british flag
Resale Logo

rubber injection presses used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information engines and gears  Motoren Steffens GmbH  http://www.motoren-steffens.de 
banner logo
start page > keywords rubber injection presses > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
121669751 802

MILLER TP29S for sale


Printing machine - Two Colour - perfecting Miller Model TP29S Year 1984 Impressions 95 million Sheetsize 210 x 280 - 520 x 740 mm Dampening Molleton with circulation pump Speed up to 13.000 sheets p/h Perfecting  ...
used machine
 
Printing machine - Two Colour - perfecting
Miller
Model TP29S
Year 1984
Impressions 95 million
Sheetsize 210 x 280 - 520 x 740 mm
Dampening Molleton with circulation pump
Speed up to 13.000 sheets p/h
Perfecting 2/0 - 1/1
Details IR-Dryer Jac. De Vries R-11 installed in 1998
Super blue
Sheet decurler
2 Active antistatic bars in the feeder
Optical & mechanical double sheet control
Spiess S-11 Stream feeder
Grafix Exactomat Powder sprayer
Air Compressors have been replaced in 1998
High Pile delivery
Available on request only, maybe after 3-4-5-6 month
1984
Price  
  NL   request
121669360 206

KALLESOE A/S K 20 / E for sale
Carcass clamps


Automatic corpus press KALLESOE A / S type K20 / E year 1998 Engine No. No. 33938 / 98 This special designed body press K20E is made for the production of cabinets. The special body press spans together a whole ward ...
used machine
 
Automatic corpus press KALLESOE A / S type K20 / E year 1998
Engine No. No. 33938 / 98

This special designed body press K20E is made for the production of cabinets.
The special body press spans together a whole wardrobe in a single operation, including shelves, sides and rear paneling.
The parts of the Cabinet are held by fixtures and vacuum heads before the Cabinet is compressed.
The range is set 4 ball screws which compress even the Cabinet.
A servo motor ensures that each clamping clamping pressure is equal.
The machine is controlled via a touch panel: the corpus press is set automatically on the basis of entered dimensions and values on the correct measure and the correct clamping pressure.
The here shown special body press is ready for shipment
the finished cabinets equipped with an underlying belt railway with roles.

Technical data
Clamping width min./max.: 190/1200 mm
Clamping height Min/Max: 200/1200 mm
Clamping depth min./max.: 200/400 mm
Working height: 500/1000 mm

Specifications subject to

Automatic case press KALLESOE A / S type K20 / E year of manufacture 1998
Machine no. No. 33938 / 98

This specialized case press K20E is designed for the production of cabinets.
The special corpus press clamps on entire cabinet together in a single operation, including shelves, sides and rear panelling.
The parts of the cabinet are held in place by holding devices and vacuum heads, before the cabinet is compressed.
The edge width is adjusted via 4 ball screws, that so compress the cabinet.
A servo motor ensures that the edge pressure is the same for every clamping operation.
The machine is controlled via a touch panel: the body press is automatically switched on and off by means of a touch panel.
of the entered dimension and values are set to the correct dimension and clamping pressure.
The case press special shown here is designed for further transport.
of the finished cabinets are equipped with a belt conveyor with rollers behind it.

Technical specifications
Clamping width min. / max.: 190/1200 mm
Clamping height min. / max.: 200/1200 mm
Clamping depth min. / max.: 200/400 mm
Working height: 500/1000 mm

Technical data subject to change
1998
Price  
    request
121669344 802

RYOBI 522 HX for sale


-Two colours max paper size 37x52 cms. straight machine -Year 1997, Only 15 mil. impressions -Ryobimatic dampening, Quick clamps -AAC Automatic Aqua Control with cooling unit, Automatic registers -Plate punch, all ac ...
used machine
 
-Two colours max paper size 37x52 cms. straight machine
-Year 1997, Only 15 mil. impressions
-Ryobimatic dampening, Quick clamps
-AAC Automatic Aqua Control with cooling unit, Automatic registers
-Plate punch, all accessories, in production now
1997
12,000 €  
  IT   request
121653303 801

SAKURAI Oliver 72 E 2 for sale


-Single colour size 52x72 cms. -Olivermatic alcool dampening with Chiller -Year 1996, 50 mil. copies -Quick clamps, all accessories, in production now
used machine
 
-Single colour size 52x72 cms.
-Olivermatic alcool dampening with Chiller
-Year 1996, 50 mil. copies
-Quick clamps, all accessories, in production now
1996
7,000 €  
  IT   request
121653301 805

KBA Rapida 72-5 for sale


-Five colours straight machine max size 52x72 cms. -Year 1996, 48 mil. impressions -KBA Colortronic table control with ink and plate registers -Alcool dampening with chiller -Automatic Plate loading -High pile deliv ...
used machine
 
-Five colours straight machine max size 52x72 cms.
-Year 1996, 48 mil. impressions
-KBA Colortronic table control with ink and plate registers
-Alcool dampening with chiller
-Automatic Plate loading
-High pile delivery
-IR dryer, Manual preset of the paper, Oxydry powder spray
-Automatic blanket washers
-Rebuilt few months ago, in production, complete with all accessories
1996
76,000 €  
  IT   request
121653244 301

FANUC S2000i100B for sale


FANUC electric 100 ton machines. -Model : S2000i100B -Clamping force : 100 ton -Manufactured year : 2007, 2008, 2009 each 1 unit
used machine
 
FANUC electric 100 ton machines.
-Model : S2000i100B
-Clamping force : 100 ton
-Manufactured year : 2007, 2008, 2009 each 1 unit
2009
Price  
  KR   request
121653243 301

ENGEL VC330/150 TECH PRO for sale


ENGEL VC330/120 TECH PRO -Clamping force : 120 ton -Screw diameter : 30mm -Manufactured year 2009
used machine
 
ENGEL VC330/120 TECH PRO
-Clamping force : 120 ton
-Screw diameter : 30mm
-Manufactured year 2009
2009
Price  
  KR   request
121653242 301

ENGEL VC200/50 TECH PRO for sale


ENGEL VC200/50 TECH PRO -Clamping force : 50 ton -Screw diameter : 25mm -Manufactured year 2007
used machine
 
ENGEL VC200/50 TECH PRO
-Clamping force : 50 ton
-Screw diameter : 25mm
-Manufactured year 2007
2007
Price  
  KR   request
121653241 301

KRAUSS MAFFEI KM280/1300 C2 for sale
Injection molding machines


Krauss Maffei KM280/1300 C2 -Clamping force : 280 ton -Screw diameter : 60mm -Manufactured year : 2007 -Quantity : 2
used machine
 
Krauss Maffei KM280/1300 C2
-Clamping force : 280 ton
-Screw diameter : 60mm
-Manufactured year : 2007
-Quantity : 2
2007
Price  
  KR   request
121653240 301

KRAUSS MAFFEI KM2300/17200/12000 MX for sale
Multi component injection moulding machines


Krauss Maffei bi-material KM2300/17200/12000 MX -Clamping force : 2300 ton -Manufactured year : 2008~2009 -Quantity : 6 units
used machine
 
Krauss Maffei bi-material KM2300/17200/12000 MX
-Clamping force : 2300 ton
-Manufactured year : 2008~2009
-Quantity : 6 units
2009
Price  
  KR   request
121653239 301

KRAUSS MAFFEI KM1600/12000/8100 MX for sale
Multi component injection moulding machines


Krauss Maffei bi-material KM1600/12000/8100 MX -Clamping force : 1300 ton -Manufactured year : 2007~2009 -Quantity : 12 units
used machine
 
Krauss Maffei bi-material KM1600/12000/8100 MX
-Clamping force : 1300 ton
-Manufactured year : 2007~2009
-Quantity : 12 units
2009
Price  
  KR   request
121653238 301

KRAUSS MAFFEI KM1300/8100/6100 MX for sale
Multi component injection moulding machines


Krauss Maffei bi-material KM1300/8100/6100 MX -Clamping force : 1300 ton -Manufactured year : 2007~2009 -Quantity : 9 units
used machine
 
Krauss Maffei bi-material KM1300/8100/6100 MX
-Clamping force : 1300 ton
-Manufactured year : 2007~2009
-Quantity : 9 units
2009
Price  
  KR   request
121632754 817  

GALLUS T 180 B for sale


Reel feeding 4 colours plus U.V. Lack in all units Trimmer at delivery Serial number: 081092

 
Reel feeding

4 colours plus U.V. Lack in all units

Trimmer at delivery

Serial number: 081092
 
Price  
  PT   request
121632752 805  

KBA RA 162-5 for sale


Maximum Size: 1200 x 1620 mm Full automatic plate change system FAPC VARIDAMP dampening Ink, Dampening and register control COLORTRONIC All automatic washers INTERCOM Refrigeration BALDWIN Powder spr ...
used machine
 
Maximum Size: 1200 x 1620 mm

Full automatic plate change system FAPC

VARIDAMP dampening

Ink, Dampening and register control COLORTRONIC

All automatic washers

INTERCOM

Refrigeration BALDWIN

Powder spray WEKO

Impression count: 149 millions
2003
Price  
  PT   request
121632737 203

WEINIG HYDROMAT H23C for sale
Four-sided planing machines


-machine in stock -After reviewing the technical -very good condition -year of manufacture 2001 TECHNICAL PARAMETERS: PLANER: -planing width 230 mm -planing height 180 mm -spindle diameter 50 mm -the maxim ...

 
-machine in stock
-After reviewing the technical
-very good condition
-year of manufacture 2001

TECHNICAL PARAMETERS:

PLANER:
-planing width 230 mm
-planing height 180 mm
-spindle diameter 50 mm

-the maximum diameter 220 mm

-the feed rate to 80 m/min
-adjustable feed on the inverter

1) head the lower 15 kW
2) head right 11 kW
3) head left 11 kW
4) upper head 11 kW
5) upper head 18 kW
4) lower head 22 kW

-electrically height-adjustable
-electrically adjustable upper heads
-pneumatic clamps

-cardan shafts feed
-five top steel roller
-the two upper rollers, rubber
-four rolls in the worktop extending

-auxiliary pressure on the left of the head
-the last two heads on podtrzymkach
-nozzle diameter 140 mm

SYSTEM ADMINISTRATION:
-packet length 6100 mm
-width: 1200 mm
-height 1300 mm
-the possibility of stacking two packages at the same time
-for
-the brackets to the narrow items
-chain feeder 2500 mm
-initial material segregation
-Cross-feeder Planer 1500 mm
-hydraulic Accelerator

SYSTEM:
-conveyor 7000 mm
-the receiving table transverse conveyor 2100 mm
-receiving rollers-powered 6000 mm
-receiving roller and adjustable flame launchers, 7100 mm
-gravity rollers receivers

Automatic line strugaj?ca Weinig is a system for improving productivity, while increasing its efficiency. Solutions of this type are directed to the companies that make the process of automation of production facilities. Planing process elements is operated by two persons who are responsible for the initial choice of material and the reception. The principle of operation of the line shall be as follows, the material is delivered with a forklift on the chain conveyor, which thanks to its long sleeps two packages at the same time. This affects directly the effectiveness as it unfolded one of the operator can immediately place again at the right place, without downtime caused by not delivering material by fork-lift truck. Rozsztalowania system tilts the entire package and raises it at the same time, releasing the single guides layers that directly hit the chain feeder. The individual elements at this stage pass prequalification for those suitable for planing and waste. Material not suitable for further processing is separated by an operator who has a position at this stage, who, through the button adjusts the rollers stop line continuity by what material falls under the tray and does not goes to the Planer. Material that has passed segregation and is suitable for further stage goes through gravity rollers for another chain feeder. At the end of the feeder is equipped with a system of rollers and hydraulic Accelerator, which is responsible for moving items from the tray to the Planer Weinig Hydromat H23C. Planing process then takes place elements that has the possibility of processing them at speeds up to 80 m/min. Integrated system of elements after the planing them tape feeder table transverse equipped with automatic system dump the material. At this stage, ready to cross conveyors transporting it over the core. Material when you hit the Skate moved
is them to ejectors which expel material on gravity rollers where they are received by the employee. The line is the ideal solution for companies who appreciate the quality and the efficiency of the elements. Planer is able to meet even the most demanding expectations, while the system input and output only to increase its performance.
 
Price  
  PL   request
121632726 301

ARBURG 270V 500-150 for sale
Injection molding machines


OVERVIEW: Brand: Arburg Model: 270V 500-150 Application type: Injection moulding Machine type: Injection Moulding Machine Availability: Immediately Construction year: 1997 Production hours: 106863 Location: Germa ...
used machine
 
OVERVIEW:
Brand: Arburg
Model: 270V 500-150
Application type: Injection moulding
Machine type: Injection Moulding Machine
Availability: Immediately
Construction year: 1997
Production hours: 106863
Location: Germany
Origin country: Germany

GENERAL DATA:
Measurements width: 3615 mm
Measurements depth: 2085 mm
Measurements height: 1990 mm
Machine weight: 2250 kg
Automatic cycles: 13520148
Type of drive: Hydraulic
Closure: Hydraulic

CONTROL UNIT:
Brand: Arburg

INJECTION UNIT:
Heating capacity: 4 x 1.2 kW
Adjustable heating zones: 4
Nozzle pressure: 60 kN

CLAMPING UNIT:
Clamping force: 500 kN
Opening stroke: 350 mm
Max. open daylight: 550 mm
Distance between bars (h x v): 320 mm
Size of mold platens: 405 mm
Ejector stroke: 125 mm
Ejector force for / back: 30 kN

MEDIA:
Main electronic connection: 400 V / 50 Hz / 3 P
Power consumption: 24.7 kVA
Oil tank: 160 L
1997
Price  
  DE   request
121632723 301

ARBURG 270S 500-150 for sale
Injection molding machines


OVERVIEW: Brand: Arburg Model: 270S 500-150 Application type: Injection moulding Machine type: Injection Moulding Machine Availability: Immediately Construction year: 2000 Production hours: 79620 Location: German ...
used machine
 
OVERVIEW:
Brand: Arburg
Model: 270S 500-150
Application type: Injection moulding
Machine type: Injection Moulding Machine
Availability: Immediately
Construction year: 2000
Production hours: 79620
Location: Germany
Origin country: Germany

GENERAL DATA:
Measurements width: 3125 mm
Measurements depth: 1115 mm
Measurements height: 1850 mm
Machine weight: 2250 kg
Automatic cycles: 13086699
Type of drive: Hydraulic
Closure: Hydraulic

CONTROL UNIT:
Brand: Arburg

INJECTION UNIT:
Heating capacity: 4 x 2.1 kW
Adjustable heating zones: 4
Nozzle pressure: 70 kN

CLAMPING UNIT:
Clamping force: 500 kN
Opening stroke: 350 mm
Max. open daylight: 575 mm
Distance between bars (h x v): 320 mm
Size of mold platens: 472 mm
Ejector stroke: 125 mm
Ejector force for / back: 30 kN

MEDIA:
Main electronic connection: 400 V / 50 Hz / 3 P
Power consumption: 22 kVA
Oil tank: 160 L
2000
Price  
  DE   request
121632703 301

DEMAG 25/280 - 80 for sale
Injection molding machines


Maschinenspezifikation Year: 2005 Injection Unit: .../280 Screw diameter: 18 mm Injection pressure: 2868 bar Injection volume: 23 ccm Shot capacity: 20 g Clamping Unit: 25/... Clamping force: 25 t  ...

 
Maschinenspezifikation

Year: 2005

Injection Unit: .../280
Screw diameter: 18 mm
Injection pressure: 2868 bar
Injection volume: 23 ccm
Shot capacity: 20 g

Clamping Unit: 25/...
Clamping force: 25 t
Platen size: 460 x 450 mm
Distance between tie bars: 280 x 280 mm
Mould height: 160... mm
Opening storke: 315 mm
Max.Daylight: 475 mm
Ejector stroke: 100 mm
Drive power of the hydraulic pump: 11 kW
Cylinder heating power: 5 kW

General information:
Delivery time: Now
Machine dimensions(m) LxWxH: 3,4 x 1,2 x 2,0 m
Weight: 2530 kg
 
Price  
    request
121632701 301

BATTENFELD PLUS 350/75 for sale
Injection molding machines


Machine specification Year: 2008 Control unit: Unilog B2 Injection Unit: .../75 Screw diameter: 22 mm Injection pressure: 2034 bar Injection volume: 38 ccm Shot capacity: 34,5 g Clamping Unit: 350/.. ...
used machine
 
Machine specification

Year: 2008
Control unit: Unilog B2

Injection Unit: .../75
Screw diameter: 22 mm
Injection pressure: 2034 bar
Injection volume: 38 ccm
Shot capacity: 34,5 g

Clamping Unit: 350/...
Clamping force: 35 t
Platen size: 470 x 280 mm
Distance between tie bars: 270 mm
Mould height: 150...250 mm
Opening storke: 200 mm
Max.Daylight: 450 mm
Ejector stroke: 100 mm
General information:
Delivery time: Now
Weight: 1.000 kg

Equipment:
- Top condition, laboratory machine
- approximately 3.000 working hours
?- 1 x Pneumatic valve
- Bimetallic Barrel
2008
Price  
    request
121632696 815

KODAK Photo Printer 6850 for sale


Print method: Thermal transfer maximum resolution: 300 x 300 dpi minimum memory (RAM): 128 MB min hard drive space: 2000 MB interface: USB 2.0 standard
used machine
 
Print method: Thermal transfer maximum resolution: 300 x 300 dpi minimum memory (RAM): 128 MB min hard drive space: 2000 MB interface: USB 2.0 standard
 
Price  
    request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Find used machinery dealers in your country