spotting presse used for sale

Pressing force: 40 t table size: 670 x 470 mm plunger surface: 670 x 470 mm clearance between the pillars: 620/470 mm gr. Height: 740 mm Preß speed: 20 mm / s rapid traverse: 50 mm ejector force: 3T Electr. Supply: 380 V, 9.5 kW space: 2200 x 1875 x 3000 mm weight: 2400 kg

2886: 1 gebr. Difiting press 200 kN Fabr. REIS, type TUS 60 OK 20, Bauj. 1991 with hydr. Control Arb.-Ber.: Stroke approx. 700 mm, drive power: 7.5 kW Accessories: extendable table 670 x 570 mm, swing-out top plate 670 x 570 mm, Mounting height 740 mm Other: Passage between the columns 620 mm, Space requirement L/W/H 1870 x 1620 x 3000 mm, Weight approx. 3.5 tons. very good condition

Capacity: 30 t Bed length: 980 mm Bed width: 850 mm Stroke: 600 mm Day light: 920 mm SPECIFICATIONS Hydraulic / Mechanical   Hydraulic Press force   30 Ton Table Length x Width   980 x 850 mm Throat  920 mm Die height  920 mm Stroke Length  600 mm  

Tuschier- and test injection press make REIS type TUS 60 A 10 HMachine -No: 177/66, built in 1966Table surface: 590 x 600 mmMax. Shaped area: 600 x 1200 mmMax. Mold height: 680 mmMax. Mold weight: 2.5 tStroke of the table: 500 mmEjector stroke: 200 mmEjector force at 100 atm oil: 2000 kgPressing force infinitely variable: 0 - 10 tControl capacity: 1/100 mmSwing radius of the upper swivel plate: 92 °Stroke speed stepless: 0 - 80 mm / sLoad capacity of the upper swivel plate: 1500 kgLoad capacity of the carriage plate: 2500 kgHeight of the column guide: 245 mmInjection volume: 2.5 lSpec. Spray pressure: 2 - 15 kg / cmDrive power: 5.5 kWHeating power: 1.2 kWAir connection: 2 - 15 atüDimensions L x W x H: 1420 x 1360 2810 mmWeight approx. 2300 kgWith- Test sprayer- Heater- ejector- swivel top plate m. hydr. locklittle usedPrice on request.Delivery: ex warehouse or location free loading tru ...

Spotting Press Fabr. REIS Type TUS 60 OK-40 HWMasch. -No: 693/73 built in 1973Press force: 40 tTable or size of the ram surface: 670 x 470 mmPassage between columns wide / long side: 620/470 mmgr. distance between clamping surface and plunger: 740 mmRam stroke: 770 mmPress speed: 20 mm / sRapid traverse: 50 mm / sOpening speed: 34 mm / sEjector force: 3 tEjector stroke: 200 mmHydraulic drive: 380 V, 9.5 kWSpace required including space for aussfahrb. Table and pestles: 2200 x 1875 x 3000 mmWeight approx: 2400 kgWith- compl. electrical device- Control panel for the electrical system and hydraulics- Test sprayerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM ...

Spotting- and test injection press make REIS type TUS 60 AMachine -No: 791, built in 1974Max. Mold area: 600 x 1000 mmMax. Mold height: 727 mmMax. Mold weight: 2500 kgEjector force at 100 atm oil: 2000 kgPressing force infinitely variable: 10 tControl capacity: 1/100 mmSwing radius of the upper swivel plate: 92 °Load capacity of the upper swing-out plate: 1500 kgLoad capacity of the carriage plate: 2500 kgHeight of the column guide: 245 mmInjection volume: 2.5 lSpec. Spray pressure: 2 - 15 kg / cmColumn diameter: 80 mmDrive power: 5.5 kWHeating power: 1.2 kWAir connection: 2 - 15 atüDimensions L x W x H approx.: 1420 x 1360 2810 mmWeight approx. 2300 kgWith- Control panel- Test sprayer- Heater- ejectorused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We ...

Spotting Press Fabr. GUSTAV HESSMERT Type TSD 40Masch. -No: 125/85 built in 1985Pressing and clamping pressure: 20 - 400 kNRetraction pressure: 100 kNDischarge pressure: 5 - 40 kNOperating pressure: 200 barClosing speed: 0 - 17 mm / sec.Opening speed: 0 - 37 mm / sec.Press speed: 0 - 4.0 mm / sec.Usable table surface: 600 x 600 mmInstallation height: 600 mmRam stroke: 300 mmAustoßerhub: 150 mmDisplacement weight: 600 kgSwivel and rotary weight: 300 kgSwivel and rotation angle: 180 degr.Operating pressure: 250 barConnected load: 380/220 V, 4.0 kWWeight approx: 2,3 tWith- swivel head above- T-slot table 0.6 x 0.6 m- in 2015 renewal of the PLC control Siemens,xa0xa0 with new program recording and network connectionused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors ex ...

Spotting and test spray press make REIS type TUS 60 / 0K 20Machine -No: 19137/79 Year 1979Technical specifications:Press force: 20 tRetraction force: 10 tgr. stroke: 775 mmEjector force: 3.0 tEjector travel: 200 mmOperating pressure: 175 barTable mounting surface: 570 x 670 mmDistance between columns: 620/470 mmInstallation height: 740 mmPiston diameter: 120 mmDrive power: 7.5 kWtotal installed power: 9.5 kWDimensions L x W x H: 1900 x 1200 x 3100 mmWeight approx: 2300 kgWith- Test spray device- 2 hydr. sockets- separate control cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Item No. 5054: 1 gebr. Ink press 250 kN Fabr. MILLUTENSIL,

Technical details Pressure 110 t Technology Passage width 1200 x 1000 mm Stroke 1200 mm Machine weight approx. 12 t Space requirement approx. 4500 x 4300 x 2700 mm Master cylinder 1 piece Installation height (distance table to plunger plate) 1200 mm Table height 700 mm Table can be extended by 1200 mm Table tiltable by 45 degrees Upper tool folds down by 180 degrees Table rotatable by 180 degrees Table load max. 10 t Travel speed of the table 25 mm/sec Flow speed 195 mm/sec Return speed 130 mm/sec Working speed adjustable from 0 to 10 mm/sec. Table area between the columns 1250 x 1000 mm Engines WEG Accessories Paint structure RAL 7035 (light grey) Additional information Painting cladding, doors, maintenance balcony RAL 1021 (Yellow) Painting accessories RAL 7021 (dark grey) Columns and cylinders are made of tool steel SAE 1045 (identical to German standard C4 ...

Bottom table can be swivelled on both sides Upper table swivel: 90° Injection unit Clamping force: 18,000 kp Under table LxW: 1.200x9000 mm Top table LxW: 1.00x900 mm Overall dimensions LxWxH: 2.500x1.900x4.000 mm Price 4.500 EUR fixed price VAT excluding VAT Deployment FOB Location Baden-Württemberg, Germany Renting This

No. 5282: 1 Gebr. Spotting press 400 kN Fabr. RICE Type TUS 90 OK 40 Passage 930 x 705 mm Table top 900 x 1280 mm Plunger plate 900 x 1200 mm Installation height 1035 Space requirement approx. 3 x 2 x 3.6 m Transport dimension approx. 4 loading meters, Width 2.20 / height approx. 2.80 Weight approx. 8 tons Still ex works Cologne

Key data: 40 t, 1000 mm, 590 mm

Machine Type: Hydraulic Spotting Press / 4-Column Press / Tool Testing Press Manufacturer: REIS Model: TUS 60 OK - 40 H Year of construction: 1979 Condition: good Offer Type: Used Machine Specifications: Compressive force: 40 t Projection: Passage between columns: 490 mm Table: 1000 x 590 mm, movable Installation height: 940 mm Propulsion: 7.5 kW Remark: Swivel unit for upper plate Weight: 3500 kg The machine is in good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

Key data: 18 t

Specifications: Clamping force 18 tons Opening force 20 tons Adjustable force in each case Lifting speed adjustable approx. 0 - 1 m/min Extendable table size 800 x 660 mm Installation height min 230 mm Installation height max. 760 mm

4 columns tool testing press, pressing force 250 tons,

Hydraulic tool testing press and small batch press, Nominal force : 400to, Stroke: 600mm , Table surface/ ram surface: 2500 x 1500mm 4200 operating hours, weight: 32to. To be visited under electricity.

Table dimensions ( x-y/mm) 2500 X 1500 Stroke (mm) 1600 Motor Power (kw) 15 Weight ( ton) 32 Location Turin Italy Ce Marked Year of made 2001 Distance between uprights 2600 mm Max distance between table and ram 2000 - min. 400 mm Front moving plate - Upper ram plate tilting 110° Number of cylinders 2 - Maximum load in the lower table 18000 Kg - Maximum weight on the upper slide/ram 9000 Kg - Approach/return speed 40 mm/s - Working speed 2÷8 mm/s

Key data: 30 t, 1100 mm, 750 mm

- Table size: 1100 x 750 mm - Table bore: M 16 mm - Table height above floor: 850 mm - Upper slide swivel range: 360° - Upper table load max.: 1200 kg - Load lower table: 4000 kg - Hydraulic pressure: 10 to 200 bar - Pressure: 30 t - Swivel range: 360° - Documentation: yes - Total power: 5.5 kW - Machine weight: 3100 kg - Space requirements (W x D x H): 1.9 x 1.7 x 2.2 m - Condition: very good Details well-kept condition, little used Accessories Documentation, clamping devices, supports

pressure:40 t table length:1000 mm table width:700 mm weight of the machine ca.:9 t dimensions of the machine ca.:4000 x 4400 x 1800 mm stroke length max.:1050 mm dayligth:1200 mm table rotating:um 180 Grad table load:5 t pre-running speed:100 mm/sec return speed:100 mm/sec work speed:von 0 bis 10 mm/sec. Main cylinder:1 Stück Table extendable by:for 1050 mm Table tilting:50 Grad Fold-down upper tool:180 Grad Speed of table:25 mm/sec Light sensors sick:1250 mm Description: Columns and cylinders are made of tool steel SAE 1045 (identical to German standard C 45) and external Induction hardened and chromium-plated. The linear measuring rod communicates the position of the plunger to the controller. The Traverse path, the upper breakpoint And the switch point at which the press should switch from empty journey to working speed, as well as the The end position to be used can be easily and q ...

pressure:63 t table length:700 mm table width:1000 mm weight of the machine ca.:ca. 9 t dimensions of the machine ca.:4500 x 4300 x 2700 m :1 Stück stroke length max.:1200 mm daylight dimension : table/slide up:1200 mm table height:700 mm :um 1200 mm :um 45 Grad :um 170 Grad :1250 x 1000 mm table load:5 t :25 mm/sec pre-running speed:95 mm/sec return speed:80 mm/sec work speed:von 0 bis 10 mm/sec.

pressure:56 t table length:1000 mm table width:700 mm daylight opening:1200 mm No. of Cylinders:1 St. stroke length max.:1200 mm table height over floor:700 mm table extendable:1200 mm Speed of table:25 mm/sec Table tilting:45 Grad table load:5 t Fold-down upper tool:170 Grad :1250 x 1000 mm :95 mm/sec speed of return flow:80 mm/sec working feed:0 - 10 mm/sec dimensions:4300 x 2700 x 4500 mm total weight:8,5 t Monitor Siemens:9 Zoll :1200 mm

pressure:40 t table length:1000 mm table width:700 mm weight of the machine ca.:9 t dimensions of the machine ca.:4000 x 4400 x 1800 mm stroke length max.:1050 mm dayligth:1200 mm table rotating:um 180 Grad table load:5 t pre-running speed:100 mm/sec return speed:100 mm/sec work speed:von 0 bis 10 mm/sec. Main cylinder:1 Stück Table extendable by:um 1050 mm Table tilting:50 Grad Fold-down upper tool:180 Grad Speed of table:25 mm/sec Light sensors sick:1250 mm Columns and cylinders are made of tool steel SAE 1045 (identical to German standard C 45) and externally induction hardened and chrome-plated. The linear measuring rod informs the controller of the position of the pestle. The travel path, the upper stop and the switching point at which the press is to switch from empty travel to working speed, as well as the end position to be approached can be entered easily and quickly via the mo ...

pressure:200 t table length:2500 mm table width:2000 mm stroke max.:2050 mm dimensions:ca. 9200 x 4700 x 5800 mm draw back pressure:25 t Approx. weight (w/o operational materials):50 t column diameter:210 mm table speed:25 mm/sec table extendable:2000 mm table speed:30 mm/sec table load:15 t power capacity:20 kW work speed:1 - 10 mm/sec. pre-running speed:10 mm/sec :25 mm/sec :10 mm/sec. Oil Tank Capacity:400 l Oil cooling (electric):1,5 kW (max) Podestal height:650 mm Table Height:800 mm Ram Height:850 mm Control System by Siemens:S7 1200 Monitor:WEG 12 Zoll :10200 ? Maintenance Balcony:5000 ? :4.000,-- ? :1.000,-- ? :18000 ? :1.500,-- ? :12000 ? Upper Tool Folding:170 Grad Swivel table:75 Grad Table tiltable:75 Grad Ajecters with 60T in the pestle centre:12000 ? Blessed plate folding by 180 degrees:14000 ?

pressure:110 t table length:1200 mm table width:1000 mm stroke max.:1150 mm dimensions:4200 x 2400 x 4800 mm draw back pressure:11 t stroke max.:1150 mm weight:16 t stroke of the table:1200 mm swivable table::45 Grad table load:12 t table speed:25 mm/sec table speed:10 mm/sec power capacity:23 kW voltage:400 V control voltage:24 V DC frequency:50 Hz work speed:0 - 10 mm/sec. :130 mm/sec :195 mm/sec. Colour:Grau 7035 RAL Colour:Orange 2009 RAL Colour:Dunkelgrau 7021 RAL Oil tank capacity:400 l Recommended oil:DIN HLP / ISO VG 46

pressure:100 t table length:1280 mm table width:900 mm stroke max.:1100 mm dimensions:2100 x 3800 x 3900 mm Approx. weight (w/o operational materials):11 t Engine Output:9,5 kW pre-running speed:48 mm/sec Return speed:44 mm/sec Oil Tank Capacity:140 l distance between columns:1150 mm distance table/ram:1035 mm Table height above ground level:630 mm ram surface:1000 x 1200 mm column travel -side:705 mm workpiece weight:max. 7 t Plum:max. 3,5 t Press speed:8 mm/sec

pressure:200 t table length:1500 mm table width:1200 mm stroke max.:1450 mm open height:1650 mm weight:15 t power capacity:22 kW voltage:380 V surface area of ram:1500 x 1200 mm workpiece weight top:max. 4.000 kg workpiece weight max.:10.000 kg rapid traverse - down:48 mm/sec rapid traverse - up:40 mm/sec ram stroke speed - under load:6 mm/sec dist. between pillars (left to right):1250 mm Table height above ground level:630 mm Oil Tank Capacity:400 l

pressure:120 t table length:600 mm table width:600 mm stroke max.:400 mm dimensions:1070 x 2340 x 2800 mm weight:4,2 t pre-running speed:10 mm/sec :26 mm/sec :200 l Oil cooling (electric):1,5 kW (max) table height:875 mm Working height from to:500 mm diameter of piston:230 mm total power requirement:15 kW pump capacity:24 Lt./sec Pressure power:300 bar :76 mm :650 mm capacity of ejector in table:20 t :150 mm Recommended oil:46er

pressure:63 t table length:1200 mm table width:1000 mm stroke max.:1050 mm dimensions:ca. 3350 x 1800 x 4700 mm draw back pressure:6 t Approx. weight (w/o operational materials):10 t column diameter:120 mm Fold-down upper tool:180 Grad Swivable Table:75 Grad table speed:25 mm/sec Table tilting:75 Grad table extendable:1100 mm table load:5 t Engine Output:10 kW Oil Tank Capacity:200 l Oil cooling (electric):1,5 kW (max) Monitor:(WEG) 12 Zoll

Length: 0 mm Width: 0 mm Thickness: 0 mm Accuracy class: 0   Type of material: 0   Technical data Dimensions: Length: 630 mm Width: 400 mm Height: 80 mm

Length: 0 mm Width: 0 mm Thickness: 0 mm Accuracy class: 0   Type of material: 0   Technical data Table length: 2080 mm Table width: 1280 mm Table height: 600 mm Dimensions: Length: 2080 mm Width: 1280 mm Height: 900 mm

Length: 0 mm Width: 0 mm Thickness: 0 mm Accuracy class: 0   Type of material: 0   Technical data Dimensions: Length: 630 mm Width: 400 mm Height: 80 mm

Length: 0 mm Width: 0 mm Thickness: 0 mm Accuracy class: 0   Type of material: 0   Technical data Table length: 1200 mm Table width: 800 mm Table height: 165 mm Dimensions: Length: 1400 mm Width: 1000 mm Height: 800 mm Various accessories: Measuring table (Marble) with support

pressure:400 t table length:3000 mm table width:2500 mm table extendable:5400 mm table load:50 t dimension of workpiece:mind. 1000×850 mm :min. 400/max. 2800 mm Fold-down upper tool:180 Grad dimensions:8980×4470×8020 mm total weight:92 t engine output:45 kW hydr. components:unter anderem von VICKERS/Amerika LCD Touchscreen with PLC control:S7-1200 mit Siemens Touch Screen Smart1000IE

length:1500 mm width:1000 mm weight of the machine ca.:0,2 t dimensions of the machine ca.:1,5 x 1 x 0,8 m Surface plate / Welding bench with underframe

length:600 mm width:500 mm weight of the machine ca.:0,05 t dimensions of the machine ca.:1,5 x 1 x 0,8 m

Closing force: 40,000kp, connected load: 7.5kW.

Spotting ruler, dressing ruler, test ruler, straightening ruler, straightening bar -Spotting ruler: 60° -Ruler length: 2015 mm -Dimensions: 2275/120/H105 mm -Weight: 90 kg

pressure:250 t table length:4000 mm table width:3000 mm Controls:SIEMENS SIMATIC C7 PRESS DESIGN:. - frame design : 4 column :. - moving bolster : yes :. PRESS FORCES:. - total force (nominal):250 to PRESS TABLE:. - clamping surface (left-right):4000 mm - clamping surface (front-back):3000 mm RAM:. - clamping surface (left-right):4000 mm - clamping surface (front-back):3000 mm RAM (HYDR. PRESS):. - number of main-cylinders:1 - approximation velocity max.:50 mm/s - restoring force of ram:85 to RAM EJECTORS:. - stroke:300 mm - force:14 to DIE CUSHION (TABLE CUSHION):. - force of cushion:20.5 to - stroke:320 mm TOOL ASSEMBLY DIMENSIONS:. - distance table - ram max.:2750 mm - distance between columns (H-frame):4100 mm - Free passage between side columns (width):1500 mm ELECTRICAL SPECIFICATIONS:. - total power consumption:45 kW - mains voltage:400 V - mains frequency:50 H ...

pressure:40 t distance between columns:620 mm stroke:975 mm distance table/ram, max. stroke up, adjustment up:940 mm table surface area:590 x 1000 mm table height over floor:770 mm ram surface:590 x 1000 mm side window:470 mm max. tool weight:2,5 t max. capacity of swivelling ram plate:1,5 t Speed down:0 - 50 mm/s Speed up:0 - 34 mm/s Working speed:0 - 10 mm/s oil volume:150 l power requirement:9,5 kW weight:3,2 t dimensions (WxDxH):2,0 x 2,4 x 3,0 m

pressure:100 t distance between columns:1250 mm stroke:1035 mm table surface area:890 x 1280 mm distance table/ram, max. stroke up, adjustment up:1035 mm table height over floor:630 mm ram surface:1000 x 1200 mm side window:700 mm max. tool weight:7 t max. capacity of swivelling ram plate:3,5 t oil volume:180 l power capacity:9,0 kW weight:11,0 t Dimensions (WxDxH):2,1 x 3,8 x 3,9 m ram interlocking:hydraulic

pressure:70 t distance between columns:750 mm stroke:900 mm table surface area:700 x 1000 mm Distance table/ram, stroke up:900 mm table height over floor:680 mm ram surface:700 x 1000 mm side window:600 mm max. tool weight:5,0 t max. capacity of swivelling ram plate:2,0 t Speed down:0 - 50 mm/s Speed up:0 - 48 mm/s Working speed:0 - 8 mm/s oil volume:140 l power capacity:9,5 kW weight:8,0 t Dimensions (WxDxH):2,2 x 1,2 x 3,7 m

Hydraulic glue press with heating base, infinitely variable temperature setting, stuffenlose setting of the adhesive holding time, Power: 5 kW, 380 v 50 Hz; Two-hand operation.

Weingarten Excenter Press

Hydraulic press Pellegrini Hot water Pressing area 4000 mm x 1300 mm manual glue application incl. Insertion table Acceptance: Vacuum - Gantry forklift SIRIO

SERGIANI 2 - Floor Continuous Press Model Leopida/Leomatic Slide-in table 6,000 mm x 1,400 mm Press 5,000 mm x 1,400 mm Discharge roller conveyor 4,000 mm x 1,400 mm

HF Press Manufacturer Ormamacchine High-frequency continuous belt press Manual glue application incl. Laying table / filling bed 5000 x 1400 mm Press 4600 x 1400 mm Roller conveyor outlet 5000 mm Workpiece thickness max 200 mm Side printing cylinder 10 Pressing force 110 t RF Generator 40 Kw Dimension: 16000 x 3200 mm

Catalog No. 6832 TECHNICAL DATA piston cylinders 5 pcs: - 3 vertical - 2 horizontal - max length of glued elements 3630mm - max width of glued elements 2270mm - engine power 0.75 kW - hydraulic piston cylinders - dimensions length/width/height 4450x880x2880mm - weight about 1000 kg ADVANTAGES – German production – unpainted - a hydraulic press – used press, very good condition Net price: PLN 13900 Net price: EUR 2989 Net price calculated according to the exchange rate of 4.65 PLN/EUR (with larger exchange rate fluctuations, the price may change)

We can offer you all types of Wafios nail machines from S25 - N90

We can offer you all types of Wafios nail machines from S25 - N90

Catalogue-Nr 09-2060 in very good condition! Apex 1600 Pressing Station is a continuous pressing system for the production of fruit juice.The advantages of the APEX Pressing station are universal application for several kind of fruits, we have experience with Apples, Pears, Grape juice, Cherries, Strawberries, Red current Technical Data: Capacity: 14 to/h Length: 6646 mm Width: 4110 mm Height: 5630 mm Weight: 8000 kg Width of belt 1500 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination. Delivery: from 97753 Karlstadt-Karlburg