screw presses used for sale

Triple screw pump, centrifugal pump, high pressure pump, centrifugal pump, lubricating oil/oil pump, triple screw pump -Manufacturer: Allweiler, screw pump type SPF40R54U8.3-W20 with hose package -Flow rate: 3.4 l/min -Pressure: 3 bar -Motor: 0.7 kW / 1800 rpm -Hose package: length 1x 60 m / 1x 6 m -Dimensions: 1230/900/H960 mm -Weight: 160 kg

Compressed air tank, pressure container, pressure tank, compressed air boiler, pressure vessel, compressor tank, pressure accumulator for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Boge, pressure accumulator with filter block from compressor type SL 270 -Pressure accumulator: Type 306022 V 230 L -Final pressure: max. 15 bar -Hole circle: Ø 240 x 22 mm -Filter units: see photos of individual components -Dimensions: 1600/980/H1270 mm -Weight: 289kg

Gate valve for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Boge, gate valve from compressor type SL 270 -Solenoid valve: type 644.0044.01 -Final pressure: max. 14 bar -Hole circle: Ø 295 x 22 mm -Dimensions: 415/340/H440 mm -Weight: 25kg

Screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw compressor, suction regulator relief valve, relief valve -Manufacturer: Boge, screw compressor intake regulator relief valve from compressor type SL 270 -Type: 644 0041 01 -Pressure: 0.5 - 10 bar bar -Dimensions: 195/100/H140 mm -Weight: 2.0 kg

Screws, washers, stainless steel screws, VA screws, wood screws, hanger screws, solar fasteners -Solar fastener hanger screws and adapter plates 350 kg -Hanger screws: M10 x 200 1632 pieces. -Adapter plates: 80 x 30 x 5,475 pieces / 80 x 40 x 5,673 pieces -Material: A2 AISI304 stainless steel -Levy/Price: complete -Dimension: 1200/800/H540 mm -Weight: 350 kg

Bolts, Hex Bolts, Flange Nuts, Hex Nuts, Flange Nuts, Solar Fasteners -Hexagon screws/hex nuts: M 10 stainless steel 242 kg -Hexagon head screws: DIN 933 M10-1.5 x 100 1000 pieces / M10 x 60 2100 pieces. -Hexagonal nut: self-locking type M10 DIN 982 2700 pieces. -Hexagon nut: with flange and locking teeth M10 SW15 Din 6923 800 pieces -Price: complete -Transport dimensions: 1200/800/H230 mm -Total weight: 242 kg

C-shaped screw clamp, screw clamps, steel construction clamps, clamps, clamping tools -Manufacturer: Holex, malleable cast iron screw clamp 600 x 120 mm -Article No.: Hoffmann 860100 600 -Wingspan: approx. 600 mm -Clamping depth: approx. 120 mm -Number: 3x screw clamp available -Price per piece -Dimensions: 700/190/H40 mm -Weight: 3.1 kg/piece

C-shaped screw clamp, screw clamps, steel construction clamps, clamps, clamping tools, malleable cast iron screw clamp -Manufacturer: Holex, malleable cast iron screw clamp 300 x 140 mm -Wingspan: approx. 300 mm -Clamping depth: approx. 140 mm -Number: 2x screw clamp available -Price per piece -Dimensions: 400/210/H40 mm -Weight: 2.1 kg/piece

C-shaped screw clamp, screw clamps, steel construction clamps, clamps, clamping tools, malleable cast iron screw clamp -Manufacturer: Holex, malleable cast iron screw clamp 250 x 120 mm -Wingspan: approx. 250 mm -Clamping depth: approx. 120 mm -Quantity: 1x screw clamp available -Dimensions: 340/180/H30 mm -Weight: 1.5 kg.

Screw jack, linear drive, linear gear, lifting gear, screw jack, spindle drive, electric actuator, valve drive, actuator, servomotor, screw jack, lifting drive -Spindle lifting gear: from double mitre saw elumatec DG 204 -Manufacturer gearbox: Atlanta, type 539 05 040 i 4 -Engine manufacturer: SEM, type DPM30E4 36 V 0.18 kW -Dimensions: 450/320/H130mm -Weight: 9.5 kg

Conveyor screw, transport screw, screw conveyor, conveyor technology, trough conveyor screw, trough conveyor screw -Conveyor screws: 2 pieces, 1x right / 1x left -Design: stable -Screw length: 555 mm without holder -Screw diameter: 315 mm -Screw pitch: mm -Tube diameter: 115 mm -Hole: Ø 35 x 80 mm -Price/Delivery: complete -Transport dimensions: 550/315/H635 mm -Total weight: 58 kg

clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, step blocks, clamping screws, T-slot screws, slot screws, T-slot nuts -Clamping tool clamping screw set with storage box -Type: various versions, see photos -Thread: M20 -Price/Delivery: complete -Dimensions box: 380/315/H60 mm -Total weight: 11.7 kg

Screw jack, linear drive, linear gear, jack, screw jack element, spindle drive, valve drive, actuator, lifting drive, trapezoidal thread spindle -Manufacturer: Pfaff silver blue, screw jack -Type: SHE 2.5 -Useful stroke: 200 mm -Shaft: Ø 16 x 40 mm on both sides -Spindle head: bore Ø 25 mm -Dimensions: 465/190/H165 mm -Weight: 10.1 kg

Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Manufacturer: Demag / CompAir, screw compressor type 350WS / EK285NK without drive motor -Volume flow: 35.1 m³/min -Max. pressure: 7 bar -Drive shaft: Ø 90 x 120 mm -Individual components: see photos -Dimensions: 1100/670/H1000 mm -Weight: 1032 kg

Mono pump, metering pump, high-pressure pump, water pump, screw pump, progressive cavity pump, transport screw, screw conveyor, conveying technology, tubular screw conveyor, metering screw, screw metering -Manufacturer: Resch, dosing screw type RBL50D -Dosage: stepless, with frequency-controlled operation -Drive motor: 2.2 kW -Dosing control: Ströter Speed Commander Vector Digital -Inlet/outlet opening: Ø 80 mm, see photos -Usage: The pump was used to dispense ultrasound gel -Transport dimensions: 1810/730/H270 mm -Weight: 152 kg

Screw stand, screw stands, clamping devices, Atlas screw stand, threaded screw stand, clamping tool, threaded support, fixings, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -Fixators: 2 pieces, for machine tools and systems -Minimum height: 280 mm -Max. height: 468 mm -Submission/Price: complete -Dimensions (each): 220/190/H280 mm -Weight: 9.9 kg/piece

Screw stand, screw stands, clamping devices, Atlas screw stand, threaded screw stand, clamping tool, threaded support, fixings, leveling units, leveling elements, machine foot, machine feet, leveling shoes, machine foundation, leveling shoe, wedge shoe, machine support, leveling foot -Fixators: 10 pieces, for machine tools and systems -Dimensions: see photos -Submission/Price: complete -Transport dimensions: 440/210/H255 mm -Total weight: 24.4 kg

Screws, grub screws, for Bosch profile, construction profile, aluminum profile, aluminum T-slot profile, T-nut - Grub screws: Hex socket set screws with pin, 30 pieces -Thread: M12 left -Price/Quantity: 30 pieces -Price: 6 euros net for 30 pieces -Number: 4000 pieces in total -Transport dimensions: 600/400/H200 mm -Weight: 58 kg

Mono pump, dosing pump, high-pressure pump, water pump, screw pump, progressive cavity pump -Pumps: for tunnel boring -Adjustable speed: 120-600 rpm -Drive: 5.5 kW -Speed: 20-220 rpm -Pump capacity: 80-100 l/min -Max. pressure: 16 bar -Pipe connection diameter: DN 100 -Dimensions: 3900/470/H1070 mm -Weight: 722 kg

Weiler Commodor B incl. 3 - axis digital display - GS - Identifier - 3 - Axis digital display - Tip height 180mm - Center width 1000mm - Spindle passage56mm - Spindle speed 25-2000 rpm - Automatic longitudinal + face feeds - Thread / Metric / Inch / Diametrical / Module - Four-jaw chuck - Electric lining protection - 2x Emergency / Off - Swarf back wall - Coolant device - Work light - Multifix with inserts - Documentation Dimensions: LxWxH 2.5x1.3x1.7 meters / Weight 1500Kg

Lead & Pull Spindle Lathe / WEILER COMMODOR 230 AC -CE marking -Year of construction 2002 -Tip height 230mm -Circumferential diameter over bed 475mm -Circumferential diameter over face slide 270mm -Tip width 1000mm -Spindle speeds 25 - 2000 rpm -Automatic longitudinal/plane feeds -Tapping/Metric/Inch/Module etc. -Spindle head Din 55027 / size 6 -Tailstock MK 4 -Drive power 11KW -Electric lining protection -Multifix base holder with inserts -Three-jaw chuck -Swarf back wall with work light -2x Emergency / Off -Coolant device -Machine feet -Documentation Dimensions: LxWxH 2.6x1.1x1.6 meters / Weight 1900Kg

Key data: 72 mm, 28 , 50 U/min

Parallel twin screw extruder Cincinnati ARGOS 72R-28D Output capacity: max. 400 kg/h (depending on material and processing conditions) Power main drive: 47 kW (AC motor) Screw diameter: 72 mm, L/D = 28 Screw speed: max. 50 rpm Screw geometry for u-PVC pipe or technical profiles Original screws and barrels in very good condition 12 x Tool heating zones 3-ph/5-pin CEE 32A/10.5 kW 1 x adapter heating zone 1-ph/5-pin CEE 32A/5.5 kW 13 x TC Type J 16 mm Tuchel C70B 3-pin 4 m Incl. mass pressure and temperature sensor Successor interface: Interface 1 (analogue) and Can Open Bus 3 x Add on Plasticolor 0–10V Machine control Cincinnati EXc ProXP Horizontal conveyor incl. material hopper Total connected load: 184 kW Dimensions (L x W x H): 4,018 x 1,250 x 2,463 mm Weight: 4,700 kg Condition: used, overhauled & functionally tested

Code: 0350 Brand: FINI Model: KSC 5 - CE Standard Screw air compressor - CE Standard Motor 5,5 Hp Pressure 10 bar Rotational speed 1450 rpm Air flow 450 lt/min Tank capacity 270 lt Overall dimensions: mm 1350 x 600 x 1200 h - 168 kg

Screw ø 75-36D; approx. 600 kg/h A.C. Engine 182.0 kW

Main extruder : KME 1-90-36R, main drive 255 kW Co Extruder Inner Layer : KME 45-30 Co Extruder Outer Layer: KME 45-36BR, New Screw Condition : good, straight from production. Compact design, 1 common control cabinet Note : 3-layer pipe head up to 315 mm available

Main extruder : KME 1-90-36R, main drive 255 kW Co Extruder Inner Layer : KME 45-30 Co Extruder Outer Layer: KME 45-36BR, New Screw Condition : good, straight from production. Compact design, 1 common control cabinet Note : 3-layer pipe head up to 315 mm available

Oil-free screw compressor Atlas Copco ZR75FF Dryer integrated 75 kW 8.35 bar 11 m3/min Year of Make: 2004 Hours: 44,153

Kaeser DSDX243SFC screw compressor 132 kW with 8.5 bar and 26.90 m3/min. Inverter integrated. New stage installed at around 45,000 hours

Kaeser DSD202SFC screw compressor 110 kW 10 bar 20.30 m3/min Inverter integrated. Stage 1x exchanged New oil filter and oil.

For sale is a high-quality lead and pull spindle lathe from the renowned German manufacturer Weiler, model Condor VS 1. The machine convinces with its high precision, robust construction and durability and is in a very well-maintained and technically perfect condition. Ideally suited for the workshop, single part production and precise turning work. General information: Machine Type: Lead and Pull Spindle Lathe Manufacturer: Weiler Model: Condor VS 1 Year of construction: approx. 1977 Condition: Well maintained, technically perfect Availability: Immediately available Technical data: Max. turning diameter over bed: approx. Ø 330 mm Max. turning diameter via support: approx. Ø 170 mm Max. turning length: approx. 800 mm Bar passage: approx. Ø 38 mm Spindle: Speed range: approx. 24 – 2,800 rpm Feed & Thread: Feed range: approx. 0.037 – 1.253 mm/rev  ...

Continuously serviced, excellent condition. Atlas Copco ZR160 VSD screw compressor With speed-controlled drive, adsorption dryer MD400 Compressor: Manufacturer: Atlas Copco Type: ZR 160 VSD Max. operating pressure: 8.6 bar Variable speed drive Cooling water consumption 2.1 liters/s Air supply: 27 m3/min Water cooled Oil free Power: 163 kW Year of construction: 2002 Uptime: 122499 Last service: September 20, 2023 Refrigerator: Manufacturer: Atlas Copco Type: MD 400 W Year of construction: 2002 Max. operating pressure: 10.5 bar Empty volume: 199 l

Super silenced compressor, screw, 380 volt power supply, 8 bar pressure, 10 Hp power, never used packed in its original packaging Overall dimensions: 1000 x 800 x 800 mm Weight: 150 kg Auction-ID: A7-45834-13

Super silenced screw compressor, 380 volt power supply, 8 bar pressure, 10 Hp power, never used and packed in its original packaging Overall dimensions: 1000 x 800 x 800 mm Weight: 150 kg Auction-ID: A7-45834-223

Super silenced screw compressor, 380 volt power supply, 8 bar pressure, 10 Hp power, never used and packed in its original packaging Overall dimensions: 1000 x 800 x 800 mm Weight: 150 kg Auction-ID: A7-45834-177

Super silenced screw compressor, 380 volt power supply, 8 bar pressure, 10 Hp power, never used and packed in its original packaging Overall dimensions: 1000 x 800 x 800 mm Weight: 150 kg Auction-ID: A7-45834-127

1 shaft with direct gear drive; Feeding spiral is driven by gearbox; Mouthpieces and spare parts are provided separately on pallet; Control cabinet with control (in need of renewal) is included; Length 3.70 m, width 1.10 m, height without hopper 1.35 m, hopper height 0.50 m, inlet opening 35 x 35 cm Current type: 3-phase AC; Operating voltage 380 V; connected load 2.5 kW, motor type KMR 160 M8; Engine power 11 kW; Engine speed 720 rpm. The plant was shut down in 2024. more photos on request

Super silenced screw compressor, 380 volt power supply, 8 bar pressure, 10 Hp power, never used and packed in its original packaging Overall dimensions: 1000 x 800 x 800 mm Weight: 150 kg Auction-ID: A7-45834-304

COMAC TWIN SCREW EXTRUDER EBC60, barrel with n. 2 x 60 mm. diam co-rotating screws, 42 L/D, spare : 2 screws and 1 barrel reconditioned to 100% performances, Mounted: screws + barrel in very good conditions, n.1 dosing unit with hopper, N.2 vacuum degassing points, d.c.132 kw Siemens main drive 400V 50 Hz, non-stop hydraulic screen-changer with 90 mm screens (available with fully automatic screenchanger, on separate request), hydraulic pack, fitted with strand die (available with water ring pelletizer on request) + stainless steel cooling bath with heat exchanging unit + air-blowing dryer, electric cabinet (for extruder, screen-changer, hydraulic pack), pelletizer for strands, TVV Cooling column for granule., constructed i n 2001, The line is offered totally or partially reconditioned (photos show the machine during reconditioning), installed power - used power in work: about 60-65% : 13 ...

ALMiG Screw compressor BELT 30-10 | 30 kW | 10 bar | Industrial quality For sale is a powerful and reliable screw compressor from the ALMiG brand (Made in Germany) – ideal for industry, production or larger workshops. Technical data: Manufacturer: ALMiG Kompressoren GmbH Type: BELT 30-10 Year of Make: 2009 Motor power: 30 kW Operating pressure: 10 bar Volume flow: 4.12 m³/min Drive: Belt drive

TECHNICAL DATA: Installed power: 15 kW Operating pressure: 10 bar INCLUDED IN DELIVERY: Container (500 l) Dryer Inverters

TECHNICAL DATA: Installed power: 15 kW Operating pressure: 10 bar INCLUDED IN DELIVERY: Container (500 l) Dryer

Boiler capacity: 270l; Maximum volume flow: 0.92m³/h; Motor power: 5.5kW; Refrigeration dryer: Yes; TD 270 ADV3: C100, HD6505.5 kW, 400V/50HzPressure: 10 barLanguage: GermanPainted on compressed air tank 270 l AD2000With refrigerant dryerHS code: 84148075

Turning length/ centre width 4m, Spindle inner diameter, Face Plate D 1000 m, Center height over support 360 mm, 2 Risings with roller jaw guide 1980 Retrofitted, Main spindle speed 215 - 355 rpm. Operations manual with circuit diagram, chip protection, Reversible steel holders, Supports have currently been overhauled, electric lock box, Weight approx. 15 tons, Guided tour possible, including attempted filming.

Cordless screwdriver DEFORT DS-36N-Lt 3.6 V new/unused 60 pieces

Screw compressor RENNER RSDK-PRO 3.0 year 2021 10 bar, 410 ltr/min, 3 kW, compressed air dryer RENNER RKT+0035 type 1481A 16 bar year 2020/21, S/N 200030820, 90 l pressure vessel BWB 366 913 11 bar year 2020

Two water-cooled chillers of the same size 6°C/12°C each 500-1300 KW cooling capacity, stored in their original packaging in a dry hall. No longer installed due to project stop. Original price 130.000 €

Weiler Condor B with Heidenhain 3 - Axle Digital Display -Circumferential diameter over bed 330mm -Turning diameter above the face slide 185mm -Tip height 165mm -Turning length 750mm -Spindle speeds 22-2800 rpm -Spindle passage 40mm -Tailstock quill holder MK 3 -Quill stroke 110mm -Total power requirement 3kW -Heidenhain 3 - Axis Digital Display -Multifix holder -Multifix cassette 3 pieces -3 jaw chuck Forkardt -div. machine key -Machine feet -LED work light -Lining protection with electrical shut-off -Revolver stop -Documentation/Instruction Manual Dimensions: LxWxH 1.8x0.8x1.2 meters / 1040Kg

Key data: 130 mm

Stock# UG6397 Used line for WPC (wood plastic composite) acoustic panels production. Line had been working on acustic panels with width 600 mm x length up to 6 m. Maximal possible width up to 900 mm. Line consist of: - Twin screw, co-rotating extruder by Weber (D) model DS 13.27. Machine has twin screws, each with diameter 130 mm. Working length LD = 27. Extruder is driven by el. motor 145 kW. Barrel has 12 heating zones, each with el. heaters 5.5 kW. Includes Transi-Tec mixing and dosing device and unused spare barrel. - Calibrating table by Techno-Plast with 4 pcs of vacuum pumps (each power 4 kW) and one blower with power 1.1 kW. - Pull-off with a saw by Techno-Plast, driven with motor 5.7 kW - Profile collection table - Vacuum pump (Busch) - ONI water cooling exchanger Line new in 2010.

\" Bundle of micrometers 0–50 mm – 7 parts – mechanical – used 7-part bundle of mechanical micrometers for external measurements in the range of 0–50 mm. • Total measuring ranges: 0–50 mm • Reading: 0.01 mm • Type: mechanical • Version: metric • Scope of delivery: 7× micrometer \" Auction-ID: A7-46417-220

\" Screw with disc measuring surfaces 25–50 mm U-screw measuring screw with disc measuring surfaces from the manufacturer Mitutoyo, type GMA-50. This version is especially suitable for measurements on grooves, wall thicknesses, thin components or heel measurements. The measuring device covers the measuring range 25-50 mm and has a reading of 0.01 mm. • Manufacturer: Mitutoyo • Type: GMA-50 • Measuring range: 25–50 mm • Reading: 0.01 mm • Measuring surfaces: Disc measuring surfaces • Design: mechanical, metric \" Auction-ID: A7-46417-216