130,790 used machines on RESALE, but how to find them? Machine Search
BÜHLER Differential Weigh Weigher MSDG MEAF-30 Machines No.10366511 up to 12000 kg very good condition
BÜHLER Automatic Scale MSDL MEAF - 160 EX With pre-tank and post-tank From: approx. 900 x 290
DC motor Stromag 70 kW, gearbox 2 x 960 Nm, with Coperion ZSB 70 side feed. The worm shafts and the end head are missing. Therefore, sales as spare parts carriers.
Hydraulic power unit with pressure accumulator
REF-2497 DISMACK MULTIHEAD WEIGHER WITH 10 HEADS Multihead weigher with 10 weighing heads. It distributes the product among several weighers and performs weigh combinations until it reaches the closest to the desired target. Manufacturer: DISMACK. Specially designed for weighing solid or semi-solid granular products. It can also be used for weighing products wrapped in unit packages (sweets, muffins, etc.), as well as unit products (potatoes, cherry tomatoes, etc.). Voltage: AC 220 V, 50/60 Hz, 9 A. Power: 1.5 kW. Weighing capacity: 10 – 65,000 g. Volume: 1,300 ml. Speed: 70 discharges/min. Total combinations: 1,000. Overall dimensions: width 1,000 mm; length 1,100 mm; height 1,600 mm. Approx. weight: 300 kg.
Wipotec continuous scale 1500-1100-1000 RA2394 No Controller, optional retrofittable This belt conveyor is designed for products up to a maximum of 60 kg. Manufacturer: WIPOTEC Type: WM10 Year of construction: 2010 Total size: approx. 1500 x 1100x 520mm (WxDxH) Electrical connection 1x Light barrier 1x Sick Stegmann DKV60-E1Z0-S05 1x Closeness sensor for speed measurement Weighing technology: Weighing range: 0 - 60000 g calibration values e: from 10g degree of accuracy d: 1g TYP: IW-B 150K Conveyor belt 1500-1100-1000 and SEW gear motor Conveying length (FL): 1500 mm effective width (NUB): 1100 mm belt width (GB): 1000 mm hight (BH): 420-545 mm Motor Type: SEW Gearmotor Motor Power: kW 0.75 S1 Hz 50 Speed: 1,25 m/s Features: Nominal / outside width in mm: 700 scope of delivery: including supports without side guides, inklusive Frequenzumrichter, inklusive Lichtschranken Conveying length ...
filling capacity: 750 kg max. workpiece height: 900 x 300 mm workpiece weight: total 550 kg max. workpiece weight: 30 kg/Stck. revolutions per minute: 22 U/min filling amount: 50-60 % Colour: blau 5015 RAL 0: 1775 x 440 mm total power requirement: 3 kW weight of the machine ca.: 1995 kg dimensions of the machine ca.: 2,9 x 1,33 x 1,75 m Video available on our website.: Electric 400 Volt: New deburring machine for safe and to efficiently deburr workpieces. Suitable for heavy applications. The EVO model is available for light to medium workpieces. 6 - square drum lined with durable, vulcanized rubber thickness 36 mm, locking cover with gas pressure springs, roller shutters to protect againstthe rotating Container, stable design, easy operation. Control by timer on control surface, main and emergency stop switch. The maximum fillingquantity is 40% of the container volume and corresponds t ...
Optima EC automatic continuous scale 1390-750-1500 RA1259 The automatic checkweigher including conveyor belt and SEW gear motor is designed for products up to a maximum of 60 kg. Technical data (see PDF for further details) Manufacturer: Optima Control Systems GmbH (WIPOTEC-OCS GmbH) Type: EC Year of construction: 2000 Machine type: automatic checkweigher Total size: approx. 1390 x 750 x 1500 mm (WxDxH) Electrical connection Nominal voltage: L1/N/PE 230V AC / 115V AC (+6 % / -10 %) Nominal frequency: 50Hz / 60Hz (+/-2 %) connected load: 1,5 KW Fuse protection: 10 A Protection class: IP 65 according to DIN 40050 Weighing technology: Dimensions scale: approx. 600 x 750 x 1500 mm (WxDxH without conveyor belt) Type of measurement: electromagnetic force compensation Weighing range: 0 - 60000 g calibration values e: from 1g degree of accuracy: from +/- 0,5g Temperature: 5° C - 40° C relative ...
:::TECHNICAL SPECIFICATIONS::: CNC Model: ECS CNC Version: 4802 Self-centering diameter: 1500mm Turning diameter on the bench: 2000mm Turning diameter on the carriage: 1360mm Turning length: 4000mm Turret: automatic Number of tool turrets: 1 Number of tool positions for the first turret: 4 Number of fixed tool positions for the first turret: 4 Tailstock: yes Positioning: Automatic Chip conveyor: belt Machine equipment: Large steady rest up to 1300 mm small bezel up to 600mm Large boring bar diameter 150 by 2000 mm long
Motor power 11kW/ max. ultimate pressure 13bar Regular maintenance
Engine power 11 kW / max. final pressure 13bar Regular maintenance Engine should be replaced promptly
Vitronic Barcode Scanner with framework and additional PC RA1970 Manufacturer: Vitronic Components: with Item framework, fully mounted Power Suppla Module PSM-R3.2-115/230-240-23.5-60 LED line scanner 108963, 77005 and 108961 VICAM SSI2 112350 Line Scan CAmera LSC-AF-R4.2-100-var-8K-38.40-TX-TX-60 LED-Illumination LEDI-AF-R8.0-650-23.5-150-var-var-60 VIDU compact 12861 VIPAC Decode Unit Vers. 4.0 122244 Speed sensors and connecting cables. Year of manufacture 2019 Currently an error in the channel, as the connection to the other machine does not exist. But can be solved by technical support Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features:
Vitronic Barcode Scanner RA1941 Manufacturer: Vitronic Components: Power Suppla Module PSM-R3.2-115/230-240-23.5-60 LED line scanner 108963, 77005 and 108961 VICAM SSI2 112350 Line Scan CAmera LSC-AF-R4.2-100-var-8K-38.40-TX-TX-60 LED-Illumination LEDI-AF-R8.0-650-23.5-150-var-var-60 VIDU compact 12861 VIPAC Decode Unit Vers. 4.0 122244 Speed sensors and connecting cables. Year of manufacture 2019 Features:
Tub diameter 1900 mm Collection plate diameter 3200 mm Output depending on material 45 cbm/h
Collection plate diameter 1900 mm Volume throughput 12 cbm/h
Pig dehairing machine Baumann Dimensions: 240x100x145cm
Cross transport trolley for rails + scissor lift table with castors Brand: WTT Length 3000mm
Screen round feeder with the new vat and overweight gearbox. Tub diameter 1900 mm Throughput capacity 45 cbm
Screw conveyor, screw conveyor, screw conveyor, discharge screw - Type: Tubular auger - Screw length: 6024 mm - Drive motor: 3.00 kW - Speed: see nameplate - Housing: Galvanized steel - Screw conveyor: stainless steel 1.4301 - Screw conveyor: Ø approx. 490 mm
Standard Features 2 roller system for thorough depilation Head scratcher also for the difficult to access head area Mobile on 4 castors Newly developed, reinforced transmission Special rubber racket (also on the back wall) Electric heating in an oil bath Integrated control and operating unit in the machine housing Swing-out rollers for cleaning the machine
Screw press for cold pressing of oilseeds - Manufacturer: Reinartz - Type: AP 10/06 - Power: 7.5 kW - Processing capacity (rapeseed): 100 kg/h - Processing capacity (other oilseeds): 70 kg/h - Length: 1900 mm - Width: 600 mm - Height: 1100 mm - Weight: 900 kg
Control panel: Siemens SIMATIC HMI, connected load: 80kW, weight: 1.85t, operating hours: approx. 4500h, with Kreyenborg feed hopper, year of manufacture: 2017, and Trendelkamp screen changer. Documentation is complete, on-site inspection is possible.
Single-girder overhead crane Manufacturer: Demag Lifting capacity 8to Average track approx. 19.5m Lifting height min 6m With built-in crane scale / lifting weighing device. Hoist runs on the side of the beam so that the crane hook can be lifted to the lower edge of the beam. Crane system has already been dismantled. Optionally with approx. 2 x 50m crane rails.
capacity: 5 t condition: gut amount: 2 auf Lager Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
weight: 2,2 t extruder diameter: mm : : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
serial number: 711- 00 37 48 total power requirement: 11 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
max. grinding diameter: 400 mm grinding width: 0 mm max. module: min. module: total power requirement: 3 kW weight of the machine ca.: 4,2 t dimensions of the machine ca.: m Shaver cutter Ø, min./max. 64 - 320 mm Module range 1 - 12 Shaver cutter width, max. 40 mm No. of teeth 13 - 240 Pitch block Ø 73 - 320 mm Speeds of workpiece slide 5 / 20 / 30 / 40 teeth per min. Grinding slide speed 690 rpm Grinding slide Ø 762 mm Grinding wheel swivelling (pressure angle) 5 - 21 ° Grinding slide swivelling (helical angle) 2 x 35 ° Grinding slide adjustment, vertical 240 mm Cutting speed 1 / 0.5 / 0.25 m/min Spindle drive 1.1 kW Total electrical load, approx. 3 kW - 500 V - 50 Hz Weight, approx. 4,200 kg Accessories / Special Features Machine is suitable for grinding internal and external shaver cutters. It is also suitable for master gears as well as cutters for gear shapers. Unfortunat ...
A vacuum filler for hot filling and a 4-head Alcoa capper are available. 1) Vacuum filler for hot filling, running direction: left-right, bottle formats: 1l VDF/0.5l NRW/0.33l Ale/0.75l Bordeaux, filling capacity: 5000 bottles/h. 2) 4-head capping machine Alcoa 28 MCA, year of construction: 1997, bottle formats: 0.5l NRW/1l and 0.75l Bordeaux, capping capacity: 5000 bottles/h. The two machines were part of a complete line. The capper can screw more than 5000 bottles/h, but it was limited by the filler. Both machines with complete documentation and dismantled. On-site inspection is possible. Individual purchase possible.
A 6-color Kammann screen printing machine is available. Disk diameter: 120mm, cycle time: 75 cycles/min, colors: 6, UV dryer: 4, number of spindles: 2x8. Documentation available. On-site inspection is possible.
Two manual capping machines and a pressure container are available. 1) Alwid capping machine, year of manufacture: 2004, operating pressure: 6bar-8bar, bottle height range: 81mm-257mm. 2) Bausch & Ströbel screwing machine, operating pressure: 4bar-6bar. 3) Müller K94073 pressure tank, year of manufacture: 2004, volume: 100l. On-site inspection is possible.
Two high-precision Wipotec checkweighers are available. 1) Wipotec OCS/EC, year of manufacture: 2014, throughput: 150 products/min, max. belt speed: 0.75m/s, weighing range: 200g-300g. 2) Wipotec OCS/HC-A-200, year of manufacture: 2014, throughput: 200 products/min, max. belt speed: 1m/s, max. weighing weight: 750g. Documentation available. On-site inspection is possible.
Three identical screening machines with blowers are available. Working width: 700mm, foot spacing: 950mm, screen dimensions X/Y: 1450mm/700mm, vibrator power: 2x 0.65kW, machine dimensions X/Y/Z: approx. 2500mm/1050mm/2850mm, weight: approx. 750kg. Documentation available. On-site inspection is possible.
Sweeping width: 1250mm, Sweeping brush: Roller brush, drive: hydrostatic, oil capacity: 25l, power: 6.7kW, machine dimensions X/Y/Z: approx. 1800mm/1300mm/1400mm, weight: approx. 1000kg, operating hours: 1063h. On-site inspection is possible.
An Eickmeyer flat printing machine with parallel lifting upper frame is available. Printing format X/Y: 500mm/800mm, max. screen frame dimensions X/Y/Z: 1050mm/520mm/30mm, max. workpiece height: approx. 140mm, operating hours: approx. 50h. Documentation available. On-site inspection is possible.
A screen printing machine ESC (Europa-Siebdruckmaschinen-Zentrum) overhauled in 2004 is available. Print format: 1000mm/1400mm, max. print material thickness: 7mm, max. screen frame dimensions X/Y: 1540mm/1800mm. Documentation available. On-site inspection is possible.
Print format: 960mm/1260mm, max. print material thickness: 35mm, screen adjustment X/Y: +/-15mm, squeegee speed: 0.2m-1.2m/s, max. print output: 850 pieces/h, machine dimensions X/Y/Z: approx. 2850mm/2200mm/1350mm. Documentation available. On-site inspection is possible.
Print dimensions X/Y: 880mm/1250mm, max. material thickness: 5mm, max. material weight: 3000g/m², max. frame dimensions X/Y: 1350mm/1590mm, max. frame profile height: 50mm, fine register adjustment: +/-16mm. Gripper edge: 4mm, squeegee and flood speed: 1.5m/s, squeegee angle adjustment: 60°/90°, cycle speed: 1050 cycles/h, infeed height: 965mm, outfeed height: 780mm, machine weight: approx. 800kg. On-site inspection is possible.
A small screen printing machine and a spray booth for print pre-treatment are available. 1) Screen printing machine (orange machine). 2) Spray booth SER.TEC. s.r.l. Cabina S / Apply Eco, year of manufacture: 2014. The system was only used for test purposes, as a print changeover took place. Documentation available. On-site inspection is possible.
Scraper capacity 20m: 108m³/h, outreach: 20m, boom angle of attack: 15°, slewing radius: 2080mm, clearing bucket width: 1170mm, volume: 1050l, steep angle: 320°, max. tractive force: 62kN, max. load torque: 322kNm, connected load: 47kW. Machine dimensions X/Y/Z: approx. 3200mm/2150mm/2350mm, weight: approx. 4600kg. On-site inspection is possible.
Speed: 3000/min, volume flow: 3.7m³/min, overpressure: 8bar, operating pressure: 4-13.5bar, oil capacity: 10l, connected load: 22kVA, length: 1500mm, width: 850mm, height: 1200mm, weight: 672kg. Including test certificates for the pressure vessels, speed-controlled with heat exchanger for heat recovery.
Path width: 1600mm, processing position: 50mm-1500mm, processing heads: 10x longitudinal scribes, longitudinal scribe line width: 50µm-100µm, laser power per head: under 40W. Laser head L400: wavelength: 10.6µm, output power: 400W, power stability: +/-2%. Machine dimensions X/Y/Z: approx. 3000mm/4500mm/4000mm, weight: approx. 5000kg. Including cooling unit PC 080 and supply cabinet. Retrofitting with 4x cross scoring is possible. Documentation available. On-site inspection is possible.
Center distance 11,000 mm Turning diameter 730 mm Drill height 500 mm turnable on the bench 1050 mm Motor power 22 kW
Center distance 5,000mm Height of the tips 600mm 105mm bar passage carriage equipped with grinding Machine in very good condition
Length from approx. 1400 mm to 4200 mm extendable. Working height adjustable from approx. 650 to 950 mm. Usable width approx. 500 mm. Frame galvanized, plastic support rollers. 8 feet, each with brakeable castors. At the end of the scissor roller conveyor there is a stop device, which can also be folded away.
Conveyor system for powder products. Stainless steel housing with stainless steel tube. Motor mounted at bottom of machine with screw feeding device. Infeed hopper with 230 liter volume. Capacity 3 to 5 m?/h depending on product. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Eddy current screening machine with belt drive Manufacturer: Kemutec KEK Type K 800 C Version - ATEX 2/3 D
Blitz Screw Compressor+ Blitz Refrigeration Dryer+ 2000 ltr. Compressed air tank 11 bar, compressor engine 37 Kw., 5.2 cbm/min. 10 bar
Control measuring range: 50g-150g, accuracy class: XIII(1), scale graduation: 1g, readability: 1g, product weight min./max.: 10g/500g, cadence: 90rpm, measuring speed: 0.52m/s. Documentation available. On-site inspection is possible.
maximum number of results exceeded
please refine your search
