british flag
Resale Logo

rs 211 used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information used machine tools  INTER-PLAST Andrzej Bodziachowski  http://www.inter-plast.com.pl 
banner logo
start page > keywords rs 211 > results
184 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10
125436757 106

SMERAL LENP 40 A for sale
Eccentric Presses


Eccentric press SMERAL LENP 40 A was produced by the machine manufacturer SMERAL. The SMERAL LENP 40 A machine was built in 1977. Technical parameters of the SMERAL LENP 40 A press: - maximum pressure force: 40 t -  ...
used machine
 
Eccentric press SMERAL LENP 40 A was produced by the machine manufacturer SMERAL. The SMERAL LENP 40 A machine was built in 1977.

Technical parameters of the SMERAL LENP 40 A press:
- maximum pressure force: 40 t
- overhang: 220 mm
- stroke adjustment range: 8-90 mm
- range of adjustment of the slider: 60 mm
- distance between the slider and the table at the maximum stroke, in the lower turning point with the connector removed: 250 mm
- passage between the walls of the body: 250 mm
- lower table: 630 x 430 mm
- mounting hole in the slider - diameter / height: 40/75 mm
- maximum number of jumps per minute (continuous operation): 67 1 / min
- number of possible jumps - the largest number of single jumps: 60 1 / min
- minimum stroke length of the slider: 8 mm
- maximum stroke length of the slider: 90 mm
- graduation of mounting grooves: 280 mm
- dimensions of fixing grooves in the table: 22 x 38 x 16 x 27 mm
- dimensions of fixing grooves in the table top: 22 x 37 x 16 x 27 mm
- diameter of the fixing holes / spacing of the fixing holes: 24/200/580 degrees
- body inclination: 28 degrees
- thickness of the mounting plate: 60 mm
- through hole in the mounting plate: 200/220 mm
- through hole in the mounting plate insert / offset height: 100/20 mm
- main engine power: 3 kW (1420 rpm)
- air consumption for one switch on: 4 l
- basic power supply: 3 x 380 / 220V, 50/60 Hz
- machine dimensions (length x width x height): 1080 x 1530 x 2110 mm
- machine weight: 2480 kg

SMERAL LENP 40A eccentric press equipment:
- intermediate table
- foot control
- a set of covers
- DTR (technical and operational documentation)
1977
3,875 €  
  PL   request
125498904 1010

VOLVO L110E Radlader for sale
Wheel loaders


; Power [PS]: 211; Accessories: Bereifung (v):23.5R25, Bereifung (h):23.5R25, Kabine
used machine
 
; Power [PS]: 211; Accessories: Bereifung (v):23.5R25, Bereifung (h):23.5R25, Kabine
2003
29,000 €  
  AT   request
125355397 835

FORM CONSULTA Stapel Collator for sale


Year approx 1992 7/8 stations MULTIFLEX stitch Crimp block stitch Constructively endlessly
used machine
 
Year approx 1992
7/8 stations
MULTIFLEX stitch
Crimp block stitch
Constructively endlessly
1992
Price  
    request
125497110 1010

GENIE S125 Diesel, 4x4x4 Drive, Jib, 40.1m Working Heigh for sale
Telescopic handlers


; Gross weight [kg]: 21006; Rear tyres remaining: 40; Front tyres remaining: 40; Accessories: Manufacturer: Genie, Typ: S125/4WD, Building year: 2008, Fuel: Diesel, Serial number: S12508-2211, Working hours: 1.403 h, Loa ...
used machine
 
; Gross weight [kg]: 21006; Rear tyres remaining: 40; Front tyres remaining: 40; Accessories: Manufacturer: Genie, Typ: S125/4WD, Building year: 2008, Fuel: Diesel, Serial number: S12508-2211, Working hours: 1.403 h, Loading / lifting capacity: 230 kg, Working height: 40.1 m, Horizontal reach: 24.4 m, Boom sections: 4, Drive speed: 4.8 km/H, Numbe; Maximum lift capacity [kg]: 230
2008
67,500 €  
  NL   request
125355390 832

MB BAEUERLE multimaster CAS52 for sale


FSA52/4 1st Folding Unit 4 pockets version A 2. Folding Unit 4 pockets version B Band display SetMatic Front blower 75 million folds Rill-, pouncing, cutting unit
used machine
 
FSA52/4
1st Folding Unit 4 pockets version A
2. Folding Unit 4 pockets version B
Band display
SetMatic
Front blower
75 million folds
Rill-, pouncing, cutting unit
2000
Price  
    request
125494056 1403

DEXION for sale
Lot of Shelf Racks


Weight approx.: 1500 kgDimensions (l x w x h) approx.: 14000 x 1300 x 2850 mmDescription: Approx. 28 rm, consisting of 16 uprights, height 2550 - 2850 mm, rack depth approx. 600 mm, 60 traverses length 2700 mm, without c ...

 
Weight approx.: 1500 kg
Dimensions (l x w x h) approx.: 14000 x 1300 x 2850 mm
Description: Approx. 28 rm, consisting of 16 uprights, height 2550 - 2850 mm, rack depth approx. 600 mm, 60 traverses length 2700 mm, without contents
 
Price  
  DE   request
125355303 702

Withdrawal carts


It is an used stainless steel cars with 10 x puller for sale. Vehicle dimensions: Length: 211cm, width: 65cm, height: 186cm Mass puller: total length: 200cm, stripping length: 165 cm, width: 58 cm For questions reg ...
used machine
 
It is an used stainless steel cars with 10 x puller for sale.
Vehicle dimensions: Length: 211cm, width: 65cm, height: 186cm
Mass puller: total length: 200cm, stripping length: 165 cm, width: 58 cm

For questions regarding delivery, commissioning, trade-in or lease offer we are gladly available.

Price on request.
 
Price  
    request
125475278 1900

OTTIGER for sale
Plastic Container on Wheels


Weight approx.: 40 kgDimensions (l x w x h) approx.: 600 x 900 x 1300 mmDescription: With brakes and swivel device for plastic containers, internal dimensions 520 x 720 x 1020 mm, additional liquid opening, in mint condi ...

 
Weight approx.: 40 kg
Dimensions (l x w x h) approx.: 600 x 900 x 1300 mm
Description: With brakes and swivel device for plastic containers, internal dimensions 520 x 720 x 1020 mm, additional liquid opening, in mint condition
 
used machinery auction RESALE 50 €  
  CH   request
125355087 107

HACO PPB 30135 for sale
Bending Tools


Press brake Manufacturer: Haco Type: PPB 30135 Year of construction: 1990 Operating instructions and documentation are available. more data, please refer to the attached data sheet. Contact person Mr. Muel ...
used machine
 
Press brake

Manufacturer: Haco
Type: PPB 30135
Year of construction: 1990

Operating instructions and documentation are available.

more data, please refer to the attached data sheet.

Contact person Mr. Mueller see also our over 200 more deals at.

(Changes and errors in the technical data, information
and prices and subject to prior sale!)
1990
Price  
    request
125447273 103

SHW UF 1 for sale
Universal Milling Machine


x-travel: 550 mmy-travel: 350 mmz-travel: 420 mmturning speeds: 46-2110 U/minspindle taper ISO: 40 boring spindle: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThis ad was cr ...
used machine
 
x-travel: 550 mm
y-travel: 350 mm
z-travel: 420 mm
turning speeds: 46-2110 U/min
spindle taper ISO: 40
boring spindle:
total power requirement: kW
weight of the machine ca.: t
dimensions of the machine ca.: m



This ad was created with MODUL MWS - the software solution of LogoTech.
1983
Price  
    request
125272657 103

DECKEL FP1 AKTIV DIGITAL for sale
Universal Tool-Milling Machines


DECKEL FP1 Active Nr 2102-2139, year of manufacture: 1982: -3 axis digital read out HEIDENHAIN TNC 113, résolution 0.005 mm, -Manual strokes X : 300 ; Y : 160 ; Z : 340 [mm], -Automatic strokes X : 290 ; Y : 160 ;  ...
used machine
 
DECKEL FP1 Active Nr 2102-2139, year of manufacture: 1982:

-3 axis digital read out HEIDENHAIN TNC 113, résolution 0.005 mm,
-Manual strokes X : 300 ; Y : 160 ; Z : 340 [mm],
-Automatic strokes X : 290 ; Y : 160 ; Z : 330 [mm],
-Sensitive drilling head type 2171 - stroke 100 [mm] - spindle ISO 40 - orientable -90° / 0° / +90°,
-Horizontal spindle ISO 40,
-Tilting swiveling table type 2114,
-Horizontal table dimensions : 600 x 255 [mm], 5 T slots 12 [mm]
-Vertical table dimensions : 605 x 195 [mm], 2 T slots 12 [mm],
-16 different spindle speeds from 40 to 2000 [tr/min],
-Variable power feeding from 5 to 500 [mm/min] in all 3 axis,
-Rapid feeding in all 3 axis - 1200 [mm/min],
-« Active » function controled by the HEIDENHAIN TNC 113 DRO in all 3 axis,
Bcblv9kxbw
-Coolant pump + LOC LINE coolant hose,
-Centralised automatic lubrication,
-Spindle electro-brake,
-Electrical cabinet seperated from the machine,
-Main motor power 2.0 kW,
-Dimensions : Width 1200 ; depth 1100 ; height 1700 [mm],
-Weight : 695 Kg approx.

Original DECKEL operators manual, service manual and electric plans included.



Machine in very good condition, visible under power.

Loading included, shipping possible Worldwide.

Price VAT Excl. on request.

SARL Kraffter
Lieu dit Le Sourd
73520 Saint Béron, FRANCE
Tel: +33(0)6-73-30-03-87
VAT N°: FR 17 819 707 167
1982
Price  
  FR   request
125447275 103

SHW UF 2 for sale
Universal Milling Machine


x-travel: 1120 mmy-travel: 300 mmz-travel: 540 mmturning speeds: 46-2110 U/minspindle taper ISO: 40 boring spindle: slotting head: digital readout: Acurite total power requirement: kWweight of the machine ca.: 3,5 tdi ...
used machine
 
x-travel: 1120 mm
y-travel: 300 mm
z-travel: 540 mm
turning speeds: 46-2110 U/min
spindle taper ISO: 40
boring spindle:
slotting head:
digital readout: Acurite
total power requirement: kW
weight of the machine ca.: 3,5 t
dimensions of the machine ca.: 2,1x1,8x1,8 m



This ad was created with MODUL MWS - the software solution of LogoTech.
1970
Price  
    request
125050283 1101

SSANGYONG SULZER 6S20 for sale
Diesel generators


DEAR'S SALE, COMPLETE GENERATOR LOW WORKING & CONDITION F/O burning BUILT 1992 775 kva 380v 50Hz 750 rpm Brgds Hakan KUSCU +905323642509 info@kscege

Quantity: 2
 
DEAR'S

SALE, COMPLETE GENERATOR LOW WORKING & CONDITION
F/O burning
BUILT 1992
775 kva 380v 50Hz 750 rpm

Brgds
Hakan KUSCU
+905323642509
info@kscege
 
Price  
  TR   request
125443198 101

SELICA Brand Smart-60Y for sale
Selica Brand Smart-60Y - CNC universal lathe


2016
30,000 EU?  
  PL   request
125047965 706

SIMONAZZI/SASIB SANS 60.000 cph 211/202 for sale
Can filling plants


Can filling line capacity: 60000 cph can type: 211 202 (0.33 and 0, 5ltr.) consisting of: 1 can depalletizer Meypack DL40 year of manufacturing: 1991 with Siemens S5 control 2.complete can conveyor system 3.  ...
used machine
 
Can filling line capacity: 60000 cph
can type: 211 202 (0.33 and 0, 5ltr.)
consisting of:

1 can depalletizer Meypack DL40 year of manufacturing: 1991
with Siemens S5 control

2.complete can conveyor system

3. rinser TRANS Hyssek CanJet
year of manufacturing: 1997
adjustable mechanically to 0,5 and 0,33 ltr.

4 filler Samonazzi / SASIB beverages Sacrans 2000
1996 year of manufacturing
with 104 filling valves
blocked with:
Ferrum seamer type: F812
year of manufacturing 2000

5.filling height control Krones
year of manufacturing: 1998
with X-ray

6 c turner TRANS Hyssek

7 Pasteurizer Sander Hansenyear of manufacturing: 1998
Double deck
control upgrade by KHS with visualization to Siemens S7

8 dating 2 x Videojet

9 packaging machine Kisters
year of manufacturing: 1991
production: 18 and 24 Anubhav on a tray with shrinking with 45
mü foil
Nordson glue system
with Siemens S7 control

10 package transport

11.palletizer Kettner inlet above
year of manufacturing: 1996

12 pallet transport incl. magazine

13 Winder Haloila

Price as is / ex-location

This offer is subject to prior sale.
Terms of delivery: EXW, unpacked
Terms of PAYMENT.50% with order; 50% on delivery
Time of delivery: as per agreement.

Still installed and producing at 60.000 cph
#
 
Price  
    request
125443053 203

HOLZMA HPP 81-3200 for sale
Holzma HPP 81-3200 panel saw


Machine has been in operation for 6 years in the present owner carpentery and has no problems with it. Very good condition, simple service.
used machine
 
Machine has been in operation for 6 years in the present owner carpentery and has no problems with it. Very good condition, simple service.
1991
4,225 EU?  
  PL   request
124929779 401

Ortmann&Herbst, Kettn 0.25, 0.33, 0.5 ltr cans for sale
Can Filling Line 30.000 cph for CSD


Can Filling Line 30.000 cph for CSD This complete can filling line was installed in 1994 and it was filling various carbonated soft drinks in 0.25, 0.33 and 0.5 ltr aluminium cans with type 202 and 211 lids. The l ...
used machine
 
Can Filling Line 30.000 cph for CSD

This complete can filling line was installed in 1994 and it was filling various carbonated soft drinks in 0.25, 0.33 and 0.5 ltr aluminium cans with type 202 and 211 lids. The line was in operation till 2015 and it was well maintaned and some equipment like seamer was refurbished completely. In the end of 2017 equipment was professionally dismantled and is now in a warehouse.

Main characteristics of this line

Manufacturers Ortmann & Herbst/CFT, Kettner, SMI, HEUFT
Year of manuf. 1994, 1995 and 2006
Capacity 30.000 cph at 330/250 ml and 19.000 cph at 500ml cans
Suitable for CSD and beer
Can lid type 211 and 202 (Diam 66 mm)
Filler Mechanical filling system
Consumer packs 4x6, 4x3, 2x3 shrink film
Pallet Max height 3.0 m, max width 1.42 m
PLC controls Siemens Simatic S5 and S7

Detailed list of equipment available for serious requests
1994
Price  
  FI   request
125443057 709

SEALPAC SP 350 for sale
Packaging machine SEALPAC SP 350


Sealpac SP 350 is a machine for packaging in a modified atmosphere of fresh and frozen foods such as meat, sausages, fish, vegetables, fruits, ready meals, etc. The machine is intended for small and medium food producers ...
used machine
 
Sealpac SP 350 is a machine for packaging in a modified atmosphere of fresh and frozen foods such as meat, sausages, fish, vegetables, fruits, ready meals, etc. The machine is intended for small and medium food producers.
2009
36,750 EU?  
  PL   request
124746332 1102

DEUTZ BF6M1015 for sale
Diesel engines


Well-functioning used Deutz engine (diesel) type BF6M1015 211 kW at 1800 rpm We have a large selection of new and used engines. Please contact us regarding pricing and availability.
used machine
 
Well-functioning used Deutz engine (diesel) type BF6M1015

211 kW at 1800 rpm

We have a large selection of new and used engines.
Please contact us regarding pricing and availability.
 
Price  
    request
125360853 706

STORK-PACHO PLH1E60A for sale
Carton sealer


Kartonverschliesser / Verkleber ID5211
used machine
 
Kartonverschliesser / Verkleber
ID5211
1985
Price  
  DE   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More RS models (2 or more machines):
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

Gluing machines OSAMA S4R/P 1800


Code: 0364 Brand: OSAMA Model: S4R/P 1800 - CE Standard 4 Rollers automatic gluing machine with 2 motors with automatic washer suitable for veneer, laminated, multilayer, doors - CE Standard - Year 2002 Working width mm 1800 Working height mm 0-100 Work surface height mm 890 Spreading roller diameter mm 250 Feed speed mt/min 22 Motor power Kw 3 Overall dimensions: mm 2600 x 1100 x 1500 h Weight kg 1000

SEMI-AUTOMATIC HYDRAULIC SCREENCHANGER MADE IN ITALY mm.300


SEMI-AUTOMATIC HYDRAULIC SCREENCHANGER for extruders 130 to 160 mm diam. sliding plate made in special steel alloy hydraulic piston movement 3 heating areas n.2 removable filtering sections diam. 298 mm. sliding between 2 bronze rings operated by 2 push buttons termoregulated by control panel

Rulli macchine da stampa


Rollers for offset printing machines We are looking for expressions of interest to be submitted within the next 26 June 12:00 Nr. 20 rollers for web offset prints so detailed: Quantity 1 x KBA 618 MAC Quantity 2 x SUNDAY 64P Mac. initials H Quantity 2 x SUNDAY 64P Mac. abbreviation or Quantity 1 x SUNDAY 64P inc. the acronym Quantity 1 x SUNDAY 64P Mac. abbreviation P Quantity 1 x SUNDAY 64 DOS L Quantity 1 x SUNDAY 64 MAC H Quantity 1 x SUNDAY 64 INC the Quantity 1 x SUNDAY 64 INC J Quantity 2 x MHI 48 DOS WP Quantity 1 x Mitsubishi 48P inc. F1 abbreviation Quantity 2 x Mitsubishi 48P inc. acronym F2 Quantity 2 x Mitsubishi 48P inc. acronym F3 Quantity 2 x SUNDAY 64P dos. initials L For more information contact us at 0307751645 during office hours Mon. – Fri. 9-13:14-18

Murata 33H


We have 2 x Murata 33H texturizing machines for sale,nanufactured in 2000,240 2pindles.still wirking now.seriour buyers contact me

Shinohara 52-4


-Four colours Straight machine max size 37x52 cms. -Year 2008, Only 11 mil. impressions -Semi automatic plate change SPC -Shinohara Alcool continuous dampening with Baldwin cooling unit -Console with CIP 3 software installed, all automatic ink and plate registers PCC -Automatic blankets and rollers washers ABW -In production, any print test possible -Top conditions Included CTP SDP-ECO 1630 III R Platesetter: Computer to plate for plates in polyester and paper ( Silver- Digiplate ) -RIP Mitsubishi SDP-RIP, Intelcore 2 Quad Q 6600, Ram 2 Gb

Diesel generators Perkins 2306 - 365 KVA


Diesel generators Iveco V8 - 500 KVA


CNC Milling Centers DECKEL FP4NC


OVERVIEW: Brand: DECKEL Model: FP4NC Application type: Milling Machine type: Milling Machine Availability: Immediately Construction year: 1991 Production hours: 28000 Location: Netherlands Origin country: Germany CONTROL UNIT: Brand: Grundig Model: Dialog 11 MOVEMENT: X-AXIS movement: 560 mm Y-AXIS movement: 500 mm Z-AXIS movement: 450 mm

CNC Punching Machines AMADA EUROPE 255


OVERVIEW: Brand: AMADA Model: EUROPE 255 Application type: Punching Machine type: Turret Punching Machine Availability: Immediately Construction year: 2005 Production hours: 31646 Location: Spain Origin country: France CONTROL UNIT: Brand: GE FANUC Model: Series 18i-PB MOVEMENT: X-AXIS: Movement: 1250 mm Y-AXIS: Movement: 1250 mm

MACCHINARI ATTREZZATURE


For sale exclusively on next 26/06/2018, 10-30 hours in Bergamo (BS) For more information contact us at 030 – 7751645 between 9-13, 14-18 MACHINERY: -5 Slot machines -lot composed # 4 Jukebox with cd -Electric linkage ARMANNI MASTER LIGHT 105/29, capacity kg 1000 of 2001 -pallet truck 2000 kg pallet truck 2000 kg -lot workshop Equipment: -metal shelf L = 120, 6 2 uprights and shelves -Iron shelving, shelves and uprights 48 16 L = 120 -iron and wood stair with landing, 4 risers, trundle -Blue iron rack, 3 uprights H = 300, 2 uprights H = 250, 26 traverse L = 150 and 2 crossbars L = 120 -aluminium staircase with landing -Blue iron shelving H = 300, 21 2 uprights, crossbars L = 200, 118 traverse L = 120, 14 traverse L = 150....... ETC, etc, etc. -detailed catalogue Available.

Milling machining centres MORI SEIKI MH-633


OVERVIEW: Brand: MORI SEIKI Model: MH-633 Application type: Milling Machine type: Machining Center Availability: Immediately Construction year: 2008 Production hours: 9500 Location: Czech Republic Origin country: Japan CONTROL UNIT: Brand: MORI SEIKI Model: MSX-502III MOVEMENT: X-AXIS movement: 1050 mm Y-AXIS movement: 850 mm Z-AXIS movement: 920 mm

EDM Machines Makino EDNC65


OVERVIEW: Brand: Makino Model: EDNC65 Application type: EDM Machine type: Erosion Machine Availability: Immediately Construction year: 2004 Production hours: 15330 Location: China Origin country: Singapore CONTROL UNIT: Brand: Makino Model: MGH III MOVEMENT: X-AXIS: Movement: 650 mm Y-AXIS: Movement: 450 mm Z-AXIS: Movement: 350 mm

EDM Machines Makino EDNC65


OVERVIEW: Brand: Makino Model: EDNC65 Application type: EDM Machine type: Erosion Machine Availability: Immediately Construction year: 1995 Production hours: 25185 Location: China Origin country: Singapore CONTROL UNIT: Brand: Makino Model: MGF20 MOVEMENT: X-AXIS: Movement: 650 mm Y-AXIS: Movement: 450 mm Z-AXIS: Movement: 350 mm

CNC Turning Machines Colchester TORNADO 200


OVERVIEW: Brand: Colchester Model: TORNADO 200 Application type: Turning Machine type: Lathe Availability: Immediately Construction year: 1995 Production hours: 5900 Location: Germany Origin country: England GENERAL DATA: Measurements width: 2455 mm Measurements depth: 1420 mm Machine weight: 3000 kg MAIN DRIVE: Number of spindle: 1 Spindle speed range: 5000 1/min CONTROL UNIT: Brand: GE FANUC Model: Series O-T MOVEMENT: X-AXIS movement: 215 mm Z-AXIS movement: 400 mm WORKPIECE: Workpiece drm: 250 mm TURRET: Number of turrets: 12 TOOLS: Max tool diameter: 40 mm MEDIA: Power consumption: 45 kVA Chip conveyer: yes Internal cooling: yes ADDITIONAL EQUIPMENT: 1 - 29x Tool holder

ARREDI E MACCHINE UFFICIO


For sale exclusively on next 26/06/2018, 10-30 hours in Bergamo (BS) For more information contact us at 030 – 7751645 between 9-13, 14-18 Furniture: -fixed Chair in technical fabric and iron -two-seater sofa in blue fabric -Cabinet height = 140 with two laminated doors -double L-shaped desk workstation wood laminate -work station with double circular wood laminate desk with Appendix -L-shaped desk with wood laminate drawer unit -laminate and wood coloured iron -Cabinet with one door L = 215. ... ... ETC, ETC, ETC.

CNC Bending Machines Durma AD-S 30100


OVERVIEW: Brand: Durma Model: AD-S 30100 Application type: Bending Machine type: Bending Machine Availability: Immediately Construction year: 2013 Production hours: 18979 Location: Turkey Origin country: Turkey GENERAL DATA: Measurements width: 2600 mm Measurements depth: 4500 mm Measurements height: 3100 mm Machine weight: 9500 kg MAIN DRIVE: Pressing force: 100 kN Bending length: 3050 mm CONTROL UNIT: Brand: CYBELEC Model: ModEva 10S MEDIA: Main electronic connection: 400 V Power consumption: 11 kVA ADDITIONAL EQUIPMENT: 1 - Tools 2 - Back Guard with safety switch 3 - Laser Light Front Guards

Wire EDM Machine AGIE AGIECUT EVOLUTION 3


X-travel: 500mm, y-travel: 350mm, z-travel: 256mm, max. workpiece dimensions: 1050x550x250mm, max. workpiece weight with/without bath: 400/800kg, control: AGIEVISION, operational hours: ca. 130000h, including handling robot EROWA EASYHAND ROBOSET RS UNO-L.

Milling machine centers MORI SEIKI MV-45/40


OVERVIEW: Brand: MORI SEIKI Model: MV-45/40 Application type: Milling Machine type: Machining Center Availability: Immediately Construction year: 1986 Production hours: 28000 Location: Netherlands Origin country: Japan GENERAL DATA: Measurements width: 3800 mm Measurements depth: 3500 mm Measurements height: 3150 mm Machine weight: 8000 kg MAIN DRIVE: Number of spindle: 1 Spindle speed range: 6000 1/min CONTROL UNIT: Brand: Fanuc Model: 11M MOVEMENT: X-AXIS movement: 800 mm Y-AXIS movement: 460 mm Z-AXIS movement: 510 mm WORKPIECE: Workpiece drm: 160 mm Workpiece weight: 1000 kg TABLE: Outer length: 1200 mm Outer width: 460 mm TOOLS: Max weight: 20 kg Max tool diameter: 95 mm Max tool length: 300 mm MEDIA: Main electronic connection: 380 V Power consumption: 22 kVA Chip conveyer: yes Internal cooling: yes

Generators Atlas Copco QAS 200 VD


4 identical units available Electronic speed control: 50 HZ / 60 HZ Motor: 6 cylinder Volvo Diesel Motor type: TAD 733 GE Motor power: 179 kW / 50 HZ continious power Alternator: Mecc-Alte ECO 38 - 3S/4 Continious power: 200 kVA Hours of operation: Approx. 5500/6400/6600/7100 - April 2018

Generators Atlas Copco QAS 150


2 identical units available Electronic speed control: 50 HZ / 60 HZ Rated speed: 1500 / 1800 rpm Continious power: 150 / 165 kVA Net power: 132 / 140 kW Motor: 6 cylinder Volvo Diesel Motor type: TAD 731 GE Alternator: Mecc-Alte Hours of operation: Approx. 5900 and 6900 / April 2018

Belt Filter Press Rompf KRF 1700


Bandwidth: 1700 mm Throughput: Approx. 5 - 12 m3/h Scope of delivery: Control cabinet Powder polymer system Transverse conveyor 2 Eccentric screw pumps The belt filter press is dismantled and immediately available.

CHP Unit Viessmann Vitobloc 200 EM-140


Motor: MAN E 2876 E 312 Generator: Leroy-Somer Fuel type: Natural gas Electrical power: 140 kW Thermal power: 209 kW Hours of operation: Approx. 900 The unit is like new, was only used for test phase. All demage parts are reconditioned. Test run was carried out.

Diesel engines MWM DEUTZ TBD620V12


2 COGENERATION ENGINES: 2 X MWM-DEUTZ V12 TBD620 YEAR OF MANUFACTURE: 1999 HOURS: approx. 9000 OUTPUT: 1.3Mw ALTERNATOR: LEROY SOMER OUTPUT: 1260 KW / kVA 1300 COMPLETE PLANT •Generator (alternator, engine engine and PLC) •Gas train •Water cooling system (heat exchanger + complete pump) •Oil Cooling System (heat exchanger + complete pump) •Control Panels generator (DIANE) •Electrical control panel accessories (pumps, etc) •Technical Documentation

Bed Milling Machines HURON PU771


Universal Bed Millung machine HURON type PU 771 travels x y z 1900 x 1000 x 1000 mm Table size de 2230 x 700 mm Universal milling head Spindle SA 40 27 Spindle speed 30 to 2066 rpm with 2 Axis Dro Heidenhain

Universal Milling Machines HURON MU6


Universal millich machine HURON MU6 Travels x y z 1500 x 700 x 550 mm Table size 2000 x 460 mm Universal milling head 3 Axis Dro

EDM Machines Makino EDNC43


OVERVIEW: Brand: Makino Model: EDNC43 Application type: EDM Machine type: Erosion Machine Availability: Immediately Construction year: 1994 Production hours: 26280 Location: China Origin country: Singapore CONTROL UNIT: Brand: Makino Model: MGF20 MOVEMENT: X-AXIS: Movement: 450 mm Y-AXIS: Movement: 350 mm Z-AXIS: Movement: 350 mm

EDM Machines Makino EDNC106


OVERVIEW: Brand: Makino Model: EDNC106 Application type: EDM Machine type: Erosion Machine Availability: Immediately Construction year: 1992 Production hours: 37960 Location: China Origin country: Japan CONTROL UNIT: Brand: Makino Model: MGC3 MOVEMENT: X-AXIS: Movement: 1000 mm Y-AXIS: Movement: 600 mm Z-AXIS: Movement: 500 mm

EDM Machines Makino EDNC85


OVERVIEW: Brand: Makino Model: EDNC85 Application type: EDM Machine type: Erosion Machine Availability: Immediately Construction year: 1990 Production hours: 40880 Location: China Origin country: Japan CONTROL UNIT: Brand: Makino Model: MGW-JL MOVEMENT: X-AXIS: Movement: 800 mm Y-AXIS: Movement: 500 mm Z-AXIS: Movement: 400 mm

Self-Cleaning Disc Separators Alfa-Laval BRPX 417


BRPX 417: high speed vertical disc centrifuge Made from stainless steel for the food and beverage industry. Approximate capacity: 10000 liter/hour The bowl is mounted on a vertical spindle driven by a vertically mounted motor, via a belt drive ELECTRICAL CABINET AVAILABLE 2 UNITS AVAILABLE

bending pipe tube profile machine Tauring Delta 60 I CNC


production year 2011, 2012 first launch, new, maybe 5 hours the rolls were made to order for a special profiles from PVC/alluminium, there are no standard rolls on offer. The machine was bought with the appropriate rolls but it turned out that they are not suitable for a PVC/all. profiles for window joinery. abc.tauringroup.com/sites/default/files/delta60_low_0.pdf

EDM Machines Makino EDNC65


OVERVIEW: Brand: Makino Model: EDNC65 Application type: EDM Machine type: Erosion Machine Availability: Immediately Construction year: 1995 Production hours: 28185 Location: China Origin country: Japan GENERAL DATA: Measurements width: 3500 mm Measurements depth: 2800 mm Measurements height: 3000 mm Machine weight: 18000 kg MAIN DRIVE: Working current: 60 A Wire feed: 3000 mm/min CONTROL UNIT: Brand: Makino Model: MGF20 MOVEMENT: X-AXIS: Movement: 650 mm Y-AXIS: Movement: 450 mm Z-AXIS: Movement: 350 mm WORKPIECE: Workpiece weight: 1500 kg TABLE: Outer length: 800 mm Outer width: 550 mm MEDIA: Main electronic connection: 380 V

Pipe Bending Machines BLM SMART


OVERVIEW: Brand: BLM Model: SMART Application type: Bending Machine type: Bending Machine Availability: Immediately Construction year: 2015 Production hours: 948 Location: Estonia Origin country: Japan GENERAL DATA: Machine weight: 720 kg CONTROL UNIT: Brand: SIEMENS Model: SIMATIC HMI MEDIA: Main electronic connection: 400 V Power consumption: 11 kVA ADDITIONAL EQUIPMENT: 1 - BLM CARM7 Bar loader 2 - YASKAWA Motoman Robot

Vertical Milling Machines DECKEL FP4A


OVERVIEW: Brand: DECKEL Model: FP4A Application type: Milling Machine type: Milling Machine Availability: Immediately Construction year: 1991 Production hours: 32000 Location: Netherlands Origin country: Germany GENERAL DATA: Measurements width: 3000 mm Measurements depth: 2700 mm Measurements height: 1630 mm Machine weight: 1950 kg MAIN DRIVE: Number of spindle: 1 Spindle speed range: 4000 1/min CONTROL UNIT: Brand: Grundig Model: Dialog 11 MOVEMENT: X-AXIS movement: 560 mm Y-AXIS movement: 500 mm Z-AXIS movement: 390 mm WORKPIECE: Workpiece drm: 80 mm Workpiece x: 485 mm Workpiece y: 385 mm Workpiece z: 380 mm Workpiece weight: 800 kg TABLE: Outer length: 900 mm Outer width: 530 mm TOOLS: Max weight: 450 kg Max tool diameter: 40 mm Max tool length: 150 mm MEDIA: Main electronic connection: 380 V Power consumption: 16.5 kVA Internal cooling: yes ADDITIONAL EQUIPMENT: 1 - 1x Tool holder

Profile rollers SAF SE 101 HP


Auction name: Bankruptcy Voltman Construction B.V. in Nijverdal Online auction Start of auction: 18 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 30 May 2018 17:45 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions

Casting press URPEMAK URPE CC 50


Injection molding machine for aluminium URPEMAK URPE CC 50 built in 2005 the year in Spain. Foundry machine URPE URPEMAK CC 50-parameters: -clamping force: 500 kN -Road: 260 mm -the strength of the ejector: 62.8 kN -ejector stroke: 50 mm -height (min-max): 100/325 mm -dimensions: 500 x 500 mm -distance between columns: 320 x 290 mm -diameter: 60 mm -the position of the injection: 0-50 mm -the maximum force-cast: 50 kN -diameter of piston injection: 45-50-55 mm -feed cast: 140 mm -the surface of the casting: 159-196-238 cm2 the mass/volume of injection: 91-140-188 cm3 -injection pressure: 314-254-210 daN/cm2 -the feed piston: 150 mm -motor: 11 kW -weight: 4900 kg -dimensions: ok. 407 x 225 x 220 cm

Hydraulic Presses WEKO WE 680-2-20


Hydraulic presses WEKO in 680-2-20 was produced in 1997. Technical parameters: -clamping force: ok. 120 t -base form: 46 cm -distance between columns: 67 cm -making a stroke: 70 cm

Casting press URPEMAK URPE CFA 220


Foundry machine URPE URPEMAK CFA 220 produced in 2005 year in Spain. The price of the machine the crucible for melt aluminum, with a capacity of approx. 500 l, visible on the last photo. Injection molding machine for aluminium URPEMAK URPE CFA 220-technical parameters: -clamping force: 2250 kN -Road: 440 mm -the strength of the ejector: 120 kN -ejector stroke: 100 mm -height (min-max): 240/600 mm -dimensions: 780 x 780 mm -distance between columns: 510 x 510 mm -diameter: 90 mm -the position of the injection: 0-90-180 mm -the maximum force-cast: 121-250 kN -piston injection: 40-50-60-70 mm -feed cast: 360 mm -the surface of the casting: 113-714 cm2 the mass/volume of injection: 301-471-678-923 cm3 -injection pressure: 315-1990 daN/cm2 -engine: 20 kW -weight: 13000 kg -dimensions: ok. 590 x 238 x 275 cm

Guillotine shears Darley GS 3110


Auction name: Bankruptcy Voltman Construction B.V. in Nijverdal Online auction Start of auction: 18 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 30 May 2018 17:45 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions

Automatics (Lathes) For Bars Colchester TORNADO T8MS


OVERVIEW: Brand: Colchester Model: TORNADO T8MS Application type: Turning Machine type: Lathe Availability: Immediately Construction year: 2007 Production hours: 1112 Location: Latvia Origin country: United Kingdom GENERAL DATA: Measurements width: 1650 mm Measurements depth: 4000 + 1800 mm Measurements height: 1950 mm Machine weight: 5000 kg MAIN DRIVE: Number of spindles: 2 Spindle speed range: 5000 1/min CONTROL UNIT: Brand: GE Fanuc Model: Series 18i-TB MOVEMENT: X-AXIS movement: 240 mm Z-AXIS movement: 540 mm A-AXIS movement: 625 mm TURRET: Number of turrets: 12 MEDIA: Main electronic connection: 415 V / 53 A / 50 Hz / 3 P Chip conveyer: yes ADDITIONAL EQUIPMENT: 1 - Chip conveyer 2 - Bar loader 3 - Tools (upon request)

Circular press FPA PXW 100 AAb


Press obwiedniowa of varying matrix FPA PXW 100 AAb was built by the factory Automatic Presses Warsaw, Poland-Italy. FPA press-specific data PXW 100 AAb: largest diameter: 100 mm -pressure: 160 T -stroke: 140 mm -the amount of fluctuation matrix: 1500 l/min. -engine power: 17 kW -the engine speed: 3000 l/min. -pump motor power: 11 kW -the engine speed pump drive: 1000 l/min. -the power of pump motor battery: 0.8 kW -the engine speed pump battery: 1500 l/min. -weight of the machine: 53000 kg

CNC Bending Machines AMADA RG-100S


OVERVIEW: Brand: AMADA Model: RG-100S Application type: Bending Machine type: Bending Machine Availability: Immediately Construction year: 2002 Production hours: 29200 Location: China Country of origin: Japan GENERAL DATA: Measurements width: 2500 mm Measurements depth: 1800 mm Measurements height: 2550 mm Machine weight: 6400 kg CONTROL UNIT: Brand: AMADA Model: NV9EV II MAIN DRIVE: Bending length: 2500 mm

horizontal boxer press Euromac Digibend 360


EUROMAC punching Digibend 360 capacity 36 tonnes lengh of stroke 250 mm working speed 10/24-6 mm/sec hight bending 200 mm extra high bending 415 mm oil tank capacity 60 lt aprox 3-phases motor 5.5-4 (hp-kw) table 580 x 1170 mm size 680 x 1170 x 1130 mm weight 900 kg year 2000 CE The data are mechanically translated in the english language. Translation errors are possible. No guarantee for printed date and pricing. • Save up to 100 bend in machine memory. • Bend the guaranteed accurate to +/-0.05mm. • Automated for fast, precise production. • Reduce your set up time. • Adjusting the machine bending pressure or working speed. • Monoblock construction. • Maximum flexibility for bending application (up to 10 tooling) Benefits: • With Euromac punching bending machine, you can change over from one type of tooling to another quickly and easily. • Our bending table is machined from one piece tapered roller steel casting that's guaranteed for 5 year. • Our horizontal acting bending machines give you unlimited bending capabilities, without the risk of damaging your expensive press brake tooling. • Euromac punching bending machine are easy to program, easy to operate, and the cost of production is surprisingly low Well in good conditions of use, which ' can be seen connected and running, by appointment. Specification The RAM force-tonnage (KN) 36 (160) Length of stroke 250 mm Table dimension 1200x580mm Overall dimensions (W x D x H) 1250 x 650 x mm-1140 mm Weight 900 kg

Guillotine Shears STROJARNE PIESOK NTC 2000/4


Guillotine STROJARNE PIESOK NTC 2000/4 were produced in 1987. Shears allow cutting of materials with different strength such as steel, aluminium, copper, etc. The materials with a tensile strength of more than 450 MPa cut material thickness must be correspondingly reduced. In the case of less strength than the 450 MPa can cut materials with a greater thickness, which the breakdown does not exceed 8 mm. The thickness of the material to be cut, depending on the strength of: aluminum 200 MPa: 6 mm copper 250 MPa: 5.3 mm nickel 400 MPa: 4.2 mm steel 450 MPa: 4 mm steel 500 MPa: 3.8 mm brass 600 MPa: 3.4 mm steel 700 MPa: 3.2 mm steel 800 MPa: 3 mm Technical parameters of the guillotine NTC 2000/4: -maximum thickness sheet with pt = 450 MPa: 4 mm -maximum cutting length: 2050 mm -cutting angle: 1.33 degree -outreach in the stands: 200 mm -number of jumps continuous operation at idling speed: 60 RPM -the minimum thickness of the metal: 0.4 mm -the minimum width of the webs: 10s mm (s-thickness) -the maximum radius of curvature of the knife: 0, 05s mm (s-thickness) -cut on the rear bumper, the maximum width without brackets: 300s mm (s-thickness) -position the rear bumper: 4-750 mm -installed power: 5 kVA -the power of main motor: 4 kW -engine power bumper: 0.25 kW -overall dimensions of the device (l x w x h): 2600 x 1600 x 1500 mm -Cutter weight: 3400 kg -foot pedal -DTR, a technical-functional

Painting Line AEROTERM ULTRATERM UV 1100


Tunnel AEROTERM ULTRATERM UV 1100 were produced in 2002 year. The tunnel is designed to persist the paints and varnishes. It is equipped with independent air circulation, which holds the spring core at the time of the transition under the lamp. In the tunnels uses dichroic mirrors, filters, quartz and focus the rays, so drying temperature is significantly reduced. Through the use of mirrors and filters can be dry even thin films. Characteristic parameters of the tunnel AEROTERM ULTRATERM UV 1100: -working width: 1100 mm -material thickness: 0.15-50 mm -speed: 5-30 m/min. -the number of hours worked of the filaments: ok. 300 h -lamps: 6 filaments 120 W/cm (the ability to work in 60 in/cm) -fume extraction/ozone -conveyor belt on vacuum table

Universal Machining Center BURKHARDT WEBER MC 120 HV


X-travel: 1600mm, y-travel: 1250mm, z-travel: 1250mm, B-travel: 360°, max. table load: 5t, clamping surface: 2x 1000x800mm, with pallet changer.

Wheel loaders HSW 515 G


Loader HSW 515 G was built by Ironworks Stalowa Wola in 2009 year. HSW-specific data 515 G: -mileage: 30.000 mTh (hours) -engine: Cummins-after overhaul -weight-tires Good Year RL-5 k

WIDE BELT SANDER SCM SANDYA UNO CS SCM SANDYA UNO CS


Wide belt sanders Scm Sandya UNO CS working width mm. 900 nr. 2 units I° calibrator unit II° combinet roller/pad motor power KW 7,5 rpm 2800

CNC Long Turning Automatics POLYGIM DIAMOND 32 CSB SWISS TYPE


Automatic longitudinal turning Swiss POLYGIM DIAMOND CSB 32 SWISS TYPE was built in 2008. Technical data for CNC lathes POLYGIM DIAMOND CSB 32 SWISS TYPE: CNC Control: MITSUBISHI Working range: -maximum turning diameter: fi 33 mm -maximum turning length: 250 mm -the maximum diameter of drilling: fi 15 mm -the maximum diameter of the thread: M10 Processing of external diameters: -quantity: 5 PCs. -dimension of the CAP: 16 x 16 x 120 mm Treatment of internal diameter: -quantity: 4 PCs. -Sleeve dimension: 13 mm (ER20) Transverse driven tool:-number of tools: 3 PCs. -Sleeve dimension: 13 mm (ER20) -speed: 200-6000 RPM. Tools from the back to the internal diameter: -quantity: 4 PCs. -Sleeve dimension: 13 mm (ER20) Tool driven to face: -number of tools: 3 front, 3 rear -Sleeve dimension: 10 mm (ER16) -speed: 3000 rpm. Main spindle:-spindle bore diameter: fi 36 mm -spindle speed: 200-8000 RPM. -Spindle bore diameter: subspindle steals: fi 36 mm -spindle speed steals: 6000 RPM. -the maximum spindle stroke: 220 mm rapid feeds X, Y, Z: 18 m/min. Engines: -spindle motor: 5.5 kW -spindle motor steals: 1.5 kW -drive motors. X/Y/Z axis: 0.5 kW -Coolant pump motor: 0.55 kW -lubrication: 4 -power supply: 8.67 kW -the spindle axis height: 960 mm Machine dimensions:-overall dimensions: 2550 x 1140 x 1568 mm -weight: 2788 kg Compressed air supply: -Outlook: 10 l/min. -pressure: 5 kg/cm Equipment: -subspindle -lighting of the workspace -cooling system -orientation of przeciwwrzeciona every 5 degrees -sensor cut off part-receiver detail -Guide ring Rod fixed and Rotary -5 pieces of the outer surface of the turning handles -4 desktop holders for turning the inner surface of the -4-position for desktop tools for turning the inner surface of the rear -6-powered tool for working the transverse -3 to-powered tool to work from the front -3 to-powered tool to work from behind -automatic bar feeder: Fedek SUNNY 542 (3.2 m) -chip conveyor

Universal 5-Axis Machining Center MIKRON VCP/ UCP 710


X-travel: 700mm, y-travel: 600mm, z-travel: 400mm, clamping surface: 630x630mm, control: HEIDENHAIN TNC 430, length: 3400mm, width: 3500mm, height: 3500mm, weight: 10.5t.

Vertical Processing Centers DMG DMU 80 monoblock


Producer ..... DMG Year manufacture/Year overhaul ..... 2006 Control system Heidenhain ..... TNC 530 Clamping area of table ..... 1270x700 mm Travel X-axis ..... 980 mm Travel Y-axis ..... 630 mm Travel Z-axis ..... 630 mm Spindle speed ..... 20 - 12000 /min. Number of driven axes ..... 5 Cooling through spindle Pressure of cooling ..... 40 bar Spindle taper ..... SK 40 . Tool magazine Number of positions in magazine ..... 32 Max. load of table ..... 650 kg Control panel with handwheel, 3D probe, paper filtration. possible to test under power.
Get the latest machine offers by email: order newsletter