rotox calvet used for sale

see photos

Three-spindle copy and lock milling machine make ROTOX type KF 457Fabr. -No: 457 6870, year of construction approx. 1994Technical specifications:Max. Profile width: 125 mmMax. Profile height: 50 mmMilling path: 265 x 125 mmMilling shaft vertical: 12000 rpm.Milling shaft speed horizontal: 9000 rpm.Engine speed: 2800 rpm.Drive power, 2 drive motors each: 1.5 kWExternal dimensions: 730 x 680 x 1700 mmWeight approx: 180 kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Saw blade diameter: 500 mm profile height: 250 mm profile width: 400 mm jack height: 215 mm jack depth: 185 mm Material stop swivel between 22.5° and 157.5° Jack height can be adjusted by motor with digital display Motor adjustment of the angles with digital display Depth stop motor adjustable with digital display Automatic sawing sequence via control with preselection of the cutting angles Pneumatic material clamps Coolant lubrication

Three-spindle copying and lock milling machine make ROTOX type KF 457Year of construction 1993the ideal machine for lock machining: profile cylinder, pusher holeand lock case on all aluminum and PVC profiles in one clampingMax. Profile width: 125 mmMax. Profile height: 50 mmCutting path: 265 x 125 mmMilling shaft vertical: 12000 rpm.Milling shaft speed horizontal: 9000 rpm.Engine speed: 2800 rpm.Drive power, 2 drive motors a: 1.5 kWExternal dimensions: 730 x 680 x 1700 mmWeight approx.: 180 kgWith- 1 vertical cutter shaft- 2 horizontal milling shaftsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

2-spindle copy router for aluminum + steel make ROTOX type KF 155Machine -No: 1678, built in 1973Technical specifications:Milling length: 270 mmMilling width: 130 mmClamping width: 125 / 240 mmClamping height: 350 mm2 vertical milling speeds: 12000 / 6000 rpm.1 horizontal milling speed: 9000 / 4500 rpm.2 drive motors: 1.6 hp eachWeight: 140kgwith- 2 pneum. clamping cylinders- Spray device- 2 support armslittle used, despite the year of constructionin very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Corner cleaning machine for automatic deburring of weldson welded plastic frame make ROTOX type EPA 277Machine -No: 277 6217 Year 1992Max. Profile size: 160 x 150 mmminute Profile size: 30 x 30 mmFrame size min.:320 x 320 mmAir consumption: 200 l / minAir pressure: 6 - 8 barConnected load: 2.2 kWPower connection: 380 V, 50 HzWeight approx: 900 kgWith- aut. profile recognition- Profile edition page selectable- electronic PLC control- minimal processing timelittle used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Corner cleaning machine make ROTOX type EPA 275Fabr. -No: 275 680 built in 1984for deburring the welds on welded plastic framesTechnical specifications:Spindle 30 mmfor holding 2 milling setsMilling change automatically via push buttonFeed and height adjustment pneumaticBarometric pressure max.8 barelec. Connection 380 V, 50 Hz, 3.1 AWith:- Workpiece support tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Slotted tiller manufacturer ROTOX type FWS 386Fabr. -No: 386166, built in 1989for simultaneous milling of 2 offset slots in aluminum profiles1 milling motor: 0.6 KW2 wheel motors: 0.5 KWWeight: 200 kgSpeed: 17200 rpmWith- Cooling lubricationused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Used notching milling machine Manufacturer: ROTOX Type: SAF 163 Ma. No. 163093 built 1978 Power 2,2 kW Item location: 58730 Fröndenberg/Ruhr The machine can be visited. We will be happy to send you more photos by e-mail. A forklift/crane for loading is available. We reserve the right to prior sale. It is possible to expertly examine the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty / guarantee is excluded. The goods are sold ex location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out on your behalf. This offer is only aimed at traders, traders and leg ...

Water slot machine make ROTOX make FWSused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

- technically efficient, ready to work – after full service - pneumatic profile clamping - manual feed

ROTOX SZK 502 double head welding machine was manufactured in Germany in 2007. The machine designed to weld two 90° angle joints in one working cycle, achieves high process stability and optimum temperature of the welding plates and stop blades made of hardened stainless steel. Hollow PVC bar sections with a maximum length of 2550 mm are welded on a stable structure by two welding heads made of high-quality cast aluminium. The ROTOX double head welding machine weighs 550 kg. Technical specifications of ROTOX welding machine SZK 502 - machined parts: hollow PVC bar sections - maximum section length: 2550 mm - minimum section length: 440 mm - maximum section height: 160 mm - minimum section height: 30 mm - welding angle: 90° - welding stitch limitation: 2 mm - workpiece tensioning: pneumatic - screw spanner with hexagon socket 3 mm - jaw spanner 10/13 mm - control cabinet s ...

Water slot cutter Fabr. ROTOX Type FWS 386Fabr. -No: 3866160, year of construction 1993for simultaneous milling of 2 offset slots in aluminum profiles1 milling motor: 0.6 KW2 wheel motors: 0.5 KWWeight approx.: 200 kgSpeed: 17200 rpm.With- Cooling lubricationused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

There are 2 notching machines available. Rotox SAF 165, year of manufacture: 2007, saw blade diameter: 250mm, speed: 2800rpm, pressure: 6-7bar, weight: 273kg. Hanning BVH8K2, speed: 2700rpm.

Notching machine make ROTOX type SAF 164Machine -No: 164-839 built in 1985Technical specifications:machinable profile width: 50 - 300 mm 90 °machinable profile height: 50 - 180 mmMilling hole: 40 mmDrive power: 2.2 kWWith- Miter guide with 1 ° scale and gridused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Double head saw EMMEGI NORMA 400 TU/4 Screwing unit GEVO SE1-SA Double head welding machine URBAN AKS 1200 Single head welding machine PRESSTA EISELE APOLLO End milling machine HAFFNER AF 362 Drain slot milling machine ROTOX FWS 380 Copy router STB F130/S Corner cleaning machine STB WP-OF2 Glazing bead saw HAFFNER GL 172

- technically efficient, ready to work - after full service

Speeds: 6000 or 12000 rpm Processing: Steel or aluminium profiles Country of origin: Germany

Year: 2004 technically efficient, ready to work – after full service 3 engines pneumatic profile climping

A window and door production line with 7 machines is available. 1) 1.1) HT line: Horizontal four-head welding machine (HSM) Stürtz, year of construction: 2019. 1.2) 2 MC - 1 head cleaner Stürtz with tool carrier top and bottom, year of construction: 2009. Add-ons for frames and sashes, profile type: Veka, installation depths: 70mm/76mm/82mm/116mm, max. size: approx. 2600mm/4000mm. 2) HFL Kruba milling machine: 3-axis milling machine, year of manufacture: 2011. 3) Rotox GZS glazing bead saw, year of manufacture: 2011. 2000 pieces in 8 hours. With 10-pair loading magazine (corresponds to 20 glazing beads) and 20-pair automatic removal table (corresponds to 40 cut glazing beads). 4) Series line: 4.1) & 4.2) Vertical four-head welding machine Stürtz VSM-20/VSM26-Turbo with handling system, year of manufacture: 2019. 4.3) Horizontal four-head plastering machine Stürtz MC-H4K-30/26, year o ...

Equipped with: coolant system saw blades; double circular saw; pneumatic clamps; digital control and readout; supply conveyor; USB and RS232 interface; HSS 325x3x40 saw blade; separate 2 meter extra supply conveyor; PAY ATTENTION! The buyer is responsible for dismantling and moving out of this lot; No charging equipment available!