Type:nbsp;16B16P Distance between centers: 850 mm Swing over bed: 360 mm Swing over cross-slide: 190 mm Diametre of main spindle bore: 46 mm Power on main spindle: 7,5 HP  ...

• more information

Center height: 400 mm Center distance: 4000 mm Spindle bore: 110 mm MAKE   Stanko Russia TYPE     1 M YEAR    2003 SPECIFICATIONS Swing over bed Ø   830 mm Swing over cross slide   480 mm Distance between centres    4000 mm Work piece weight    4000 kg Spindle bore     110 mm Spindle speeds / ranges    1250 Rpm  

Capacity 250 ton Kinetic energy of moving parts at the end of max. ram stroke 13,5 kj Max. ram stroke 400 mm Number of ram stokes (SPM) 34 Slide clearance 560 mm Ram size (front-back 560 mm Table size 670 x 750 mm Lower ejector capacity 16 ton Lower ejector movement 105 mm Main drive motor powe 15 kW Press dimensions 3710 x 1925 x 4415 mm Press weight 18000 kg

Capacity 250 ton Kinetic energy of moving parts at the end of max. ram stroke 13,5 kj Max. ram stroke 400 mm Number of ram stokes (SPM) 34 Slide clearance 560 mm Ram size (front-back 560 mm Table size 670 x 750 mm Lower ejector capacity 16 ton Lower ejector movement 105 mm Main drive motor powe 15 kW Press dimensions 3710 x 1925 x 4415 mm Press weight 18000 kg

Manufacturer | Manufacturer: Stanko Type | Type: 16k20 Stock Number | Stock Number: 0980 Year of construction | Year of manufacture: 1978 Turning length | Turning length: 1000 mm Swing diameter over bed | Swing diameter over bed: 440 mm Spindelbohrung Spindle bore: 50 mm RPM | turning speed: 12.5 - 1600 rpm Tension | Voltage: 380 V Engine power | Drive power: 10 kW Dimensions (LxWxH) | Dimensions (LxWxH): 2800 x 1200 x 1800 mm Weight Machine | Weight of machine: 2,5 t

Stanko 16K25 Distance between centers: 2000 mm Swing over bed: 500 mm Swing over cross-slide: 290 mm Diametre of main spindle bore: 52 mm Number of speeds: 12,5 - 1600 rpm Digital screen: Yes Length: 2795 mm Width : 1240 mm Height: 1500 mm Weight: 3095 kg Max weight between centers: 1800 kg

Universal milling head, milling adapter, milling extension, angle milling head -Spare part: from a Stankoimport milling machine -Milling head: with quill -Recording: Exit -Recording: Entrance -completely swiveling -impact head -Equipment -Pitch circle -Dimensions: 1200/800/H300 mm -Weight: 200 kg -Sale only in full

Nominal force, kN 1600 Slider stroke, mm 320 Distance between table and slide, mm 320 Distance between table and slide, mm 320 Main drive motor power kW 16 Table size width / length mm 580/650 Machine dimensions Length Width Height (mm) 2560_2020_3840 Weight kg 11000  ...

• more information

Turning diameter over bed 630 mm, center width 3000 mm Speed range 10 - 1250 rpm Feed range longitudinal 0.06 - 1.4 mm/rev, transverse 0.024 - 0.518 mm/rev Spindle passage 65 mm Main drive 15 kW Incl. fixed bezel D approx. 390 mm Rapid traverse 3-B lining,  ...

• more information

Single column - eccentric press, STANKO, K 1430 A - 100t BJ. 1985 Tech. Condition very good, - pressure: 100 t -Projection: 320 mm -Stroke: 10-130 mm -Mounting height: 400 mm -Table size: 850 x 560 mm x 100 mm -Tappet adjustment: 100 mm -Stroke: 50-53 / per min. -Machine weight: 8800 kg -Dimensions (W x D x H): 1.60 x 1.85 x 2.9 m Camshaft gear ROSS/Herion Herion valve Auxiliary brake DESCH Lutex ZB 200 Two hand release -transverse eccentric shaft and pneumatically actuated clutch / brake Komi nation -suitable for inlays in two-hand operation -secure setting -Single stroke, continuous stroke MOT testing in 04/2016