We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
swing diameter:400 mm control:840 D SIEMENS turning speeds:3500 1/min z-axis:340 mm x-axis:1350 mm workpiece height:400 mm Torque:820 turret head:12 Pos. rapid traverse:Z 30 / X 60 m/min tool holder:VDI 50 spindle head:A8 DIN 55026 spindle motor:60 kW weight of the machine ca.:14,8 t dimensions of the machine ca.:6 x 3,3 x 3,4 m live tools, C-axis, workpiece storage left side, high pressure pump, chipconveyor,
turning diameter: 235 mm turning length: 200 mm turning speeds: 6500 U/min control: Siemens 840D swing diameter: mm turning height: mm workpiece height max.: 100 mm spindle bearing diameter: 90 mm spindle head: A5 total power requirement: 41 kW weight of the machine ca.: 6500 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC lathe fabr. SCHERER-FEINBAU type SNC 80Machine -No: 8079 Year 1995Distance between centers: 350 mmCircumference diameter over bed: 320 mmCircumference diameter over support: 160 mmPath Z + X: 250 mmSpindle mount: DIN 55021 / A 3Speed range up to: 6000 rpm.Feed infinitely variable: 0.1 - 10000 mm / min.Rapid traverse: 10 m / min.Quill stroke: 125 mmDrive power: 7.0 kWWeight approx: 2.0 tOutside dimensions approx: 2100 x 1500 x 1900 mmWith- Siemens control 810 T- power chuck- Linear turret with 4 tool holders- Cooling deviceused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not bin ...
Specifications: Maximum turning length 90 mm Circulation diameter over bed 220 mm Circulation diameter over support 110 mm Center width 160 mm Bore 23 mm 3 speeds 350 / 700 / 1400 rpm ...
Specifications: Center height 110 mm Center width 160 mm Spindle bore 23 mm Motor power 1.7 kW in each case rotational speed via potentiometer To be set from approx. 100 – 2,300 rpm 3 preset speeds or 3 switching stages ...
Center height 110 mm Center width 160 mm Spindle bore 23 mm Motor power 1.7 kW . Speeds : 700 - 1400 - 2800 rpm . ...
This SCHERER FEINBAU CNC244/2 lathe was manufactured in Germany. This turning machine is equipped with spindle and counterspindle, two turrets for tools and a robot for picking up finished pieces. The turning diameter is 40mm. Pneumatic and hydraulic hoses were replaced recently. There are a bar feeder FMB turbo 5-42 XT, 17 tool holders (6 for powered tools) and clamping bushings for rods available with the machine.
1 x lathe Feinbau PM 1 FZ Facilities: - Hand lever cross support with Tripan quick-change system - additional steel holder single steel holder on support rear - Electric drill rig for thread cutting - collet tension with tension ingenuity Technical data: - Spindle passage: 23 mm - Spindle speeds: 700/1400/2800 rpm (left/right) - Peak height: 110 mm - Tip width: 160 mm - Groesster circulation over bed:220 mm Accessories: 20 x drawer tension erases partly new (1 - 20 mm round) 1 x Interchangeable Holder Tripan with 2 different casts 1 x collet + suit rod in tailstock Operating instructions (Copy) Machine can be inspected under electricity.
Hydraulic automatic lathe make FEINBAU type PM 1 / PUBMachine -No: 6018Technical specifications:Center height over bed: 125 mmTurning diameter over bed: 250 mmCenter height over support: 75 mmTurning Length: 160mm3 spindle speeds: 700/1400/2800 rpm.Dimensions L x W x H: 1250 x 700 x 1300 mmwith- Cross support- Longitudinal support- Tailstock- separate control cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
Mechanic lathe made by FEINBAU type PM 1 FMasch. -No: 1437 Year of construction 1960Technical specifications:Spindle passage: 23 mmTip height: 110 mmDistance between centers: 160 mmlargest swing diameter over bed: 220 mmlargest swing diameter over cross support: 110 mm3 spindle speeds: 700/1400/2800 rpm.Drive power: 0.22 / 0.3 / 0.5 kWWeight approx: 75 kgWith- Lever support- Lever tailstockused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine To ...