screw presses used for sale

This LEISTRITZ ZSE60MAXX-48D was manufactured in 2012. A co-rotating twin-screw extruder, its designed for high-performance compounding of advanced polymer materials, including biodegradable polymers. Adaptable to various extrusion processes, its ideal for bioplastics, masterbatch production, or specialty compounding. Contact us for more information about this machine.

Key data: 20 mm, 25

single-screw laboratory extruder Collin E 20 M Output capacity: max. 5 kg/h (depending on material and processing conditions) Screw diameter: 20 mm, L/D = 25 Screw suitable for processing PE/PP (condition: excellent) Heating capacity cylinder: up to 300 C incl. mass pressure and temperature sensor Incl. motorized lifting device for the height adjustment of the processing unit incl. material funnel incl. clamping flange for nozzle attachment Total connected load: 17 kW Dimensions (L x W x H): 1,450 x 800 x 1,900 mm Weight: 300 kg Note: including complete documentation Condition: used, function-tested

1.0 PCS screw compressor system consisting of the The following components: 1.0 pcs Screw Compressor, Manufacturer: Almig, Type: Belt Drive 15 , Year of manufacture: 2013, Operating pressure: 10 bar, power 15 KW 1.0 pcs. Compressed air dryer Manufacturer: Prematic 1.0 pcs pressure vessel 1.0 Sr. Oil Separator

Key data: 75 mm, 30

Single Screw Extruder Cincinnati TALOS 75-30G Output capacity: max. 450 kg/h (depending on material and processing conditions) Screw diameter: 75 mm, L/D = 30 Screw geometry for processing HDPE/PP 11 x Tool Zones incl. TC Type J ITIB 3-pin Thermal Probe incl. mass temperature and pressure sensor Interface for succession via CAN Open Bus Machine control Cincinnati EXcXP-touch Drive power main motor: 125 kW Total connected load: 178 kW Machine weight: 2,200 kg Remark: incl. spare engine (used) without material hopper Condition: used, function tested

Manufacturer: KAESER Model: BSD 72 SFC Year of Manufacture: 2012 Machine type: Screw Compressor Rated Power: 37.0 kW Motor Speed: 2960 1/min Max. Operating Pressure: 8.5 bar Ambient Temperature: 3 degrees C / 45 degrees C

Key data: 2 , 10

New AGRE Alup screw compressor with filter unit (technically oil-free), for the operation of milking robots. IMMEDIATELY AVAILABLE from the Hengsberg warehouse in Styria! We are also happy to take care of the delivery and commissioning of the compressor and ongoing maintenance of existing compressors of the brands AGRE, Alup and Atlas Copco. Drive: Efficient IE3 motor with belt drive Control: Infologic² Connect Refrigeration dryer and 270 litre container integrated Includes filtration for technically oil-free operation Performance data Volume flow at operating pressure 9.5 bar: 0.29 m³/min Operating pressure min. / max.: 5.5 / 10.0 bar Total power consumption at 9.5 bar / full load: 3.7 kW Rated power motor: 2.2 kW Pressure dew point refrigeration dryer : approx. +3 °C Dimensions and weight Length x width x height 1540 x 600 x 1350 mm Weight 205 kg Compressed a ...

Key data: 5 , 10

Oil lubricated screw compressor Cooling: Air-cooled design Drive: Efficient IE3 motor, belt drive Control: Speed-controlled with frequency converter Control: Infologic² Connect Refrigeration Dryer: Integrated Filtration optionally available Performance data Volume flow at operating pressure 7.0 bar 0.33 - 0.75 m³/min Operating pressure min. / max. 4.0 / 10.0 bar Total power consumption at 9.5 bar / full load 7.7 kW Rated power motor; IP55 5.5 kW Oil volume 3.2 lt Pressure dew point refrigeration dryer approx. +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C Cooling air demand 1140 m³/h Free fan pressure 30 Pa Sound level 61 dB(A) Voltage / PH / Frequency 400 / 3 / 50 V / Ph / Hz Refrigeration dryer power (230V/50Hz) 0.19 kW Dimensions and weight Length x width x height 1540 x 600 x 1375 mm Weight 230 kg Compressed air outlet 1/2 "  ...

Key data: 7 , 10 , 1

Oil lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor with 1:1 direct drive Control: Speed-controlled with frequency converter Control: Aircontrol 5.0 (4-20mA) Refrigeration dryer: Integrated, refrigerant R134a Filtration: incl. cyclone separator Performance data Volume flow at operating pressure 7.0 bar 0.28-1.25 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 9.3 kW Rated power motor; IP55 7.5 kW Oil quantity 3.5 lt Pressure dew point refrigerant dryer (20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 1 / 46 °C ∆ T above coolant temperature 8 °C Cooling air requirement 2200 m³/h Free fan pressure 30 Pa Sound level 62 dB(A) Voltage / Frequency 400 / 50 V / Hz Refrigeration dryer power (230V/50Hz) 0.27 kW Dimensions and weight Length x width ...

Extrudeuse CM EVOLUTION PLAST type CM-EVO 230 Année. : 2019 Puissance : 50 KW Tension : 400 VOLTS Poids : 4000 KG

Type M14 M.A. 16,2 EFFICIENCY 27% TURN TO CLOSE 15 RATIO 16:1 MAX IT 136 MAX OT 2200Nm

GALLIC 16 N lead and pull spindle lathe with ACU-Rite digital display - Turning diameter over support 200mm - Turning diameter over bed 320mm - Tip height 160mm - Center width 1000mm - Speed range 45-2500 rpm - Spindle bore 40mm - Automatic feeds X/Z axis LxWxH 2.4x1x1.7 meters / Weight 1600Kg

VOEST DA 360 - Lead & Pull Spindle Lathe -Heidenhain digital display -Peak height above bed 400mm -Turning diameter over bed 800mm -Turning diameter over support 500mm -Turning length 1000mm -Rod passage approx. 87mm -Speed range 14 - 1000 rpm / 18x speeds -Automatic length / face feeds -Automatic input Z-axis -Tailstock MK 5 -Wedge bar chuck 250mm -Multifix base holder with insert -Work light -Machine feet -Documentation Dimensions: LxWxH 3x1.5x1.7 meters / Weight 3500 KG

General SKU269X293 MakeCollin TypeTeach-line E20T and BL50T No.9120 3914 Year of construction2014 LocationBarneveld Main Features Motor9 KW Inlet diameter30 mm L/D25 Specified Features - Single screw extruder MaterialStainless steel Single screw extrudercheck Screw diameter20 L/D25 Number of heating zones:2 Electric heatingcheck Air coolingcheck DC-motor1,1 kW, 400 volt, 1400 rpm Feeding with hoppercheck Max. temperature300°C Information With switchgearcheck Floorspace0,85x0,65 m Total height0,70 m Weight100 kg CEcheck Extra SpecificationsWith Teach-line film blowing line, type BL50T, dia. Take off rolls, 50 mm, roll width 200 mm, max bubble dia. 110 mm, speed 13 m/min, : winder dia. 52 mm, max pulling force 95N, max coil dia. 300 mm : Single screw extrudersCollinExtruders > Single screw extrudersBrand > Collin What you can expect from Foeth: -- Machine is ...

Lead & Pull Spindle Lathe EXCELLO - DLZ 500 SL -Tip height 250mm -Turning diameter over bed 500mm -Turning diameter over support 310mm -Center width 3000mm -Rod passage 65mm -Speeds: 28-1400 rpm -Automatic longitudinal/plane feeds -Three-jaw chuck 250mm -Four-jaw chuck 250mm -Multifix base holder with inserts -Bezel -Tool cabinet -Documentation Dimensions: LxWxH 5.5x1.4x1.6 meters / Weight 3500Kg

Guide & Tension Spindle Lathe GEMA LZ 200 -Three - Axis Digital Display "NEW" -Guided tours " VERY GOOD" -Tip height 200 mm -Center width 1000 mm -Turning diameter over bed 400mm -Turning diameter over support 200mm -Spindle passage 54 mm -Automatic longitudinal/plane feeds -Speed range 36-2200 rpm -Tailstock MK 4- Adjustment 200mm -Three-jaw chuck 250mm -Electric lining protection -Multifix with inserts -Coolant device -Work light -Machine feet -Chip tray Dimensions: LxWxH 2x1.2x1.6 meters / Weight 1800Kg

Lead & Pull Spindle Lathe NARDINI MS 125 E -Peak height above bed 150mm -Turning diameter over support 140mm -Tip width 500mm -Spindle speeds 50-2500 rpm -Spindle passage 34mm -Automatic longitudinal/plane feeds -Thread/Metric/Inch -Tailstock MK3 -Collet quick-clamping device with various collets 173E -Tool cabinet with machine-related accessories -Swarf back wall -Documentation Dimensions: LxWxH 1.6xx0.7x1.6 meters / Weight 1200Kg

Leit & Tension Spindle Lathe WEILER COMMODOR 180 GSD / New -Unused -Exhibition machine / zero operating hours -CE marking -3 - Axis Digital Display -Tip width 1000mm -Tip height 180mm -Spindle passage 56mm -Circumferential diameter over bed 380mm -Circumferential diameter via face slide 215mm -Speed range / gearbox 25-2000 rpm -Automatic longitudinal/plane feeds -Thread/Inch/Metric/Diametrical -Tailstock / quill cone MK 4 -Quill stroke 150mm -Coolant device -Multifix with insert -Three-jaw chuck 200mm -Work light -Swarf back wall -Documentation Dimensions: LxWxH 2.6x1.6x1.7 meters / Weight 2000Kg

Overview  This pilfer proof capping machine was manufactured in 2022 by the Spanish company CTM Ingeniería. It has been used for only 1.5 years under light operating conditions as part of an in-house production line. The company is now outsourcing its bottling operations, and therefore the machine is available for sale. It is in excellent condition and ready for immediate integration into a new production setup. Technical data  Capacity: approx. 1,200 bottles/hour (in a fully automated line) Cap type: Pilfer proof screw caps Head: Configured for 28 mm caps (interchangeable with other sizes) Bottle compatibility: Adjustable height, currently configured for small bottles Construction: Compact stainless-steel design Condition: Excellent, used for only 1.5 years Operation: Suitable for integration into automated bottling lines  

WEILER Intern 800R Ladder & Pull Spindle Lathe -Turning diameter over bed 300mm -Turning diameter over support 150mm -Turning length 800mm -Spindle bore 42mm -Speed range 40 - 2000 rpm -Automatic longitudinal/plane feeds -Thread/Metric/Inch -Tailstock MK 3 -Drive power 3KW -Multifix with inserts -Three-jaw chuck 160mm -Lining protection -Swarf back wall with work light -Interchangeable wheels -Drill chuck -Rod passage 42mm -Tool cabinet -Documentation Dimensions: LxWxH 1.8x0.8x1.6 meters / Weight 750Kg

TECHNICAL SPECIFICATIONS Description: Cement silos / building material silos Number of silos: 3 pcs. Version: 2 x single chamber / 1 x double chamber silo Capacity: 3 x 100 tons. Number of screw conveyors: 4 pcs. SPECIFIC COMMENT - Also available individually - Incl. pneumatic compressed air filling - Incl. dedusting filter

Offer 26042 Operating hours 49500 h - Operating pressure 11 bar - Delivery rate 680 l/min. - Drive 400 V / 5.5 kW - Engine speed 2950 rpm - Air tank 200 L - Space requirement approx. W 600 x H 1600 x D 1000 mm - Weight approx. 250 kg

An Atlas Copco screw compressor is being sold. Bj 2022 Operating hours and technical data in the picture Plant has always been serviced and is sold due to cessation of operations If required, the pipes for the air supply can be purchased additionally. Machine has to be dismantled by yourself. The system is handed over by us without electricity. Article location Nuremberg All information without guarantee Available from June 2026 Inspection and test run is possible Sale only to tradespeople Price 8000 Euro net plus VAT Loading facilities available

Key data: 20 mm, 150 , 2150 U/min

with PE screw, Capacity approx. 350 kg/h complete with motor, gearbox and Heating tapes Good condition, immediately available

Key data: 170 mm, 350 mm, 3250 U/min

Lead and pull spindle lathe Colchester Master VS 3250 Tip height 170mm Center width max 750mm Circulation over bed max 350mm Circulation via cross slide 196mm Spindle bore 42mm Spindle D1-4" Spindle speeds from 0 - 3250 by means of VFD and 3 gear stages Tailstock MT4 Incl.: Digital display on 3 axes Elesta Quick-change steel holder Multifix with 7 tool holders 2pcs 3-jaw chuck 160 and 250mm with 3 set of jaws Collet holder with lever with 23 collets 173E Kornerspitse Drill chuck Coolant Pump Tool cabinet with tools and manuals Cleaned and maintained

Tip height: 125 mm Center width: 800 mm Gr. turning Ø over bed/over carriage guide: 280/245 mm Spindle holder, thread according to DIN 800 Spindle bore: 24 mm Spindle speeds infinitely adjustable: 26 - 2000 rpm 36 longitudinal feeds: 0.019 - 0.528 mm Metric thread pitches: 0.25 - 6 mm 44 Inch Thread: 4 - 112 Gg/" electr. Connection: 380 V, 0.7/1.4 kW Space requirements: Weight approx.: 500 kg

Tip height: 150 mm Center width: 760 mm Swivel Ø over bed/support slide: 300/165 mm Spindle bore: 32 mm Spindle holder, short taper according to DIN 55027: Gr. 5 Tailstock quill taper: MK 3 12 spindle speeds: 85 - 2000 rpm 48 feeds: 0.006 - 1.77 mm 48 metric thread pitches: 0.1 - 28 mm 58 Inch Thread: 75 - 2.5 Gg/" 19 module threads: 0.1 - 1.75 module 19 Diametrical Pitch Thread: 70 - 4 DP electr. Drive: 220/380 V, 1400 rpm, 2.2 kW Weight: 800 kg Space requirement: 1800 x 770 x 1300 mm

Compressor ALMiG VARIABLE 35 Screw Compressor Compressor ALMiG VARIABLE 35 Screw Compressor Manufacturer: ALMiG Type: VARIABLE 35 Year of Make: 2014 Volume flow: 1.00–6.05 m³/min Final pressure: 5–13 bar Motor power: 40.0 kW Engine speed: 1250–6500 rpm Serial Number: F1410719 / S0030700 Number of units: 2 Location: Pforzheim

Screw conveyors in different lengths and diameters. More than 20 pcs. available. Partly dismantled, partly still assembled.

Stock number: PM1576, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Eccentric screw pump, Construction: On a stainless frame, Dimensions: L 1050 x W 250 x H 330 mm., Motor: 2,2 kW - 220/380 Volt - 1400 rpm., Theoretical capacity: 7000 l/h, Working pressure : Max 4,5 bar, Dimensions inlet: Ø 40 mm., Dimensions outlet: Ø 40 mm., Manufacturer: Mono, Type: SH40A8

Guiding and pulling spindle lathe OPTIMUM "Optiturn 4210 V" With 3 axis digital display Year of Make: 2015 Spindle bore: 54 mm Center width: 1000 mm Center height: 200 mm Speed range: 30 – 3000 rpm Stepless speed with display With the following accessories: Multifix Tool Holder Coolant Setup Three-jaw chuck 0 200 mm Four-jaw chuck 0 250 mm Collet chuck complete with collets up to 0 32 mm Feed protection Chip protection with lighting Fixed Lynette 0 approx. 150 mm Moving Lynette 0 approx. 100 mm 4 Height Adjustable Machine Shoes 1 pc. Rotating centering tip Operating instructions

Screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor -Execution: stable -Drive motor: SEW Eurodrive 0.3/1.3 kW -Speed: 12/51 rpm -Case: stainless steel -Conveyor screw: Ø 150 mm -Conveyor screw pitch: 150 mm -Trough width inside: 170 mm -Screw: steel/stainless steel, higher torque -Dimensions: see technical drawing in the photos -Transport dimensions: 2120/300/H540 mm -Weight: 168 kg

Universal screwdriver, construction screwdriver, screwdriver, electronic screwdriver, power screwdriver, electric screwdriver -Nominal power consumption: 600 watts -max. screw capacity: M8 -Speed: 600/1800 rpm -Connection: 220 volts -Number: 34 universal screwdrivers available -Price: per piece -Dimensions: 320/200/H80 mm -Weight: 3.3 kg/piece

Screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor -Conveying length: approx. 2260 mm Execution: stable -Drive motor: SEW Eurodrive 1.0/4.0 kW -Speed: 690/28 2730/109 rpm -Case: stainless steel -Conveyor screw: Ø 150 mm -Conveyor screw pitch: 130 mm -Trough width inside: 170 mm -Screw: steel/stainless steel, higher torque -Dimensions: see technical drawing in the photos -Transport dimensions: 2870/760/H500 mm -Weight: 284 kg

Screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor - Execution: stable -Drive motor: SEW Eurodrive 0.3 / 1.3 kW -Speed: 12/51 rpm -Case: stainless steel -Conveyor screw: O 150 mm -Trough width inside: 170 mm -Screw: steel / stainless steel, higher torque -Dimensions: see technical drawing in the photos -Transport dimensions: 2960/300 / H600 mm -Weight: 154 kg

Screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor -Execution: stable -Drive motor: SEW Eurodrive 1.0/4.0 kW -Speed: 690/28 2730/109 rpm -Case: stainless steel -Conveyor screw: Ø 150 mm -Conveyor screw: 130 mm -Trough width inside: 170 mm -Screw: steel/stainless steel, higher torque -Dimensions: see technical drawing in the photos -Transport dimensions: 2240/760/H520 mm -Weight: 278 kg

Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod, ball screw drive, linear bearing, -Rexroth: R15104D977/R15104D973 -Shaft: Ø 38 mm -Thread length: 1150 mm -Number: 2x spindles available -Price: complete -Dimensions: 1710/330/H250 mm -Weight: 54 kg

Ball screw with nut, Transroll spindle, ball screw nut, screw spindle, threaded rod, threaded bolt, threaded rod, ball screw drive, linear bearing, precision ball screw -Manufacturer: Steinmeyerr, precision ball screw -Shaft: Ø 15.5 mm -Thread length: 770 mm -Price: per piece -Number: 2 piece -Dimensions: 950/45/H90 mm -Weight: 1.8 kg/piece

Recirculating ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod, ball screw drive, linear bearing, precision ball screw -Manufacturer: Star, precision ball screw -Type: 1502-2-1085 -Shaft: Ø 24 mm -Thread length: 1495 mm -Dimensions: 1700/110/H70 mm -Weight: 10 kg

Recirculating ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod, ball screw drive, linear bearing, precision ball screw -Manufacturer: Steinmeyerr, precision ball screw -Shaft: Ø 20 mm -Thread length: 525 mm -Dimensions: 680/100/H70 mm -Weight: 4.6 kg

Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod -Manufacturer: WARNER ELECTRIC -Spindles: are not used -Type: -Thread diameter: 39 mm -Thread pitch: 5 mm -Thread length: 455 mm -Total length: 630 mm -Number: 16x spindles available -Price: per piece -Weight: 6.3 kg

Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod -Manufacturer: WARNER ELECTRIC -Spindles are: unused -Type: -Thread diameter: 39 mm -Thread pitch: 5 mm -Thread length: 405 mm -Total length: 580 mm -Number: 17x spindles available -Price: per piece -Weight: 5.9 kg

Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod -Manufacturer: WARNER ELECTRIC -Spindles are: unused -Type: -Thread diameter: 39 mm -Thread pitch: 5 mm -Thread length: 505 mm -Total length: 680 mm -Number: 2x spindles available -Price: per piece -Weight: 6.8 kg

Screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor -Condition of the scre conveyor: very good -Execution: stable -Drive motor: hydraulic motor -Speed: 150 rpm -Diameter of the screw conveyor 200 mm -Small wing thickness: mm -Length of the screw conveyor: 4470 mm -The pitch of the screw conveyor: 95-195 mm -Opening can be closed hydraulically (dosing screw) -Number: 2x conveyor screws available (outlet different) -Price: per piece -Transport dimensions: 4470/435/H450 mm -Weight: 302 kg/piece

Screw conveyor, screw conveyor, screw conveyor, conveyor technology, injection molding machine, injection molding machine -Replacement screw tips: for injection molding machine -Number: 5x tips available -Sketches with the pictures -different sizes -Price: complete -Admission thread: 27 x 3 mm -Weight: 16.3 kg

Screw conveyor, screw conveyor, screw conveyor, conveyor technology, trough screw conveyor -Replacement screw: for injection molding machine -Execution: stable -Screw length: 1900 mm -Screw diameter: 60 mm -Screw pitch: mm -Pipe diameter: mm -Support: Ø mm -Transport dimensions: 60 x 1900 mm -Weight: 24 kg

Screw conveyor, screw conveyor, screw conveyor, conveyor technology, trough screw conveyor -Number: 3x replacement screws for injection molding machines -Price: complete -Execution: stable -Screw lengths: 1600/1560/1320 mm -Screw diameter: 60 mm -Screw pitch: mm -Pipe diameter: mm -Holder: Ø 55 x 75 mm -Transport dimensions: 1600/120/H100 mm -Weight: 90 kg

Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Handover in its current condition as inspected -defective, not functioning, problem: frequency converter does not communicate with the software -Delivery rate: 3.2-6.9 m³/min -Engine power: 18-24 kW -Structure: encapsulated -Max. pressure: 12.75 bar -Operating hours: 108252 h -Load hours: 30754 h -Year of manufacture: 2003 -Dimensions: 1850/850/H1900 mm -Weight: 592 kg

Hand screw press, arbor press, screw press, hand screw press, compression press, balance compression press -Manufacturer: Kalisz, manual screw press type YB-1 with solid base -Pressure: max. 10,000 kg -Stroke: 200mm -Intermediate size: 320 mm -Spindle holder: Ø 20 mm -Table size: 290 x 250 mm, slot width 14 mm -Dimensions: 1160/860/H1750 mm -Total weight: 350 kg

Screws, hexagon head screws, cylinder head screws with hexagon socket, Allen screw -Hexagon head screws: M20, DIN 931 -Weight: 514 kg -Sizes/number: M20 x 45 to M20 x 100, see photo parts list -Quality: 8.8 black or galvanized -Manufacturer: various -Price: complete -Total weight: 534 kg M20 x 40 mm, galvanized, 4 packs of 25 pieces = 100 pieces M20 x 50 mm, galvanized, 12 packs of 25 pieces = 300 pieces M20 x 60 mm, galvanized, 20 packs of 25 pieces = 500 pieces M20 x 65 mm, galvanized, 20 packs of 25 pieces = 500 pieces M20 x 100 mm, galvanized, 19 packs of 25 pieces = 475 pieces M20 x 45 mm, black, 1 pack of 25 pieces = 25 pieces M20 x 50 mm, black, 8 packs of 25 pieces = 200 pieces M20 x 90 mm, black, 5 packs of 25 pieces = 125 pieces

Ball screw with nut, transroll screw, ball screw nut, lead screw, threaded rod, threaded bolt, threaded rod, ball screw, linear bearing, precision ball screw -Manufacturer: Mikron, ball screw from CNC milling machine Mikron WF 51C/155 -Thread length: 540 mm -Shaft: Ø 32 mm -Dimensions: see photos -Dimensions: 870/140/H130 mm -Weight: 18kg