saeilo style used for sale

turning diameter: 720 mm turning length: 2000 mm control: 840D SL + ShopTurn Siemens greates pass round over bed: 720 mm swing diameter over face slide: 460 mm bed width: 433 mm turning speed range - main spindle: max. 2.500 U/min power capacity - main spindel: 18,5 kW spindle bore: 105 mm spindle head: D 1-8 diameter of quill: 100 mm taper of center: MK 5 quill stroke: 200 mm weight of the machine ca.: 6,1 t dimensions: 4,3 x 2,35 x 2,15 m Lathe cycle controled VDF BOEHRINGER - DUS 560 / 3000 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 470 mm turning diameter over slide rest: 300 mm turning length: 1000 mm spindle bore: 58 mm turning speeds: 20-2000 U/min total power requirement: 5,5 kW weight of the machine ca.: 1800 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 500 mm turning length: 1250 mm control: 828D SL + ShopTurn Siemens greates pass round over bed: 500 mm swing diameter over face slide: 280 mm bed width: mm turning speed range - main spindle: max. 3000 U/min power capacity - main spindel: 9/13 kW spindle bore: 86 mm spindle head: diameter of quill: 100 mm taper of center: MK 5 quill stroke: 200 mm weight of the machine ca.: 2,5 t dimensions: 3,3 x 2,02 x 1,9 m Lathe cycle controled VDF BOEHRINGER - DUS 560 / 3000 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Lathe Saeilo Contur Dialog E-46 Manufacturer Ecoca EL-4610E Year of construction 2007 comes from research institute Control Siemens 810D Circumferential diameter over bed 460mm Orbit diameter overcarriage 250mm Drive power 40% ED 10KW Speed range 40-3000rpm Center width 830mm Tailstock quill MK 4 Spindle bearing renewed in 2021 The offer is aimed exclusively at traders within the meaning of §14 BGB no sale to private individuals!

x-travel: 660 mm y-travel: 510 mm z-travel: 560 mm CNC-control: Sinumerik 810 D ShopMill SIEMENS table-size: 900 x 485 mm max. table load: 450 kg spindle taper: SK 40 spindle turning speed range: 8.000 U/min feed stepless: 1 - 10.000 mm/min rapid traverse: 20 m/min drive capacity - spindle motor: 9,25 kW tool change unit: 20 Pos. coolant: chip conveyor: Spiralförderer voltage: 380 V total power requirement: 11,0 kVA weight of the machine ca.: 4,6 t dimensions of the machine ca.: 2,20 x 2,75 x 2,50 m - Serial-No.: 07010128 - control: Sinumerik 810 D ShopMill - electrical hand wheel - chip conveyor - coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

X-travel: 1000mm, y-travel: 600mm, connected load: 32kVA, length: 3200mm, width: 2100mm, height: 2900mm, weight: 6.2t, with documentation and measuring probe, the tool changer is defective, otherwise the machine is functional, an on-site inspection is possible.

Key data: 1100 mm, 585 mm, 600 mm

Control Siemens 828D Shop Mill Travel X/Y/Z 1100/585/600mm Speed 8000rpm Tool magazine for 30 tools SK40 Coolant through the spindle High pressure / Air through the spindle Spindle Oil Cooler Conveyor 3D probe system M&H IRP 25.41 Electric. Handwheel

Approx. Onsite Dimension. (l x w x h): 300 x 200 x 400 mm, weight approx.: 5 kg

ė engine capacity exceeding 1.1 kW (900 RPM). 310 x 250 mm grinding shaft. 2 clamping ė velen styles (the rubber surface), diameter 30 mm. the preparation of Į (i) the measurements x 350 x 655 mm, 505. the preparation of Į weight 20 kg.

Qty. 1 Second-hand ingot caster plantMfc.:Sistem TeknikBuilt:1/2015Stopped in 4/2015Recycling capacity:5000 Ton/annumQty. 12 Units of Pyrotek moldsDim. of aluminium ingot: 1000 x 1000 x 500 mmWeight:500 kgCharging material: Aluminium cans, profiles, sheets, motor blocks, wheels etc.Scope of supply:Aluminium shredderMagnetic separator Aluminium de-coating machine Baler Aluminium gas furnace Aluminium casting system Gas generator Mass ARUN spectrometer Air compressor, conveyors, forklift, ect.Shredder and magnetic separation conveyorMfc.:YSSType:Mono shaft shredder J600Capacity:500 kg per hour high power electrical shredding machineMono shaft shredder stylePLC automatic control unit Siemens?Hydraulic unit for material pushing to shredding wheelCurrent control for shredder reverse †safe usageShredded aluminium pass onto conveyor unitMagnetic separation system for steel removalElec ...

Stack machine for lumber length 2.0 m to 5.5 m plant suitable for the formation of stack widths of 1.0 m to 2.0 m heavy duty for double packages with intermediate lift table. System Board separation, registration, user location clamp, rotating tongue, Zwischenhubtsich and package cross conveyor. Complete with control. Stacking machine for timerlength of 2.0 up to 5, 5 m. Heavy duty style for double package 1.0 m up to 2.0 paketwidth! Complete equipment from unscrambler, even ending roller conveyor, layerbuilding with hydraulic stopper lifting table for double package including stacking unit in between.

Model:XL-308515R Size?W9.15L26H4.5m Frame: Hot galvanized steel frame,?601.8mm & ?401.5mm, made of Q215 steel tubes, according to the standard of GB/T700-2006. Cover: 300g PE, 420g or 610g PVC, double sides PVC coated fabric, gray, green & white color available. Door Style: Simple Mechanical Door. Door Size:As per customer requirements. Snow Load: 2.28kpa Wind Load: 80km/h Life Span: more than 15 year. Function: Industrial, agriculture, construction warehouse, vehicle storage, aircraft hangar, livestock raising. Feature: High strength, easy assemble and dismounting, large capacity, excellent stability. Advantages: a). Low Cost compared with steel structure warehouse and prefabricated house. b).All weather suitable, year round applicable.100% waterproof, fire resistance, flame retardant and UV inhibitor. Our Service: we have a professional team and the first class servi ...

LAMINATING SYSTEM POLYTYPE BB 2200 LAMINATION LINE Coating/- lamination equipment for solvent based resin system. On an existing film or composite material. Year: 2008 Condition: Excellent The different film thicknesses what can be used depending on the materials, see references: Plastic foils 25-250 microns Metal foils (copper, aluminium) 20-150 microns Total composite thickness max. 500 microns Machine data: Production speed 0 - 150m/min Production speed 840 - 2160mm Resin 1 - 40g/m2 Winding units (main winder-/ lamination winder-/tensilized film winder): For unwind of the base film there are two winders (main winder/ lamination winder). Winder performance: - Winding direction clockwise / anticlockwise - Brakes ystem for constant and regulated tension e.g. alu foil with max. 2000 kg roll weight - Roll system centerless for steel,plastic-, carton tubes with optimal  ...

1 x Francis Shaw model K1 Intermix MK4, M/c number: 4176, Date: Jan 1991, Net chamber volume: 5.5litres, NR2 style intermeshing rotors, Pneumatic hopper, Hydraulic drop door discharge, with Thrigge Scott 45kW DC variable speed motor. 2 x Tool Temp temperature control units. The mixer has been completely dismantled and the rotors, door top, drilled sides and floating weight have been refurbished and re-chromed.  All other components checked, serviced or replaced during re-assembly.  The mixer will be supplied with NEW control panel with PLC, touch screen PC with data capture.

Qty 1 x Pomini Model P270 Banbury internal mixer, M/c no. 362, Year: 1996, HDM style rotors (2 wing equivalent), PYH Dust stops, Hydraulic drop door discharge with Linear actuator, Vickers hydraulic power pack, Unidrive gearbox with couplings (11D type, 1000HP rating). Pneumatic hopper. Without motor or controls. Can be supplied with or without gearbox. Quote for new motor and controls on request.

+ ATTENTION - PRICE DROP! + Prices are rising, ours are falling! + Our prices are reduced by 50% now, + due to warehouse restructuring! + Also, consider taking a look at our other offers in stock. Profile Projector ISOMA M 108 A / Suisse manufacturer: ISOMA type: M 108 A mach.-Nr.: 866477 comm.-Nr.: 0202/050/130/0382 stock-Nr.: 1835 + Regular Price: 4.680,- € > Reduced Price: 2.340,- € BN + All prices are shown without taxes (net price) Technical Data (According to manufacturer) screen width: 550 mm screen height: 450 mm object table length: 170 mm object table width: 150 mm travel legth: 40 mm travel width: 15 mm glas table Ø: 85 mm voltage: 220 V / 50 Hz weight: 280 kg standing area: W 1.000 x D 800 x H 1.800 features Screen Size W 550 x H 450 mm object glas table insert vertical sled table micrometer spindle for legth and  ...

ARPAC M16632 Manufacturer: ARPAC USA Line date: 2018 new, original packed Product description: Plastic Jar, 35 jars (bottles) / Minute (per line) Packaging description: RSC Cases (regular slotted case) , tape sealed System description: ARPAC ARPAC developed an integrated solution for this end line packaging system. Product is received single lane, diameter-to-diameter, into an automatic cartoning machine. Cartons are pushed into the required case pack configuration by a pneumatic row pusher. Product is collated, packed into a case, and manually palletized. Labellers: Jars (bottles) arrive filled, sealed, and are already labelled One Jars are placed inside a carton, the flaps are sealed with glue and a printed label with date/lot code is applied. Once cartons are placed in case, the flaps are sealed with tape and a printed label with date/lot code is applied. F ...

GeneralVertical Machining Centres; Control: Control F0iMF CharacteristicsTable surface1400 x 560 mmMovement X / Y / Z1100/560/510 mmSpindle taperBT 40 Tool Magazine with60 PositionsDrive power (25% DC)15 kWDrive power (100% DC)11 kWSpeed max.12000 rpmMaximum load (table centre)1000 KgRapid feed X / Y / Z36/36/30 m/minDimensions (L x W x H)3,19 x 2,76 x 2,94 (3,82 x 3,58 x 3,01) mWeight approx.5500 KgStandard spindle 12,000 min-1, 15/ 11 kWStandard Spindle 12,000 min-1, 15/ 11 kW Spindle speed: 12,000 min-1 Output: 15/13/11 kW (20/17.33/15 HP) (25%ED/30min/cont) Torque: 119/70/57 Nm (87.76/51.62/42.04 ft·lbf) (25%ED/30min/cont)Spindle Taper 7/24 Taper #40/ Grip MAS Spindle Taper 7/24 Taper #40/ Grip MAS This specification uses the spindle No. 40 7/24 taper / Grip MAS tool holder. The grip type and retention knob type of ATC are specified separately.Retention Knob: Special (Center-Throug ...

Marchesini BA300 Continuous motion cartoner Automatic Bottle scroll infeed system Guk style leaflet folder Carton size range Width 25-100 Height 13-70 Length 78-150 Maximum mechanical output 250 CPM actual speed dependant upon nature of the product.

Dominioni Punto & Pasta Pasta extruder machine Stainless 8Kg hopper with agitator and stainless screw, variable speed, variety of extrusion plates for different style pastas, mobile

Key data: 630 _Unknown / Other, 3000 Style

Turning diameter: 630 mm Turning length: 3000 mm Turret positions: 0 CNC Brand: _Unknown / Other CNC Model: Style C-Axis Barufaldi Revolver 8 positions live driven tools SCHUNK chuck Renishaw taster Under power 02.2022 Swing over bed Ø:        630mm Swing over cross slide Ø:405mm DBC Turning Length:      3.000mm Spindle bore:            104mm Spindle power:           40kW Bed width:               450mm Tailstock spindle Ø:     105Ø Stroke pinole:           225mm Spindle taper:           5Mk Workpiece weight:        1.500Kg Speeds / ranges:         2000Rpm Feed rate X-Axis:        8.000mm/mi ...

Center height: 205 mm Center distance: 1000 mm Spindle bore: 52 mm PUMA - C410 Universal lathe Ø 410 x 1000 mm MACH - ID 6353 Make: PUMA Type: C410 YOP: 2012 Swing over bed Ø    410 mm Swing over cross slide Ø     255 mm DBC Turning Length      1.000 mm Spindle bore       52 mm Spindle power    5.5 kW Bed width           250 mm Tailstock spindle Ø     50 Ø Stroke pinole      120 mm Spindle taper       4 Mk Speeds / ranges    Vario 3000 Rpm Digital read out Variomatic RPM Multi fix style tool system 3 and 4 chuck BIG cabinet tools Length   2.000 mm Width    1.200 mm Height   1.400 mm Weight   1.200 kg &nbs ...

IWKA Model CP150 Automatic Horizontal bottle Cartoner. Capable of speeds up to 150 cartons per minute. Carton size: (Length) 20mm-90mm, (Width) 15mm-60mm, (Depth) 55mm-180mm. Set up for Reverse tuck style cartons. Has Embosse coding unit , GUK sheetfed leaflet feeder .

GIRO net packaging machine, type Girplus RS Classic Attractive appearance due to the central message on the pack header. Possibility to make the header with 1 or 2 flaps (see Picture 1) or without flaps (see Picture 2) Possibility to include or not include handle holes. Allows the use of registered Girfilm at both, one or none of the sides. Flexibility to utilize 90 or 119mm header width Handles up to 3kg without needing inner or outer reinforcement bands. 100% recyclable. Net and film fully made of polyethene. No additional raw material is used. Uses the same consumable materials for all different packaging styles. Thus affording the packer a stock cost-saving and facilitating stock management. Allows the use of self-adhesive labels up to 78 x 36 mm The Girplus-R welding machine offers the packer the possibility of making different bag styles with just one machine. RECOMMEN ...

Center height: 255 mm Center distance: 1350 mm Spindle bore: 75 mm MACH-id      5412 MAKE          STYLE HOLLAND TYPE            510 x 1350 YOP              2015 SPECIFICATIONS Max. turning Ø       510 mm Spindle bore        80 mm Speedrange         2500 Rpm Spindle power   11  kW ATC / revolver        8 x VDI-40 Pinole taper      5 Mk Stroke pinole         150 mm Quill  Ø     75 mm DIMENSIONS Length     3000 mm Width       2100 mm Height       1900 mm Weight       3200 kg

Turning diameter: 1300 mm Turning length: 4500 mm Turret positions: 1 Positions ATC: 142   Number controlled axis: 7   CNC Brand: Siemens CNC Model: 840D NILES SIMMONS N50/2 MC  TURN MILL DRILL MACHINING Make            : NILES SIMMONS Germany Typ            &nbs p; : N 50 / 2 MC x 4500 Age            &nbs p; : 2008   Swing over slide              : 1.250 Swing over bed               : 1.300 DBC turning length          : 4.500 Spindle bore     &nb ...

Manufacturer ARPAC Line date: 2018 new, original packed Product description: Plastic Jar, 35 jars (bottles) / Minute (per line) Packaging description: RSC Cases (regular slotted case) , tape sealed System description: PART ARPACK ARPAC developed an integrated solution for this end line packaging system. Product is received single lane, diameter-to-diameter, into an automatic cartoning machine. Cartons are pushed into the required case pack configuration by a pneumatic row pusher. Product is collated, packed into a case, and manually palletized. Labellers: Jars (bottles) arrive filled, sealed, and are already labelled One Jars are placed inside a carton, the flaps are sealed with glue and a printed label with date/lot code is applied. Once cartons are placed in case, the flaps are sealed with tape and a printed label with date/lot code is applied. Features: - (3) Print an ...

Spindle diameter: 150 mm Longitudinal X: 8400 mm Vertical Y: 3000 mm Cross Z: 700 mm Positions ATC: 0   Table length: 0 mm Table width: 0 mm Number of tables: 0   CNC Brand: Heidenhain CNC Model: iTNC 530 WOTAN Rapid 4 FLOORBORER iTNC530      Make            : Wotan Werke Dusseldorf Typ            &nbs p; : RAPID 4 A Mach.No       :   67 . 003 Age            &nbs p; : New iTNC 530 in 2010 / 82”     X   – travel                      : 8.400 Y   – travel     & ...

The Comitrol® Model 1700 processor offers the highest level of versatility in the Comitrol range. It has reduction heads of 152.4 mm (6") in diameter and is available in the three configurations below. The input product depends on the reduction head style, turbine selection and spacing within the head. In general, the maximum size of the incoming product must not exceed: Cutting head: 63.5 mm (2-1/2") Microcut head and cutting head: 9.5 mm (3/8") The sealed enclosure prevents the dispersion of dust, vapours and liquids when the Comitrol processor is installed in combination with a collection system. The stainless steel design ensures maximum durability and hygiene. The machine is equipped with contact parts with the stainless steel product, and offers continuous operation for uninterrupted production and simplified design for easy cleaning and maintenance. A sealed enclosure pre ...

GeneralPrecision centre - Linear drive package - Active cooling for spindle, linear drives and electrical cabinet - Frame temperatur control - Direct measuring system - Chiptray, coolant/airblast changing - Full cabin including 2nd door; Control: 3D-control Siemens 840D sl Operate Technical DataSpindle taperHSK-A 63 Feed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal650 mmCross600 mmVertical380 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools120 Floor space/WeightDimensions (L x W x H)7,28 x 6,63 x 3 mWeight approx.9600 KgRigid tableRigid table clamping area 850 x 600 mm // 33,46 x 23,62 inch loading weight max. 700 kg // 1543,23 lbsSpindle speed up to 28,000rpm Shaft CoolingSpindle speed 20 up to 28,000 rpm within shaft cooling inclusive MPC Machi ...

GeneralPrecision centre - Linear drive package - Active cooling for spindle, linear drives and electrical cabinet - Frame temperatur control - Direct measuring system - Chiptray, coolant/airblast changing - Full cabin including 2nd door; Control: 3D-control Siemens 840D sl Operate Technical DataSpindle taperHSK-A 63 Feed rate longitudinal/transverse/vertical1-80000/1-80000/1-80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minWorking area 1Longitudinal650 mmCross600 mmVertical380 mmTool changerType of magazineChain Type of gripperDouble gripper Number of tools120 Floor space/WeightDimensions (L x W x H)7,28 x 6,63 x 3 mWeight approx.9600 KgRigid tableRigid table clamping area 850 x 600 mm // 33,46 x 23,62 inch loading weight max. 700 kg // 1543,23 lbsSpindle speed up to 28,000rpm Shaft CoolingSpindle speed 20 up to 28,000 rpm within shaft cooling inclusive MPC Machi ...

GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal700 mmCross700 mmVertical700 mmMiscellaneousClamping SystemHSK-A 63 CabineFull protection cabinMain driveDrive power (100% DC) 20 kWDrive power (40% DC) 20 kWSpeed range - 12000 rpmSpindle taper HSK-A 63NC rotary table with pallet changerType of Measuring system Direct measuring systemTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 600 Kg4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 40 rpmDistance between T-Slots 100 mmNumber of Slots 5Slot width 14 mmSpindle taper HSK-A 63Spindle taper for HSK-A 63 to DIN 69893 (incl. adaptation working spindle, tool changer and tool magazine)Tool magazine, cha ...

GeneralHorizontal universal machining center; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal650 mmCross700 mmVertical950 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minCabineFull protection cabinMotor spindle 20,000 rpmMotor spindle speedMASTER® HSK-A 63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)Taper cleaning brushesTaper cleaning unit with rotating brushes for spindle taper HSKNC swivel rotary table DirectDriveNC swivel rotary table direct drive Table plate: d 650 mm / 25.6 in 1 x T-slot 14 H7 / 0.55 H7 (alignment groove, table centre) 8 x T-slot 14 H12 / 0.55 H7 (clamping grooves) Permissible load: 600 kg / 1,323 lbs Rotary-axis: 80 min-1 direct drive Swivel-aKinematics a ...

GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal700 mmCross700 mmVertical700 mmMiscellaneousClamping SystemHSK-A 63 CabineFull protection cabinMain driveDrive power (100% DC) 20 kWDrive power (40% DC) 20 kWSpeed range - 12000 rpmSpindle taper HSK-A 63NC rotary table with pallet changerType of Measuring system Direct measuring systemTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 600 Kg4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 40 rpmDistance between T-Slots 100 mmNumber of Slots 5Slot width 14 mmSpindle taper HSK-A 63Spindle taper for HSK-A 63 to DIN 69893 (incl. adaptation working spindle, tool changer and tool magazine)Tool magazine, cha ...

GeneralUniversal machining centre; Control: 3D Control Siemens 840D powerline Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal1250 mmCross1000 mmVertical1000 mmMiscellaneousClamping SystemHSK-A 100 Tool changerApplicationUniversal Type of magazineChain Tool changer planehorizontal Type of gripperDouble gripper Automatic swivel milling headUniversal head: automatic changeover from vertical to horizontal machiningProd. package 40 bar/23 l/minCoolant through spindle centre form AD 40 bar/23 l/min / 580 psi/6 gallon/min (theoretical pump performance) clear-view rotating window Multi-jet unit at universal head, switchable from coolant to air (max. 6 bar / 90 psi) (6 water jets, 4 air jets) pumpNC rotary table with pallet changerType of Measuring system Direct measuring system ...

GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal700 mmCross700 mmVertical700 mmMiscellaneousClamping SystemHSK-A 63 CabineFull protection cabinMain driveDrive power (100% DC) 20 kWDrive power (40% DC) 20 kWSpeed range - 12000 rpmSpindle taper HSK-A 63NC rotary table with pallet changerType of Measuring system Direct measuring systemTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 600 KgRotation speed max.4. Axis 40 rpmDistance between T-Slots 100 mmNumber of Slots 5Slot width 14 mm4. Axes (swivelling range) 360 x 0,001 degreeSpindle taper HSK-A 63Spindle taper for HSK-A 63 to DIN 69893 (incl. adaptation working spindle, tool changer and tool magazine)Tool magazine, cha ...

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 100 mm - B-axis ±110° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 5 bar; 20l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor - USB interface, Ethernet interface; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length750 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmC-Axis Speed-5000 rp ...

GeneralHorizontal Machining Centre; Control: 3D Control Siemens 840D solutionline Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal700 mmCross700 mmVertical700 mmMiscellaneousClamping SystemHSK-A 63 CabineFull protection cabinMain driveDrive power (100% DC) 20 kWDrive power (40% DC) 20 kWSpeed range - 12000 rpmSpindle taper HSK-A 63NC rotary table with pallet changerType of Measuring system Direct measuring systemTable surface 500 x 500 mmCentre bore 50 mmMaximum load (table centre) 600 KgRotation speed max.4. Axis 40 rpmDistance between T-Slots 100 mmNumber of Slots 5Slot width 14 mm4. Axes (swivelling range) 360 x 0,001 degreeSpindle taper HSK-A 63Spindle taper for HSK-A 63 to DIN 69893 (incl. adaptation working spindle, tool changer and tool magazine)Tool magazine, cha ...

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length1200 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-63A DIN 69893  ...

General2-Turret Shaft Lathe; Control: Control F32iB CharacteristicsMax machining diameter120 mmDimensions (L x W x H)1,65 x 1,67 x 1,5 mDrive power main spindle5,5/3,7/3,7 kWRapid feed X / Z20 / 30 m/minMovements X / Z60 / 580 mmLower Turret6 PositionsRapid feed X / Z20 / 30 m/minMovements X / Z60 / 580 mmUpper Turret6 PositionsSpeed max.-3500 rpmMax. Turning Length535 mmWeight approx.3000 KgTailstock spindle travel check (4 positions)Tailstock Spindle Travel Check (4 Positions) The tailstock spindle stroke range can be detected by connecting the tailstock spindle and air cylinder with scale function.Foot switch for tailstockFoot switch for tailstock The tailstock spindle is moved in and out with a foot switch.Coolant gunCoolant Gun The magnet type coolant gun is attached to the machine front. Pressing the coolant gun button on the operation panel activates the coolant pump, and depressi ...

Tool changerType of gripperDouble gripper Tool changer planevertical Number of tools90 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmWorking area 1Longitudinal735 mmCross650 mmVertical560 mmTechnical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minGeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Siemens 840D sl Operate Floor space/WeightWeight approx.12400 KgNC swivel rotary table integrated in rigid tableType of Measuring system Direct measuring systemTable surface 800 x 650 (Ø 650) mmRotation Speed 5. Axis 20 rpm5. Axes (swivelling range) +120/-120 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 40 rpmDistance between T-Slots 63 mmNumber of Slots 9Slot wi ...

General2-Turret Shaft Lathe; Control: Control F32iB CharacteristicsMax machining diameter120 mmDimensions (L x W x H)1,65 x 1,67 x 1,5 mDrive power main spindle5,5/3,7/3,7 kWRapid feed X / Z20 / 30 m/minMovements X / Z60 / 580 mmLower Turret6 PositionsRapid feed X / Z20 / 30 m/minMovements X / Z60 / 580 mmUpper Turret6 PositionsSpeed max.-3500 rpmMax. Turning Length535 mmWeight approx.3000 KgTailstock spindle travel check (4 positions)Tailstock Spindle Travel Check (4 Positions) The tailstock spindle stroke range can be detected by connecting the tailstock spindle and air cylinder with scale function.Foot switch for tailstockFoot switch for tailstock The tailstock spindle is moved in and out with a foot switch.Coolant gunCoolant Gun The magnet type coolant gun is attached to the machine front. Pressing the coolant gun button on the operation panel activates the coolant pump, and depressi ...

GeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmTool changerTool changer planevertical Type of gripperDouble gripper Number of tools60 Max. tool diameter with occupied adjacent pockets80 mmMax. tool length315 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.12600 KgNC swivel rotary table integrated in rigid tableType of Measuring system Direct measuring systemTable surface 800 x 650 (Ø 650) mmRotation Speed 5. Axis 20 rpm5. Axes (swivelling range) +120/-120 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 40 rpmDistance between T-Slots 63 mmNumber of Slots 9Slot width 1 ...

Steriflow 5 trolley retorts for sale. 1.3M diameter, front and rear door. Each retort will be supplied with two full sets of trolleys and trays along with the valves and pumps that were running with each machine so that you don’t have to buy anything extra. These are in beautiful condition having only been cooking rice in sealed plastic ready meal trays. We have some units with the older style panels and some have had the upgraded touchscreen so are more expensive. All are in the same nice condition regardless of control system.

GeneralUniversal Machining Centre in monoBLOCK construction - MPC Machine Protection Control; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal750 mmCross650 mmVertical560 mmTechnical DataDrive power (100% DC)25 kWDrive power (40% DC)35 kWTorque (100% DC)86 NmTorque (40% DC)130 NmSpeed range- 20000 rpmSpindle taperHSK-A 63 Feed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minTool changerType of gripperDouble gripper Tool changer planevertical Number of tools60 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmMiscellaneousClamping SystemHSK-A 63 Floor space/WeightWeight approx.12300 KgNC swivel rotary tableTable surface 800 x 650 (Ø 650) mmCentre bore 50h6 mmMaximum load (table centre) 600 KgSlot width 14 mmDirect mea ...

Other Info: Keyseating machine POLYMAT - STUHLMANN POL 50 Keyseating machine 3 - 50 x 400 mm MACH - ID 6374 Make: POLYMAT Type: STUHLMANN POL 50 YOP: 1975 Table Ø   675 x 550 mm Ram adjustment    400 mm Stroke    0 - 400 mm Power    5.5 kW Groove width 3 – 50 mm Drawing length 400 mm Working speed strokes / min Cutting speed 0 – 20 m / min Return speed 40 m / min Length    1.100 mm Width     1.250 mm Height    1.400 mm Weight    1.600 kg

Turning diameter: 170 mm Turning length: 0 mm Turret positions: 12 CNC Brand: Fanuc CNC Model: 21 i-T MACH - ID 6098 Make:COLCHESTER Type:TORNADO A50 Control:Fanuc 21 i-T YOP:2000 Max. turning Ø 170 mm X-Axis       350 mm Z-Axis       210 mm Spindle bore     54 mm Speedrange         6000 Rpm Spindle power       5,5 kW ATC / revolver         12 x Vdi 30 Control       Fanuc 21 i-T Chip conveyor         Yes Large tooling package VDi 30 Bar feeder L = 1000 mm Dimensions Length      6.000 mm Width        2.100 mm Height       1.900 mm Weight       2.800 kg

Generalin travelling column construction NEW DMG MORI Design swivel head (B-axis) speed range 20 up to 10,000 rpm motor spindle with 52/42 kW (40/100%DC) tool taper HSK-A100 DIN 69893 tool clamping according to DIN 69872; Control: CELOS with Siemens 840D sl Operate Working area 1Cross1100 mmLongitudinal2600 mmVertical900 mmTechnical DataFeed rate longitudinal/transverse/vertical80000/80000/80000 mm/minRapid traverse longitudinal/transverse/vertical80/80/80 m/minTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight12 KgMax. tool length500 mmMax. tool diameter with occupied adjacent pockets115 mmMax. tool dia. with free neighbouring pockets160 mmDirect measuring systemDirect path measuring systemCabineFull protection cabinDynamic package for DMF 260 linear (Y1100)Dynamic package for DMF 260 linear (Y1,100 mm) linear drive X-axis with 80 m/min // ...

GeneralTravelling column machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal3000 mmCross1100 mmVertical1050 mmFeed drives:Feed rate X / Y / Z42000/42000/42000 mm/minRapid feed X / Y / Z42/42/42 m/minNC-swivel head (B-axis)Controlled NC-swivel milling head (B-axis) with clamping in position. Continuously positioning NC swivel milling head with integrated motor spindle for 4/5 axes positioning and simultaneous machining. Swivel torque: 3,300 / 2,300 Nm // 2,433 / 1,696 ftCabineFull protection cabinSpindle speed 15,000 rpm, 200NmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle)Rigid table with integrated rotary axis (leftside)Rigid table with integrated round table Ø 1050 mm // 41.3 in located left side of table table load max. 1,200 kg  ...

Line date: 2018 new, original packed Product description: Plastic Jar, 35 jars (bottles) / Minute (per line) Packaging description: RSC Cases (regular slotted case) , tape sealed System description: ARPAC ARPAC developed an integrated solution for this end line packaging system. Product is received single lane, diameter-to-diameter, into an automatic cartoning machine. Cartons are pushed into the required case pack configuration by a pneumatic row pusher. Product is collated, packed into a case, and manually palletized. Labellers: Jars (bottles) arrive filled, sealed, and are already labelled One Jars are placed inside a carton, the flaps are sealed with glue and a printed label with date/lot code is applied. Once cartons are placed in case, the flaps are sealed with tape and a printed label with date/lot code is applied. Features: - (3) Print and Apply Bar Co ...