saf memorax 2v used for sale

Safeline Model: Signature Metal detector Stainless frame, belt dimensions 1200mm x 150mm, aperture 200mm x 70mm, stop/start, with alarm, 3Ph

Safetech ST-Alarm-V2 Safety Weighing Cabin The latest generation of safety weighing cabins, the ST1 series, stands out characterized by an optimized design, especially with regard to personal protection for Working with toxic and active substances. All cabins are equipped with an alarm system and two alarm sensors. The sensors measure the flow velocity on the right and left side of the working opening. As soon as the flow velocity falls below a limit value, both an audible and a visual alarm are triggered. The key advantages at a glance: Unique directional airflow guidance through BAFFLE technology (patent pending) Virtually turbulence-free balance environment Suitable for the latest generation of microbalances Cabin design also enables pipette handling Alarm system with two sensors and data recording Vibration-free due to independent filter unit Easy to cle ...

Stainless steel safety work station. Protection class: IP 31 / working area IP 55.

Safeline metal detector, serial number: 89487, 100-240 V, 50/60 Hz, 330 watt, plastic rollers, roller width: 300 mm, clearance: 350 mm x 145 mm, total dimensions: 830 mm x 900 mm x 1150 mm.

Total folding length: 3100mm; Table/slide distance: 590mm; Approach speed: 75mm/s; Return Speed: 75mm/s; EQUIPMENT: • EC10 CNC driving axes: Y1/Y2/X/R • 4 stop fingers • EC20 bending simulation software • 2D with automatic calculation of bending sequence and press • Table with manual OB/S-3-C table dome • WILA NSCL Pro mechanical clamping • 2 sliding front consoles

Ladies and gentlemen, Below we can offer: Manufacturer: Make: 1 piece used continuous furnace, make: Safed Type: 11Bd40/24 Built: 2005 max. working temperature: 1100C Heating capacity: 60 kW Dimensions Length: 15,000 mm Usable width: 340 mm Useful height: 150 mm Heating chamber length: 2,380 mm Muffle, cooling channel new Prices and pictures on request All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We accept no liability for used material. Warranty e ...

Force of pressure: 150 t working width: 4300 mm clear stand width: 3600 mm stand projection: 300 mm maximum height: approx. 500/700 mm operating speed: up / down 41 - 65/10 mm / sec back gauge: 1000 mm Electr. Supply: 400 V, approx. 15 kVA kW weight: 14 t space: 4600 x 1950 x 3100 mm

Description: plasma cutting system possible welding processes: plasma cutting with standard gases plasma cutting with oxygen (fine cutting technique) -autogen-burning cutting cutting speed: per sheet metal base up to 8m/min cutting length (x-axis):4300mm cutting width (y-axis):2100mm cutting thickness for plasma cutting: -for stainless steel=max.130mm;for normal steel (liquid steel)=max.40mm -for light metals/ Alloys=max.150mm burner adjustment distance: 250mm Plasma power source: 1. Nertajet 320-640 (2x parallel) Insulation class H; Protection class IP 23; 30Hz 2. Nertajet 120H-Autonom Road dimensions: 6400x400x550mm cutting table Ground: 4500x2600x670mm Equipment: Smoke extraction via suction table Smoke disposal by filter system Cooling of Et Scheid IK-V 18 Plasma cutting torch Autogen cutting torch roadway (rail) length 6400mm cutting table length 4500mm To ...

Plasma cutting system with possible welding processes: plasma cutting, firing joints; TIG (TIG) on all metals and alloys; MIG on light metals and alloys and heavy metals and arc welding Source: Nertajet HP 120 (220V,24V,380V,415V,440V,500V) Multiple frequencies 50/60Hz burner: CPM 250 (flat electrode) cutting process under water Plasma cutting cutting speed approx. 8m/min. Marking via compressed air driven drills Equipment: rails; Control cabinet; Cutting portal; Tub; Burning pads; 1x Torch Machine dimensions: cutting system: L:4,40xB:2,30xH:1,80m Cutting tables: L:8,44xB:3,31xH:0,85m 2 pcs. Plasma generator connected in parallel Nertajet HP 120: L:0,83xB:0,65xH:1.3 3m Track 1: L:10,650xB:0,25xH:0,92m Left Side Track 2: L:10,650xB:0.25xH:0.57m Right Side Factory conditions:L:3,120xB:1,36xH:0,14m (5 pcs. for cutting table) Water tank: D=1100mm H=2000mm / 1 pc. storage pl ...

Metal detector without tape If you have any questions: 01718367957

; operational as of week 33

; available as of week 20/2014

; ready for immediate use

; ready for immediate use

Manufacturer: SAF Type: Oxytome 30 Working range: 6000 x 3000 mm Technology: Plasma oxyfuel Built: 2001 Equipment Hardware: 1x SAF Nertajet HP 125 Only very little use 2x SAF Nertajet HP 300 connected in series 1x autogen burner Without fuel cutting tables without filter system Div. Wear parts equipment Control & Software: DIGISAF 500 Machine control Other information: System is available from week 33 cutting performance see PDF assembly and commissioning on request; ready for use from KW 33

SAF Type: Multitome PMD Working area: 5000 x 2000 mm Technology: Plasma-Autogen Year : 12 / 1994 Equipment Hardware: SAF ZIP 5.0 (45A - 150A)(built year 12 / 2000) 1x autogen burner (interchangeable on same support) Without filter system Wear parts Equipment Control & Software: SAF Machine Control (NC System) system is available from KW 20 / 2014 assembly and commissioning on request; available from KW 20 / 2014

Working range : 2500mm x 6000mm 1 x Autogen 1 x Plasma 1 x Drilling unit HP Digital Process Control Plasma Source: Nertajet HP 125 Machine burner OCP 150 Without table and suction Option: suction table and filter unit assembly and commissioning on request; ready to use

; ready for immediate use

Safeline Pipeline metal detector 31652 Stainless frame pipeline metal detector, 150mm diameter aperture, with pneumatic reject,

Stainless steel dispensing-workbench suitable for weighing critical substances. The machine processes powderly, highly active substances (quantities from ca. 5 kg).

Technical data: -Equal water-cooled AC unit TIG TR 4,. -water-cooled MIG-MAG system DV - IV - XT - E. welding plant STH 400 for welding of: stainless steel, steel, aluminum, etc. -16 x welding program be selected with: -. Setting selection: Stick welding, Tig - welding AC / DC, MIG-MAG welding -Digital Volt + amp display -Welding current continuously adjustable by 10 A / 15 V to 400 A / 34 A - max welding current of 400 A max 60% ED 315 A 100% ED -Power 400 V / 43 A / 16 kVA -Heart monitor -Welding current rise - and welding power descent setting -Back fire setting -Gas before. - current setting -water cooled Tig welding - torch 8 m, lightweight design -E - welding cable + ground cable - water-cooled MIG - MAG torch â separate wire feed case DV - IV - XT for MIG - MAG welding -4 wheels - wire feed -Intermediate package welder - wire feed case 4500 mm -P ...

Safeline Model: Signature Metal detector Serial: 48597 stainless frame, belt dimensions 1800mm x 220mm, pnuematic reject, aperture 200mm x 100mm

Metal detector producer: Safeline model: 50H voltage: 100-240 VAC Freguency 50/60 Hz Power 330 W (Max)

Safeline Metal Detector Model: Signature Serial: 53973 Stainless Frame, belt dimensions 1800mm x 300mm, aperture 300mm x 120mm, pneumatic push arm reject with reject bin, 3Ph

Maximum turnerable diameter: 1040 mm Turning diameter above the wagon: 620 mm Maximum workable length: 5200 mm Spindle power: 40 kW CNC ECS Optical line measurement system Maximum flow between tips: 10 tons Machine complete with chip evacuator, 4-position hydraulic turret, safety shelters in compliance and spindle 3-jaw hydraulic self-centering AUTOBLOCK; Various accessories available (tool case, stretchers, lunettes...) EC 2018 remarking possibility

working length: 8000 mm working width: 3500 mm Power: 300 A Plasma source: Nertajet type: HP 300 CNC burner heads: 1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 13

Sheet thickness: 13,00 mm Sheet width: 3100 mm Depth rear gauge: 0 mm Maximum sheet thickness:    13mm Max. cutting length:        3.100mm Strokes on full length:     18mm Strokes in short 1000 length:46 Cutting angle:              0,5 - 3 ° Length backgauge:           0 - 1250 mm Number of down holders:     20 Approach speed:             125mm/sec. Control:                    TS 200  Power:                      30 kW Length:                     4.800 mm  Width:                      4.800 mm  ...

Key data: 240 Safan, 4100 E-Control CNC

Capacity: 240 t Folding length: 4100 mm CNC Brand: Safan CNC Model: E-Control CNC Max. bending length:        4.100mm Distance between column:    3.600mm Max. pressing force:        240T Dis. Beam – Table:          725mm Beam stroke:                335mm Troth beam:                 400mm Approch speed:              140mm/min. Working speed:              8mm/min. Return speed:               100mm/min. Adjustment X-Axis back gauge:1.000mm Number of controlled axis:  6 = Y1/Y2/V/Z1/Z2/Delta  Control:                    E-Control Touchscreen  Crow ...

Key data: 13

Sheet thickness: 13,00 mm Sheet width: 3100 mm Depth rear gauge: 0 mm equipped with Return to Sender equipped with Sorting system Maximum sheet thickness:    13mm Max. cutting length:        3.100mm Strokes on full length:     18mm Strokes in short 1000 length:46 Cutting angle:              0,5 - 3 ° Length backgauge:           0 - 1250 mm Number of down holders:     20 Approach speed:             125mm/sec. Control:                    TS 200  Sheetsupport:               yes  Safety guides:              yes  Power:                &n ...

Key data: 1380 Siemens, 15000 Sinumerik 850

Turning diameter: 1380 mm Turning length: 15000 mm Turret positions: 0 CNC Brand: Siemens CNC Model: Sinumerik 850 Swing over bed Ø:        1.380mm Swing over cross slide Ø:1.200mm DBC Turning Length:      15.000mm Spindle power:           98kW Tailstock spindle Ø:     230Ø Stroke pinole:           300mm Workpiece weight:        23.000Kg Speeds / ranges:         600Rpm Length:                  20.000 mm  Width:                   6.000 mm  Height:                  3.000 mm  Weight:                  60.000 kg  12 ...

Key data: 1380 Siemens, 10000 Sinumerik 850, 12

Turning diameter: 1380 mm Turning length: 10000 mm Turret positions: 12 CNC Brand: Siemens CNC Model: Sinumerik 850 swing over carriage 1200 4 chuck 1200 mm open steady rest motorized tailstock C Axis 360.000 work load 18.000 Kg Max. turning Ø:1.380mm X-Axis:        640mm Z-Axis:        10.000mm Spindle bore:  80mm Speedrange:    600Rpm Spindle power: 80kW ATC / revolver:12 Stroke pinole: 300mm Quill Ø:       230mm Length:        13.000 mm  Width:         4.500 mm  Height:        3.000 mm  Weight:        40.000 kg 

Sheet thickness: 8,00 mm void: 0 Table length: 2100 mm Table width: 0 mm Knife length: 2100 mm Maximum sheet thickness:        8mm Max. cutting length:            2.100mm Strokes on full length:         34mm Cutting angle:                  1,30 ° Length backgauge:               1.000mm Number of down holders:         13 Control:                        Touchscreen  Operated mechanical or hydraulic:Hydraulic  Power:                          15kW Length:                         2.680 mm  Width:& ...

turning diameter: 2400 mm turning length: 6000 mm control: Siemens 880T Turning diameter over slide: 1400 spindle diameter: 320 mm speed: 0.4 - 1000 m/min voltage: 380 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capacity: 100 t Folding length: 3100 mm CNC Brand: Safan CNC Model: EC 20 Touch Screen SAFAN DARLEY - E Brake 100 - 3100 CNC Servo Mechanical Pressbrake 3100 x 100 T MACH - ID 6347 Make: SAFAN DARLEY Type: E Brake 100 - 3100 Control: EC 20 TOUCH SCREEN YOP: 2017 Max. bending length    3.100 mm Distance between column     3.100 mm Max. pressing force    100 T Dis. Beam – Table       590 mm Beam stroke         300 mm Adjustment X-Axis back gauge     1.000 mm Number of controlled axis          X-Y1-Y2-Z1-Z2 Control        EC10 - 2D Power          11 kW Dimensions Length         4.000 mm Width           2.300 mm Heigh ...

Capacity: 200 t Folding length: 4100 mm (1) Down stroke / (2) Up stroke: 1   CNC Brand: Safan CNC Model: ARA Touchscreen MACH-id    6042 MAKE        Safan Darley Holland TYPE          E-BRAKE 200 - 4100 YOP            2010 SPECIFICATIONS Max. bending length    4100 mm Distance between column        4100 mm Max. pressing force          200 T Dis. Beam - Table         690 mm Beam stroke                  300 mm Approch speed         200 mm/min. Working speed         10 mm/min. Return feed               100 mm/min. Adjustment X-Axis back gauge        ...

Capacity: 80 t Folding length: 2550 mm CNC Brand: Safan CNC Model: TS1 MACH-id     5585 MAKE         Safan Darley Holland TYPE           SMK - K 80 - 2550 TS1 YOP             2003 SPECIFICATIONS Max. bending length        2550 mm Distance between column           2550 mm Max. pressing force           80 T Beam stroke         115 mm Approch speed          115 mm/min. Working speed        90 mm/min. Return feed             100 mm/min. Adjustment  X-Axis bac gauge        700 mm Number of controlled axis          X, R, Z1, Z2 Co ...

Capacity: 50 t Folding length: 2050 mm MACH-id      5319 MAKE          Safan Darley Holland TYPE            UCK 50 - 2050 YOP              1987 SPECIFICATIONS Max. bending length        2050 mm Distance between column       1600 mm Max. pressing force        50 T Dis. Beam - Table        350 mm Beam stroke      115 mm Table Width       100 mm Troth beam         400 mm Approch speed      60 mm/min. Working speed     10 mm/min. Return feed           53 mm/min. Adjustment X-Axis bac gauge        500 mm Number of controlled axis  &nbs ...

Sheet thickness: 6,00 mm void: 0 Table length: 0 mm Table width: 0 mm Knife length: 3100 mm MACH-id    5481 MAKE        Safan  TYPE          HVR 310-6 YOP             1994 SPECIFICATIONS Maximum sheet thickness     6 mm Max. cutting length        3100 mm Strokes on full length       45 mm Strokes in short    1000  length    90 Cutting angle      0.5 - 2 ° Length backgauge      1000 mm Number off down holders       17b Approach speed           125 mm/sec. Operated mechanical or hydraulic        Hydraulic Power         11 kW DIMENSIONS Length      ...

Capacity: 50 t Folding length: 2050 mm MACH-id    5319 MAKE         Safan Darley Holland TYPE           UCK 50 - 2050 YOP              1987 SPECIFICATIONS Max. bending length         2050 mm Distance between column       1600 mm Max. pressing force                 50 T Beam stroke           115 mm Table Width            100 mm Troth beam             400 mm Approch speed        60 mm/min. Working speed        10 Return feed             53 mm/min. Adjustment X-Axis bac gauge      500 mm Num ...

Capacity: 150 t Folding length: 4300 mm CNC Brand: Safan CNC Model: TS3 Touchscreen MACH-id    5213 MAKE        Safan Darley Holland TYPE          CNCL - K YOP            2002 SPECIFICATIONS Max. bending length          4300 mm Distance between column         3600 mm Max. pressing force          150 T Dis. Beam - table             590 mm Beam stroke                     200 mm Table Width       55 mm Troth beam        400 mm Approch speed     65 mm/min. Working speed       10 Return feed            41 mm/min.  ...

Capacity: 170 t Folding length: 3600 mm CNC Brand: Safan CNC Model: TS 3 Touchscreen MACH-id    5021 MAKE        Safan Darley Holland TYPE          CNCL-K YOP             2003 SPECIFICATIONS        Controll        TS 3 Touchscreen Pressbrake / Folding / Mech. / Hydr.    Pressbrake Hydraulic / Mechanical        Hydraulic Bending length        3600 mm Distance between column         3100 mm Press force        170 Ton Throat         400 mm Stroke        200 mm Die height        590 mm Backgauge stroke X in mm      1000 mm Number off controlled axis    ...

Capacity: 110 t Folding length: 4300 mm CNC Brand: _Unknown / Other CNC Model: Touchscreen TS3 MACH-id   4144 MAKE      Safan - Darley Holland TYPE        PLCS 110 - 4300 YEAR       1998 SPECIFICATIONS Controll    Touchscreen TS3 Pressbrake / Folding / Mech. / Hydr.   Pressbrake Hydraulic / Mechanical         Hydraulic Bending length        4300 mm Distance between column         3600 mm Press force         110 Ton Throat       400 mm Stroke         180 mm Die height      480 mm Backgauge stroke X in mm      1000 mm Number off controlled axis      4 Power       7.5 kW  ...

Capacity: 25 t Folding length: 1250 mm CNC Brand: _Unknown / Other CNC Model: ARA Touchscreen TS1 MACH-id   4147 MAKE       Safan Darley TYPE         SMK 15 - 1250 TS1 YEAR   1999 SPECIFICATIONS Controll        ARA Touchscreen TS1 Pressbrake / Folding / Mech. / Hydr.        Pressbrake      Hydraulic / Mechanical      Mechanical Bending length     1250 mm Distance between column        1250 mm Press force           25 Ton Stroke        115 mm Backgauge stroke X in mm         600 mm Number off controlled axis     3 Power     6 kW DIMENSIONS Length      1600 mm Width&nbs ...

Capacity: 110 t Folding length: 3100 mm CNC Brand: _Unknown / Other CNC Model: ARA MACH-id   4026 MAKE       Safan Darley Holland TYPE         CNCS 110 - 3100 YEAR        1989 SPECIFICATIONS Controll    ARA Backgauge Pressbrake / Folding / Mech. / Hydr.   Pressbrake Hydraulic / Mechanical      Hydraulic Bending length     3100 mm Distance between column    2550 mm Press force       110 Ton    Stroke           300 mm Backgauge stroke       X in mm     0 - 1000 mm Number off controlled axis     4

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Cutting-off wheel diameter: from: 110 mm up to: 220 mm Number of cutting-off wheels Way of the table: 60 mm Spindle speeds: from: 3500 rpm Voltage 50 Hz 3x: 380 Volt Power: 2.0 HP Machine´s weight about: 410 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1400 mm

Capacity (x): 0 Process Application: 0   Other Info: 0 Technical data Cutting-off wheel diameter: from: 100 mm up to: 220 mm Number of cutting-off wheels Way of the table: 60 mm Spindle speeds: from: 3500 rpm Voltage 50 Hz 3x: 380 Volt Power: 2.0 HP Machine´s weight about: 410 kg Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1600 mm

Inv. Num. : 3861 Type: L-K 120-3100 TSI Producer: SAFAN Created: 2002 Parameters: Control system: SAFAN Pressing force: 1200 KN Bending length : 3100 mm stroke: 180 mm Dimensions: 4200 x 1650 x 2775 mm Machine weight: 8700 kg

Amperage range maximum: 480 A Amperage range minimum: 50 A (1) TIG / (2) MIG: 2   Material thickness (maximum): 0 mm Material thickness (minimum): 0 mm MACH-id   318 MERK  SAF AIR LIQUIDE TYPE  MIG 500 BLX SW YEAR  2000 ? SPECIFICATIES Voeding / power source in AMP  50 - 480 Amp AMP AFMETINGEN Lengte  925 mm Breedte  580 mm Hoogte  1200 mm  

Workpiece weight: 0 kg Table diameter: 800 mm Table  Ø:            600 + 800 mm Table load on 200 mm:650Kg Table load on 400 mm:200Kg Table load on 1000 mm:100Kg Rotation table:      0,076 - 1,5 ° Length:              1.200 mm  Width:               800 mm  Height:              800 mm  Weight:              500 kg 

Sheet thickness: 6,00 mm void: 3100 Table length: 0 mm Table width: 0 mm Knife length: 0 mm MACH-id  3505 MAKE   Safan Darley Holland TYPE  B Schear YEAR   2007 SPECIFICATIONS Controll   CNC Touchscreen Guillotine / Lazer / Cutting table   Guillotine Cutting lenght  3100 mm Maximum sheet thickness   6 mm Backgauge stroke X in mm1000 mm DIMENSIONS Length  3800 mm Width   2200 mm Height  2100 mm