screwed used for sale

6 spiral augers, total volume: approx. 55 cbm, capacity: approx. 150 cbm/h, drive 3 x 11 kW

1 roller movement: Machines No.: 0018 Drawing No.: 242 002 54 Roller speed length: 4 m Roll width: 300 mm Mounted with ball bearing rollers on profilesteel frames Drive by special gear motor Precision roller chain Spring-loaded length compensation 1 pull-off cross conveyor: Machine number: 0037 Drawing number: 147 501 46 Axle distance: 6.5 m Rank: 3 3/4" chain V2A built-in in roller aisle Transport of the cut material is carried out by roller link chain and screwed-on carriers Drive by gear edible motor Chain carriers made of profiled steel 1 pull-off cross conveyor: Machines No.: 0038 Drawing No.: 147 501 47 Axle distance: 6.5 m Rank: 3 3/4" Chain V2A built-in in roller aisle Transport of the cut material is carried out by roller link chain and screwed-on carriers Drive by gear edible motor Chain carriers made of profiled steel 1 pull-off cross c ...

Clamping device with 3 pcs claw box double acting to compensate for material elongation during welding or heat development by working process New condition of the three claw boxes with screwed-on Interchangeable plate jaw system and hardened screwed clamping jaws . Size : Claw box; approx. 50 cm x 25cm (box) x 15 cm movable support part: approx.31 x23 cm Alternate plates size approx. 31 x 23 cm x height from 18 to 23 cm Spindle adjustment path. approx. 130 mm , voltage by spindle with compression spring preload system Accessories: 6 sets of alternating plate jaws as good as new

Clamping device with 3 pcs claw box double acting to compensate for material elongation during welding or heat development by working process New condition of the three claw boxes with screwed-on Interchangeable plate jaw system and hardened screwed clamping jaws . Size : Claw box; approx. 50 cm x 25cm (box) x 15 cm movable support part: approx.31 x23 cm Alternate plates size approx. 31 x 23 cm x height from 18 to 23 cm Spindle adjustment path. approx. 130 mm , voltage by spindle with compression spring preload system Accessories: 6 sets of alternating plate jaws as good as new

Stable shelves, total approx. 1,500 to 1,800 fields, Gemac, without clamping crosses, frame height: 2.48m, shelves: 1.20m x 1.30m, 130kg / level – used - : Construction site price: Price per field ex location: only 95.-€ (net), dismantled, packed and loaded! Price from at least 100 fields: Per field from location: only 85.- € (net), dismantled, packed and loaded! More intermediate floors for an extra charge! We reserve the right to take a minimum order! Manufacturer: Gemac Type: should be Normaflex Year of construction: 2006 Frame height: approx. 2,48m Field depth: 1,20m Field width: approx. 1.31m Shelves: Professional load per floor: 120kg Field load: 850kg Floors per field: 6 incl. lid on which can also be stored The 6 floors / levels consist of 3 large continuous floors and 3 levels consisting of narrower floors (which then also make up a large ...

Specifications: - Span width approx. 850 mm - Clamping surface height approx. 700 mm - Clamping block depth 300 mm - Total height with clamping base 750 mm - Clamping base dimensions 850 x 450 mm - Clamping holes M16 - Distance of the clamping holes 40 mm - Number of clamping holes per side 336 pcs - Total number of clamping holes 772 pcs - Internal dimensions of the clamping block 380 x 220 mm each - Wall thickness of the clamping areas approx. 40 mm - laterally screwed on 3 jaw lining 300 mm - side-screwed hydr. Machine vice RÖHM - Jaw width 200 mm - Weight approx. 700 kg

Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) Pvlzwy immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 20092 h +Schließeinheit+ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 570 x 570 mm Injection unit 1 (150 unit) Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar Injection unit 2 (150cc unit) Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar Injection unit 3 (60cc unit) Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2080 bar Extras 1 ALLROUNDER 420  ...

- 2 ZK yeast tanks, Fabr. BAM, each with a capacity of 59.98 hl, zul. Operating overpressure 3.5 bar, in stainless steel, standing on 3 feet, with 3 cooling zones (2 x frame + 1 x cone), with screwed swivel cone tip, with agitator in the cone, with Spray head, top with ladder bracket, YOC 1985. - 2 ZK yeast tanks, Fabr. Steinecker, with a capacity of 62 hl each, zul. Operating overpressure 3.5 bar, in stainless steel, standing on 3 Feet (1 foot on load cell), with 3 cooling zones (2 x frame + 1 x cone), with screwed swivel Cone tip, with agitator in the cone, with spray head, pulled down cleaning line, top with conductor bracket, YOC. 1981.

Cantilever rack NEW Data: - H : approx. 400 cm - D : approx. 137 cm - L : approx. 402 cm - Cantilevers : approx. 120 cm - Axle dimension: 131 cm - NEW GOODS immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilevers in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 200 mm pitch. - Levels: feet + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stand, incl. base approx. 400 cm made of IPE160. - 16 x cantilevers approx. 120 cm made of IPE 80 - incl. all necessary fasteners and screws. Why BLT cantilever racks ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load capacities of the shelf stands and cantilevers are statically detectable, at 100% load. - All racking systems are supplied in hot-dip galvanized version. They can therefore be placed insid ...

Cantilever rack NEW Data: - H : approx. 300 cm - D : approx. 137 cm - L : approx. 402 cm - Cantilevers : approx. 120 cm - Axle dimension : 131 cm - NEW GOODS immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilevers in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm pitch. - Levels: feet + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stand, incl. base approx. 300 cm made of IPE160. - 12 x cantilevers approx. 120 cm made of IPE 80 - incl. all necessary fasteners and screws. Why BLT cantilever racks ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load capacities of the shelf stands and cantilevers are statically detectable, at 100% load. - All racking systems are supplied in hot-dip galvanized version. They can therefore be placed insi ...

Cantilever rack NEW Data: - H : approx. 350 cm - D : approx. 137 cm - L : approx. 402 cm - Cantilevers : approx. 120 cm - Axle dimension: 131 cm - NEW GOODS immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilevers in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm pitch. - Levels: feet + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stand, incl. base approx. 350 cm made of IPE160. - 16 x cantilevers approx. 120 cm made of IPE 80 - incl. all necessary fasteners and screws. Why BLT cantilever racks ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load capacities of the shelf stands and cantilevers are statically detectable, at 100% load. - All racking systems are supplied in hot-dip galvanized version. They can therefore be placed insid ...

used chain conveyor belt Manufacturer: EuroTec Type : KB 1400 Technical data: Chain type : M 112 Feed length : approx. 6,150 mm Path length : approx. 9,500 mm Belt width : approx. 1,400 mm Conveying width : approx. 1,300 mm Steel body of the conveyor belt : made of St 37 Drive motor with brake : 5.5 kW Switch EMERGENCY STOP : yes Switch START- STOP : yes Lubrication with drip oilers : electric (MURDFELDT) Side tray heights in the feeding area: approx. 500 mm dto. in the climbing section : approx. 1,000 mm Climbing angle : approx. 30°/-20° Gooseneck : yes lower belt cover in the climbing area up to a maximum of approx. 2.50 m intervention height : yes Material outlet chute : yes Conveyor belt supports : yes technical design of the tape: Drive Manufacturer : Getriebebau Nord Type : Bevel gear jack motor Protection class : IP 55 Chain Type : M 112  ...

CARRAGARM RACK NEW Data: H : approx. 426 cm D : approx. 137 cm L : approx. 403 cm Cantilever : approx. 120 cm Axial dimension: 131 cm NEW GOODS immediately from stock. 675 kg load per arm 2700 kg load per stand Stand in hot-dip galvanized. Cantilever in hot-dip galvanized. Arms are screwed. Arms adjustable in 100 mm grid. Levels: feet + 4 storage levels (5 storage levels) Shelf consists of: 04 x stand, incl. base approx. 426 cm made of IPE180. 16 x cantilever arms approx. 120 cm made of IPE 100 incl. all necessary fasteners and screws. Why BLT cantilever racks ? Certified German manufacturer DIN EN 1090 - Made in Germany All specified load capacities of the rack stands and cantilever arms are statically verifiable, at 100% load. All racking systems are supplied in hot-dip galvanized design. They can therefore be installed inside and outside and do not rust like pa ...

Heidolph Polymax 1040 with incubator 1000 and high incubation hood. Offered here is the platform shaker with tumbling movement with temperature-controllable, high incubation hood. It is a package of the following devices: - Polymax 1040 - tumbling platform shaker with 2 - 50rpm, continuous operation and timer function (max 120min) - Incubator 1000 - nominal temp display, actual temp display, adjustable temperature up to 65°C - Incubator hood, high The Polymax has a single-sided, dismountable and completely removable attachment, consisting of two vertical, screwed anchor pins and a height-adjustable, padded grab bar. The incubator hood is damaged at the left, front corner. An edged aluminum plate was glued over the damaged area and screwed into the floor. This repair is professional and not a backyard screw. I am happy to send detailed photos. The device can be vi ...

This ploughshare / inclined bucket mixer is a customer return without operating hours. Before delivery, the mixer workshop is overhauled. Machine name: Ploughshare / Inclined bucket mixer Manafacture: MAP Type: WBHP 15000 Year of construction: 2013 Hours: Zero Material: Mild steel S235J Drive motor: Here you can choose between 160 kW, 200 kW and 250 kW Designation: Single-shaft horizontal mixer Design: Batch mixer Usable volume: 4,500 - 10,500 litres Equipment tools: Plowshares (screwed) Dimensions: L 6124 mm x W 2800 mm x H 2525 mm Empty weight: weight 8000 kg Tech. Documentation: Yes Note: Since the tools are screwed, it can be used both as a ploughshare mixer and as an inclined bucket mixer. This horizontal mixer is a customer return without operating hours. Before delivery, the mixer workshop is overhauled. Condition: New and workshop overhauled Price: On request

used baler Manufacturer: PAAL Type: CPH 6540 Machine number: 29600 Year of construction: 2008 Main parts of the press: 1 automatic channel press 1 automatic lacing 1 hydraulic system 1 electrical control Press force at approx. 300 bar: 650 kN Duct cross-section (h x w): 75 x 100 cm Filling opening (l x w): 160 x 92 cm Number of binding wires: 4 pieces Power: - Wire pull: 3 kW - Twisting: 3 kW - Main drive pump: 75 kW Hydraulic oil tank volume: 2200 l Machine weight: approx. 14 t, depending on equipment Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Press complete for continuous operation including: Machine design consisting of: - Pressure plate with roller guide mounted on the inside at the bottom, - Press box floor made of highly wear-resistant special steel, - replaceable, screwed running dies for the lower pr ...

CARRAGARM RACK NEW Data: H : approx. 416 cm D : approx. 137 cm L : approx. 402 cm Cantilever : approx. 120 cm Axial distance : 131 cm NEW GOODS immediately from stock. 500 kg load per arm 2250 kg load per stand Stand in hot-dip galvanized. Cantilever in hot-dip galvanized. Arms are screwed. Arms adjustable in 100 mm grid. Levels: feet + 3 storage levels (4 storage levels) Shelf consists of: 04 x stand, incl. stand approx. 416 cm made of IPE160. 12 x cantilever arms approx. 120 cm made of IPE 80 incl. all necessary fasteners and screws. Why BLT cantilever racks ? Certified German manufacturer DIN EN 1090 - Made in Germany All specified load capacities of the rack stands and cantilever arms are statically verifiable, at 100% load. All racking systems are supplied in hot-dip galvanized design. They can therefore be installed inside and outside and do not rust like pain ...

Technical data and further information: Shelving system: Bito Type: PRO Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of racks: approx. 37,380 mm Number of fields per row of shelves: 11 pcs. á 3,300 mm Number of levels plus ground level: 02 pcs. The scope of delivery includes: 12x pallet rack stand, used Material color: sendz. galvanized Stand profile abm.: 90 x 65 x 1.75 mm Profile Type: P2 Incl. transverse and diagonal struts, Foot plates The stands are pre-assembled ( screwed truss ) 2,100 mm high 1,100 mm deep 44x pallet rack trusses, used Material color: blue Box profile: 150 x 50 mm Truss type: PT150M Agraffe: 5 HK (hook) clear width: 3,300 mm load per pair of trusses 3,500 kg at the same time. distributed load Material color: sendz. galvanized Stand profile abm.: 90 x 65 x 1.75 mm Profi ...

Technical data and further information: Shelving system: Cornix / Duwic Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 24,600 mm Number of fields per row of shelves: 07 pcs á 3,400 mm The scope of delivery includes: 07x Pallet rack stand, used Material color: blue Stand profile dimensions: 100 x 80 x 1.50 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( screwed truss ) 2,000 mm high 1,000 mm deep 01x Pallet racking stand, used Material color: blue Stand profile dimensions: 100 x 80 x 1.50 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled ( screwed truss ) 1,780 mm high 1,000 mm deep 49x pallet rack beams, used Material color: yellow-orange Box profile: 80 x 50 mm Agraffe: 6 HK (hook) Clear width: 3,400 mm 02x Pallet rack beams, used  ...

ID2300 5 piece Silos 5 piece silos (approx. 150 cbm each), screwed, on steel feet approx. 3 m high, silo height approx. 5 m, diameter approx. 7 m 5 silos (approx. 150 cbm/silo), screwed, on steel feet approx. 3 m high, silo height approx. 5 m, diameter approx. 7 m

tower silos 4 x 50 m³ / 50000 litres of polyester tanks / Tower silos / flour silos, GRP silos, grain silo / hopper silo / compound feed component silo Top condition Content per silo: 50 m³ / 50000 litres piece / pc: 4 pieces Year of construction: 1994 mass of Tower silos without steel: approx. Ø 2,80 x 12 m high Height of the entire system: 21 m Density/weight: 1,200 kg per m³ approval number: Z 10-22-42 Manufacturer: Polem More details: the silos are in good used condition. According to the age traces are present. The system has complete works until its closure. The system could not be tested yet, because there is no power supply. It is a complete meal silo plant with very thick-walled 4 x 50 m³ GRP silos with a density/weight 1200 kg per m³ is each silo separately to fill up the tanks through several cross conveyor (scraper conveyors). The silo is a spray head to cle ...

Pierce Control Automation RUR 2500 P working range: 2.1 m x 6.1 m control: Burny 10 LCD Completely welded portal construction without screwed connections o linear guide in the transverse axis o AC servomotors (12 000 mm/min.) o Digital synchronization on the laeng axis o CNC control system BURNY 10 LCD Plus with touch screen o membrane keyboard o flyingmounted cutting buttons o Automatic initial adjustment of the plasma torch o voltage monitoring of the plasma torch height o 1 torch parking lot outside the cutting area o circuit breaker at the end of all axes 1 x Plasma Kjellberg 160i with manual gas console cutting up to 25mm qualifying cut Optional autogencan Completely factory-assembled machine assembly and commissioning ready for use

The CNC-controlled autogen/plasma cutting machine RUR 2500GP is a completely welded portal construction without screwed connections with linear guides in the transverse axis and digital synchronization in the laeng axis. The HPR260XD plasma system is suitable for use in sheet thicknesses up to 64 mm. The system delivers a high-quality cutting quality, high productivity and reliance with low operating costs. Equipment: ? CNC control system Pierce-19 with 19 touchscreen ? Energy chains with cables and loops ? A motorized plasma torch with automatic initial setting and burner ? Pneumatic anti-collision system ? Plasma cutting unit HPR260XD for cutting structural steel up to a material thickness of 64 mm, hole piercing up to 38 mm, beard-free cut up to 32 mm, manual gas console ? Two three-burner autogenschraegschneidkoepfe with electrical finishing and burner attachment control for  ...

Stainless steel chimney Dimensions: Height: 23.5 m Diameter: approx. 1 m Material: 1.4301 (V2A) Chimney consists of two parts each 12 meters, which are screwed! Frames run to top thin-walled. Construction: Frames length: 2 meters Material thickness of frame: Skirt: 8 mm (steel) Following two frames: 6 mm (1.4301) Following two frames: 4 mm (1.4301) Remaining frames: 3 mm (1.4301) In very good condition!

The CNC-controlled autogen/plasma cutting machine RUR 2500GP is a completely welded portal construction sizing without screwed connections with linear guides in the transverse axis and digital synchronization in the laeng axis. The HiFocus 280i plasma system is suitable for use in the sheet thickness range of 0.5 - 50 (70) mm. As a soft switch inverter, HiFocus 280i offers a fully electronic power source for the power range up to 280 A. The system provides the best cutting results in the field of laser-like cuts and offers a higher service life of the wear parts. Equipment: ? CNC control system Pierce-19 touchscreen ? Energy chains with cables and loops ? A motorized plasma torch with automatic initial setting and burner ? Pneumatic anti-collision system ? Plasma cutting unit HiFocus 280i for cutting structural steel with recommended material thickness of 0.5 - 50 mm, punching up  ...

The CNC-controlled plasma cutting machine RUR 2500P is a completely welded portal construction without screwed connections with linear guides in the transverse axis and digital synchronization in the laeng axis. The HiFocus 161 i plasma system from Kjellberg with Contour Cut is suitable for use in the sheet thickness range of 0.5 - 40 (50) mm. As a soft switch inverter, HiFocus 161 i offers a fully electronic power source for the power range up to 160 A. The system is the multi-talent of plasma cutting technology for marking and cutting construction blades, alloyed steels, aluminium and all electrically conductive materials. (see Pdf ) Equipment: ? CNC control system Pierce 19 with touchscreen ? A motorized torch with automatic initial setting and burner ? Plasma cutting unit HiFocus 161 i for cutting structural steel with recommended material thickness of 0.5 - 38 mm, hole bars up  ...

Bridge crane for Ausseneinsatz Fabrikat steel - built 2007 Traglast 60 t - 16 m track width - height 8 m with enhances crane runway - completely screwed approx. 66 m long

The high-load timber-beam formwork with a system grid The pre-assembled standard elements of Doka timber-beam formwork FF20 combine the advantages of timber-beam formwork with the grid-related advantages of a framed formwork system. Their very high load-bearing capacity offers a new degree of freedom when it comes to fulfilling architectural specifications in a cost-effective way. FF20 is suitable for fair-faced concrete categories SB1 to SB4, as defined in the DBV Code of Practice. High pouring rates made possible by extra-strong components Up to a pour-height of 3.60 m, only two 20.0 form-ties are needed, thanks to the 80 percent higher load capacity of the I tec 20 composite formwork beam compared to conventional H20 timber formwork beams the stiff FF20 tec walings WU14, with their welded-on plates Maximised utilisation of equipment and ease of handling Lowers commiss ...

3 stueck unused electric motors for Saeege machines from Rueetschi 380 / 400 Volt 50Hz Dreick circuit 5.5 KW 11.3 A 2850 rpm With tool holder (saege leaf holder) Shaft diameter 30mm Diameter handle for saege leaf (middle) approx.55mm Diameter tool holder outside approx.165mm Total length motor approx. 570mm Total width approx. 200mm Price per piece Hole distance for screwing on the motor laengs 200mm Hole spacing Cross 200mm The abstinfers can be varied in the length and width, because the motor is screwed on to the console via T-slots. The T-slots are located on the motor. Thus, any hole distance would be feasible via a different console. Thread on the motor shaft is right thread (if the nut is in the clockwise, is tightened when the motor is counterclockwise and the mother is hooked- view from the front to the wave) Diameter of the thread approx. 28-30mm. direc ...

Extraction system L x W x H: 2450 x 1340, + distance pipe incl. engine 1400 x 2900 mm Built in 1988 Weight approx. 400 kg The system can be screwed apart. Disassembly by buyer. The system is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4952 Eriswil/DE-79618 Rheinfelden MATEC systems + technology GmbH Mechanical engineering Mill mat 4 CH-4952 Eriswil/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

In 2007 Floor press from BÃ?TFERING, type 4 H 100,. Lower piston design Pressing area of 1250 x 2200 mm Aluminium plates electrically heated Total pressure of 100 to Operating pressure 320 bar spec. Pressure 3.5 kg/cm2 with full interpretation spec. Pressure at 80% design 4.5 kg / cm2 Hydraulic power 380 volts, 50 Hz, 1.5 kW Press plates: 2 piece ELKOM electric heating Panel solid hard aluminum in the thermally stable sandwich construction for temperature applications up to 200 ° C 2200 x 1250 x 18 mm + 19 mm Mono Lux + 19 mm V 100 insulation plate 17,500 Watts, 400 volts, 3 Ph. Surface smooth, flat, screw-free, gold anodized Plate construction hides more-row from the bottom screwed maximum continuous temperature 200 ° C incl. 2 piece cooling plate in Sandwitchbauweise. This is mounted below the insulation. The heatsink must be with a cold ...

GS12 - used approx. 26 m³ / 26,000 litres steel tank, gravel filter, pressure tank, water cistern. The container is used and in good condition. capacity: 26.2 m³ / 26,200 litres material: steel tank, pressure tank 6 bar outer dimensions: approx. Ø 2.90 m x height 5.70 m inner dimensions: approx. Ø 2,80 m x height 3.80 m weight: 6 tons output: 42 m³/h year of production: 2000 comm. nr. 22857/3 other: painted blue, threefold epoxy resin coating inside Aboveground pressure tank made of steel, standing vertically on four feet, with two acces holes DN500, one DN300, former gravel filter. Incl. flanged / welded nozzle floor with screwed-in filter nozzles, inner mud funnel, all required connections for untreated water inlet, treated water outlet, backwash in- and outlet and ventilation. This steel tank can be used as gravel filter for filtration, de-icing and  ...

description: Type: MAN 2848 LE gas engine for combined heat and power Power: 255kWe/1,500 rpm information: The engine delivery range does not include a water pump, an ignition system or a gas mixing system! Standard scope of delivery â?¢ 8 cylinder four-stroke gas engine in V-arrangement based on MAN diesel engine single-cylinder heads, high-alloy valve seat rings and valves, form-forged crankshaft with screwed counterweights, wet cylinder jacks, piston cooling over oil spray nozzles â?¢ Compression ratio 14:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, standing, not switchable with oil cooler â?¢ Closed crankcase ventilation with oil separator â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2.293 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve s ...

Standard scope of delivery â?¢ 12 cylinder four-stroke gas engine in V-arrangement based on MAN diesel engine single-cylinder heads, high-alloy valve seat rings and valves, form-forged crankshaft with screwed counterweights, wet cylinder jacks, piston cooling over oil spray nozzles â?¢ Compression ratio 14:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, reclining, not switchable with oil cooler â?¢ Closed crankcase ventilation with oil separator â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2.292 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve solvets made of hard metal â?¢ Cam shaft with drive wheel for electric ignition equipment â?¢ Exhaust collection mammals line uncooled, isolated â?¢ Exhaust turbochargers water-cooled, ...

TECHNICAL INFORMATION Manufacturer: AMMANN Name: Two-shaft continuous mixer Type: AMIX2_4CB Built: 2010 Continuous power: 180 cbm/h Gross volume: 4.12 cbm Net volume: 3.71 cbm Filling level: 0.64 Drive power: 2 x 45 kW Length inside: 2,400 mm Inside width: 1.910 mm Stirring circle diameter: 1,080 mm Axle spacing: 830 mm Weight: 7.700 kg Drive type: V-belts and synchronous transmissions SPECIFIC COMMENT - Mixing trough with electro-pneumatically actuated outlet valve (300 x 650 mm) - Stirring arms with honeycomb blades and screwed agitator arm protection - Automatic central lubrication unit with grease flow monitoring - Mixer camera - Little operating hours and wear - Plant is dismantled and cleaned If there is any interest, we are happy to send you an offer with photos. EuroConsult Dimitrios Piretzidis

4 pcs Kragarm regalia stand, one-sided, new, built year: 2019, consisting of: - Also possible with Dacharm! - Also possible with Dacharm! Technical data: Shelf height: 3,000 mm Shelf depth: 1,360 mm Shelf length: 4,000 mm Axle distance: 3 x 1,300 mm Extension: 1,200 mm Kragarme per stand: 3 pieces (screwed) Pitch: 100 mm max. Load capacity / arm: 750 kg max. Load capacity / stand: 2.250 kg Surface: hot-dip galvanized Condition: new Material scope: Number of stands one-sided: 4 pieces / IPE 160 Number of foot profiles: 4 pieces / IPE 160 Number of Kragarms: 12 pieces / IPE 100 Number of cross bandages: 1 piece Number of spacers: 6 pieces Incl. screws, plugs and load labels Item locations / subject to availability: Germany + Austria + Switzerland Freight / Delivery: 5 - 10 business days after receipt of payment Freight costs (D): â?¬ 290.00 in ...

We offer you here a used workbench of the manufacturer Jung Heinrich for sale. Workbench depth: 600 mm Technical data for the workbench: Manufacturer: Jung Heinrich Type: Esmena The scope of delivery includes: 02x workbench stand, used Material color: dark green or blue Stand profile: 76.2 x 74.7 mm Stand height: 900 mm Stand depth: 600 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 02x workbench traverses, used Material color: orange Box profile: 85 x 40 mm clear width: 2,775 mm 04x locking pins, used Version: completely galvanized 06x drill screws, new Version: galvanized Dimensions: 6.3 x 70 mm 01x chipboard II. choice, used Thickness chipboard: 38 mm Width chipboard: 2,950 mm Depth chipboard: 600 mm Chipboard if necessary two-part The images serve  ...

4 pcs Kragarmregalstand, one-sided, new, built year: 2019, consisting of:- Also possible with Dacharm! - Also possible with Dacharm! Technical data:Shelf height: 4,200 mmShelf depth: 1,360 mmShelf length: 4,000 mmAxis distance: 3 x 1,300 mmExtension: 1,200 mmKragarms per stand: 3 pieces (screwed)Grid: 100 mmmax. Ab. Load capacity / arm: 750 kgmax. Ab. Load capacity / stand: 2.250 kgSurface: hot-dip galvanizedCondition: newMaterial circumference: number of stands one-sided: 4 pieces / IPE 160Number of foot profiles: 4 pieces / IPE 160Number of kragarms: 12 pieces / IPE 100Number of cross bandages: 1 pieceNumber of spacers: 6 PieceIncl. Screws, dowels and debit labelsArticle locations / subject to availability: Germany Austria SwitzerlandFreight / Delivery: 5 - 10 business days after receipt of paymentFreight costs (D): â?¬ 360,00 incl. VAT Austria Switzerland by arrangementNote: ...

4 pcs Kragarm regalia stand with dacharm, one-sided, new, built: 2019, consisting of: Technical data: Shelf height: 3,000 mm Shelf depth: 1,360 mm Shelf length: 4,000 mm Axle distance: 3 x 1,300 mm Extension: 1,200 mm Dacharme: 1,500 mm, 5° rising or falling Kragarme per stand: 3 pieces (screwed) Pitch: 100 mm max. Load capacity / arm: 750 kg max. Load capacity / stand: 2.250 kg Surface: hot-dip galvanized Condition: new Material scope: Number of stands one-sided: 4 pieces / IPE 160 Number of foot profiles: 4 pieces / IPE 160 Number of dacharme: 4 pieces / IPE 100 (with three tabs) Number of Kragarms: 12 pieces / IPE 100 Number of diagonal dressings: 2 pieces Number of spacers: 6 pieces Incl. screws, plugs and load labels We are happy to check for them whether this shelf is designed for their wind and snow loads! Item locations / subject to availabil ...

4 pcs Kragarm regalia stand with dacharm, one-sided, new, built: 2019, consisting of: Technical data: Shelf height: 4,200 mm Shelf depth: 1,360 mm Shelf length: 4,000 mm Axle distance: 3 x 1,300 mm Extension: 1,200 mm Dacharme: 1,500 mm, 5° rising or falling Kragarme per stand: 3 pieces (screwed) Pitch: 100 mm max. Load capacity / arm: 750 kg max. Load capacity / stand: 2.250 kg Surface: hot-dip galvanized Condition: new Material scope: Number of stands one-sided: 4 pieces / IPE 160 Number of foot profiles: 4 pieces / IPE 160 Number of dacharme: 4 pieces / IPE 100 (with three tabs) Number of Kragarms: 12 pieces / IPE 100 Number of diagonal dressings: 2 pieces Number of spacers: 6 pieces Incl. screws, plugs and load labels We are happy to check for them whether this shelf is designed for their wind and snow loads! Item locations / subject to availabil ...

4 pcs Kragarm regalia stand, one-sided, new, built year: 2019, consisting of: - Also possible with Dacharm! - Also possible with Dacharm! Technical data: Technical data: Shelf height: 5,200 mm Shelf depth: 1,360 mm Shelf length: 4,000 mm Axle distance: 3 x 1,300 mm Extension: 1,200 mm Kragarme per stand: 3 pieces (screwed) Pitch: 100 mm max. Load capacity / arm: 750 kg max. Load capacity / stand: 2.250 kg Surface: hot-dip galvanized Condition: new Material scope: Number of stands one-sided: 4 pieces / IPE 180 Number of foot profiles: 4 pieces / IPE 180 Number of Kragarms: 12 pieces / IPE 100 Number of cross bandages: 1 piece Number of spacers: 6 pieces Incl. screws, plugs and load labels Item locations / subject to availability: Germany + Austria + Switzerland Freight / Delivery: 5 - 10 business days after receipt of payment Freight costs (D): &aci ...

We offer you here a used workbench of the manufacturer Jung Heinrich for sale. You can freely choose between the following workbench depths: Workbench depth: 800 mm Technical data for the workbench: Manufacturer: Jung Heinrich Type: Esmena The scope of delivery includes: 02x workbench stand, used Material color: dark green or blue Stand profile: 76.2 x 74.7 mm Stand height: 900 mm Stand depth: 800 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 02x workbench traverses, used Material color: orange Box profile: 85 x 40 mm clear width: 2,775 mm 04x locking pins, used Version: completely galvanized 06x drill screws, new Version: galvanized Dimensions: 6.3 x 70 mm 01x chipboard II. choice, used Thickness chipboard: 38 mm Width chipboard: 2,950 mm Depth chipbo ...

4 pcs Kragarm regalia stand, one-sided, new, built year: 2019, consisting of: Technical data: Shelf height: 2,150 mm Shelf depth: 640 mm Shelf length: 4,000 mm Axle distance: 3 x 1,300 mm Extension: 500 mm Kragarme per stand: 3 pieces (screwed) Pitch: 100 mm max. Load capacity / arm: 1,000 kg max. Load capacity / stand: 3,000 kg Surface: hot-dip galvanized Condition: new Material scope: Number of stands one-sided: 4 pieces / IPE 140 Number of foot profiles: 4 pieces / IPE 140 Number of Kragarms: 12 pieces / IPE 80 Number of cross bandages: 1 piece Number of spacers: 6 pieces Incl. screws, plugs and load labels Item locations / subject to availability: Germany + Austria + Switzerland Freight / Delivery: 5 - 10 business days after receipt of payment Freight costs (D): â?¬ 240.00 inc VAT Austria + Switzerland by arrangement Note: Intermediate ...

4 pcs Kragarm regalia stand with dacharm, one-sided, new, built: 2019, consisting of: Technical data: Shelf height: 5,200 mm Shelf depth: 1,360 mm Shelf length: 4,000 mm Axle distance: 3 x 1,300 mm Extension: 1,200 mm Dacharme: 1,500 mm, 5° rising or falling Kragarme per stand: 3 pieces (screwed) Pitch: 100 mm max. Load capacity / arm: 850 kg max. Load capacity / stand: 2,600 kg Surface: hot-dip galvanized Condition: new Material scope: Number of stands one-sided: 4 pieces / IPE 180 Number of foot profiles: 4 pieces / IPE 180 Number of dacharme: 4 pieces / IPE 100 (with three tabs) Number of Kragarms: 12 pieces / IPE 100 Number of diagonal dressings: 2 pieces Number of spacers: 6 pieces Incl. screws, plugs and load labels We are happy to check for them whether this shelf is designed for their wind and snow loads! Item locations / subject to availabil ...

4 pcs Kragarm regalia stand, on both sides, new, built in 2019, consisting of: Technical data: Shelf height: 2,600 mm Shelf depth: 2,160 mm Shelf length: 4,000 mm Axle distance: 3 x 1,300 mm Extension: 1,000 mm Kragarme per stand: 6 (3/3) pieces (screwed) Pitch: 100 mm max. Load capacity / arm: 600 kg max. Load capacity / stand per side: 1,800 kg Surface: hot-dip galvanized Condition: new Material scope: Number of stands, on both sides: 4 pieces / IPE 160 Number of foot profiles, on both sides: 4 pieces / IPE 160 Number of Kragarms: 24 pieces / IPE 80 Number of diagonal dressings: 2 pieces Number of spacers: 6 pieces Incl. screws, plugs and load labels - Also possible with Dacharm! - Also possible with Dacharm! Item locations / subject to availability: Germany + Austria Freight / Delivery: 5 - 10 business days after receipt of payment Freight cost ...

We offer you here a used workbench frame of the manufacturer Jung Heinrich for sale. Workbench depth: 600 mm Technical data on the workbench frame: Manufacturer: Jung Heinrich Type: Esmena The scope of delivery includes: 02x workbench stand, used Material color: dark green or blue Stand profile: 76.2 x 74.7 mm Stand height: 900 mm Stand depth: 600 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 02x workbench traverses, used Material color: orange Box profile: 85 x 40 mm clear width: 2,775 mm 04x locking pins, used Version: completely galvanized The images serve to illustrate the material. The material color may differ if necessary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5 workin ...

4 pcs Kragarm regalia stand, one-sided, new, built year: 2019, consisting of: Technical data: Shelf height: 2,600 mm Shelf depth: 1,160 mm Shelf length: 4,000 mm Axle distance: 3 x 1,300 mm Extension: 1,000 mm Kragarme per stand: 3 pieces (screwed) Pitch: 100 mm max. Load capacity / arm: 600 kg max. Load capacity / stand: 1,800 kg Surface: hot-dip galvanized Condition: new Material scope: Number of stands one-sided: 4 pieces / IPE 140 Number of foot profiles: 4 pieces / IPE 160 Number of Kragarms: 12 pieces / IPE 80 Number of cross bandages: 1 piece Number of spacers: 6 pieces Incl. screws, plugs and load labels Item locations / subject to availability: Germany + Austria + Switzerland Freight / Delivery: 5 - 10 business days after receipt of payment Freight costs (D): â?¬ 290.00 inc VAT Austria + Switzerland by arrangement Note: Intermedia ...

Forklift attachments Snow sliders with rubber scrapers Quick pick-up with the fork tines Clearing shield 2-fold to the left and right adjustable Spring folding hatches and scraper screwed on Securing against unintentional slipping Shield width: approx. 2000 mm Shield height: approx. 400 mm Fork cross section: approx. 120 x 50 mm Fork distance: approx. 540 mm All information without guarantee

We offer you here a used workbench frame of the manufacturer Jung Heinrich for sale. Workbench depth: 1,000 mm Technical data on the workbench frame: Manufacturer: Jung Heinrich Type: Esmena The scope of delivery includes: 02x workbench stand, used Material color: dark green or blue Stand profile: 76.2 x 74.7 mm Stand height: 900 mm Stand depth: 1,000 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed half-timbering ) 02x workbench traverses, used Material color: orange Box profile: 85 x 40 mm clear width: 2,775 mm 04x locking pins, used Version: completely galvanized The images serve to illustrate the material. The material color may differ if necessary. - The workbenches are picked unassembled; - The workbench stands are pre-assembled; - The production time is usually about 3 - 5  ...

We offer you a used pallet rack manufacturer Rosss. Technical data for the pallet control stand: Shelving system: Rosss Included are: 01x Pallet rack, used Material color: sendzimir galvanized Profile: 90 x 75 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed truss ) 2,000 mm high 1,100 mm deep Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection carried out in accordance with DIN EN 15635 in accordance with the Requirements of the BGR 234 visual inspection for all shelving systems Delivery with our own fleet (without discharge)