samafor used for sale

The WS 316 SR is the ideal sampler for eliminating any risk of crosscontamination, as the entire system can be rinsed after the taking of each sample. It is also well suited to the sampling of very dirty or greasy sample media, as warm water rinsing is also available if desired

Fully automatic slicer / packaging line with marking system Cutting / Depositing / Packaging / Weighing / Marking KUCHLER S.A.M. PX3 Specifications: Type slicer: SAM PX3 Type of foil dispenser: SAM IL - 4 - 220 Airless Type Packer: SAM KP 21 Airless Type Weighing & Labeling Unit: Mettler Toledo PAZ UC-GTT-M, 3/6 kg 400 volts / 50 Hz / 3.8 A Year of construction of cold cuts & packaging line: 2018 Year of construction of weighing & labelling unit: 2018 Film size: 21 x 26 & 21 x 21 cm several layers on top of each other can be welded Performance up to 150 packages per hour Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 330 mm Stainless steel knife, teflon coated including original knife grinder including original knife lifter including original operating instructions Original price in this version approx. EUR 52.000, ...

Manual slicer with integrated packaging module KUCHLER S.A.M. 300 psh + foil machine + packer Specifications: Type slicer: SAM 300 Psh T Type film dispenser: SAM IL - 4 - 220 Airless Type Packer: SAM T 26 230 volts / 50 Hz / 3.24 A Year of construction: 2009 Film size: 21 x 26 & 21 x 22 cm several layers on top of each other can be welded Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 300 mm Stainless steel knife, Teflon coated including original knife grinder including original knife lifter Luminous flux Function tested, machine immediately ready for use! Condition, see original pictures! If you have any questions, email or call.

Manual slicer with integrated packaging module KUCHLER S.A.M. 300 psh + foil machine + packer Specifications: Type slicer: SAM 300 Psh T Type film dispenser: SAM IL - 4 - 220 Airless Type Packer: SAM T 26 230 volts / 50 Hz / 3.24 A Year of construction: 2010/2011 Film size: 21 x 26 & 21 x 22 cm several layers on top of each other can be welded Cutting thickness adjustment: 0.5 to 12 mm Knife diameter: 300 mm Stainless steel knife, Teflon coated Luminous flux Function tested, machine immediately ready for use! Condition, see original pictures! If you have any questions, email or call.

Horizontal flow pack machine. This Flow Pack packaging machine consists main machine, coil unwinding group, conveyor belts for loading and unloading the products and control panel.

SPECIFICATIONS: Double Circular Saw - 1 fixed saw blade - 1 movable saw blade for special angle cuts Max. working length mm: 1500 Saw blade diameter mm: 250 X - Y Blade Position 2 pneumatic clamping jacks

COMPRESSORS SAMSUNG YOM: 2014 Models: SM5000-1000; SM5000 Equipment Summary: Turbo Compressor - 5 units: SN1:CE0518M102 Yr.2014; SN2:3210344-30 Yr.2008; SN3:3210344-40 Yr.2008; SN4:3210344-20 Yr.2008; SN5:3210344-10 Yr.2008 Air Dryer - 8 x 3.6cu.m drying towers - 4 units C/Water Pump - 55kW/75Hp - 7 units Receiver Tank - 20.3cu.m - 2 units Cooling Tower - 1,560,000Kcal/hr - 1 unit Cooling Tower - 250RT - 1 unit Cooling Tower - 400RT - 3 units Control Panels Accessories/other items: Spare parts: Dryer Heater Flange, pump motor spring mounts etc. Filters Connecting pipes Weight: 45.800,00 Capacity: 7200Ncu.m/hr; 1250hp x 1 unit; 1100hp x 5 units Make SAMSUNG Serial SN1:CE0518M102 / SN2:3210344-30 / SN4:3210344-20 / SN5:3210344-10 SN3:3210344-40 Model SM5000-1000; SM5000 Year 2014 Capacity 7200Ncu.m/hr; 1250hp x 1 unit; 1100hp x 4 units ...

2684 kW ‘’SAMKWANG’’ (2010) 2 CUMMINS Engines 1342 kW each; Gross/Net tonnage 314/94; L X B X D: 30.59 x 9.40 x 4.20 M Hull Material: Steel Draft: 3.627 Meter Fuel Capacity: 91,504 L Maximum Speed: 13 Knots Cruising Speed 11 Knots Engine Horsepower: 1,800 HP each Engine Cycle: 4 SN: 33180913/33180861 Auxiliary Engine: 2 Emergency Generator: 1 Model: Hull No. SKSB188 Capacity: 10 crews Make SAMKWANG SHIPBUILDING & ENG'G. Serial 00-0000778 Year 2010

Designation: Bar feeder Manufacturer: SAMECA Type: Quick Sam 45 Year of construction 1996 Condition: used, functional Delivery: ex site, including truck loading Operating instructions are available

- Rod length: 3000 mm - Total power: 1 kW - Machine weight: 800 kg - Dimensions (W x D x H): 4.7 x 0.5 x 1.3 m Details Guide tubes 10 and 25 mm, was mounted on an EMCO lathe ET242 Accessories Documentation

VERGELLA SYSTEM TO 2 PLACES PHOTOS SBOZZATOR BIFILARE COPPER "SAMP" A 13 MOD PASSAGES, MT 45.20 VERGELLA 8 MM. MAX 4.5 - MIN 1.13. VMAX 30 N/1' WITH INFUSTATOR, 35 N/1' WITH BOBINATORs. RECOTTURA "SAMP" MOD. R 45.2 N 2 VERTICAL ACCUMULATORS FOR STATIC BOBINATORs N 2 BOBINATOrS STATES CI "SAMP" MOD. SSI/800 FOR BOBINE FROM 630 A800 WITH ROLLER AND MOTORIZED REFORIATOR N 2 VERTICAL ACCUMULATORS FOR INFUSTATORS. N 2 INFUSTATORS "SAMP" MOD. AS/3 FOR 2- 2.5 TON DRUMS. TRAFILERIA "POLO/COSEMA" FROM 15,000 LITRI TO FABRIC NOT FABRIC WITH FORCE RECIRCOLO AND RESTRAINING EXCHANGER1 PLUS 1 SPARE 4 SET OF TWO IN WORKING AND TWO OF SCORTA

SAMAG MFZ 2-2 CNC milling machine was built in 2005 in Germany. This specially designed machine for the automatic machining of workpieces made of metallic materials has been equipped with two high-performance spindles and two work tables with a rotary axis, allowing for simultaneous machining of a part and loading/unloading of another. This solution maximises production efficiency and shortens production times, making the machine significantly distinguishable from other milling machines on the market. The machining, characterised by high quality and precision, is performed in automatic mode or in the setting up mode, using rotary tools taken from a capacious magazine. During its service life, the SAMAG twin-spindle milling machine has worked around 40000 hours and has been continuously serviced. The total weight of the machine is approximately 22 tonnes. Technical specifications of ...

COMPONENTS OF EACH PLANT: TRAFILATRICE "SAMP" 8 FILI MOD. MST/8/21 CABINA COMPLETE RECOTTURA "SAMP" MOD. RC 60 SYSTEM OF SAUNSTICS TO 8 PLACES DOWN VERTICAL AND SCARICO "POLO/COSEMA" FROM 10,000 L. CONTINUE TISSUE/NON FABRIC FILTER

"SAMP" MOD, MM 2 C COMPLETE OF VASCA FOR EMULSIONE. "SAMP" RECOTTURA FORNO. DYNAMIC COLLECTION BOBINATOR FOR BOBINE - 400

We sell 400 x 64GB PC4 2400T 4DRx4 Memory Modules/ Samsung 120 x 32GB PC4 2133P 2Rx4 Memory Modules/ Sk Hynix 50 x 32GB PC4 2666V 2Rx4 Memory Modules/ Samsung In most cases, the entire item can only be handed in completely. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many other refurbished/used hardware available from the areas of the systems mentioned here as well as from other systems of these manufacturers: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at a reasonable price from HASCON! The sale is only made to  ...

Differential pressure indicator, transmitter, monitor, senso, differential pressure indicator, differential pressure switch, pressure switch, volumetric flow controller, differential pressure controller, pressure reducing valve -Manufacturer: Samson, differential pressure regulator 2-6 bar -Type: 2440 Rg5 1/2 PN25 -Control valve: Samson Rg5 -Number: 2x controller available -Price per piece -Dimensions: 270/95/H90 mm -Weight: 1.2 kg/pc.

Te Koop: Samson for Type: 3804 Druk: 0.016 - 0.4 bar maximum druk 0.76 bar. Prijs is incl. BTW

Qty. 1 Second-hand aluminium foil rolling mill plant Mfc.: Marudhar, Sambhav Built: 1993 - 2012 Revamped: 2015 Foil width: 1000 mm Entry thickness: 8 mm Exit: 8 microns Consist of: Melting furnace 22 MT Holding furnace 15 MT Strip caster Roughing rolling mill Intermediate foil mill Finishing foil mill Heavy slitter Strip slitter Foil separator Qty. 2 Foil slitters Annealing furnace

Qty. 1 Second-hand JCO pipe press bending line Mfc.: Samyul, ROBO, Shinsung, ChangSong, Rotech, FANUC, Hyupshun, Ingersoll Built: 2003, 2008, 2009, 2013, 2014 Plate material: Mild steel Plate dim.: 16.0 x 5.2 x 0.08 m – L x W x T Pipe dia.: Φ400~Φ1650 mm Pipe Length: 6.0m ~ 16.0 m Scope of supply: JCO Hydraulic Press Tack Welder Machine Sealing Welder Pipe Heating & Rotating Device Inside Welder Outside Welder Calibration Presses Milling Cutter Cutting Machine Bevelling Machine Compressor

NEW SAMMIC Liquidiser with 3 x cutting heads on mobile base for soups omelettes, mayonnaise, 2 speeds 750 / 1,500 rpm

Manufacturer: Samsung Model: Excavator Built: 2004 Dimensions ( L x W x H ): 1700 x 1950 x 2400 mm

No. 4428: 1 gebr. Horizontal band saw Fabr. SAMUR, type S-1000 V, Bauj. 1966 Arb.-Ber.: 800 mm throughlet width, Accessories: Table Dimensions: 610 x 610 mm Table extension on the left with welding device Other: Cutting height 350 mm Cutting speed 20-800 mm Sheet length: 4,550 mm. Blade width: 4 to 15 mm. Speed infinitely variable Cutting speed: 23-711 m / min Electric motor 380 V

For sale: Samson Spring Safety DN32 PN16 GG25 6313 Order number: 7602.1 For more information, please call or send an email. Phone: 06-20758459 Email: wh.derikx@gmail.com The price is plus 21% VAT.

Turning diameter: 650 mm Turning length: 550 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: Oi TF MACH-id     6000 MAKE         SAMSUNG (SMEC) TYPE           SL 2500 A - V YOP              2018 SPECIFICATIONS Max. turning Ø   650 mm X-Axis                245 mm Z-Axis                 600 mm Spindle bore         78 mm Speedrange         4500 Rpm Spindle power        18.5 kW Control             Fanuc Oi TF Chip conveyor           Yes Tool eye          Yes Hours        1000 H Pino ...

Vario - Snow removal blade Samasz PSV 301. Universally hydraulically adjustable blade – wedge plough or side clearer left-right use possible. Working width max./min. 303/262 cm, blade height 80/98 cm, rubber skirting strips, special equipment: training wheel set, plough lighting, electric 12 volt cable remote control for light and hydraulic control block. 1 hydraulic connection dw required. Weight approx. 480 kg. Almost new condition. Further snow removal blades, snow blowers and slingshots as well as spreading technology in stock - see also sample photos! Info and offers on request. No sending of package deals or lists. Please name and phone no. for queries. Please let us advise you in advance by phone. Appointment required for viewing!

Indestructible Samiac 40Kg in very good condition for sale Year of manufacture: 2000 Gas: Propane gas Power: 3 phases 380V Capacity per batch: 40kg Including: - Raw coffee lift - Destoner - 2 chaff collectors Revised and put into conformity by the manufacturer in 2008 (Emergency stop added) Since then: - All bearings changed - Drum back plate refit - Cooling arm stops when someone get close to the cooling bin - Insulation of the combustion chamber replaced - Raw coffee lift motor replaced Between 20 and 30 tons roasted per year during the last 3 years (less before). Carefully maintained and greased by it's owner. Nothing to do except for a cleaning, drum motor oil change and maybe a bit of painting. It was in production until the end of June 2022 and is now dismantled Don't hesitate to ask us for more details or request more photos & videos. Ty ...

Screening machine Samag Type: Stainless Steel Screen area : 1100 x 600 mm Screen opening: [] 3 mm incl.: 1 vibration motor 0,15 kW Stock: 2 pieces

Brotschneidegatter, Fabr. Samach

Samsung SMEC SL 2500Y CNC Lathe C and Y axis 10 inches 6 pieces axial live tools 2 pieces radial live tools BMT 65 turret Fanuc control unit Chip conveyor Machine is in excellent condition

Samsung PL30L CNC Lathe Machine is in good working condition Turning diameter : 650 Turing length : 1050mm

Samsung Smec PL 35 CNC Lathe Turning Dia : 419 mm Fanuc control Machine is in good working condition

Coffee roasting oven: for sale production line - 2 furnaces by the French company SASA Samiac. Equipment still used in production, put up for sale due to the purchased larger furnace. Fill each kiln 60 kg. Possibility to buy one furnace.

This SAMAG MFZ 2-2 horizontal machine center was made in the year 2008 in Germany. It is equipped with a Siemens Sinumerik and has 5 axis. The machine has a spindle speed of 16000 rpm.

Deckel, Studer, SAMECA Item 1 CNC 3 axis milling machine Brand: Lid Type: FP 5NC Year of construction: 1986 Condition: Functional Without vice and 3 jaw chucks. Item 2 CNC cylindrical grinding machine Brand: Studer Type: S40-4 Year of construction: 1987 Condition: Functional Item 3 Designation: Bar feeder Manufacturer: SAMECA Type: Quick Sam 45 Year of construction 1996 Condition: used, functional

Photofast –HOT MELT” is a simple automatic gluing in machine able to glue pre-folded photos, WITHOUT or WITH the insertion of a board piece support. It’s an ideal machinery to form professional photo books,(even in big sizes), digital albums, photographical blocks and children books. TECHNICAL SPECIFICATION Minimum size: Height 152,4 mm Width 160 mm Maximum size: Height 480 mm Width 400 mm Weight for photos Min: 250 gr Max: 350 gr. Board support weight: Min: 250 gr Max: 350 gr (same thickness of the folded photos) Speed up to 30 cycles/minute Power 7 Kw Machine dimension: mm 1700x1500 x1700 H Export overall dimension: mm 2000 x 1600 x 2000 (H) Machine weight about 800 Kg Export gross weight kg 1000 Power supply 400 V 3 Phase N T 50/60 Hz to BE CONFIRMED Compressed Air approx. 200 Nl/h 6 BAR

Samco Unilev 15 Edge Sander Belt dimensions 150 x 2170 mm Two belt speeds Adjustable shoe Both countertops adjustable at 0-30 degrees Adjustable grinding height Attachment for curved linear elements Pneumatic tensioning of sanding belt

FREEZER CABINET, YORK SAMIFI FREEZERS SRL, MODEL: MIDI C/15 Technical features: Refrigerant: NH3/R717 Plates number: 16 plates Stations number: 15 stations Station size: 1835 x 1140 x 100 mm Dimensions: 2700 x 1620 x 2700 mm

Sliding table saw Fabr. Samco Model. Formula S2 Year: 1999 with Voritze with table spread with table publisher Motor 5.5 Kw Carriage 3200 mm with motor brake

Used milling machine Int. Art. Ref. m3458 Manafacture: SAMCO Type ROUTER Projection 500 mm Speeds 10,000-20,000 rpm. Power 1.5/2.2 kW Vertical running of the spindle 80 mm Höhenverst. of the table 150 mm Weight approx. 210 kg Pneumatic cables are new Electrics checked, connection cable new Location: 95233 Helmbrechts The machine can be viewed and tried out under power. We will be happy to send you more photos by e-mail. A forklift for loading is available. We reserve the right to make an intermediate sale. It is possible to expertly examine the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty / guarantee is ex ...

Temperature controller, temperature sensor, setting for temperature, signal converter, temperature converter, temperature monitor, thermostat, surface-mounted thermostat -Manufacturer: Samson, thermostat for temperature controller -Type: 2231 -Size: 150 -Temperature range: -10 to 90°C -Dimensions cardboard: 730/200/H70 mm -Weight: 3.6 kg

A striping machine for ceramics, for example. Built by German SAMA MASCHINENBAU GmbH. NEW only tried on. The price of a new one in 2006 was €39,250.00.

Fast mixer : 200 Liters, brand: Samstang, engine: 2 speeds 14/19 hp. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Frezarka górnowrzecionowa Samco ROUTER Spindle distance from arm 800 mm Spindle driving motor 3/2.2 kw Two spindle speeds 9000/18000 RPM Spindle tilt angle adjustment 45-045 degree Height-adjustable table Spindle control pneumatically from the pedal Worktop size 800×600 mm

SAMCO Unilev N15 Edge Grinder Two-speed sanding belt Pneumatic oscillation Adjustable table at an angle of 0-45 Sanding belt height 150mm Snap for curvilinear elements Sanding belt 2160x150mm Extraction nozzle 120mm Motor power: 3kw

Manufacturer: Sameca Type : MUZ.6.6 Year of construction 1996

This SAMAG TFZ 2L-1000 Drilling machine was made in 2015 in Germany and has 13585 production hours. It is equipped with a HEIDENHAIN control unit. It has a NC rotary table B-axis with 1100x1100mm (7t) and an a-axis as drilling and milling unit with swivel range -30/+15°. The machine has a reinforced main spindle drive with spindle speed 6000 rpm. As additional equipment it comes with tool changer for ISO 40, low-maintenance oil mist extraction system, traveling support steady rests for drilling diameters up to 25.5mm, drip tray with step grate for X-axis 1600mm and rinsing gun.

Table cutter, Blixer, make Kronen/Dito Sama/Electrolux Professionnel, type KE 180 S, year 2016, Cutter blender for fast liquifying, blending and chopping, Productivity suitable for 100 - 300 meals per shift., Bowl capacity (total): 17.5 liters - max. 8 kg batches,, variable speed control from 300 to 3000 rpm - 400V,, Rotor (3kW) with micro-serrated knives,, Boiler wall and lid scraper, was used to chop peeled ginger bulbs., Ingredients can be filled in during operation via the spout., Bottom mounted cover for better handling., Metal cover frame to ensure watertightness and avoid leakage., All parts that come into contact with food can be removed without tools., Power: 3000 watts., AISI 304 stainless steel bowl with non-drip spout and handles, easy to use., Scraper with easily removable handle., Variable speed from 300 to 3000 rpm, Membrane button control panel with IP65 protection., Lid  ...

Code: 0267 Brand: SAMCO Model: RP/2 Automatic bevelling machine for wooden shutter pallets Bilateral bevelling of blind slats Max workpiece size mm 750 Min workpiece size mm 140 Operating speed approx 1800 slats/hour Working pressure 8 kg/cm2 Slats loader Weight kg 170

max. turning diameter:395 mm turning length:490 mm control:Fanuc 0i-TF Manual Guide swing dia.:650 mm standard turning diameter:275 bar material dia.:68 mm spindle bore diameter:76 mm travel -x axis:235 mm travel -y axis:100 (±52,5) mm travel -z axis:580 mm Spindle 1 RPM:4500 1/min Spindle 1 Power:18,5 kW Spindle 1 Torque:209,5 Nm Spindle 2 RPM:6000 1/min Spindle 2 power:7,5 kW Spindle 2 torque:51,9 Nm turret stations / rotary tool stations:12/12 BMT 55 Power rotary tools:5,5 kW RPM of rotary tools:5000 1/min torque rotary tools:35 Rotary tool holders:4 Rapid feeds x/y/z:24/10/30 m/min Rapid travel B-axis (parts transfer subspindle):24 m/min dimensions of the machine ca.:4125 x 1752 x 2085 mm total power requirement:50 kW weight of the machine ca.:4,2 t high pressure coolant:50 bar Knoll KF110/700 Spindle 1 Chuck:200 mm Spindle 2 Chuck:150 mm Coolant through Mainspindle to Chuck:10 bar  ...