Tip height: 102 mm Top width: 450 mm Spindle bore: 32 mm Reduction gear Links.-right rotation 2-stage drive Vario speed: 270-3000 rpm Knee circuit Turning diameter over bed: 200 mm Spindle nose: W 20 Tailstock Quill: MK 2 Dimension (Lxwxh): approx. 140 x 56 x 123 cm Weight: approx. 550 kg Accessories available Manual available The machine is located in a clean good condition!

Tip height: 130 mm Top width: 450 mm Rotational speed: approx. 55-3000 rpm Pneumatic clamping system Spindle nose: W 25 Div. W25 collets available Div. holder available BERGER LAHR axis motors Combitec EIP E-500 control Manual control available Coolant system available Machine lamp available Machine feet available Dimension (Lxwxh): approx. 1400 x 560 x 1230 mm Weight: approx. 550 kg The machine is located in a clean good condition!

Tip height 102 mm Top width 450 mm Leit.-/ spindle Collets W20 available Rotational speed: approx. 210 3000 rpm Reduction gear Links.-right rotation 2-stage drive L x W x H: CA. 1760 x 595 x 1230 mm Weight: approx. 650 kg  ...

• more information

Inner grinding slide to Schaublin 102 lathe  ...

• more information

Technical data Centre height: 102 mm Distance between centres: 350 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 20.0 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: stepless from: 55 rpm up to: 3000 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Total power required: 2.0 HP Machine´s weight about: 500 kg Overall dimensions machine: Length: 1300 mm Width: 600 mm Height: 1300 mm Various accessories: pedal-operadet reversing switch 2 drawers Stepless speed variator Coolant system Lamp Headstock with reduction gear Quick closing attachment Cross slide with 90 mm stroke

Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 20.0 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: stepless from: 45 rpm up to: 3000 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Machine´s weight about: 550 kg Overall dimensions machine: Length: 1200 mm Width: 700 mm Height: 1400 mm Various accessories: Base-mounted type:: 102-82.000 2 drawers Stepless speed variator Headstock with reduction gear Driving plate Adjustable tailstock Drill chuck Cross slide with 90 mm stroke Fixed steady

Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 20 mm Inner taper type: 20 W Spindle speeds: number (steps): 24 from: 58 rpm up to: 2900 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.7 HP Machine´s weight about: 400 kg Overall dimensions machine: Length: 2000 mm Width: 800 mm Height: 1500 mm Various accessories: On work bench: Working bench: Length: 2000 mm Width: 800 mm Height: 900 mm Rear drive 3-jaw chuck diameter: 120 mm Set of collets: W 20 Set of centres Drill chuck Grinding attachment Fixed steady

Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 45 mm Inner taper type: 38 F Taper spindle threaded Spindle speeds: stepless from: 90 rpm up to: 2600 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Machine´s weight about: 550 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1400 mm Various accessories: Base-mounted type: pedal-operadet reversing switch Coolant system 3-jaw chuck diameter: 100 mm Quick closing attachment Drilling tailstock Lever operated cross slide

Technical data Centre height: 102 mm Distance between centres: 300 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Spindle hole: 20 mm Inner taper type: 20 W Taper spindle threaded Spindle speeds: stepless from: 55 rpm up to: 3000 rpm Taper in tailstock:: 2 MT Voltage 50 Hz 3x: 380 Volt Spindle motor: 1.5 HP Machine´s weight about: 450 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1400 mm Various accessories: Base-mounted type: Knee-operated reversing switch 2 drawers Stepless speed variator Driving system for milling and grinding attachment Belt-tensioning device for milling/grinding att. Headstock with reduction gear Set of collets: W 20 Drillin ...

Technical data Centre height: 102 mm Distance between centres: 375 mm Swing over cross-slide: 120 mm Swing over bed: 200 mm Inner taper type: 20 W Voltage 50 Hz 3x: 380 Volt Spindle motor: 0.5 HP Machine´s weight about: 130 kg Overall dimensions machine: Length: 1200 mm Width: 700 mm Height: 500 mm Various accessories: Working bench: Length: 200 mm Width: 700 mm Height: 900 mm Cross slide with 90 mm stroke