spragelse used for sale

This SPR 320 machine is ideal for flattening and equalizing various meats, such as cutlets, döner kebab, whole muscle products and custom-made products. The space available in the production was taken into account by a two-stage arrangement of the strips. The meat is placed on top, then lowered between the strips to come out flattened on the same side at the end. This means that the installation space of the machine could be reduced by half for the same efficiency. The plant's production is around 1,500 cutlets/hour and can therefore also meet ambitious requirements. Characteristics of the machine: Type: SPR 320 Year of manufacture: 2012 Weight: 380 Kg. Power: 1,163 kW. Voltage: 400 V. Frequency: 50 Hz. Amperage: 3.687 A.

100hl Complete Brewery Location: UK SCADA Controlled 100HL SPR UK brewery capable of 3 brew cycles per day Mash Conversion Vessel Lauter Tun Copper Kettle Whirlpool Porteus Mill System Scada Control System 100hl FV x 4 200hl FV x 3 200hl MV x 6 200hl Bright Beer Tanks x 2 50hl Rough Beer Tanks x 2 50hl Bright Beer Tank FV 50hl Schenk Filtration System Yeast tanks x 5 CIP System x 2 Heat Exchanger x 5 Stainless Steel mixing tanks Stainless Steel buffer tanks Spirax Condensate recovery x 2 Babcock Wanson Steam Generator Abac Air Compressor Water Treatment Plant Various Stainless Steel Pumps Laboratory Equipment CO2 Tank Glycol Chiller

5 piece round timber sorting fields, make JUMPER, almost like new condition. Current series, built in 2007! Suitable for round timber length 3,0-5,0 m. With electric output er motor 3.0 kW. Reverse loading ready.

9 kW ; 8 bar; 110 °C max. temperature; 1 tank; without pistol

For sale is a complete frame sawmill as listed below. (Single sale also possible, please register in advance) An annual cut of up to 60,000 solid cubic metres of round timber is possible with the system. With a log length of 4 metres, the current annual cut is approx. 30,000 solid cubic metres in 1-shift operation. The facility is still in operation and can be visited by appointment. Machine Listing: 01. Log feed 4-strand SPRINGER with separator with roller conveyor with log turner with insert 02. Clamping carriage remotely controlled ESTERER Type: FHZ SV Built in 1990 Track width: 110 cm with auxiliary wagon with cabin 03. Frame saw ESTERER Type: HDS Built in 1973 600 stroke max. passage 71 cm with splitting wedge with drive motor 132 kW with front gear with hydraulic saw clamp with saw blades with hook-up 04. Frame roller conveyor Mayrhofer w ...

USED STAINLESS STEEL SPROUT-WALDRON 10 DRYER REF.: C6846 General characteristics: Manufactured by SPROUT-WALDRON Model 10 Material Stainless steel Weight 510 kg Motor characteristics: Rotational speed 910 rpm

Wire belt with FU, Cabinet Make: Sprematec Length: 1000 mm Width: 600 mm

Timber sorting plant brand "SPRINGER", built in 1992 with additions built in 2003. Very good condition. Combi system with 9 pieces Schräetagen and 3 piece horizontal layers days. Robust powerful stack machine. . Wood length 2.7 to 5.3 m facility complete with entire steel base, complete hydraulic and control system with control panels. Plant no longer in operation, immediately available

After cooking stove, thermal oil, Formcook, frying line (CFS, GEA, Koppens, Alco, Stork) - serial: Sprematec - length: approx. 10 m - width: 1350 mm inside / 1518 mm outdoor - heated thermal oil - year: 10/2003

Lake mixer / Mixer -Manufacturer: Sprematec -Condition: presentation machine / demonstration system -Size: 120 L

L-conveyor belt / conveyor belt / robe / L-band / Transportation belt -Manufacturer: SPREMATEC -Working width: approx. 305 mm -horizontal area: approx. 1.5 m + 45° kinking -rising area: approx. 4.43 m -Adjustment gear -Plastic link conveyor belt with 2" high catch all 300 mm (Intralox/Habasit/Ammeraal)

For sale is a laminating resin system from IMT SpraySystems. The plant is in very good condition, it has been properly shut down by personnel of the machine manufacturer and filled with mesamol for protection. New price of the system is 85000.-€. The system was cleaned and visually prepared. Circuit diagram, operating instructions and maintenance overview are available. The systems were regularly inspected by the manufacturer as part of a maintenance plan. Applications: Wind power (offshore and onshore) Shipbuilding Lightweight construction Automobile industry Railways (e.g. for the sealing of track beds) Aircraft construction (especially for the construction of the individual components) Corrosion protection Concrete renovation Chemical Resistant Equipment Wastewater (especially in the sewerage system) On request, at an additional cost, the machine can undergo factor ...

Turret Lathe Fabr. SPRINT Type T.R. 26Fabr. -No: 556Technical specifications:Center height: 125 mmdistance between centersSpindle bore: 30 mmBed length: 700 mmBed width: 140 mmMax. Distance Turret tailstock / spindle: 400 mmSpindle speeds: 140 - 2830 rpmExternal dimensions Length x width x height: 1500 x 800 x 1600 mmWeight approx: 700 kgWith- Spangenangeneinrichtung- Revolver stick- Cooling deviceused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Sprematec baking system BASE CONE 212 / 69 / 16 for roll production - Condition: Demonstration system - Number of baking plates: 69 pieces - Baking plate size: 212 mm - Product size: D= 20 x 48 mm - incl. succession line

Sprintus_Industriesauger Craftix 35 M Product name: Industrial vacuum cleaner Type: Craftix 35 M Manafacture: Sprintus Article number: 118.030 Year of construction: 03/2023 Condition: Brand New Technical details: - Mains voltage: 220-240 V / 50-60 Hz - Power: 1,200 W - Sound pressure level: 75 dB(A) - max. vacuum: 250 mbar - Volumetric flow: 74 liters / sec. -Plastic containers - Container volume: 35 litres (gross) - Power cord length: 10.0 m - Suction hose length: 5.0 m - Suction hose diameter: 35 mm - Diameter intake manifold: 38 mm, 2.50 m - Weight: 16.0 kg - Dimensions (LxWxH): 54 x 39 x 63.5 cm Equipment: - Stainless steel intake manifolds, 2 x 0.5 m - Dry floor nozzle 450 mm - Crevice tool - Round brush - HEPA 13 cartridge filter - Power tool adapter 35 mm diameter - Power tool adapter 21, 25, 32 mm diameter - Non-woven filter bag - Disposal bag  ...

SPREMATEC – FLA 36 baking system for flat wafers Condition: Demonstration system Number of baking plates: 36 pieces Baking plate size: 460 x 290 mm

SPREMATEC – Dough mixer 210 L – Semi-automatic Condition: Demonstration system Size: 210 L usable volume with control Pump for emptying

SPREMATEC – dough mixer 210 L – on weighing rods Condition: Demonstration system Size: 210 L usable volume on weighing rods

SPREMATEC – Baking system SPM 30 for cast wafer products Condition: Demonstration system Number of baking plates: 30 pieces Baking plate size: length: 390 mm, width: 2 x 55 mm for cast waffle cones other poured waffle products are also possible on request incl. discharge belt and packing tray

Painting module Gun Driver Module -Type: Spraymation 305910-2 -50 VDC -Price: per piece -Number: 2x available -Weight: 0.8 kg

Sprout Matador Feed expander. Comes with 250kw motor and feeding conditioner.

Round timber yard Springer (noisy. Layout) Consisting of log feed 4 strands Separation Depositor Bruks Reducer Crane Blochzug Surveying 3D Speaker Metal detector Mesutronic Debarking Nicholson A5 /27 inch AIRSEAL ! (Rotor new!) Cross conveyors 2 cross-cut saws 66 sorting boxes each 2 sorting lines of 33 boxes each

Presentation machine Band width: 600 mm

Condition: presentation machine Size: 120 Liter usable Volume - with control system - with pump to empty out

Condition: presentation machine Size: 160 L usable Volume - with control system - with pump to empty out

Conical roller duct with 6 cone rollers, length x roll width = 6,000 x 800 mm tapered roller conveyor with 6 pcs. rolls; length x rolls width = 6,000 x 800 mm

slicer for curry sausage bandwidth: 300 mm, cuts for 12 mm construed.

Condition: Presentation machine Size: 120 Liter usable volume

Stack machine for lumber length 2.0 m to 5.5 m plant suitable for the formation of stack widths of 1.0 m to 2.0 m heavy duty for double packages with intermediate lift table. System Board separation, registration, user location clamp, rotating tongue, Zwischenhubtsich and package cross conveyor. Complete with control. Stacking machine for timerlength of 2.0 up to 5, 5 m. Heavy duty style for double package 1.0 m up to 2.0 paketwidth! Complete equipment from unscrambler, even ending roller conveyor, layerbuilding with hydraulic stopper lifting table for double package including stacking unit in between.

External task for double packages 1.0 m to 2.0 m able width. Heavy duty tilting table for double packages, infeed conveyor, tilting table, complete manipulation of lath, cross conveyor, complete control

We sell a sort block with 17 bins including sorting conveyors, 17 bins with pre - and main sorting conveyors as well as the deloading conveyor. With complete steel substructure with Hall. Timber sorting block type "Schichtetage" with 17 bins with pre-and main sorting conveyor including sorting conveyor, conveyor 17 bins and moveable deloading conveyor. Steel construction included

Round timber Sorting conveyors make JUMPER. 43 sort fields right and left 3-5 m length of wood. Drive unit with 2 x 75 kW. From Boxer electrically with each 3.0 kW. 2 x kW frequency converter FIG. 90 each. Steel base with 2,600 mm. sorting chain conveyor height 1 year old! Plant until April 2017 in use to visit! Built in 1997.

Package press and strapping system make FROMM with 19 mm Plastic tape, with timber insertion, package roller before the press, bar patrons and cross conveyors, package delivery sponsor behind the press. (Driving with and without timber is possible!) Complete control with Control Panel, hydraulic power pack. Very good condition, used little! Year of manufacture 2004

After cooking stove, thermal oil, Formcook, frying line (CFS, GEA, Koppens, Alco, Stork) - continuous grilling line - Total length outside: 6 m - Total width: approx. 1.300 mm - Height of the gallows: 1.200 mm - Gallows for chain hoist - 5 floors above each other - Conveyor belt of wire belt: 600 / 2,35 / 7 / 12,7 - Double-walled floor and hood, isolated

) for double pot MAKO-DT/130 ) with two drills ) incl. automatic Mittelbohreinstellung ) Cycle time per frame is less than 15 seconds ) Clamping and centering device with pneumatic cylinders, which are vertically and horizontally ) this machine streamlines the beating of wood window

A frame press was made in 1992, we bought this equipment in second hand condition, but we havent used it ourselves.

- Belt widths: 400 mm / 600 mm / or on request - for the wrapping of food - Baking dough is then fried crispy - Demonstration system - (figure similar)

Moulds descaling system, containers for molding / injection moulding tools descaling, with pump pressure reducer valve control, With hoses. Connection to 230 VAC . Plant Runs in circulation .

Control: On-screen control; Power: 2,720 watts; Temperature: adjustable from 20 to 95 degrees Celsius; Hose temperature: adjustable from 70-80 degrees Celsius

MANUFACTURER: Niro Atomizer CAPACITY: 1.183 Kg/h, , APPLICATION: Milk powder and whey powder production. MACHINE COMES WITH: External vibro fluid bed dryer, Niro F35 atomizer, powder cyclones, bag filters, air pre heating economizer unit, air heating unit with steam heat exchangers, vibro sieve powder calibration unit, air ventilators, air locks, rotary valves and many accesories...

Suction fan Slow runners D= 350mm Air capacity 6250m³/h

Working width: 3550 mm Working height: 2250 mm Number of cylinders: 5 St. S+S hydraulic frame press RP 1200 ------------------------------------- Working width 3,550 mm Working height 2,250 mm ------------------------------------- with medium pressure beam ------------------------------------- still in use ------------------------------------- Technical information according to the manufacturer - without guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1.Pipe belt conveyor RGFO 1200/900 x 37000 version with foldable upper half, clamping station manual, drive approx. 11 kW, with scraper, 2 level monitors, Hopper and transfer hopper built in 2011 2. Vibrating screen 3 levels / 3 sqm, motor 3 kW 3. Screw conveyor 3 x 500 mm, motors 3 x 7.5 kW

Conveyor width: 600 mm Cut by knife cylinder Cutting width 7,0 mm Supply and unloading conveyor Machine dimensions in cm: Width: 120,0 Length: 170,0 Height: 130,0 Voltage: 400 V, 50 Hz

Cleaning machine/rack trolley washer/dishwasher/chamber washer Year of construction 2002 with 5 different washing programs with drive-in ramp Rack trolley cleaning system 1000x600mm complete stainless steel

Frame press, gluing press -operated: hydraulic -Working area up to: 3500 x 2400 mm -Wood clamping: pneumatic -Display dimensions: 4200/1100 / H3700 mm -Transport dimensions: 4200/1200 / H2300 mm -Weight: approx. 3500 kg

The HPB type paddle mixer is a batch mixer for mixing powder and granules. What characterizes the mixer is the accuracy of mixing and the short mixing time. With injectors for liquid through a nozzle tube that makes it possible to add a maximum of 3 liquids. The nozzle pipes are insulated with pipes installed for hot water. The nozzles are cleaned automatically by a pneumatic system.

1. LIQUID SPRAY BOOTH The spray booth is designed for ventilation and filtering of paint overspray during manual painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during paint application. The filter wall is manufactured modularly from galvanized sheet metal panels and the extraction fan is placed on the upper part of the filter wall and choiceed with plastic propeller to prevent the risk of spark formation. The electric motor is placed outside the extraction duct and there is no direct contact of the motor with the polluted air. FILTRATION SYSTEM The extraction filter is on the back surface of the spray booth filter wall and is used in 2 stages with 99.9% efficiency. In order to increase filtration efficiency, cardboard filter and paint stopper fibreglass filter are used as 2 separate layers. The warning lamp on the control panel indicates th ...

1. LIQUID SPRAY BOOTH The spray booth is designed for ventilation and filtering of paint overspray during manual painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during paint application. The filter wall is manufactured modularly from galvanized sheet metal panels and the extraction fan is placed on the upper part of the filter wall and choiceed with plastic propeller to prevent the risk of spark formation. The electric motor is placed outside the extraction duct and there is no direct contact of the motor with the polluted air. FILTRATION SYSTEM The extraction filter is on the back surface of the spray booth filter wall and is used in 2 stages with 99.9% efficiency. In order to increase filtration efficiency, cardboard filter and paint stopper fibreglass filter are used as 2 separate layers. The warning lamp on the control panel indicates th ...

1. LIQUID SPRAY BOOTH The spray booth is designed for ventilation and filtering of paint overspray during manual painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during paint application. The filter wall is manufactured modularly from galvanized sheet metal panels and the extraction fan is placed on the upper part of the filter wall and choiceed with plastic propeller to prevent the risk of spark formation. The electric motor is placed outside the extraction duct and there is no direct contact of the motor with the polluted air. FILTRATION SYSTEM The extraction filter is on the back surface of the spray booth filter wall and is used in 2 stages with 99.9% efficiency. In order to increase filtration efficiency, cardboard filter and paint stopper fibreglass filter are used as 2 separate layers. The warning lamp on the control panel indicates th ...