed: 1250 x 1250 mm Ram: 1000 x 1000 mm. Window in bed: 800 x 800 mm. Thikness of stamping plate: 180 mm. Bed`s height above floor level:400 mm. Press dimensions: -from left to right: 3280 mm. -from front to back: 3470 mm. -press height above floor level:6150 mm. Weight: approx. 51 tons
Category: 107
item-No.: 127000124
I - beam section - flat steel: mm I-beam section - upend: mm L-beam: mm total power requirement: kW weight of the machine ca.:90 kg dimensions of the machine ca.:600 x 600 x 1100 mm
Category: 701
item-No.: 126991249
2005
29.000 €
-
B 114 1 milk store tank with 300.000 l int No. KMT 16 Content 300.000 litre Manufacturer is Tankbau Gruß GmbH Manufacturer year is: 2005 Diameter is 4,26 m length: 24 m The groove of the tank is filled with light concrete Man whole on the side near the bottom of the tank electric content control measurements are installed with stirrer, installed slanting near the bottom of the tank with CIP equipment for the tank and for the stírrer insulated, outside covered with corrugated aluminium sheet. with r ...
Category: 101
item-No.: 126999202
x-travel:1050 mm y-travel:600 mm z-travel:530 mm table-size:1100x600 mm T-slots:18x5 (Breite x Anz.) mm max. table load:800 kg distance spindle center to table:100-600 mm rapid traverse in x-y-z axis:48/48/48 m milling feed range:1-12.000 mm/min spindle speed:10.000 1/min spindle taper:40 BT spindle drive:10 (Riemen) kW positioning accuracy: mm repeating accuracy: mm Tool changer:30 fach max. tool weight:7 kg tool diameter:89 (voll)/125 (leer) mm workpiece length:250 mm dimensions:2780x2500x2810 mm weight of the ma ...
Category: 401
item-No.: 126991247
1999
56.000 €
-
D 104 1 Miromatic bucket filling machine with lid foil sealing 1 lane for buckets from 1 to 10 kg Capacity by 10 l buckets. approx. 360 buckets/h Manufacturer is: Fa. Miromatic Manufacturer year is: 1999 Mach. No. P295 Type: MDA-1-5/10-02 Working principle: The machine grab the empty buckets out of the magazine and bring the bucket in a headfirst position, that water and disinfection solution can be spayed into the bucket After this cleaning the bucket is going into the filling station, after  ...
Category: 106
item-No.: 126997362
pressure:800 t distance between columns:610 mm stroke:100 mm no. of strokes:45 /min distance table/ram, max. stroke up, adjustment up:460 mm table surface area:590 x 590 mm ram surface:550 x 430 mm ram adjustment:50 mm power requirement:22,0 kW weight:18,0 t Dimensions (WxDxH):2,0 x 2,8 x 3,2 m list price: in running function in our warehouse: German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:pneumatic ram counterbalance:pneumatic
Category: 106
item-No.: 126991245
Nominal capacity, ton: 400 Ram stroke, mm 240 Ram stroks per minute 25 Shut height, mm: 750 Adjustment of distance Between ram and bed, mm: 20 Bed dimensions, mm 1250 x 1000 Lower Knockout: Stroke, mm 240 Force, kN 500 Upper Knockout: Stroke, mm 15-20 Force, kN 160 Main drive motor power, kW 40 Overall dimensions of press, mm: Floor space 2500 x 2260 Height above floor level 4515 Mass, t,  ...
Category: 301
item-No.: 126997258
screw size:50 mm injection shot weight in Polysterol:321,6 g clamping force:1100 kN : INJECTION UNIT: screw size:50 mm max. swept volumne:354,4 cm³ injection shot weight in Polysterol:321,6 g/PS injection pressure:1.731 bar : CLAMPING UNIT: clamping force:110 t tie bar distance:620 x 385 mm mould hight min.:250 mm mould height max.:250 mm opening stroke:250 mm : CONTROL: microprocessor control:Unilog B4 screen text:deutsch / german Manual:deutsch / german : EQUIPMENT: robot interface:nein / no core pull:nein / no  ...
Category: 401
item-No.: 126991243
2000
52.000 €
-
D 105 1 Ammann ultra clean cup filling machine for 2 cups in one Cup, 120 g with Amman cup packaging machine with Ammann carton manufacturing machine with empry caron deliver plant with electronic cabinet manufacturer year is 2000 Capacity 7.200 cup per hour constructed as a long round cup filling machine Length of the machine with cup packaging machine is 14,9 m, breadth 2,35 m High included filling station pipe connection and cup magazine: 3,65 m Looking from the cup outlet against the running d ...
Category: 301
item-No.: 126997274
screw size:35 mm injection shot weight in Polysterol:142 g clamping force:1100 kN : INJECTION UNIT: screw size:35 mm max. swept volumne:156 cm³ injection shot weight in Polysterol:142 g/PS injection pressure:2.159 bar : CLAMPING UNIT: clamping force:110 t tie bar distance:470 x 470 mm mould hight min.:300 mm opening stroke:600 mm center hole:125/175 mm : CONTROL: microprocessor control:MC 3F screen text:deutsch Manual:deutsch : EQUIPMENT: robot interface:Euromap 12 core pull:1 x : OTHER DATAS: pump drive power:18, ...
Category: 109
item-No.: 126991239
Control Charmilles Travel X / Y / Z 320/220/320 mm C-axis Table size 560x400 mm 59-station Erowa electrode changer Robot X 17 Workpiece places Erowa ITS 148
Category: 301
item-No.: 126997294
screw size:40 mm injection shot weight in Polysterol:185 g clamping force:1250 kN : INJECTION UNIT:--- screw size:40 mm max. swept volumne:204 cm³ injection shot weight in Polysterol:185 g/PS injection pressure:1.860 bar : CLAMPING UNIT:--- clamping force:125 t tie bar distance:470 x 470 mm mould hight min.:300 mm opening stroke:600 mm : CONTROL: microprocessor control:MC 3F screen text:deutsch / german Manual:deutsch / german : EQUIPMENT: robot interface:Ja core pull:2 x : OTHER DATAS: pump drive power:18,5 kW to ...
Category: 702
item-No.: 126991237
Sponge Cake line capacity 70,000 per hr at 25gm in good condition MACHINE SERIAL NUMBER YEAR 1 GRINDING-DRYING WASTE SPONGECAKE GROUPS 3.33H 2 PREMIX- KNEADING MACHINE TONELLI +PC 3 PREMIX LIQUID + PC 4 BICOLOR SYSTEM + DRAINING MACHINE 5 TURBO EMULATOR GORRERI + PC 608401 2006 6 WHIPING PUMP CMAS 1604 2004 7 GRINDER GROUP 1996 8 SUGAR AND FLOUR DOSING GROUP EFP700-EP118.1 1996 9 TUNNEL OVEN IMA FORNI MT. 35,25+PC 3051 1996 10 COOLING CONVEYOR BELT IMA FORNI 250120 1996 11 OVE ...
Category: 401
item-No.: 126997146
capacity: 55000 Bottles/h max. filling pressure: 7 bar volume product-ring bowl: 550 l Power consumption: 25 kW weight: 19 t formats: bottle formats: 0,33 l Vichy-bottles, 0,5 l NRW-bottles, bottle diameter: 50-75 mm, bottle height: 150-330 mm Machine pitch: filling valves: 130, division of the valves: 87 mm, closure heads: 26, division of the closure heads: 87 mm Direction: right-left Operation / control: Siemens S7 Basic construction: 10 calotte feet equipment: Filling valves with integrated hot water scouring,  ...
Category: 301
item-No.: 126991236
OVERVIEW: Brand: Arburg Model: 320M 750-210 Application type: Injection Moulding Machine type: Injection Moulding Machine Availability: Immediately Construction year: 1997 Production hours: 52651 Location: Germany Origin country: Germany GENERAL DATA: Measurements width: 4300 mm Measurements depth: 1850 mm Measurements height: 3230 mm Machine weight: 2610 kg CONTOL UNIT: Brand: Arburg Model: Multronica CNC main language: German INJECTION UNIT: Stroke volume: 115 cm³ Injection pressure ...
Category: 702
item-No.: 126996736
include \r\nmoulder with pressure board\r\nsetting machine width 580 mm, max. length 2000 mm\r\n
Category: 106
item-No.: 126991235
1986
110.000 €
Land-ua UA
Technological view of stamping Stamping draft with torsion kN nominal force. 10000 internal effort slider kN.6000 effort outer slider kN. 4000 stroke frequency min. 90 mm stroke of the ram. 250 mm adjustment. 10 distance internal slider mm.435 external slider mm.655 Upper ejector stroke mm.15 effort kN.20 Lower ejector stroke mm.40 effort kN.180 Table 1000x1000 Dimensions, external slide from left to right 900 front to back 800 diameter of the inner slider 290 Power kW main drive ...
Category: 702
item-No.: 126996992
double-foil, L-sealer 550 x 550 mm,\r\nwelding bar automatic lifting/lowering\r\nadjustable\r\n conveyor speed \r\n sealing time adjustable\r\n temperatur\r\naccessories\r\n conveyor\r\n automatic bag opener
You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)